![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to 05dbu.nr CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [CSRG BSD Unix] / 43BSD / ingres / doc / error|
Return to 05dbu.nr CVS log | Up to [CSRG BSD Unix] / 43BSD / ingres / doc / error |
1.1 ! root 1: .th DBU ERROR 3/30/79 ! 2: .sh NAME ! 3: Data Base Utility error message summary ! 4: .sh SYNOPSIS ! 5: Error numbers 5000 \- 5999 ! 6: .sh DESCRIPTION ! 7: The Data Base Utility functions ! 8: perform almost all tasks ! 9: which are not directly associated ! 10: with processing queries. ! 11: The error messages which they can generate ! 12: result from some syntax checking ! 13: and a considerable amount of semantic checking. ! 14: .sh ERRORS ! 15: .lp +8 8 ! 16: 5001 PRINT: bad relation name %0 ! 17: .s3 ! 18: You are trying to print a relation which doesn't exist. ! 19: .s3 ! 20: .lp +8 8 ! 21: 5002 PRINT: %0 is a view and can't be printed ! 22: .s3 ! 23: The only way to print a view ! 24: is by retrieving it. ! 25: .s3 ! 26: .lp +8 8 ! 27: 5003 PRINT: Relation %0 is protected. ! 28: .s3 ! 29: You are not authorized to access this relation. ! 30: .s3 ! 31: .lp +8 8 ! 32: 5102 CREATE: duplicate relation name %0 ! 33: .s3 ! 34: You are trying to create a relation which already exists. ! 35: .s3 ! 36: .lp +8 8 ! 37: 5103 CREATE: %0 is a system relation ! 38: .s3 ! 39: You cannot create a relation with the same name as a system relation. ! 40: The ! 41: system depends on the fact that the system relations are unique. ! 42: .s3 ! 43: .lp +8 8 ! 44: 5104 CREATE %0: invalid attribute name %1 ! 45: .s3 ! 46: This will happen if you try to create a relation with an attribute longer ! 47: than 12 characters. ! 48: .s3 ! 49: .lp +8 8 ! 50: 5105 CREATE %0: duplicate attribute name %1 ! 51: .s3 ! 52: Attribute names in a relation must be unique. ! 53: You are trying to create one ! 54: with a duplicated name. ! 55: .s3 ! 56: .lp +8 8 ! 57: 5106 CREATE %0: invalid attribute format "%2" on attribute %1 ! 58: .s3 ! 59: The allowed formats for a domain are c1\-c255, i1, i2, i4, f4 and f8. ! 60: Any other ! 61: format will generate this error. ! 62: .s3 ! 63: .lp +8 8 ! 64: 5107 CREATE %0: excessive domain count on attribute %1 ! 65: .s3 ! 66: A relation cannot have more than 49 domains. ! 67: The origin of this magic number ! 68: is obscure. ! 69: This is very difficult to change. ! 70: .s3 ! 71: .lp +8 8 ! 72: 5108 CREATE %0: excessive relation width on attribute %1 ! 73: .s3 ! 74: The maximum number of bytes allowed in a tuple is 1010. ! 75: This results from the ! 76: decision that a tuple must fit on one \*(UU "page". ! 77: Assorted pointers ! 78: require the 14 bytes which separates 1010 from 1024. ! 79: This "magic number" is ! 80: very hard to change. ! 81: .s3 ! 82: .lp +8 8 ! 83: 5201 DESTROY: %0 is a system relation ! 84: .s3 ! 85: The system would immediately stop working if you were allowed to do this. ! 86: .s3 ! 87: .lp +8 8 ! 88: 5202 DESTROY: %0 does not exist or is not owned by you ! 89: .s3 ! 90: To destroy a relation, ! 91: it must exist, ! 92: and you must own it. ! 93: .s3 ! 94: .lp +8 8 ! 95: 5203 DESTROY: %0 is an invalid integrity constraint identifier ! 96: .s3 ! 97: Integers given do not identify integrity constraints on the specified relation. ! 98: For example: If you were to type "destroy permit parts 1, 2, 3", ! 99: and 1, 2, or 3 were not the numbers "help permit parts" ! 100: prints out for permissions on parts, you would get this error. ! 101: .s3 ! 102: .lp +8 8 ! 