|
|
1.1 root 1: /*
2: * Copyright (c) 1982, 1986 Regents of the University of California.
3: * All rights reserved. The Berkeley software License Agreement
4: * specifies the terms and conditions for redistribution.
5: *
6: * @(#)up.c 7.1 (Berkeley) 6/5/86
7: */
8:
9: /*
10: * UNIBUS peripheral standalone driver
11: * with ECC correction and bad block forwarding.
12: * Also supports header operation and write
13: * check for data and/or header.
14: */
15: #include "../h/param.h"
16: #include "../h/inode.h"
17: #include "../h/fs.h"
18: #include "../h/dkbad.h"
19: #include "../h/vmmac.h"
20:
21: #include "../vax/pte.h"
22: #include "../vaxuba/upreg.h"
23: #include "../vaxuba/ubareg.h"
24:
25: #include "saio.h"
26: #include "savax.h"
27:
28: #define RETRIES 27
29:
30: #define MAXBADDESC 126 /* max number of bad sectors recorded */
31: #define SECTSIZ 512 /* sector size in bytes */
32: #define HDRSIZ 4 /* number of bytes in sector header */
33:
34: u_short ubastd[] = { 0776700 };
35:
36: extern struct st upst[];
37:
38: struct dkbad upbad[MAXNUBA*8]; /* bad sector table */
39: int sectsiz; /* real sector size */
40:
41: struct up_softc {
42: char gottype;
43: char type;
44: char debug;
45: # define UPF_BSEDEBUG 01 /* debugging bad sector forwarding */
46: # define UPF_ECCDEBUG 02 /* debugging ecc correction */
47: int retries;
48: int ecclim;
49: } up_softc[MAXNUBA * 8];
50:
51: u_char up_offset[16] = {
52: UPOF_P400, UPOF_M400, UPOF_P400, UPOF_M400,
53: UPOF_P800, UPOF_M800, UPOF_P800, UPOF_M800,
54: UPOF_P1200, UPOF_M1200, UPOF_P1200, UPOF_M1200,
55: 0, 0, 0, 0
56: };
57:
58: upopen(io)
59: register struct iob *io;
60: {
61: register unit = io->i_unit;
62: register struct updevice *upaddr;
63: register struct up_softc *sc = &up_softc[unit];
64: register struct st *st;
65:
66: if (io->i_boff < 0 || io->i_boff > 7)
67: _stop("up bad unit");
68: upaddr = (struct updevice *)ubamem(unit, ubastd[0]);
69: upaddr->upcs2 = unit % 8;
70: while ((upaddr->upcs1 & UP_DVA) == 0)
71: ;
72: if (sc->gottype == 0) {
73: register int i;
74: struct iob tio;
75:
76: sc->retries = RETRIES;
77: sc->ecclim = 11;
78: sc->debug = 0;
79: sc->type = upmaptype(unit, upaddr);
80: if (sc->type < 0)
81: _stop("unknown drive type");
82: st = &upst[sc->type];
83: if (st->off[io->i_boff] == -1)
84: _stop("up bad unit");
85: /*
86: * Read in the bad sector table.
87: */
88: tio = *io;
89: tio.i_bn = st->nspc * st->ncyl - st->nsect;
90: tio.i_ma = (char *)&upbad[tio.i_unit];
91: tio.i_cc = sizeof (struct dkbad);
92: tio.i_flgs |= F_RDDATA;
93: for (i = 0; i < 5; i++) {
94: if (upstrategy(&tio, READ) == sizeof (struct dkbad))
95: break;
96: tio.i_bn += 2;
97: }
98: if (i == 5) {
99: printf("Unable to read bad sector table\n");
100: for (i = 0; i < MAXBADDESC; i++) {
101: upbad[unit].bt_bad[i].bt_cyl = -1;
102: upbad[unit].bt_bad[i].bt_trksec = -1;
103: }
104: }
105: sc->gottype = 1;
106: }
107: st = &upst[sc->type];
108: io->i_boff = st->off[io->i_boff] * st->nspc;
109: io->i_flgs &= ~F_TYPEMASK;
110: }
111:
112: upstrategy(io, func)
113: register struct iob *io;
114: {
115: int cn, tn, sn, o;
116: register unit = io->i_unit;
117: daddr_t bn;
118: int recal, info, waitdry;
119: register struct updevice *upaddr =
120: (struct updevice *)ubamem(unit, ubastd[0]);
121: struct up_softc *sc = &up_softc[unit];
122: register struct st *st = &upst[sc->type];
123: int doprintf = 0, error, rv = io->i_cc;
124:
125: sectsiz = SECTSIZ;
126: if (io->i_flgs & (F_HDR|F_HCHECK))
