Annotation of 43BSDTahoe/etc/restore/tape.c, revision 1.1

1.1     ! root        1: /*
        !             2:  * Copyright (c) 1983 Regents of the University of California.
        !             3:  * All rights reserved.  The Berkeley software License Agreement
        !             4:  * specifies the terms and conditions for redistribution.
        !             5:  */
        !             6: 
        !             7: #ifndef lint
        !             8: static char sccsid[] = "@(#)tape.c     5.14 (Berkeley) 5/13/88";
        !             9: #endif not lint
        !            10: 
        !            11: #include "restore.h"
        !            12: #include <protocols/dumprestore.h>
        !            13: #include <sys/ioctl.h>
        !            14: #include <sys/mtio.h>
        !            15: #include <sys/file.h>
        !            16: #include <setjmp.h>
        !            17: #include <sys/stat.h>
        !            18: 
        !            19: static long    fssize = MAXBSIZE;
        !            20: static int     mt = -1;
        !            21: static int     pipein = 0;
        !            22: static char    magtape[BUFSIZ];
        !            23: static int     bct;
        !            24: static char    *tbf;
        !            25: static union   u_spcl endoftapemark;
        !            26: static long    blksread;
        !            27: static long    tapesread;
        !            28: static jmp_buf restart;
        !            29: static int     gettingfile = 0;        /* restart has a valid frame */
        !            30: 
        !            31: static int     ofile;
        !            32: static char    *map;
        !            33: static char    lnkbuf[MAXPATHLEN + 1];
        !            34: static int     pathlen;
        !            35: 
        !            36: int            Bcvt;           /* Swap Bytes (for CCI or sun) */
        !            37: static int     Qcvt;           /* Swap quads (for sun) */
        !            38: /*
        !            39:  * Set up an input source
        !            40:  */
        !            41: setinput(source)
        !            42:        char *source;
        !            43: {
        !            44: #ifdef RRESTORE
        !            45:        char *host, *tape;
        !            46: #endif RRESTORE
        !            47: 
        !            48:        flsht();
        !            49:        if (bflag)
        !            50:                newtapebuf(ntrec);
        !            51:        else
        !            52:                newtapebuf(NTREC > HIGHDENSITYTREC ? NTREC : HIGHDENSITYTREC);
        !            53:        terminal = stdin;
        !            54: #ifdef RRESTORE
        !            55:        host = source;
        !            56:        tape = index(host, ':');
        !            57:        if (tape == 0) {
        !            58: nohost:
        !            59:                msg("need keyletter ``f'' and device ``host:tape''\n");
        !            60:                done(1);
        !            61:        }
        !            62:        *tape++ = '\0';
        !            63:        (void) strcpy(magtape, tape);
        !            64:        if (rmthost(host) == 0)
        !            65:                done(1);
        !            66:        setuid(getuid());       /* no longer need or want root privileges */
        !            67: #else
        !            68:        if (strcmp(source, "-") == 0) {
        !            69:                /*
        !            70:                 * Since input is coming from a pipe we must establish
        !            71:                 * our own connection to the terminal.
        !            72:                 */
        !            73:                terminal = fopen("/dev/tty", "r");
        !            74:                if (terminal == NULL) {
        !            75:                        perror("Cannot open(\"/dev/tty\")");
        !            76:                        terminal = fopen("/dev/null", "r");
        !            77:                        if (terminal == NULL) {
        !            78:                                perror("Cannot open(\"/dev/null\")");
        !            79:                                done(1);
        !            80:                        }
        !            81:                }
        !            82:                pipein++;
        !            83:        }
        !            84:        (void) strcpy(magtape, source);
        !            85: #endif RRESTORE
        !            86: }
        !            87: 
        !            88: newtapebuf(size)
        !            89:        long size;
        !            90: {
        !            91:        static tbfsize = -1;
        !            92: 
        !            93:        ntrec = size;
        !            94:        if (size <= tbfsize)
        !            95:                return;
        !            96:        if (tbf != NULL)
        !            97:                free(tbf);
        !            98:        tbf = (char *)malloc(size * TP_BSIZE);
        !            99:        if (tbf == NULL) {
        !           100:                fprintf(stderr, "Cannot allocate space for tape buffer\n");
        !           101:                done(1);
        !           102:        }
        !           103:        tbfsize = size;
        !           104: }
        !           105: 
        !           106: /*
        !           107:  * Verify that the tape drive can be accessed and
        !           108:  * that it actually is a dump tape.
