|
|
1.1 ! root 1: /* ! 2: * Copyright (c) 1988 University of Utah. ! 3: * Copyright (c) 1990 The Regents of the University of California. ! 4: * All rights reserved. ! 5: * ! 6: * This code is derived from software contributed to Berkeley by ! 7: * the Systems Programming Group of the University of Utah Computer ! 8: * Science Department. ! 9: * ! 10: * Redistribution is only permitted until one year after the first shipment ! 11: * of 4.4BSD by the Regents. Otherwise, redistribution and use in source and ! 12: * binary forms are permitted provided that: (1) source distributions retain ! 13: * this entire copyright notice and comment, and (2) distributions including ! 14: * binaries display the following acknowledgement: This product includes ! 15: * software developed by the University of California, Berkeley and its ! 16: * contributors'' in the documentation or other materials provided with the ! 17: * distribution and in all advertising materials mentioning features or use ! 18: * of this software. Neither the name of the University nor the names of ! 19: * its contributors may be used to endorse or promote products derived from ! 20: * this software without specific prior written permission. ! 21: * THIS SOFTWARE IS PROVIDED AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED ! 22: * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF ! 23: * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ! 24: * ! 25: * from: Utah $Hdr: grf_gbreg.h 1.10 89/08/25$ ! 26: * ! 27: * @(#)grf_gbreg.h 7.1 (Berkeley) 5/8/90 ! 28: */ ! 29: ! 30: /* ! 31: * Gatorbox driver regs ! 32: */ ! 33: ! 34: #define TILER_ENABLE 0x80 ! 35: #define LINE_MOVER_ENABLE 0x80 ! 36: #define UP_LEFT 0x00 ! 37: #define DOWN_RIGHT 0x40 ! 38: #define MOVE_UP_LEFT TILER_ENABLE|UP_LEFT ! 39: #define MOVE_DOWN_RIGHT TILER_ENABLE|DOWN_RIGHT ! 40: ! 41: #define tile_mover_waitbusy(regaddr) \ ! 42: while (((struct gboxfb *)(regaddr))->sec_interrupt & 0x10) ! 43: ! 44: #define line_mover_waitbusy(regaddr) \ ! 45: while ((((struct gboxfb *)(regaddr))->status & 0x80) == 0) ! 46: ! 47: #define gbcm_waitbusy(regaddr) \ ! 48: while (((struct gboxfb *)(regaddr))->cmap_busy != 0xff) ! 49: ! 50: #define vu_char volatile u_char ! 51: ! 52: struct gboxfb { ! 53: u_char :8; ! 54: vu_char reset; /* reset register 0x01 */ ! 55: vu_char sec_interrupt; /* Secondary interrupt register 0x03 */ ! 56: vu_char interrupt; /* interrupt register 0x03 */ ! 57: u_char :8; ! 58: vu_char fbwmsb; /* frame buffer width MSB 0x05 */ ! 59: u_char :8; ! 60: vu_char fbwlsb; /* frame buffer width MSB 0x07 */ ! 61: u_char :8; ! 62: vu_char fbhmsb; /* frame buffer height MSB 0x09 */ ! 63: u_char :8; ! 64: vu_char fbhlsb; /* frame buffer height MSB 0x0b */ ! 65: u_char :8; ! 66: vu_char dwmsb; /* display width MSB 0x0d */ ! 67: u_char :8; ! 68: vu_char dwlsb; /* display width MSB 0x0f */ ! 69: u_char :8; ! 70: vu_char dhmsb; /* display height MSB 0x11 */ ! 71: u_char :8; ! 72: vu_char dhlsb; /* display height MSB 0x13 */ ! 73: u_char :8; ! 74: vu_char fbid; /* Scondary frame buffer id 0x15 */ ! 75: u_char f1[0x5d-0x15-1]; ! 76: vu_char fbomsb; /* frame buffer offset MSB 0x5d */ ! 77: u_char :8; ! 78: vu_char fbolsb; /* frame buffer offset LSB 0x5f */ ! 79: u_char f2[0x4000-0x5f-1]; ! 80: vu_char crtc_address; /* CTR controller address reg 0x4000 */ ! 81: vu_char status; /* Status register 0x4001 */ ! 82: vu_char crtc_data; /* CTR controller data reg 0x4002 */ ! 83: u_char f3[6]; ! 84: vu_char line_mover_rep_rule; /* Line move rep rule */ ! 85: u_char :8, :8; ! 86: vu_char line_mover_width; /* Line move width */ ! 87: u_char f4[0xff3]; ! 88: vu_char width; /* width in tiles 0x5001 */ ! 89: u_char :8; ! 90: vu_char height; /* height in tiles 0x5003 */ ! 91: u_char f5[3]; ! 92: vu_char rep_rule; /* replacement rule 0x5007 */ ! 93: u_char f6[0x6001-0x5007-1]; ! 94: vu_char blink1; /* blink 1 0x6001 */ ! 95: u_char f7[3]; ! 96: vu_char blink2; /* blink 2 0x6005 */ ! 97: u_char f8[3]; ! 98: vu_char write_protect; /* write protect 0x6009 */ ! 99: u_char f9[0x6803-0x6009-1]; ! 100: vu_char cmap_busy; /* color map busy 0x6803 */ ! 101: u_char f10[0x68b9-0x6803-1]; ! 102: vu_char creg_select; /* color map register select 0x68b8 */ ! 103: u_char f11[0x68f1-0x68b9-1]; ! 104: vu_char cmap_write; /* color map write trigger 0x68f1 */ ! 105: u_char f12[0x69b3-0x68f1-1]; ! 106: vu_char cmap_red; /* red value register 0x69b3 */ ! 107: u_char :8; ! 108: vu_char cmap_grn; /* green value register 0x69b5 */ ! 109: u_char :8; ! 110: vu_char cmap_blu; /* blue value register 0x69b6 */ ! 111: };
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.