127: sectsiz += HDRSIZ;
128: upaddr->upcs2 = unit % 8;
129: if ((upaddr->upds & UPDS_VV) == 0) {
130: upaddr->upcs1 = UP_DCLR|UP_GO;
131: upaddr->upcs1 = UP_PRESET|UP_GO;
132: upaddr->upof = UPOF_FMT22;
133: }
134: if ((upaddr->upds & UPDS_DREADY) == 0) {
135: printf("up%d not ready", unit);
136: return (-1);
137: }
138: info = ubasetup(io, 1);
139: upaddr->upwc = -io->i_cc / sizeof (short);
140: recal = 0;
141: io->i_errcnt = 0;
142:
143: restart:
144: error = 0;
145: o = io->i_cc + (upaddr->upwc * sizeof (short));
146: upaddr->upba = info + o;
147: bn = io->i_bn + o / sectsiz;
148: if (doprintf && sc->debug & (UPF_ECCDEBUG|UPF_BSEDEBUG))
149: printf("wc=%d o=%d i_bn=%d bn=%d\n",
150: upaddr->upwc, o, io->i_bn, bn);
151: while((upaddr->upds & UPDS_DRY) == 0)
152: ;
153: if (upstart(io, bn) != 0) {
154: rv = -1;
155: goto done;
156: }
157: do {
158: DELAY(25);
159: } while ((upaddr->upcs1 & UP_RDY) == 0);
160: /*
161: * If transfer has completed, free UNIBUS
162: * resources and return transfer size.
163: */
164: if ((upaddr->upds&UPDS_ERR) == 0 && (upaddr->upcs1&UP_TRE) == 0)
165: goto done;
166: bn = io->i_bn +
167: (io->i_cc + upaddr->upwc * sizeof (short)) / sectsiz;
168: if (upaddr->uper1 & (UPER1_DCK|UPER1_ECH))
169: bn--;
170: cn = bn/st->nspc;
171: sn = bn%st->nspc;
172: tn = sn/st->nsect;
173: sn = sn%st->nsect;
174: if (sc->debug & (UPF_ECCDEBUG|UPF_BSEDEBUG)) {
175: printf("up error: sn%d (cyl,trk,sec)=(%d,%d,%d) ",
176: bn, cn, tn, sn);
177: printf("cs2=%b er1=%b er2=%b wc=%d\n",
178: upaddr->upcs2, UPCS2_BITS, upaddr->uper1,
179: UPER1_BITS, upaddr->uper2, UPER2_BITS, upaddr->upwc);
180: }
181: waitdry = 0;
182: while ((upaddr->upds&UPDS_DRY) == 0 && ++waitdry < sectsiz)
183: DELAY(5);
184: if (upaddr->uper1&UPER1_WLE) {
185: /*
186: * Give up on write locked devices immediately.
187: */
188: printf("up%d: write locked\n", unit);
189: rv = -1;
190: goto done;
191: }
192: if (upaddr->uper2 & UPER2_BSE) {
193: if ((io->i_flgs&F_NBSF) == 0 && upecc(io, BSE) == 0)
194: goto success;
195: error = EBSE;
196: goto hard;
197: }
198: /*
199: * ECC error. If a soft error, correct it;
200: * if correction is too large, no more retries.
201: */
202: if ((upaddr->uper1 & (UPER1_DCK|UPER1_ECH|UPER1_HCRC)) == UPER1_DCK) {
203: if (upecc(io, ECC) == 0)
204: goto success;
205: error = EECC;
206: goto hard;
207: }
208: /*
209: * If the error is a header CRC,
210: * check if a replacement sector exists in
211: * the bad sector table.
212: */
213: if ((upaddr->uper1&UPER1_HCRC) && (io->i_flgs&F_NBSF) == 0 &&
214: upecc(io, BSE) == 0)
215: goto success;
216: if (++io->i_errcnt > sc->retries) {
217: /*
218: * After 28 retries (16 without offset, and
219: * 12 with offset positioning) give up.
220: */
221: hard:
222: if (error == 0) {
223: error = EHER;
224: if (upaddr->upcs2 & UPCS2_WCE)
225: error = EWCK;
226: }
227: printf("up error: sn%d (cyl,trk,sec)=(%d,%d,%d) ",
228: bn, cn, tn, sn);
229: printf("cs2=%b er1=%b er2=%b\n",
230: upaddr->upcs2, UPCS2_BITS, upaddr->uper1,
231: UPER1_BITS, upaddr->uper2, UPER2_BITS);
232: upaddr->upcs1 = UP_TRE|UP_DCLR|UP_GO;
233: io->i_errblk = bn;
234: if (io->i_errcnt >= 16) {
235: upaddr->upof = UPOF_FMT22;
236: upaddr->upcs1 = UP_RTC|UP_GO;
237: while ((upaddr->upds&UPDS_DRY) == 0)
238: DELAY(25);
239: }
240: rv = -1;
241: goto done;
242: }
243: /*
244: * Clear drive error and, every eight attempts,
245: * (starting with the fourth)
246: * recalibrate to clear the slate.
