Return to L.sys CVS log

Up to [CSRG BSD Unix] / 42BSD / usr.bin / uucp / UUAIDS

Annotation of 42BSD/usr.bin/uucp/UUAIDS/L.sys, revision 1.1

1.1     ! root        1: #
        !             2: #      Example L.sys file
        !             3: # None of the below are guaranteed to be correct,
        !             4: # though it is hoped that they are.
        !             5: #
        !             6: #
        !             7: # The following entry indicates that system 'mcnc' can be called any time,
        !             8: # and is accessible over a hard-wired tty line (tty01) at 4800 baud.
        !             9: # The login sequence is:
        !            10: #      ""              expect nothing (sort of a kludge)
        !            11: #      ""              send carriage return
        !            12: #      ogin:--ogin:    look for 'login:', if not received send carriage return
        !            13: #                      and look again.
        !            14: #      Urti            login as Urti
        !            15: #      ssword:         look for Password:
        !            16: #      fatchance       supply the password.
        !            17: #
        !            18: mcnc Any DIR 4800 tty01 "" "" ogin:--ogin:--ogin: Urti ssword: fatchance
        !            19: #
        !            20: # The following entry shows that the machine 'rti-sel' can be called any time
        !            21: # via /dev/tty02 at 300 baud.  The send-expect sequence is complex
        !            22: # because it is operating a Racal-Vadic auto-dialer.  An easier method would
        !            23: # be to use the code supplied for a Vadic auto-dialer.  See the Notes.L.sys
        !            24: # and L-devices files.
        !            25: # This is an unusual use of send-expect, but shows its capabilities.
        !            26: #      ""              expect nothing
        !            27: #      \05             send ^E return (activate auto-dialer)
        !            28: #      *-\05-*        look for *, if no such reactivate dialer, and look again
        !            29: #      d               send 'd' to enter a phone number
        !            30: #      NUMBER?-d...    look for prompt from auto-dialer
        !            31: #      7654321\r\d     send number, then return, then pause, then return
        !            32: #      LINE            wait for modem to say 'ON LINE'
        !            33: #      \r\d\r          send return, pause, then send return again
        !            34: #      ogin:-\b-...    look for login, if not found send a 'break'
        !            35: #                      look again, if still not found send another 'break'
        !            36: #                      and look one more time before giving up.
        !            37: #
        !            38: rti-sel Any ttyh3 300 ttyh3 "" \05 *-\05-* d NUMBER?-d-NUMBER? 7654321\r\d LINE \r\d\r ogin:-\b-ogin:-\b-ogin: Urti ssword: fatchance
        !            39: #
        !            40: # The next entry is for a normal ACU.  uucp normally handles only a DN11.
        !            41: # However, the 'condevs.c' routine can be modified to handle any kind
        !            42: # of auto-dialer desired.  (This is, however, an awful part of uucp.)
        !            43: # Calls can be placed any day but only between 11pm and 8am.
        !            44: # The connection is 300 baud.
        !            45: #
        !            46: ftl-sel Any2300-0700 ACU 300 13057654321 ogin:--ogin: Urti ssword: fatchance
        !            47: #
        !            48: # The next entry is for a UNET (TM 3Com Corp.) TCP-IP connection.
        !            49: # There must be a #define UNET in uucp.h, and you must install
        !            50: # a 'uucpsrv' uucico server daemon in /etc/UNET.
        !            51: # uucpsrv, in uuaids, should be set[ug]id to uucp, so it can exec uucico.
        !            52: # Also, add an entry to /etc/UNET/UNET.servers, such as:
        !            53: #      33  uucpsrv  33
        !            54: # The '33' is the port number chosen for uucpsrv, which must match the
        !            55: # port number in the L.sys entry.
        !            56: # The fields are: remote uucpname, time-to-call, UNET, remote unetname,
        !            57: # and remote-server-port-number.
        !            58: # Sane installations will have identical uucp- and unet- names.
        !            59: #
        !            60: ncsu Any UNET ncsu 33
        !            61: #
        !            62: # If ncsu cannot be raised by the method above, use the ACU.
        !            63: # uucico tries each entry for ncsu in turn, until one of them connects.
        !            64: # Calls on the ACU are only permitted when phone rates are cheap.
        !            65: #
        !            66: ncsu Any2300-0700|Sa|Su0000-01700 ACU unused 987-6543  ogin:--ogin: Urti  ssword: fatchance

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.