Return to Make.uobj CVS log

Up to [CSRG BSD Unix] / 43BSD / ucb / lisp / franz / vax

Annotation of 43BSD/ucb/lisp/franz/vax/Make.uobj, revision 1.1

1.1     ! root        1: #
        !             2: # 
        !             3: # $Header: /na/franz/franz/vax/RCS/Makefile,v 1.3 83/03/23 22:33:01 jkf Exp $
        !             4: #
        !             5: #  Franz Lisp C coded kernel 
        !             6: #
        !             7: #-- Default Paths:
        !             8: #  see ../../ReadMe for a explaination of what LibDir and CopyTo mean
        !             9: #  D is the directory used for holding intermediate files during 
        !            10: #    compilation
        !            11: #-- Options:
        !            12: #  there is one compile time options which can be set in this file
        !            13: #  * do profiling (ala the unix prof(1) command)
        !            14: #
        !            15: #  The selection of this options is made below
        !            16: #  Other options can be selected by editing h/config.h or via
        !            17: #  ../../lispconf
        !            18: #
        !            19: AS = unixas    # Generate VMS object files
        !            20: LD = unixld    # Generate VMS object files
        !            21: CFLAGS = -DEUNICE_UNIX_OBJECT_FILE_CFASL       # enable UNIX object CFASL
        !            22: 
        !            23: LibDir = /usr/lib/lisp
        !            24: ObjDir = /usr/ucb
        !            25: CopyTo = /dev/null
        !            26: Liszt = liszt
        !            27: Lisp = lisp
        !            28: # if you change this you must recompile rlc.c 
        !            29: # (and change the value in ../Makefile)
        !            30: #
        !            31: HOLE=2097152
        !            32: 
        !            33: .DEFAULT: nlisp
        !            34: 
        !            35: MipSrc1= ../low.c
        !            36: MipSrc2= ../alloc.c ../data.c
        !            37: MipSrc3=
        !            38: MipSrc4= ../lisp.c ../eval.c ../eval2.c ../inits.c ../io.c ../error.c \
        !            39:         ../sysat.c ../lam1.c ../lam2.c ../lam3.c ../lam4.c ../lam5.c\
        !            40:         ../lam6.c  ../lam7.c ../lam8.c ../lam9.c ../lamr.c ../lamp.c \
        !            41:         ../fex1.c ../fex2.c ../fex3.c ../fex4.c ../fexr.c\
        !            42:         ../fpipe.c \
        !            43:         ../subbig.c ../pbignum.c ../divbig.c \
        !            44:         ../ffasl.c ../fasl.c \
        !            45:         ../trace.c ../evalf.c ../frame.c ../lamgc.c
        !            46: 
        !            47: MipSrc = ${MipSrc1} ${MipSrc2} ${MipSrc3} ${MipSrc4}
        !            48: 
        !            49: MipObj1= ../low.o
        !            50: MipObj2= ../alloc.o ../data.o
        !            51: HoleMipObj2 = ../Salloc.o ../Sdata.o
        !            52: HoleMipObj3 =
        !            53: MipObj4= ../lisp.o ../eval.o ../eval2.o ../inits.o ../io.o ../error.o \
        !            54:         ../sysat.o ../lam1.o ../lam2.o ../lam3.o ../lam4.o ../lam5.o\
        !            55:         ../lam6.o  ../lam7.o ../lam8.o ../lam9.o ../lamr.o ../lamp.o \
        !            56:         ../fex1.o ../fex2.o ../fex3.o ../fex4.o ../fexr.o\
        !            57:         ../fpipe.o \
        !            58:         ../subbig.o ../pbignum.o ../divbig.o \
        !            59:         ../ffasl.o ../fasl.o \
        !            60:         ../trace.o ../evalf.o ../frame.o ../lamgc.o
        !            61: 
        !            62: # this list must contain all the include files, not just those used
        !            63: # in the vax version.  The include filenames are relative to ..
        !            64: #
        !            65: Includes = h/config.h  h/global.h      h/oaout.h       h/vaxframe.h \
        !            66:        h/catchfram.h   h/dfuncs.h      h/gtabs.h       h/sigtab.h \
        !            67:        h/chars.h       h/frame.h       h/lfuncs.h      h/structs.h \
        !            68:        h/chkrtab.h     h/gc.h          h/naout.h       h/types.h \
        !            69:        h/lconf.h       h/ltypes.h
        !            70: 
        !            71: #------ Options
        !            72: 
        !            73: #--- profiling selection
        !            74: # If the lisp system is to run with profiling, this must be done:
        !            75: #  1) remove the # (comment character) from the ProfFlag and
        !            76: #     ProfFlag2 definitions below (also do it in ../Makefile)
        !            77: #  2) remove all .o files and do a make.
