![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to ckuker.mak CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [CSRG BSD Unix] / 43BSD / contrib / kermit|
Return to ckuker.mak CVS log | Up to [CSRG BSD Unix] / 43BSD / contrib / kermit |
1.1 root 1: # CKUKER.MAK, Version 2.04, 31 July 85
2: #
3: # -- Makefile to build C-Kermit for Unix and Unix-like systems --
4: #
5: # Read instructions below before proceeding, then
6: # rename this file to "makefile" or "Makefile", and then:
7: #
8: # for Berkeley Unix 4.x, "make bsd"
9: # for Berkeley Unix 2.9 (PDP-11), "make bsd29"
10: # for AT&T 3Bx systems, "make att3bx"
11: # for AT&T generic System III/System V, "make sys3" or "make sys3nid"
12: # for Bell Unix Version 7 (aka 7th Edition), "make v7"
13: # for Microsoft Xenix (/286, PC/AT, etc), "make xenix"
14: # for Interactive System III (PC/IX) on PC/XT, "make pcix"
15: # for Interactive Sys III on other systems, "make is3"
16: # for DEC Pro-350 with Pro/Venix V1.x, "make provx1"
17: # for DEC Pro-350 with Pro/Venix V2.0 (Sys V), "make sys3nid"
18: # for DEC Pro-380 with Pro/Venix V2.0 (Sys V), "make sys3" or "make sys3nid"
19: # for NCR Tower 1632, OS 1.02, "make tower1"
20: # for NCR Tower 1632 with System V, "make sys3"
21: # for Fortune 16:32, For:Pro 1.7, "make ft17"
22: # for Valid Scaldstar, "make valid"
23: # for BBN C/70 with IOS 2.0, "make c70"
24: # for Amdahl UTS 2.4 on IBM 370 series & compatible mainframes, "make uts24"
25: #
26: ##############################################################################
27: #
28: # Notes:
29: #
30: # In many cases, the -O (optimize) compiler switch is omitted. Feel free
31: # to add it if you trust your optimizer. The ckuus2.c module, in particular,
32: # tends to make optimizers blow up.
33: #
34: # "make bsd" should produce a working C-Kermit for both 4.1 and 4.2bsd
35: # on VAX, SUN, and Pyramid computers.
36: #
37: # Either "make sys3" or "make sys3nid" tendss to produce a working version on
38: # any ATT System III or System V system, including Motorola Four Phase, Callan
39: # Unistar, Cadmus, NCR Tower, HP9836 Series 200, Plexus, Masscomp/RTU,
40: # Heurikon, etc etc (for exceptions, see below; AT&T 3Bx systems have their
41: # own entry). As far as C-Kermit goes, there is no functional difference
42: # between ATT System III and System V, so there is no need for a separate
43: # "make sys5" entry.
44: #
45: # "make sys3nid" is equivalent to "make sys3" but leaves out the -i option,
46: # which is used indicate that separate instruction and data (text) spaces are
47: # to be used, as on a PDP-11. Some systems don't support this option, others
48: # may require it. If one of these options doesn't work on your System III
49: # or System V system, try the other.
50: #
51: # For version 7, several variables must be defined to the values
52: # associated with your system. BOOTNAME=/edition7 is the kernel image on
53: # okstate's Perkin-Elmer 3230. Others will probably be /unix. PROCNAME=proc
54: # is the name of the structure assigned to each process on okstate's system.
55: # This may be "_proc" or some other variation. See <sys/proc.h> for more info
56: # on your systems name conventions. NPROCNAME=nproc is the name of a
57: # Kernal variable that tells how many "proc" structures there are. Again
58: # this may be different on your system, but nproc will probably be somewhere.
59: # The variable NPTYPE is the type of the nproc variable -- int, short, etc.
60: # which can probably be gleaned from <sys/param.h>.
61: # The definition of DIRECT is a little more in depth. If nlist() returns,
62: # for "proc" only, the address of the array, then you should define DIRECT
63: # as it is below. If however, nlist() returns the address of a pointer to
64: # the array, then you should give DIRECT a null definition (DIRECT= ). The
65: # extern declaration in <sys/proc.h> should clarify this for you. If it
66: # is "extern struct proc *proc", then you should NOT define DIRECT. If it
67: # is "extern struct proc proc[]", then you should probably define DIRECT as
68: # it is below. See ckuv7.hlp for further information.