        !           109:  */
        !           110: setup()
        !           111: {
        !           112:        int i, j, *ip;
        !           113:        struct stat stbuf;
        !           114:        extern int xtrmap(), xtrmapskip();
        !           115: 
        !           116:        vprintf(stdout, "Verify tape and initialize maps\n");
        !           117: #ifdef RRESTORE
        !           118:        if ((mt = rmtopen(magtape, 0)) < 0)
        !           119: #else
        !           120:        if (pipein)
        !           121:                mt = 0;
        !           122:        else if ((mt = open(magtape, 0)) < 0)
        !           123: #endif
        !           124:        {
        !           125:                perror(magtape);
        !           126:                done(1);
        !           127:        }
        !           128:        volno = 1;
        !           129:        setdumpnum();
        !           130:        flsht();
        !           131:        if (!pipein && !bflag)
        !           132:                findtapeblksize();
        !           133:        if (gethead(&spcl) == FAIL) {
        !           134:                bct--; /* push back this block */
        !           135:                cvtflag++;
        !           136:                if (gethead(&spcl) == FAIL) {
        !           137:                        fprintf(stderr, "Tape is not a dump tape\n");
        !           138:                        done(1);
        !           139:                }
        !           140:                fprintf(stderr, "Converting to new file system format.\n");
        !           141:        }
        !           142:        if (pipein) {
        !           143:                endoftapemark.s_spcl.c_magic = cvtflag ? OFS_MAGIC : NFS_MAGIC;
        !           144:                endoftapemark.s_spcl.c_type = TS_END;
        !           145:                ip = (int *)&endoftapemark;
        !           146:                j = sizeof(union u_spcl) / sizeof(int);
        !           147:                i = 0;
        !           148:                do
        !           149:                        i += *ip++;
        !           150:                while (--j);
        !           151:                endoftapemark.s_spcl.c_checksum = CHECKSUM - i;
        !           152:        }
        !           153:        if (vflag || command == 't')
        !           154:                printdumpinfo();
        !           155:        dumptime = spcl.c_ddate;
        !           156:        dumpdate = spcl.c_date;
        !           157:        if (stat(".", &stbuf) < 0) {
        !           158:                perror("cannot stat .");
        !           159:                done(1);
        !           160:        }
        !           161:        if (stbuf.st_blksize > 0 && stbuf.st_blksize <= MAXBSIZE)
        !           162:                fssize = stbuf.st_blksize;
        !           163:        if (((fssize - 1) & fssize) != 0) {
        !           164:                fprintf(stderr, "bad block size %d\n", fssize);
        !           165:                done(1);
        !           166:        }
        !           167:        if (checkvol(&spcl, (long)1) == FAIL) {
        !           168:                fprintf(stderr, "Tape is not volume 1 of the dump\n");
        !           169:                done(1);
        !           170:        }
        !           171:        if (readhdr(&spcl) == FAIL)
        !           172:                panic("no header after volume mark!\n");
        !           173:        findinode(&spcl);
        !           174:        if (checktype(&spcl, TS_CLRI) == FAIL) {
        !           175:                fprintf(stderr, "Cannot find file removal list\n");
        !           176:                done(1);
        !           177:        }
        !           178:        maxino = (spcl.c_count * TP_BSIZE * NBBY) + 1;
        !           179:        dprintf(stdout, "maxino = %d\n", maxino);
        !           180:        map = calloc((unsigned)1, (unsigned)howmany(maxino, NBBY));
        !           181:        if (map == (char *)NIL)
        !           182:                panic("no memory for file removal list\n");
        !           183:        clrimap = map;
        !           184:        curfile.action = USING;
        !           185:        getfile(xtrmap, xtrmapskip);
        !           186:        if (checktype(&spcl, TS_BITS) == FAIL) {
        !           187:                fprintf(stderr, "Cannot find file dump list\n");
        !           188:                done(1);
        !           189:        }
        !           190:        map = calloc((unsigned)1, (unsigned)howmany(maxino, NBBY));
        !           191:        if (map == (char *)NULL)
        !           192:                panic("no memory for file dump list\n");
        !           193:        dumpmap = map;
        !           194:        curfile.action = USING;
        !           195:        getfile(xtrmap, xtrmapskip);
        !           196: }
        !           197: 
        !           198: /*
        !           199:  * Prompt user to load a new dump volume.
        !           200:  * "Nextvol" is the next suggested volume to use.
        !           201:  * This suggested volume is enforced when doing full
        !           202:  * or incremental restores, but can be overrridden by
        !           203:  * the user when only extracting a subset of the files.
