![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to mpcctab CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [CSRG BSD Unix] / 43BSDReno / usr.sbin / dlmpcc / firmware|
Return to mpcctab CVS log | Up to [CSRG BSD Unix] / 43BSDReno / usr.sbin / dlmpcc / firmware |
1.1 root 1:
2:
3: # the configuration file will consist of a set of lines as follows:
4:
5: # MPCC: number[:FCCS,n1,n2...] [:SOC,n1,n2...] [: other arguments]
6: # protocol : argument 1 [: argument 2 ... n]
7: # port: number : protocol : argument 1 [:argument 2 ... n ]
8:
9: # The MPCC line identifies the board number, whether the board
10: # has an FCCS interface, and may have additional arguments in the future.
11: # The protocol line specifies a protocol to be used on the board.
12: # Its argument list is dependent on the protocol specified
13: # (e.g. for X.25, the arguments are N1, N2, T1, T2, T3, T4, K, xid fld1,
14: # xid fld2, xid fld3).
15: # PROTOCOL:X25:272:2:6000:1000:45000:20000:8:2:station:address
16: # N1 is max frame size in bytes, N2 is retry count,
17: # T1 to T4 are timers in milliseconds, K is level 2 window size.
18: # The xid fields correspond to the 3 fields in the XID command.
19: #
20: # The port line identifies a port for the last board defined preceding it.
21: # Its arguments are protocol dependent also
22: # (e.g. for X.25, the arguments are i xmit bufs, s/u xmit bufs, i recv bufs,
23: # s/u recv bufs, xmito, rts, dtr, lineidle, rcvadr, mask, xmtrty, baud,
24: # encode, trace)
25: # PORT:0:X25:8:8:8:8:0:1:1:0:1:3:1:0:0:0
26: # i xmit bufs are the number of transmit buffers to be allocated for i frames.
27: # s/u xmit bufs are the number of transmit buffers to be allocated for s/u frms.
28: # i recv bufs are the number of recieve buffers to be allocated for i frames.
29: # s/u recv bufs are the number of recieve buffers to be allocated for s/u frms.
30: # xmito is is the level 1 transmit timeout, this should always be zero so that
31: # level 1 calculates the xmit timeout from the baud rate.
32: # rts change 1=assert 2=drop 3=auto, dtr change 1=assert 2=drop
33: # lineidle 0=flag fill 1=mark fill, rcvadr 1 = port is DCE 3=port is DTE
34: # mask is data link recieve mask (should always be 3 for X25)
35: # xmtrty is number of data link retries if transmit timeout occurs.
36: # baud is the baud rate (0=modem,13=9600,26=56KB),see mp_port.h for others
37: # encode is data encoding 0=NRZ 1=NRZI
38: # trace is data link recieve trace, this should always be zero.
39: #
40: # The ASYNC protocol has one board level parameter, size of xmit/recv buffers.
41: # The port entries have no parameters.
42: #
43: # Conflicting protocols would be identified immediately.
44: # Multiple protocol lines would be illegal initially to insure only
45: # one protocol on the board. Subsequent releases could allow multiple
46: # protocol lines to support multiple protocols.
47:
48: # HERE ARE SOME SAMPLE ENTRIES
49: #
50: # MPCC:0
51: # PROTOCOL:X25:272:4:800:200:20000:20000:8:2:acey:deucy
52: # PORT:0:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
53: # PORT:1:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
54: # PORT:2:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
55: # PORT:3:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
56: # PORT:4:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
57: # PORT:5:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
58: # PORT:6:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
59: # PORT:7:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
60: # PORT:8:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
61: # PORT:9:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
62: # PORT:10:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
63: # PORT:11:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
64: # PORT:12:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
65: # PORT:13:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
66: # PORT:14:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
67: # PORT:15:X25:8:10:10:24:0:1:1:0:3:3:1:0:0:0
68: #
69: # MPCC:1
70: # PROTOCOL:ASYNC:128
71: # PORT:0:ASYNC
72: # PORT:1:ASYNC
73: # PORT:2:ASYNC
74: # PORT:3:ASYNC
75: # PORT:4:ASYNC
76: # PORT:5:ASYNC
77: # PORT:6:ASYNC
78: # PORT:7:ASYNC
79: # PORT:8:ASYNC
80: # PORT:9:ASYNC
81: # PORT:10:ASYNC
82: # PORT:11:ASYNC
83: # PORT:12:ASYNC
84: # PORT:13:ASYNC
85: # PORT:14:ASYNC
86: # PORT:15:ASYNC
87:
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.