69: #
70: # For 2.9bsd, the makefile uses pcc rather than cc for compiles; that's what
71: # the CC and CC2 definitions are for. 2.9 support basically follows the 4.2
72: # path, except with a normal file system (file names 14 chars max).
73: #
74: # The v7 and 2.9bsd versions assume I&D space on a PDP-11. When building
75: # C-Kermit for v7 on a PDP-11, you should probably add the -i option to
76: # the link flags. Without I&D space, overlays would probably have to be
77: # used (or code mapping a`la Pro/Venix if that's available).
78: #
79: # Other systems require some special treatment:
80: #
81: # For HP9000 series 500, use "make sys3nid", but
82: # 1. In ckutio.c, don't #include <sys/file.h> or ioctl.h.
83: # 2. In ckufio.c, don't #include <sys/file.h>.
84: #
85: # For Ridge32 (ROS3.2), use "make sys3", but
86: # 1. Use "CFLAGS = -DUXIII -i -O" "LNKFLAGS = -i"
87: # 2. Don't #include <sys/file.h> in cku[tf]io.c.
88: #
89: # For Whitechapel MG-1 Genix 1.3, use "make bsd", but
90: # 1. In ckufio.c, have zkself() return 0 or call getpid, rather than getppid.
91: # 2. Wart reportedly can't process ckcpro.w; just work directly from ckcpro.c.
92: #
93: # For Altos 986 with Xenix 3.0, use "make sys3", but
94: # 1. Get rid of any "(void)"'s (they're only there for Lint anyway)
95: # 2. In ckcdeb.h, define CHAR to be "char" rather than "unsigned char".
96: #
97: ##############################################################################
98: #
99: # V7-specific variables.
100: # These are set up for Perkin-Elmer 3230 V7 Unix:
101: #
102: PROC=proc
103: DIRECT=
104: NPROC=nproc
105: NPTYPE=int
106: BOOTFILE=/edition7
107: #
108: # ( For TRS-80 Xenix, use PROC=_proc, DIRECT=-DDIRECT, NPROC=_Nproc,
109: # NPTYPE=short, BOOTFILE=/xenix )
110: #
111: ###########################################################################
112: #
113: # Compile and Link variables:
114: #
115: LNKFLAGS=
116: CC= cc
117: CC2= cc
118: #
119: ###########################################################################
120: #
121: # Dependencies Section:
122: #
123: make:
124: @echo 'Make what? You must tell which system to make C-Kermit for.'
125:
126: wermit: ckcmai.o ckucmd.o ckuusr.o ckuus2.o ckuus3.o ckcpro.o ckcfns.o \
127: ckcfn2.o ckucon.o ckutio.o ckufio.o ckudia.o ckuscr.o
128: $(CC2) $(LNKFLAGS) -o wermit ckcmai.o ckutio.o ckufio.o ckcfns.o \
129: ckcfn2.o ckcpro.o ckucmd.o ckuus2.o ckuus3.o ckuusr.o \
130: ckucon.o ckudia.o ckuscr.o
131:
132: ckcmai.o: ckcmai.c ckcker.h ckcdeb.h
133:
134: ckuusr.o: ckuusr.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h
135:
136: ckuus2.o: ckuus2.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h
137:
138: ckuus3.o: ckuus3.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h
139:
140: ckucmd.o: ckucmd.c ckucmd.h ckcdeb.h
141:
142: ckcpro.o: ckcpro.c ckcker.h ckcdeb.h
143:
144: ckcpro.c: ckcpro.w wart
145: ./wart ckcpro.w ckcpro.c
146:
147: ckcfns.o: ckcfns.c ckcker.h ckcdeb.h
148:
149: ckcfn2.o: ckcfn2.c ckcker.h ckcdeb.h
150:
151: ckufio.o: ckufio.c ckcker.h ckcdeb.h
152:
153: ckutio.o: ckutio.c ckcdeb.h
154:
155: ckucon.o: ckucon.c ckcker.h ckcdeb.h
156:
157: wart: ckwart.o
158: $(CC) $(LNKFLAGS) -o wart ckwart.o
159:
160: ckwart.o: ckwart.c
161:
162: ckudia.o: ckudia.c ckcker.h ckcdeb.h
163:
164: ckuscr.o: ckuscr.c ckcker.h ckcdeb.h
165: #
166: ###########################################################################
167: #
168: # Make commands for specific systems:
169: #
170: #
171: #Berkeley Unix 4.1 or 4.2 (and presumably also 4.3)
172: bsd:
173: make wermit "CFLAGS= -DBSD4 -DDEBUG -DTLOG"
174:
175:
176: #Berkeley Unix 2.8, 2.9 for PDP-11s with I&D space
177: bsd29:
178: make wermit "CFLAGS= -DV7 -DDEBUG -DTLOG" "LNKFLAGS= -i" "CC= pcc " \
179: "CC2= cc"
180:
181:
182: #Version 7 Unix
183: v7:
184: make wermit "CFLAGS=-DV7 -DDEBUG -DTLOG -DPROCNAME=\\\"$(PROC)\\\" \
185: -DBOOTNAME=\\\"$(BOOTFILE)\\\" -DNPROCNAME=\\\"$(NPROC)\\\" \
186: -DNPTYPE=$(NPTYPE) $(DIRECT)"
187:
188: #In case they type "make sys5"...