103: 5204 DESTROY: %0 is an invalid protection constraint identifier ! 104: .s3 ! 105: Integers given do not identify protection constraints on the specified relation. ! 106: Example as for error 5203. ! 107: .s3 ! 108: .lp +8 8 ! 109: 5300 INDEX: cannot find primary relation ! 110: .s3 ! 111: The relation does not exist \- check your spelling. ! 112: .s3 ! 113: .lp +8 8 ! 114: 5301 INDEX: more than maximum number of domains ! 115: .s3 ! 116: A secondary index can be created on at most six domains. ! 117: .s3 ! 118: .lp +8 8 ! 119: 5302 INDEX: invalid domain %0 ! 120: .s3 ! 121: You have tried to create an index ! 122: on a domain which does not exist. ! 123: .s3 ! 124: .lp +8 8 ! 125: 5303 INDEX: relation %0 not owned by you ! 126: .s3 ! 127: You must own relations ! 128: to put indicies on them. ! 129: .s3 ! 130: .lp +8 8 ! 131: 5304 INDEX: relation %0 is already an index ! 132: .s3 ! 133: \*(II does not permit tertiary indicies. ! 134: .s3 ! 135: .lp +8 8 ! 136: 5305 INDEX: relation %0 is a system relation ! 137: .s3 ! 138: Secondary indices cannot be created on system relations. ! 139: .s3 ! 140: .lp +8 8 ! 141: 5306 INDEX: %0 is a view and an index can't be built on it ! 142: .s3 ! 143: Since views are not physically stored ! 144: in the database, ! 145: you cannot build indicies on them. ! 146: .s3 ! 147: .lp +8 8 ! 148: 5401 HELP: relation %0 does not exist ! 149: .s3 ! 150: .lp +8 8 ! 151: 5402 HELP: cannot find manual section "%0" ! 152: .s3 ! 153: Either the desired manual section does not exist, ! 154: or your system does not have any on-line documentation. ! 155: .s3 ! 156: .lp +8 8 ! 157: 5403 HELP: relation %0 is not a view ! 158: .s3 ! 159: Did a "help view" (which prints view definition) on a nonview. ! 160: For example: "help view overpaidv" prints out overpaidv's view definition. ! 161: .s3 ! 162: .lp +8 8 ! 163: 5404 HELP: relation %0 has no permissions on it granted ! 164: .lp +8 8 ! 165: 5405 HELP: relation %0 has no integrity constraints on it ! 166: .s3 ! 167: You have tried to print the permissions ! 168: or integrity constraints ! 169: on a relation ! 170: which has none specified. ! 171: .s3 ! 172: .lp +8 8 ! 173: 5410 HELP: tree buffer overflowed ! 174: .lp +8 8 ! 175: 5411 HELP: tree stack overflowed ! 176: .s3 ! 177: Still more buffer overflows. ! 178: .s3 ! 179: .lp +8 8 ! 180: 5500 MODIFY: relation %0 does not exist ! 181: .s3 ! 182: .lp +8 8 ! 183: 5501 MODIFY: you do not own relation %0 ! 184: .s3 ! 185: You cannot modify ! 186: the storage structure ! 187: of a relation you do not own. ! 188: .s3 ! 189: .lp +8 8 ! 190: 5502 MODIFY %0: you may not provide keys on a heap ! 191: .s3 ! 192: By definition, ! 193: heaps do not have keys. ! 194: .s3 ! 195: .lp +8 8 ! 196: 5503 MODIFY %0: too many keys provided ! 197: .s3 ! 198: You can only have ! 199: 49 ! 200: keys on any relation. ! 201: .s3 ! 202: .lp +8 8 ! 203: 5504 MODIFY %0: cannot modify system relation ! 204: .s3 ! 205: System relations can only be modified ! 206: by using the ! 207: .it sysmod ! 208: command to the shell; ! 209: for example ! 210: .s3 ! 211: sysmod ! 212: .it dbname ! 213: .s3 ! 214: .lp +8 8 ! 215: 5507 MODIFY %0: duplicate key "%1" ! 216: .s3 ! 217: You may only specify a domain as a key once. ! 218: .s3 ! 219: .lp +8 8 ! 220: 5508 MODIFY %0: key width (%1) too large for isam ! 221: .s3 ! 222: When modifying a relation to isam, the sum of the ! 223: width of the key fields cannot exceed 245 bytes. ! 224: .s3 ! 225: .lp +8 8 ! 226: 5510 MODIFY %0: bad storage structure "%1" ! 227: .s3 ! 