|
|
1.1 ! root 1: This is an initial distribution of a working 4.2bsd version of the ! 2: Hyperchannel driver. ! 3: ! 4: Changes from the one distributed with 4.2 include: ! 5: ! 6: - it works ! 7: - ioctl was redone cause 4.2 limits the argument to 128 bytes ! 8: - better support for powerfail detection. ! 9: - route table now supports adapter loopback and remote end ! 10: A710 loopback ! 11: - an untested interface that should allow RAW packets to be ! 12: sent is provided. If you use it, let me know so I can ! 13: incorporate any required bug fixes into it. ! 14: - if you ifconfig the device if cleans out the send queue ! 15: for the device (e.g. it gets it "unstuck" and kicks the ! 16: state machine). ! 17: ! 18: The driver just got installed on one of our 780s on 5/8/84. ! 19: It's getting currently being installed on a couple of other 780s. ! 20: The company will be switching to it as machines convert to 4.2 bsd. ! 21: I've also tried it on a 750. ! 22: ! 23: NOTE: This driver assumes that you have installed the ARP modifications ! 24: posted to net.sources by Bill Shannon @ Sun. The changes are simple (in ! 25: if.c) and only affect the hyioctl routine. ! 26: ! 27: Steve Glaser ! 28: Tektronix Inc. ! 29: (503) 685-2562 ! 30: May 10, 1984 ! 31: [email protected] ARPANET/CSNET ! 32: tektronix!steveg UUCP
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.