Return to ts.4 CVS log

Up to [CSRG BSD Unix] / 43BSDReno / share / man / man4 / man4.vax

BSD 4.3reno

.\" Copyright (c) 1980 Regents of the University of California.
.\" All rights reserved.  The Berkeley software License Agreement
.\" specifies the terms and conditions for redistribution.
.\"
.\"	@(#)ts.4	6.1 (Berkeley) 5/15/85
.\"
.TH TS 4 "May 15, 1985"
.UC 4
.SH NAME
ts \- TS-11 magtape interface
.SH SYNOPSIS
.B "controller zs0 at uba? csr 0172520 vector tsintr"
.br
.B "tape ts0 at zs0 drive 0"
.SH DESCRIPTION
The ts-11 combination provides a standard tape drive
interface as described in
.IR mtio (4).
The ts-11 operates only at 1600 bpi, and only one transport
is possible per controller.
.SH "SEE ALSO"
mt(1),
tar(1),
tp(1),
mtio(4),
ht(4),
tm(4),
mt(4),
ut(4)
.SH DIAGNOSTICS
\fBts%d: no write ring\fR.  An attempt was made to write on the tape drive
when no write ring was present; this message is written on the terminal of
the user who tried to access the tape.
.PP
\fBts%d: not online\fR.  An attempt was made to access the tape while it
was offline; this message is written on the terminal of the user
who tried to access the tape.
.PP
\fBts%d: hard error bn%d xs0=%b\fR.  A hard error occurred on the tape
at block \fIbn\fR; status register 0 is printed in octal and symbolically
decoded as bits.
.SH BUGS
If any non-data error is encountered on non-raw tape, it refuses to do anything
more until closed.
.PP
The device lives at the same address as a tm-11
.IR tm (4);
as it is very difficult to get this device to interrupt, a generic
system assumes that a ts is present whenever no tm-11 exists but
the csr responds and a ts-11 is configured.
This does no harm as long as a non-existent ts-11 is not accessed.

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.