        !            78: #
        !            79: ProfFlag = # -XP
        !            80: ProfFlag2 = # -DPROF
        !            81: 
        !            82: 
        !            83: # The order of loading of certain files is important.
        !            84: # low.o must be first and lowaux second.
        !            85: # 
        !            86: BottomObj = ${MipObj1} ../lowaux.o
        !            87: HBottomObj = ${MipObj1} hlowaux.o
        !            88: 
        !            89: # Different objects are required depending on whether there is to be
        !            90: # a hole between text and data space.
        !            91: #
        !            92: NoHoleObj = ${MipObj2}
        !            93: HoleObj   = ${HoleMipObj2} ${HoleMipObj3}
        !            94: 
        !            95: VaxObj = bigmath.o qfuncl.o vax.o prealloc.o
        !            96: 
        !            97: VaxSrc = bigmath.c qfuncl.c vax.c crt0.s hcrt0.s lowaux.s
        !            98: 
        !            99: # AllSrc does not (and should not) include ${Includes}
        !           100: 
        !           101: AllSrc = Makefile  fixmask.c fixpbig.e ${VaxSrc} ${MipSrc}
        !           102: 
        !           103: 
        !           104: .SUFFIXES : .c.l
        !           105: #
        !           106: # use temporary files rather than pipes to keep the number of procs. down
        !           107: # thus, users with low process quotas on VMS can still build lisp
        !           108: #
        !           109: .c.o :
        !           110:        @csh -cfe "echo cc -c  $*.c;\
        !           111:        rm -f $*.o;\
        !           112:        /lib/cpp ${CFLAGS} $< -I../h > $*.tm0;\
        !           113:        /lib/ccom ${ProfFlag} $*.tm0 $*.tm1;\
        !           114:        fixmask <$*.tm1 >$*.tm2;\
        !           115:        sed -f fixpbig.e <$*.tm2 >$*.tm3;\
        !           116:        /lib/c2 $*.tm3 >$*.tms;\
        !           117:        ${AS} -o $*.o $*.tms;\
        !           118:        rm $*.tms $*.tm0 $*.tm1 $*.tm2 $*.tm3"
        !           119: 
        !           120: .l.o :
        !           121:        liszt $< > #resc
        !           122:        @echo liszt $< done
        !           123: 
        !           124: # one special case:
        !           125: #  add -DPROF if you want to profile the assembler code
        !           126: 
        !           127: # EXPLICITLY USE "unixcpp" SO THAT "$"s IN ASSEMBLER CODE WORK!
        !           128: qfuncl.o: qfuncl.c
        !           129:        /lib/unixcpp -I../h ${ProfFlag2} qfuncl.c | ${AS} -o qfuncl.o
        !           130: 
        !           131: bigmath.o: bigmath.c
        !           132:        /lib/unixcpp -I../h ${ProfFlag2} bigmath.c | ${AS} -o bigmath.o
        !           133: 
        !           134: ../rlc.o: ../rlc.c 
        !           135:        cc -S -O ${CFLAGS} -DHOLE=${HOLE} ../rlc.c
        !           136:        ${AS} -o rlc.o rlc.s
        !           137:        rm rlc.s
        !           138:        mv rlc.o ../rlc.o
        !           139: 
        !           140: ../low.o: ../low.c
        !           141:        cc ${CFLAGS} -I../h -R -S ../low.c
        !           142:        ${AS} -R -o low.o low.s
        !           143:        rm low.s
        !           144:        mv low.o ../low.o
        !           145: 
        !           146: ../Salloc.o: ../alloc.c
        !           147:        (echo "# define HOLE ${HOLE}"; cat ../alloc.c) > Salloc.c;\
        !           148:        make Salloc.o; mv Salloc.o .. < /dev/null ; rm Salloc.c
        !           149:        
        !           150: ../Sdata.o: ../data.c
        !           151:        (echo "# define HOLE ${HOLE}"; cat ../data.c) > Sdata.c;\
        !           152:        make Sdata.o; mv Sdata.o .. < /dev/null  ; rm Sdata.c
        !           153: 
        !           154: fixmask: fixmask.c
        !           155:        cc -O -o fixmask fixmask.c
        !           156: 
        !           157: # rawlisp is the standard raw lisp system.
