|
|
1.1 ! root 1: .\" Copyright (c) 1986 The Regents of the University of California. ! 2: .\" All rights reserved. ! 3: .\" ! 4: .\" Redistribution and use in source and binary forms are permitted provided ! 5: .\" that: (1) source distributions retain this entire copyright notice and ! 6: .\" comment, and (2) distributions including binaries display the following ! 7: .\" acknowledgement: ``This product includes software developed by the ! 8: .\" University of California, Berkeley and its contributors'' in the ! 9: .\" documentation or other materials provided with the distribution and in ! 10: .\" all advertising materials mentioning features or use of this software. ! 11: .\" Neither the name of the University nor the names of its contributors may ! 12: .\" be used to endorse or promote products derived from this software without ! 13: .\" specific prior written permission. ! 14: .\" THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED ! 15: .\" WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF ! 16: .\" MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ! 17: .\" ! 18: .\" @(#)ex.4 6.5 (Berkeley) 6/23/90 ! 19: .\" ! 20: .TH EX 4 "June 23, 1990" ! 21: .UC 5 ! 22: .SH NAME ! 23: ex \- Excelan 10 Mb/s Ethernet interface ! 24: .SH SYNOPSIS ! 25: .B "device ex0 at uba0 csr 164000 vector excdint" ! 26: .SH DESCRIPTION ! 27: The ! 28: .I ex ! 29: interface provides access to a 10 Mb/s Ethernet network through ! 30: an Excelan controller used as a link-layer interface. ! 31: .PP ! 32: Each of the host's network addresses ! 33: is specified at boot time with an SIOCSIFADDR ! 34: ioctl. The ! 35: .I ex ! 36: interface employs the address resolution protocol described in ! 37: .IR arp (4) ! 38: to dynamically map between Internet and Ethernet addresses on the local ! 39: network. ! 40: .PP ! 41: The interface normally tries to use a ``trailer'' encapsulation ! 42: to minimize copying data on input and output. ! 43: The use of trailers is negotiated with ARP. ! 44: This negotiation may be disabled, on a per-interface basis, ! 45: by setting the IFF_NOTRAILERS ! 46: flag with an SIOCSIFFLAGS ioctl. ! 47: .SH DIAGNOSTICS ! 48: \fBex%d: HW %c.%c, NX %c.%c, hardware address %s\fP. ! 49: This provides firmware revisions levels, and is expected during ! 50: autoconfiguration. ! 51: .PP ! 52: \fBex%d: can't initialize\fP. ! 53: There was a failure in allocating unibus resources for the device. ! 54: .PP ! 55: \fBex%d: configuration failed; cc = %x\fP. ! 56: The hardware indicated an error when trying to initalize itself. ! 57: The error code returned is described at length in the device ! 58: Reference Manual. ! 59: .PP ! 60: \fBex%d: receive error %b\fP. The hardware indicated an error ! 61: in reading a packet from the cable. ! 62: Specific Error bits are provided ! 63: .PP ! 64: \fBex%d: transmit error %b\fP. The hardware indicated an error ! 65: in transmitting a packet to the cable or an illegally sized packet. ! 66: Specific Error bits are provided ! 67: .PP ! 68: \fBex%d: can't handle af%d\fP. The interface was handed ! 69: a message with addresses formatted in an unsuitable address ! 70: family; the packet was dropped. ! 71: .SH SEE ALSO ! 72: netintro(4), inet(4), arp(4)
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.