Return to libq.nr CVS log

Up to [CSRG BSD Unix] / 43BSD / ingres / doc / files

Annotation of 43BSD/ingres/doc/files/libq.nr, revision 1.1

1.1     ! root        1: .th LIBQ FILES
        !             2: .sh NAME
        !             3: libq \- Equel run-time support library
        !             4: .sh DESCRIPTION
        !             5: .it Libq is the equel run-time support library containing
        !             6: all the routines necessary for an equel program to load.
        !             7: It typically resides in
        !             8: .bd /usr/lib/libq.a,
        !             9: and must be specified when loading
        !            10: equel pre-processed object code.
        !            11: It may be referenced on the
        !            12: command line of 
        !            13: .it cc
        !            14: by the abbreviation 
        !            15: .bd \-lq.
        !            16: .s3
        !            17: Several useful routines 
        !            18: which are used by equel processes are included in the library.
        !            19: These may be employed by the equel programmer to avoid code
        !            20: duplication.
        !            21: They are:
        !            22: .ne 20
        !            23: .nf
        !            24: 
        !            25: int    IIatoi(buf, i)
        !            26: char   *buf;
        !            27: int    i;
        !            28: 
        !            29: char   *IIbmove(source, destination, len)
        !            30: char   *source, *destination;
        !            31: int    len;
        !            32: 
        !            33: char   *IIconcatv(buf, arg1, arg2, ..., 0)
        !            34: char   *buf, *arg1, ...;
        !            35: 
        !            36: char   *IIitos(i)
        !            37: int    i;
        !            38: 
        !            39: int    IIsequal(s1, s2)
        !            40: char   *s1, *s2;
        !            41: 
        !            42: int    IIlength(string)
        !            43: char   *string;
        !            44: 
        !            45: IIsyserr(string, arg1, arg2, ...);
        !            46: char   *string;
        !            47: 
        !            48: .fi
        !            49: .in +5
        !            50: .de xx
        !            51: .s3
        !            52: .lp +12 12
        !            53: \\$1\t\c
        !            54: ..
        !            55: .xx IIatoi
        !            56: IIatoi is equivalent to atoi(UTIL).
        !            57: .xx IIbmove
        !            58: Moves
        !            59: .it len
        !            60: bytes from
        !            61: .it source
        !            62: to 
        !            63: .it destination\c
        !            64: \&, returning a pointer to the location after the last byte moved.
        !            65: Does not append a null byte.
        !            66: .xx IIconcatv
        !            67: Concatenates into 
        !            68: .it buf
        !            69: all of its arguments, returning a pointer to 
        !            70: the null byte at the end of the concatenation.
        !            71: .it Buf
        !            72: may not be equal to any of the arg-n but arg1.
        !            73: .xx IIitos
        !            74: IIitos is equivalent to itoa(III).
        !            75: .xx IIsequal
        !            76: Returns 1 iff strings s1 is identical to s2.
        !            77: .xx IIlength
        !            78: Returns max(length of
        !            79: .it string
        !            80: without null byte at end, 255)
        !            81: .xx IIsyserr
        !            82: IIsyserr is diferrent from syserr(util) only in that
        !            83: it will print the name in IIproc_name, and in that there is no 0 mode.
        !            84: Also, it will always call exit(\*-1) after printing the error message.
        !            85: .i0
        !            86: .s3
        !            87: There are also some global Equel variables which may be manipulated by the
        !            88: user:
        !            89: .ne 5
        !            90: .nf
        !            91: 
        !            92: int    IIerrflag;
        !            93: char   *IImainpr;
        !            94: char   (*IIprint_err)();
        !            95: int    IIret_err();
        !            96: int    IIno_err();
        !            97: 
        !            98: .fi
        !            99: .in +5
        !           100: .xx IIerrflag
        !           101: Set on an error from \*(II to be the error number (see
        !           102: the error message section of the ``\*(II Reference Manual'') that ocurred.
        !           103: This remains valid from the time the error occurrs to the time when
        !           104: the next equel statement is issued.
        !           105: This may be used just after an equel statement to see if it succeded.
        !           106: .xx IImainpr
        !           107: This is a string which determines which ingres to call when a 
        !           108: "## ingres" is issued. Initially it is "/usr/bin/ingres".
        !           109: .xx IIprint_err
        !           110: This function pointer is used to call a function which determines 
        !           111: what (if any) error message should be printed when an ingres error
        !           112: occurs. It is called from IIerror() with the error number as an
        !           113: argument, and the error message corresponding to the error number
        !           114: returned will be printed.
        !           115: If (*IIprint_err)(\c
        !           116: .it <errno>\c
        !           117: ) returns 0, then no error message will be printed.
        !           118: Initially IIprint_err is set to IIret_err() to print the error
        !           119: that ocurred.
        !           120: .xx IIret_err
        !           121: Returns its single integer argument. Used to have (*IIprint_err)()
        !           122: cause printing of the error that ocurred.
        !           123: .xx IIno_err
        !           124: Returns 0. Used to have (*IIprint_err)() suppress error message printing.
        !           125: IIno_err is used when an error in a parametrized equel statemenr occurs
        !           126: to suppress printing of the corresponding parser error.
        !           127: .sh "SEE ALSO"
        !           128: atoi(util),
        !           129: bmove(util),
        !           130: cc(I),
        !           131: equel(unix),
        !           132: exit(II),
        !           133: itoa(III),
        !           134: length(util),
        !           135: sequal(util),
        !           136: syserr(util)

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.