228: The valid storage structure names are heap, cheap, isam, ! 229: cisam, hash, and chash. ! 230: .s3 ! 231: .lp +8 8 ! 232: 5511 MODIFY %0: bad attribute name "%1" ! 233: .s3 ! 234: You have specified an attribute ! 235: that does not exist ! 236: in the relation. ! 237: .s3 ! 238: .lp +8 8 ! 239: 5512 MODIFY %0: "%1" not allowed or specified more than once ! 240: .s3 ! 241: You have specified a parameter ! 242: which conflicts with another parameter, ! 243: is inconsistant with the storage mode, ! 244: or which has already been specified. ! 245: .s3 ! 246: .lp +8 8 ! 247: 5513 MODIFY %0: fillfactor value %1 out of bounds ! 248: .s3 ! 249: .it Fillfactor ! 250: must be between 1 and 100 percent. ! 251: .s3 ! 252: .lp +8 8 ! 253: 5514 MODIFY %0: minpages value %1 out of bounds ! 254: .s3 ! 255: .it Minpages ! 256: must be greater than zero. ! 257: .s3 ! 258: .lp +8 8 ! 259: 5515 MODIFY %0: "%1" should be "fillfactor", "maxpages", or "minpages" ! 260: .s3 ! 261: You have specified an unknown parameter ! 262: to ! 263: .it modify. ! 264: .s3 ! 265: .lp +8 8 ! 266: 5516 MODIFY %0: maxpages value %1 out of bounds ! 267: .s3 ! 268: .lp +8 8 ! 269: 5517 MODIFY %0: minpages value exceeds maxpages value ! 270: .s3 ! 271: .lp +8 8 ! 272: 5518 MODIFY %0: invalid sequence specifier "%1" for domain %2. ! 273: .s3 ! 274: Sequence specifier may be ``ascending'' ! 275: (or ``a'') ! 276: or ``descending'' ! 277: (or ``d'') ! 278: in a ! 279: .it modify. ! 280: For example: ! 281: .s3 ! 282: .nf ! 283: modify parts to heapsort on ! 284: pnum:ascending, ! 285: pname:descending ! 286: .fi ! 287: .s3 ! 288: .lp +8 8 ! 289: 5519 MODIFY: %0 is a view and can't be modified ! 290: .s3 ! 291: Only physical relations can be modified. ! 292: .s3 ! 293: .lp +8 8 ! 294: 5520 MODIFY: %0: sequence specifier "%1" on domain %2 ! 295: is not allowed with the specified storage structure. ! 296: .s3 ! 297: Sortorder may be supplied only when modifying to ! 298: .bd heapsort ! 299: or ! 300: .bd cheapsort. ! 301: .s3 ! 302: .lp +8 8 ! 303: 5600 SAVE: cannot save system relation "%0" ! 304: .s3 ! 305: System relations have no save date and ! 306: are guaranteed to stay for the lifetime of the data base. ! 307: .s3 ! 308: .lp +8 8 ! 309: 5601 SAVE: bad month "%0" ! 310: .lp +8 8 ! 311: 5602 SAVE: bad day "%0" ! 312: .lp +8 8 ! 313: 5603 SAVE: bad year "%0" ! 314: .s3 ! 315: This was a bad month, bad day, or maybe even a bad year ! 316: for \*(II. ! 317: .s3 ! 318: .lp +8 8 ! 319: 5604 SAVE: relation %0 does not exist or is not owned by you ! 320: .s3 ! 321: .lp +8 8 ! 322: 5800 COPY: relation %0 doesn't exist ! 323: .s3 ! 324: .lp +8 8 ! 325: 5801 COPY: attribute %0 in relation %1 doesn't exist ! 326: or it has been listed twice ! 327: .s3 ! 328: .lp +8 8 ! 329: 5803 COPY: too many attributes ! 330: .s3 ! 331: Each dummy domain and real domain listed in the copy statement ! 332: count as one attribute. ! 333: The limit is 150 attributes. ! 334: .s3 ! 335: .lp +8 8 ! 336: 5804 COPY: bad length for attribute %0. Length="%1" ! 337: .s3 ! 338: .lp +8 8 ! 339: 5805 COPY: can't open file %0 ! 340: .s3 ! 341: On a copy "from", the file is not readable by the user. ! 342: .s3 ! 343: .lp +8 8 ! 344: 5806 COPY: can't create file %0 ! 345: .s3 ! 346: On a copy "into", the file is not creatable by ! 347: the user. ! 348: This is usually caused by the user not having write ! 349: permission in the specified directory. ! 350: .s3 ! 351: .lp +8 8 ! 352: 5807 COPY: unrecognizable dummy domain "%0" ! 353: .s3 ! 