        !           158: 
        !           159: rawlisp: fixmask fixpbig.e \
        !           160:                ${BottomObj} ${NoHoleObj} ${MipObj4} ${VaxObj} 
        !           161:        rm -f rawlisp
        !           162:        ld -noshare -nop0bufs -x -o rawlisp ${BottomObj} /lib/crt0.o \
        !           163:                                ${NoHoleObj} ${VaxObj} ${MipObj4} \
        !           164:                                /lib/fastexecp.o  -lm -lc -ltermlib
        !           165:        ls -l rawlisp
        !           166: 
        !           167: 
        !           168: # hlisp is a raw lisp system with a hole between text and data
        !           169: 
        !           170: rawhlisp: fixmask fixpbig.e ${HBottomObj} ${HoleObj} ${MipObj4} ${VaxObj} 
        !           171:        rm -f rawhlisp
        !           172:        ld -noshare -nop0bufs -x -o rawhlisp ${HBottomObj} \
        !           173:                                /lib/crt0.o ${HoleObj} \
        !           174:                                ${VaxObj}  ${MipObj4} \
        !           175:                                /lib/fastexecp.o -lm -lc -ltermlib
        !           176:        ls -l rawhlisp
        !           177: 
        !           178: hlowaux.o: ../lowaux.s
        !           179:        sed "s/holbeg:/holbeg: .space ${HOLE}/" <../lowaux.s >hlowaux.s
        !           180:        ${AS} -o hlowaux.o hlowaux.s
        !           181:        rm -f hlowaux.s
        !           182: 
        !           183: 
        !           184: clean:
        !           185:        rm -f *.o
        !           186: 
        !           187: lint:
        !           188:        lint h/*.h *.c
        !           189: 
        !           190: install: nlisp 
        !           191:        -rm -f ${ObjDir}/lisp
        !           192:        mv nlisp ${ObjDir}/lisp
        !           193:        @echo lisp installed
        !           194: 
        !           195: nlisp: rawlisp ${LibDir}
        !           196:        -rm -f nlisp
        !           197:        (cd ${LibDir} ; make Liszt=${Liszt} required)
        !           198:        echo "(progn (setq build:map 'map \
        !           199:                           build:lisp-type 'franz \
        !           200:                           lisp-library-directory '${LibDir} \
        !           201:                           build:dir '${LibDir} \
        !           202:                           lisp-object-directory '${ObjDir}) \
        !           203:                     (load '${LibDir}/buildlisp)\
        !           204:                     (dumplisp nlisp))" | rawlisp
        !           205:        ${LibDir}/tackon map nlisp
        !           206:        @echo nlisp built
        !           207: 
        !           208: 
        !           209: donlisp:
        !           210:        -rm -f nlisp
        !           211:        make LibDir=${LibDir} Liszt=${Liszt} ObjDir=${ObjDir} nlisp
        !           212: 
        !           213: #--- snlisp: create a totally interpreted lisp.
        !           214: #      dump as snlisp
        !           215: snlisp: rawlisp
        !           216:        echo "(progn (setq build:load t         \
        !           217:                           build:lisp-type 'franz \
        !           218:                           build:dir '${LibDir} \
        !           219:                           lisp-object-directory '${ObjDir}\
        !           220:                           lisp-library-directory '${LibDir})\
        !           221:                     (load '${LibDir}/buildlisp)\
        !           222:                     (dumplisp snlisp))" | rawlisp
        !           223: 
        !           224: 
        !           225: tags:  
        !           226:        ctags $(VaxSrc) ${MipSrc}
        !           227: 
        !           228: #--- copysource : copy source files to another directory
        !           229: #  called via   make CopyTo=/xx/yyy/zz copysource
        !           230: # 
        !           231: copysource: ${AllSrc}
        !           232:        (tar cf - ${AllSrc} | (cd ${CopyTo} ; tar xf -))
        !           233: 
        !           234: copyobjects: ${AllObj}
        !           235:        (tar cf - ${AllObj} | (cd ${CopyTo} ; tar xf -))
        !           236: 
        !           237: scriptcatall: ${AllSrc}
        !           238:        @../../scriptcat . franz/vax ${AllSrc}
        !           239:        @../../scriptcat .. franz ${Includes}
        !           240: 
        !           241:        
        !           242: #--- prealloc.o: the "C" runtime startup for EUNICE with data structure
        !           243: #      preallocation and restart capabilities
        !           244: #              NFILES  - # file descriptors of data structure to allocate
        !           245: #              RESTART - allow restart from saved image
        !           246: #
        !           247: prealloc.o:    Makefile
        !           248:        /lib/cpp -DNFILES=20 -DRESTART /usr/include/eunice/prealloc.c prealloc.tm0
        !           249:        /lib/ccom prealloc.tm0 prealloc.tm1
        !           250:        /lib/c2 prealloc.tm1 prealloc.tm2
        !           251:        sed -f /usr/include/eunice/sedfixup.e <prealloc.tm2 >prealloc.tm3
        !           252:        ${AS} -o prealloc.o prealloc.tm3
        !           253:        rm prealloc.tm0 prealloc.tm1 prealloc.tm2 prealloc.tm3
        !           254: 
        !           255: totxtfile: totxtfile.c 
        !           256:        cc -O totxtfile.c -o totxtfile

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.