|
|
Initial revision
.\" Copyright (c) 1980 Regents of the University of California. .\" All rights reserved. The Berkeley software License Agreement .\" specifies the terms and conditions for redistribution. .\" .\" @(#)cons.4 6.2 (Berkeley) 5/19/86 .\" .TH CONS 4 "May 19, 1986" .UC 4 .SH NAME cons \- VAX-11 console interface .SH DESCRIPTION The console is available to the processor through the console registers. It acts like a normal terminal, except that when the local functions are not disabled, control-P puts the console in local console mode (where the prompt is ``>>>''). The operation of the console in this mode varies slightly per-processor. .PP On an 11/780 or 785 the processor is not stopped by entering local console mode. The CPU may be halted with the ``halt'' command, which may be abbreviated to ``h.'' Conversational mode is re-entered by using the command ``set t p'' (set terminal program) if the processor is still running, or ``continue'' if it is halted. The latter command may be abbreviated ``c''. If you hit the break key on the console, then the console LSI-11 will go into ODT (console debugger mode). Hit a ``P'' (upper-case letter p; ``proceed'') to get out of this mode. .PP On an 11/750 or an 11/730 the processor is halted whenever the console is not in conversational mode, and typing ``C'' returns to conversational mode. When in console mode on an 11/750 which has a remote diagnosis module, a ^D will put you in remote diagnosis mode, where the prompt will be ``RDM>''. The command ``ret'' will return from remote diagnosis mode to local console mode. .PP The VAX 8600 (8650) console normally works in the same way as the 11/750, except that there are many additional modes and commands. In the normal mode control-P halts the processor, and ``c'' or ``continue'' returns to conversational mode. If HEX debug is enabled, control-P does not halt the CPU; the ``halt'' command stops the CPU as on the 11/780. .PP With the above proviso's the console works like any other UNIX terminal. .SH FILES /dev/console .SH "SEE ALSO" tty(4), reboot(8) .br VAX Hardware Handbook
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.