354: On a copy "into", a dummy domain name is used to ! 355: insert certain characters into the unix file. ! 356: The domain name given is not valid. ! 357: .s3 ! 358: .lp +8 8 ! 359: 5808 COPY: domain %0 size too small for conversion. ! 360: .br ! 361: There were %2 tuples successfully copied from %3 into %4 ! 362: .s3 ! 363: When doing any copy except character to character, ! 364: copy checks that the field is large enough ! 365: to hold the value being copied. ! 366: .s3 ! 367: .lp +8 8 ! 368: 5809 COPY: bad input string for domain %0. Input was "%1". ! 369: There were %2 tuples successfully copied from %3 into %4 ! 370: .s3 ! 371: This occurs when converting character strings to ! 372: integers or floating point numbers. ! 373: The character string contains something other ! 374: than numeric characters (0-9,+,\*-,blank,etc.). ! 375: .s3 ! 376: .lp +8 8 ! 377: 5810 COPY: unexpected end of file while filling domain %0. ! 378: .br ! 379: There were %1 tuples successfully copied from %2 into %3 ! 380: .s3 ! 381: .lp +8 8 ! 382: 5811 COPY: bad type for attribute %0. Type="%1" ! 383: .s3 ! 384: The only accepted types are i, f, c, and d. ! 385: .s3 ! 386: .lp +8 8 ! 387: 5812 COPY: The relation "%0" has a secondary index. ! 388: The index(es) must be destroyed before doing a copy "from" ! 389: .s3 ! 390: Copy cannot update secondary indices. ! 391: Therefore, a copy "from" cannot be done on an indexed relation. ! 392: .s3 ! 393: .lp +8 8 ! 394: 5813 COPY: You are not allowed to update the ! 395: relation %0 ! 396: .s3 ! 397: You cannot copy into a system relation or secondary index. ! 398: .s3 ! 399: .lp +8 8 ! 400: 5814 COPY: You do not own the relation %0. ! 401: .s3 ! 402: You cannot use copy to update a relation ! 403: which you do not own. ! 404: A copy "into" is allowed but a copy "from" is not. ! 405: .s3 ! 406: .lp +8 8 ! 407: 5815 COPY: An unterminated "c0" field occurred while filling domain %0. ! 408: There were %1 tuples successfully copied from %2 into %3 ! 409: .s3 ! 410: A string read on a copy "from" using the ! 411: "c0" option cannot be longer than 1024 characters. ! 412: .s3 ! 413: .lp +8 8 ! 414: 5816 COPY: The full pathname must be specified for ! 415: the file %0 ! 416: .s3 ! 417: The file name for copy must start with a "/". ! 418: .s3 ! 419: .lp +8 8 ! 420: 5817 COPY: The maximum width of the output file cannot ! 421: exceed 1024 bytes per tuple ! 422: .s3 ! 423: The amount of data to be output ! 424: to the file for each tuple exceeds ! 425: 1024. ! 426: This usually happens only if a format was ! 427: mistyped or a lot of large ! 428: dummy domains were specified. ! 429: .s3 ! 430: .lp +8 8 ! 431: 5818 COPY: %0 is a view and can't be copied ! 432: .s3 ! 433: Only physical relations ! 434: can be copied. ! 435: .s3 ! 436: .lp +8 8 ! 437: 5819 COPY: Warning: %0 duplicate tuples were ignored. ! 438: .s3 ! 439: On a copy "from", duplicate tuples were present in the relation. ! 440: .s3 ! 441: .lp +8 8 ! 442: 5820 COPY: Warning: %0 domains had control characters ! 443: which were converted to blanks. ! 444: .s3 ! 445: .lp +8 8 ! 446: 5821 COPY: Warning: %0 c0 character domains were truncated. ! 447: .s3 ! 448: Character domains in c0 format are of the same length as the ! 449: domain length. You had a domain value greater than this ! 450: length, and it was truncated. ! 451: .s3 ! 452: .lp +8 8 ! 453: 5822 COPY: Relation %0 is protected. ! 454: .s3 ! 455: You are not authorized to access this relation.
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.