247: */
248: upaddr->upcs1 = UP_TRE|UP_DCLR|UP_GO;
249: if ((io->i_errcnt&07) == 4 ) {
250: upaddr->upcs1 = UP_RECAL|UP_GO;
251: while ((upaddr->upds&UPDS_DRY) == 0)
252: DELAY(25);
253: upaddr->updc = cn;
254: upaddr->upcs1 = UP_SEEK|UP_GO;
255: while ((upaddr->upds&UPDS_DRY) == 0)
256: DELAY(25);
257: }
258: if (io->i_errcnt >= 16 && (func & READ)) {
259: upaddr->upof = up_offset[io->i_errcnt & 017] | UPOF_FMT22;
260: upaddr->upcs1 = UP_OFFSET|UP_GO;
261: while ((upaddr->upds&UPDS_DRY) == 0)
262: DELAY(25);
263: }
264: goto restart;
265:
266: success:
267: #define rounddown(x, y) (((x) / (y)) * (y))
268: upaddr->upwc = rounddown(upaddr->upwc, sectsiz / sizeof (short));
269: if (upaddr->upwc) {
270: doprintf++;
271: goto restart;
272: }
273: done:
274: /*
275: * Release UNIBUS
276: */
277: ubafree(io, info);
278: /*
279: * If we were offset positioning,
280: * return to centerline.
281: */
282: if (io->i_errcnt >= 16) {
283: upaddr->upof = UPOF_FMT22;
284: upaddr->upcs1 = UP_RTC|UP_GO;
285: while ((upaddr->upds&UPDS_DRY) == 0)
286: DELAY(25);
287: }
288: return (rv);
289: }
290:
291: /*
292: * Correct an ECC error, and restart the
293: * i/o to complete the transfer (if necessary).
294: * This is quite complicated because the transfer
295: * may be going to an odd memory address base and/or
296: * across a page boundary.
297: */
298: upecc(io, flag)
299: register struct iob *io;
300: int flag;
301: {
302: register i, unit = io->i_unit;
303: register struct up_softc *sc = &up_softc[unit];
304: register struct updevice *up =
305: (struct updevice *)ubamem(unit, ubastd[0]);
306: register struct st *st;
307: caddr_t addr;
308: int bn, twc, npf, mask, cn, tn, sn;
309: daddr_t bbn;
310:
311: /*
312: * Npf is the number of sectors transferred
313: * before the sector containing the ECC error;
314: * bn is the current block number.
315: */
316: twc = up->upwc;
317: npf = ((twc * sizeof(short)) + io->i_cc) / sectsiz;
318: if (flag == ECC)
319: npf--;
320: if (sc->debug & UPF_ECCDEBUG)
321: printf("npf=%d mask=0x%x ec1=%d wc=%d\n",
322: npf, up->upec2, up->upec1, twc);
323: bn = io->i_bn + npf;
324: st = &upst[sc->type];
325: cn = bn/st->nspc;
326: sn = bn%st->nspc;
327: tn = sn/st->nsect;
328: sn = sn%st->nsect;
329:
330: /*
331: * ECC correction.
332: */
333: if (flag == ECC) {
334: int bit, o;
335:
336: mask = up->upec2;
337: printf("up%d: soft ecc sn%d\n", unit, bn);
338: for (i = mask, bit = 0; i; i >>= 1)
339: if (i & 1)
340: bit++;
341: if (bit > sc->ecclim) {
342: printf("%d-bit error\n", bit);
343: return (1);
344: }
345: /*
346: * Compute the byte and bit position of
347: * the error. o is the byte offset in
348: * the transfer at which the correction
349: * applied.
350: */
351: i = up->upec1 - 1; /* -1 makes 0 origin */
352: bit = i & 07;
353: o = (i & ~07) >> 3;
354: up->upcs1 = UP_TRE|UP_DCLR|UP_GO;
355: /*
356: * Correct while possible bits remain of mask.
357: * Since mask contains 11 bits, we continue while
358: * the bit offset is > -11. Also watch out for
359: * end of this block and the end of the transfer.
360: */
361: while (o < sectsiz && (npf*sectsiz)+o < io->i_cc && bit > -11) {
362: /*
363: * addr =
364: * (base address of transfer) +
365: * (# sectors transferred before the error) *
366: * (sector size) +
367: * (byte offset to incorrect data)
368: */
369: addr = io->i_ma + (npf * sectsiz) + o;
370: /*
371: * No data transfer occurs with a write check,
372: * so don't correct the resident copy of data.
