|
|
1.1 ! root 1: .\" Copyright (c) 1986 The Regents of the University of California. ! 2: .\" All rights reserved. ! 3: .\" ! 4: .\" Redistribution and use in source and binary forms are permitted provided ! 5: .\" that: (1) source distributions retain this entire copyright notice and ! 6: .\" comment, and (2) distributions including binaries display the following ! 7: .\" acknowledgement: ``This product includes software developed by the ! 8: .\" University of California, Berkeley and its contributors'' in the ! 9: .\" documentation or other materials provided with the distribution and in ! 10: .\" all advertising materials mentioning features or use of this software. ! 11: .\" Neither the name of the University nor the names of its contributors may ! 12: .\" be used to endorse or promote products derived from this software without ! 13: .\" specific prior written permission. ! 14: .\" THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED ! 15: .\" WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF ! 16: .\" MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ! 17: .\" ! 18: .\" @(#)de.4 6.4 (Berkeley) 6/23/90 ! 19: .\" ! 20: .TH DE 4 "June 23, 1990" ! 21: .UC 5 ! 22: .SH NAME ! 23: de \- DEC DEUNA 10 Mb/s Ethernet interface ! 24: .SH SYNOPSIS ! 25: .B "device de0 at uba0 csr 174510 vector deintr" ! 26: .SH DESCRIPTION ! 27: The ! 28: .I de ! 29: interface provides access to a 10 Mb/s Ethernet network through ! 30: a Digital Equipment UNIBUS Network Adapter (DEUNA). ! 31: .PP ! 32: Each of the host's network addresses ! 33: is specified at boot time with an SIOCSIFADDR ! 34: ioctl. The ! 35: .I de ! 36: interface employs the address resolution protocol described in ! 37: .IR arp (4) ! 38: to dynamically map between Internet and Ethernet addresses on the local ! 39: network. ! 40: .PP ! 41: The interface normally tries to use a ``trailer'' encapsulation ! 42: to minimize copying data on input and output. ! 43: The use of trailers is negotiated with ARP. ! 44: This negotiation may be disabled, on a per-interface basis, ! 45: by setting the IFF_NOTRAILERS ! 46: flag with an SIOCSIFFLAGS ioctl. ! 47: .SH DIAGNOSTICS ! 48: \fBde%d: hardware address %s\fP. ! 49: This is a normal autoconfiguration message noting the 6 byte physical ! 50: ethernet address of the adapter. ! 51: .PP ! 52: \fBde%d: oerror, flags=%b tdrerr=%b (len=%d)\fP. ! 53: The hardware indicated an error ! 54: in transmitting a packet to the cable. ! 55: The status and error flags are reported. ! 56: .PP ! 57: \fBde%d: ierror, flags=%b lenerr=%b (len=%d)\fP. ! 58: The hardware indicated an error ! 59: in reading a packet from the cable. ! 60: The status and error flags are reported. ! 61: .PP ! 62: \fBde%d: can't handle af%d\fP. The interface was handed ! 63: a message with addresses formatted in an unsuitable address ! 64: family; the packet was dropped. ! 65: .PP ! 66: \fBde%d: buffer unavailable\fP. The interface received more packets ! 67: than it had buffers allocated to receive them. ! 68: .PP ! 69: \fBde%d: address change failed, csr0=%b csr1=%b\fP. ! 70: The interface was unable to reprogram ! 71: its physical ethernet address. ! 72: This may happen with very early models of the interface. ! 73: This facility is used only when ! 74: the controller is not the first network interface configured for XNS. ! 75: .PP ! 76: The following messages indicate a probable hardware error performing ! 77: the indicated operation during autoconfiguration or initialization. ! 78: The two control and status registers ! 79: should indicate the nature of the failure. ! 80: See the hardware manual for details. ! 81: .PP ! 82: \fBde%d: reset failed, csr0=%b csr1=%b\fP. ! 83: .PP ! 84: \fBde%d: ppcb failed, csr0=%b csr1=%b\fP. ! 85: .PP ! 86: \fBde%d: read addr failed, csr0=%b csr1=%b\fP. ! 87: .PP ! 88: \fBde%d: wtring failed, csr0=%b csr1=%b\fP. ! 89: .PP ! 90: \fBde%d: wtmode failed, csr0=%b csr1=%b\fP. ! 91: .SH SEE ALSO ! 92: netintro(4), inet(4), arp(4)
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.