|
|
1.1 root 1: .\" Copyright (c) 1986 The Regents of the University of California.
2: .\" All rights reserved.
3: .\"
4: .\" Redistribution and use in source and binary forms are permitted provided
5: .\" that: (1) source distributions retain this entire copyright notice and
6: .\" comment, and (2) distributions including binaries display the following
7: .\" acknowledgement: ``This product includes software developed by the
8: .\" University of California, Berkeley and its contributors'' in the
9: .\" documentation or other materials provided with the distribution and in
10: .\" all advertising materials mentioning features or use of this software.
11: .\" Neither the name of the University nor the names of its contributors may
12: .\" be used to endorse or promote products derived from this software without
13: .\" specific prior written permission.
14: .\" THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
15: .\" WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
16: .\" MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
17: .\"
18: .\" @(#)ix.4 6.4 (Berkeley) 6/23/90
19: .\"
20: .TH IX 4 "June 23, 1990"
21: .UC 5
22: .SH NAME
23: ix \- Interlan Np100 10 Mb/s Ethernet interface
24: .SH SYNOPSIS
25: .B "device np0 at uba0 csr 166000 vector npintr"
26: .SH DESCRIPTION
27: The
28: .I ix
29: interface provides access to a 10 Mb/s Ethernet network through
30: an Interlan Np100 controller used as a link-layer interface.
31: .PP
32: This interface is unusual in that it requires loading firmware
33: into the controller before it may be used as a network interface.
34: This is accomplished by opening a character special device,
35: and writing data to it.
36: A program to load the image is provided in /usr/src/new/np100.
37: The sequence of commands would be:
38: .nf
39:
40: # ./npload np.image [/dev/np<board #> if other than np00]
41: # sleep 10
42: # ifconfig ix0 ...
43: .fi
44: .PP
45: Each of the host's network addresses
46: is specified at boot time with an SIOCSIFADDR
47: ioctl. The
48: .I ix
49: interface employs the address resolution protocol described in
50: .IR arp (4)
51: to dynamically map between Internet and Ethernet addresses on the local
52: network.
53: .PP
54: The interface normally tries to use a ``trailer'' encapsulation
55: to minimize copying data on input and output.
56: The use of trailers is negotiated with ARP.
57: This negotiation may be disabled, on a per-interface basis,
58: by setting the IFF_NOTRAILERS
59: flag with an SIOCSIFFLAGS ioctl.
60: .SH DIAGNOSTICS
61: \fBix%d: Req failed, cmd %x, stat %x, ust error %x,%x\fP.
62: The firmware in the controller refused to honor a request from
63: .UX
64: in initializing packet level communications.
65: The board may need to be reset and reloaded.
66: Or, you may not have allowed enough time between loading the board
67: and issuing the request to begin unix network operation.
68: .PP
69: \fBix%d: can't initialize\fP.
70: The interface was unable to obtain unibus resources required for operation.
71: .PP
72: \fBix%d: failed to reinitialize DLA module\fP.
73: The interface got sick after attempting to reprogram its physical
74: ethernet address. Try reloading the firmware.
75: The attempt is made only when this interfaces is not the first
76: one configured for XNS.
77: .PP
78: \fBix%d: can't handle af%d\fP. The interface was handed
79: a message with addresses formatted in an unsuitable address
80: family; the packet was dropped.
81: .PP
82: \fBix%d: stray xmit interrupt, npreq=%x\fP.
83: This may happen if the board is reloaded while network processes are still
84: running.
85: .PP
86: \fBixrint: cqe error %x, %x, %x\fP.
87: This will result if an
88: .IR ifconfig (8c)
89: request is made at an inopportune time, such as not allowing
90: enough time after loading the firmware.
91: After 100 such errors are logged, the unix network driver will
92: shut itself down, saying:
93: .PP
94: \fBixrint: shutting down unix dla\fP.
95: The recourse is to reload the firmware and allow more time.
96: .SH SEE ALSO
97: netintro(4), inet(4), arp(4), np(4).
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.