373: */
374: if ((io->i_flgs & (F_CHECK|F_HCHECK)) == 0) {
375: if (sc->debug & UPF_ECCDEBUG)
376: printf("addr=0x%x old=0x%x ", addr,
377: (*addr&0xff));
378: *addr ^= (mask << bit);
379: if (sc->debug & UPF_ECCDEBUG)
380: printf("new=0x%x\n", (*addr&0xff));
381: }
382: o++, bit -= 8;
383: }
384: return (0);
385: }
386:
387: /*
388: * Bad sector forwarding.
389: */
390: if (flag == BSE) {
391: /*
392: * If not in bad sector table,
393: * indicate a hard error to caller.
394: */
395: up->upcs1 = UP_TRE|UP_DCLR|UP_GO;
396: if ((bbn = isbad(&upbad[unit], cn, tn, sn)) < 0)
397: return (1);
398: bbn = (st->ncyl * st->nspc) - st->nsect - 1 - bbn;
399: twc = up->upwc + sectsiz;
400: up->upwc = - (sectsiz / sizeof (short));
401: if (sc->debug & UPF_BSEDEBUG)
402: printf("revector sn %d to %d\n", sn, bbn);
403: /*
404: * Clear the drive & read the replacement
405: * sector. If this is in the middle of a
406: * transfer, then set up the controller
407: * registers in a normal fashion.
408: * The UNIBUS address need not be changed.
409: */
410: while ((up->upcs1 & UP_RDY) == 0)
411: ;
412: if (upstart(io, bbn))
413: return (1); /* error */
414: io->i_errcnt = 0; /* success */
415: do {
416: DELAY(25);
417: } while ((up->upcs1 & UP_RDY) == 0) ;
418: if ((up->upds & UPDS_ERR) || (up->upcs1 & UP_TRE)) {
419: up->upwc = twc - sectsiz;
420: return (1);
421: }
422: }
423: if (twc)
424: up->upwc = twc;
425: return (0);
426: }
427:
428: upstart(io, bn)
429: register struct iob *io;
430: daddr_t bn;
431: {
432: register struct updevice *upaddr =
433: (struct updevice *)ubamem(io->i_unit, ubastd[0]);
434: register struct up_softc *sc = &up_softc[io->i_unit];
435: register struct st *st = &upst[sc->type];
436: int sn, tn;
437:
438: sn = bn%st->nspc;
439: tn = sn/st->nsect;
440: sn %= st->nsect;
441: upaddr->updc = bn/st->nspc;
442: upaddr->upda = (tn << 8) + sn;
443: switch (io->i_flgs & F_TYPEMASK) {
444:
445: case F_RDDATA:
446: upaddr->upcs1 = UP_RCOM|UP_GO;
447: break;
448:
449: case F_WRDATA:
450: upaddr->upcs1 = UP_WCOM|UP_GO;
451: break;
452:
453: case F_HDR|F_RDDATA:
454: upaddr->upcs1 = UP_RHDR|UP_GO;
455: break;
456:
457: case F_HDR|F_WRDATA:
458: upaddr->upcs1 = UP_WHDR|UP_GO;
459: break;
460:
461: case F_CHECK|F_WRDATA:
462: case F_CHECK|F_RDDATA:
463: upaddr->upcs1 = UP_WCDATA|UP_GO;
464: break;
465:
466: case F_HCHECK|F_WRDATA:
467: case F_HCHECK|F_RDDATA:
468: upaddr->upcs1 = UP_WCHDR|UP_GO;
469: break;
470:
471: default:
472: io->i_error = ECMD;
473: io->i_flgs &= ~F_TYPEMASK;
474: return (1);
475: }
476: return (0);
477: }
478:
479: /*ARGSUSED*/
480: upioctl(io, cmd, arg)
481: struct iob *io;
482: int cmd;
483: caddr_t arg;
484: {
485: int unit = io->i_unit;
486: register struct up_softc *sc = &up_softc[unit];
487: struct st *st = &upst[sc->type];
488:
489: switch(cmd) {
490:
491: case SAIODEBUG:
492: sc->debug = (int)arg;
493: break;
494:
495: case SAIODEVDATA:
496: *(struct st *)arg = *st;
497: break;
498:
499: case SAIOGBADINFO:
500: *(struct dkbad *)arg = upbad[unit];
501: break;
502:
503: case SAIOECCLIM:
504: sc->ecclim = (int)arg;
505: break;
506:
507: case SAIORETRIES:
508: sc->retries = (int)arg;
509: break;
510:
511: default:
512: return (ECMD);
513: }
514: return (0);
515: }
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.