        !           204:  */
        !           205: getvol(nextvol)
        !           206:        long nextvol;
        !           207: {
        !           208:        long newvol;
        !           209:        long savecnt, i;
        !           210:        union u_spcl tmpspcl;
        !           211: #      define tmpbuf tmpspcl.s_spcl
        !           212:        char buf[TP_BSIZE];
        !           213:        extern char *ctime();
        !           214: 
        !           215:        if (nextvol == 1) {
        !           216:                tapesread = 0;
        !           217:                gettingfile = 0;
        !           218:        }
        !           219:        if (pipein) {
        !           220:                if (nextvol != 1)
        !           221:                        panic("Changing volumes on pipe input?\n");
        !           222:                if (volno == 1)
        !           223:                        return;
        !           224:                goto gethdr;
        !           225:        }
        !           226:        savecnt = blksread;
        !           227: again:
        !           228:        if (pipein)
        !           229:                done(1); /* pipes do not get a second chance */
        !           230:        if (command == 'R' || command == 'r' || curfile.action != SKIP)
        !           231:                newvol = nextvol;
        !           232:        else 
        !           233:                newvol = 0;
        !           234:        while (newvol <= 0) {
        !           235:                if (tapesread == 0) {
        !           236:                        fprintf(stderr, "%s%s%s%s%s",
        !           237:                            "You have not read any tapes yet.\n",
        !           238:                            "Unless you know which volume your",
        !           239:                            " file(s) are on you should start\n",
        !           240:                            "with the last volume and work",
        !           241:                            " towards towards the first.\n");
        !           242:                } else {
        !           243:                        fprintf(stderr, "You have read volumes");
        !           244:                        strcpy(tbf, ": ");
        !           245:                        for (i = 1; i < 32; i++)
        !           246:                                if (tapesread & (1 << i)) {
        !           247:                                        fprintf(stderr, "%s%d", tbf, i);
        !           248:                                        strcpy(tbf, ", ");
        !           249:                                }
        !           250:                        fprintf(stderr, "\n");
        !           251:                }
        !           252:                do      {
        !           253:                        fprintf(stderr, "Specify next volume #: ");
        !           254:                        (void) fflush(stderr);
        !           255:                        (void) fgets(tbf, BUFSIZ, terminal);
        !           256:                } while (!feof(terminal) && tbf[0] == '\n');
        !           257:                if (feof(terminal))
        !           258:                        done(1);
        !           259:                newvol = atoi(tbf);
        !           260:                if (newvol <= 0) {
        !           261:                        fprintf(stderr,
        !           262:                            "Volume numbers are positive numerics\n");
        !           263:                }
        !           264:        }
        !           265:        if (newvol == volno) {
        !           266:                tapesread |= 1 << volno;
        !           267:                return;
        !           268:        }
        !           269:        closemt();
        !           270:        fprintf(stderr, "Mount tape volume %d\n", newvol);
        !           271:        fprintf(stderr, "then enter tape name (default: %s) ", magtape);
        !           272:        (void) fflush(stderr);
        !           273:        (void) fgets(tbf, BUFSIZ, terminal);
        !           274:        if (feof(terminal))
        !           275:                done(1);
        !           276:        if (tbf[0] != '\n') {
        !           277:                (void) strcpy(magtape, tbf);
        !           278:                magtape[strlen(magtape) - 1] = '\0';
        !           279:        }
        !           280: #ifdef RRESTORE
        !           281:        if ((mt = rmtopen(magtape, 0)) == -1)
        !           282: #else
        !           283:        if ((mt = open(magtape, 0)) == -1)
        !           284: #endif
        !           285:        {
        !           286:                fprintf(stderr, "Cannot open %s\n", magtape);
        !           287:                volno = -1;
        !           288:                goto again;
        !           289:        }
        !           290: gethdr:
        !           291:        volno = newvol;
        !           292:        setdumpnum();
        !           293:        flsht();
        !           294:        if (readhdr(&tmpbuf) == FAIL) {
        !           295:                fprintf(stderr, "tape is not dump tape\n");
        !           296:                volno = 0;
        !           297:                goto again;
        !           298:        }
        !           299:        if (checkvol(&tmpbuf, volno) == FAIL) {
        !           300:                fprintf(stderr, "Wrong volume (%d)\n", tmpbuf.c_volume);
        !           301:                volno = 0;
        !           302:                goto again;
        !           303:        }
        !           304:        if (tmpbuf.c_date != dumpdate || tmpbuf.c_ddate != dumptime) {
        !           305:                fprintf(stderr, "Wrong dump date\n\tgot: %s",
        !           306:                        ctime(&tmpbuf.c_date));
        !           307:                fprintf(stderr, "\twanted: %s", ctime(&dumpdate));
        !           308:                volno = 0;
        !           309:                goto again;
        !           310:        }
        !           311:        tapesread |= 1 << volno;
        !           312:        blksread = savecnt;
        !           313:        if (curfile.action == USING) {
        !           314:                if (volno == 1)
        !           315:                        panic("active file into volume 1\n");
        !           316:                return;
        !           317:        }
        !           318:        /*
        !           319:         * Skip up to the beginning of the next record
        !           320:         */
        !           321:        if (tmpbuf.c_type == TS_TAPE && (tmpbuf.c_flags & DR_NEWHEADER))
        !           322:                for (i = tmpbuf.c_count; i > 0; i--)
        !           323:                        readtape(buf);
        !           324:        (void) gethead(&spcl);
        !           325:        findinode(&spcl);
        !           326:        if (gettingfile) {
        !           327:                gettingfile = 0;
        !           328:                longjmp(restart, 1);
        !           329:        }
        !           330: }
        !           331: 
        !           332: /*
        !           333:  * handle multiple dumps per tape by skipping forward to the
        !           334:  * appropriate one.
