|
|
1.1 root 1: .\" Copyright (c) 1986 The Regents of the University of California.
2: .\" All rights reserved.
3: .\"
4: .\" Redistribution and use in source and binary forms are permitted provided
5: .\" that: (1) source distributions retain this entire copyright notice and
6: .\" comment, and (2) distributions including binaries display the following
7: .\" acknowledgement: ``This product includes software developed by the
8: .\" University of California, Berkeley and its contributors'' in the
9: .\" documentation or other materials provided with the distribution and in
10: .\" all advertising materials mentioning features or use of this software.
11: .\" Neither the name of the University nor the names of its contributors may
12: .\" be used to endorse or promote products derived from this software without
13: .\" specific prior written permission.
14: .\" THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
15: .\" WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
16: .\" MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
17: .\"
18: .\" @(#)enp.4 5.3 (Berkeley) 6/23/90
19: .\"
20: .TH ENP 4 "June 23, 1990"
21: .UC 5
22: .SH NAME
23: enp \- CMC 10 Mb/s Ethernet interface
24: .SH SYNOPSIS
25: .B "device enp0 at vba? csr 0xfff40000 vector enpintr"
26: .SH DESCRIPTION
27: The
28: .I enp
29: interface provides access to a 10 Mb/s Ethernet network through
30: a CMC ENP-20 controller.
31: .PP
32: The hardware has 128 kilobytes of dual-ported memory on the VERSAbus.
33: This memory
34: is used for internal buffering by the board, and the interface code reads
35: the buffer contents directly through the VERSAbus.
36: The address of this memory is derived from the address specified
37: in the configuration file.
38: .PP
39: Each of the host's network addresses
40: is specified at boot time with an SIOCSIFADDR
41: ioctl. The
42: .I ace
43: interface employs the address resolution protocol described in
44: .IR arp (4)
45: to dynamically map between Internet and Ethernet addresses on the local
46: network.
47: .PP
48: The interface normally tries to use a ``trailer'' encapsulation
49: to minimize copying data on input and output.
50: The use of trailers is negotiated with ARP.
51: This negotiation may be disabled, on a per-interface basis,
52: by setting the IFF_NOTRAILERS
53: flag with an SIOCSIFFLAGS ioctl.
54: .PP
55: Associated with each interface is a character device which
56: is used to dowload, start, and reset the firmware in the controller.
57: Reading or writing the ``ram device'' reads or writes the writable
58: control store in the controller. Two
59: .IR ioctl (2)
60: calls, ENPIOGO and ENPIORESET, are used to start and reset the
61: firmware.
62: .SH DIAGNOSTICS
63: .BR "enp%d: can't handle af%d" .
64: The interface was handed
65: a message with addresses formatted in an unsuitable address
66: family; the packet was dropped.
67: .SH SEE ALSO
68: intro(4), inet(4), arp(4), enpload(8)
69: .SH BUGS
70: The hardware is not capable of talking to itself. The software
71: implements local sending and broadcast by sending such packets to the
72: loop interface. This is a kludge.
73: .PP
74: The link level firmware does not support setting the board's
75: Ethernet address.
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.