189: sys5:
190: make sys3
191:
192:
193: #Generic ATT System III or System V (with I&D space)
194: sys3:
195: make wermit "CFLAGS = -DUXIII -DDEBUG -DTLOG -i -O" "LNKFLAGS = -i"
196:
197:
198: #Generic ATT System III or System V (no I&D space)
199: sys3nid:
200: make wermit "CFLAGS = -DUXIII -DDEBUG -DTLOG -O" "LNKFLAGS ="
201:
202:
203: #AT&T 3B-series computers running System V
204: # Only difference from sys3 is lock file stuff...
205: att3bx:
206: make wermit "CFLAGS = -DUXIII -DATT3BX -DDEBUG -DTLOG -i -O" \
207: "LNKFLAGS = -i"
208:
209:
210: #Microsoft "Xenix/286" e.g. for IBM PC/AT
211: xenix:
212: make wermit "CFLAGS= -DXENIX -DUXIII -DDEBUG -DTLOG -F 3000 -i" \
213: "LNKFLAGS = -F 3000 -i"
214:
215:
216: #PC/IX, Interactive Corp System III for IBM PC/XT
217: pcix:
218: make wermit \
219: "CFLAGS= -DPCIX -DUXIII -DISIII -DDEBUG -DTLOG -Dsdata=sdatax -O -i" \
220: "LNKFLAGS = -i"
221:
222:
223: #Interactive Corp System III port in general --
224: is3:
225: make wermit \
226: "CFLAGS = -DISIII -DUXIII -DDEBUG -DTLOG -Ddata=datax -O -i" \
227: "LNKFLAGS = -i"
228:
229:
230: #DEC Pro-3xx with Pro/Venix V1.0 or V1.1
231: # Requires code-mapping on non-I&D-space 11/23 processor, plus some
232: # fiddling to get interrupt targets into resident code section.
233: provx1:
234: make wart "CFLAGS= -DPROVX1" "LNKFLAGS= "
235: make wermit "CFLAGS = -DPROVX1 -DDEBUG -DTLOG -md780" \
236: "LNKFLAGS= -u _sleep -lc -md780"
237:
238:
239: #NCR Tower 1632, OS 1.02
240: tower1:
241: make wermit "CFLAGS= -DDEBUG -DTLOG -DTOWER1"
242:
243: #Fortune 16:32, For:Pro 1.7 (mostly like 4.1bsd)
244: ft17:
245: make wermit "CFLAGS= -DDEBUG -DTLOG -DBSD4 -DFT17"
246:
247:
248: #Valid Scaldstar
249: #Berkeleyish, but need to change some variable names.
250: valid:
251: make wermit "CFLAGS= -DBSD4 -Dcc=ccx -DFREAD=1"
252:
253:
254: #Amdahl UTS 2.4 on IBM 370 series compatible mainframes.
255: #Mostly like V7, but can't do initrawq() buffer peeking.
256: uts24:
257: make wermit "CFLAGS=-DV7 -DDEBUG -DTLOG -DPROCNAME=\\\"$(PROC)\\\" \
258: -DUTS24 -DBOOTNAME=\\\"$(BOOTFILE)\\\" -DNPROCNAME=\\\"$(NPROC)\\\" \
259: -DNPTYPE=$(NPTYPE) $(DIRECT)"
260:
261:
262: #BBN C/70 with IOS 2.0
263: #Mostly Berkeley-like, but with some ATTisms
264: c70:
265: make wermit "CFLAGS= -DBSD4 -DC70 -DDEBUG -DTLOG"
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.