|
|
1.1 root 1: .NH
2: Installation Under 4.2BSD
3: .PP
4: You are essentially on your own here.
5: Besides the steps outlined in sections one through three,
6: you must install the Vs100 device driver,
7: install an improved version of the pseudo-tty driver,
8: and even then you will run into an obscure TCP problem that will
9: cause X to be unreliable.
10: .PP
11: We have also decided that it is hazardous for most people to attempt
12: installation of the changes to init, getty and login required for automatic
13: login on the display.
14: Furthermore, due to local changes and version skew, we no longer have
15: a consistent set of sources for these programs for 4.2, and have no good
16: way to test any installation directions as we have been running these
17: changes for nearly a year on all our machines.
18: For these reasons, WE RECOMMEND UPGRADING to 4.3BSD or Ultrix 1.2 where
19: these changes are standard.
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.