        !           335:  */
        !           336: setdumpnum()
        !           337: {
        !           338:        struct mtop tcom;
        !           339: 
        !           340:        if (dumpnum == 1 || volno != 1)
        !           341:                return;
        !           342:        if (pipein) {
        !           343:                fprintf(stderr, "Cannot have multiple dumps on pipe input\n");
        !           344:                done(1);
        !           345:        }
        !           346:        tcom.mt_op = MTFSF;
        !           347:        tcom.mt_count = dumpnum - 1;
        !           348: #ifdef RRESTORE
        !           349:        rmtioctl(MTFSF, dumpnum - 1);
        !           350: #else
        !           351:        if (ioctl(mt, (int)MTIOCTOP, (char *)&tcom) < 0)
        !           352:                perror("ioctl MTFSF");
        !           353: #endif
        !           354: }
        !           355: 
        !           356: printdumpinfo()
        !           357: {
        !           358:        extern char *ctime();
        !           359: 
        !           360:        fprintf(stdout, "Dump   date: %s", ctime(&spcl.c_date));
        !           361:        fprintf(stdout, "Dumped from: %s",
        !           362:            (spcl.c_ddate == 0) ? "the epoch\n" : ctime(&spcl.c_ddate));
        !           363:        if (spcl.c_host[0] == '\0')
        !           364:                return;
        !           365:        fprintf(stderr, "Level %d dump of %s on %s:%s\n",
        !           366:                spcl.c_level, spcl.c_filesys, spcl.c_host, spcl.c_dev);
        !           367:        fprintf(stderr, "Label: %s\n", spcl.c_label);
        !           368: }
        !           369: 
        !           370: extractfile(name)
        !           371:        char *name;
        !           372: {
        !           373:        int mode;
        !           374:        time_t timep[2];
        !           375:        struct entry *ep;
        !           376:        extern int xtrlnkfile(), xtrlnkskip();
        !           377:        extern int xtrfile(), xtrskip();
        !           378: 
        !           379:        curfile.name = name;
        !           380:        curfile.action = USING;
        !           381:        timep[0] = curfile.dip->di_atime;
        !           382:        timep[1] = curfile.dip->di_mtime;
        !           383:        mode = curfile.dip->di_mode;
        !           384:        switch (mode & IFMT) {
        !           385: 
        !           386:        default:
        !           387:                fprintf(stderr, "%s: unknown file mode 0%o\n", name, mode);
        !           388:                skipfile();
        !           389:                return (FAIL);
        !           390: 
        !           391:        case IFSOCK:
        !           392:                vprintf(stdout, "skipped socket %s\n", name);
        !           393:                skipfile();
        !           394:                return (GOOD);
        !           395: 
        !           396:        case IFDIR:
        !           397:                if (mflag) {
        !           398:                        ep = lookupname(name);
        !           399:                        if (ep == NIL || ep->e_flags & EXTRACT)
        !           400:                                panic("unextracted directory %s\n", name);
        !           401:                        skipfile();
        !           402:                        return (GOOD);
        !           403:                }
        !           404:                vprintf(stdout, "extract file %s\n", name);
        !           405:                return (genliteraldir(name, curfile.ino));
        !           406: 
        !           407:        case IFLNK:
        !           408:                lnkbuf[0] = '\0';
        !           409:                pathlen = 0;
        !           410:                getfile(xtrlnkfile, xtrlnkskip);
        !           411:                if (pathlen == 0) {
        !           412:                        vprintf(stdout,
        !           413:                            "%s: zero length symbolic link (ignored)\n", name);
        !           414:                        return (GOOD);
        !           415:                }
        !           416:                return (linkit(lnkbuf, name, SYMLINK));
        !           417: 
        !           418:        case IFCHR:
        !           419:        case IFBLK:
        !           420:                vprintf(stdout, "extract special file %s\n", name);
        !           421:                if (Nflag) {
        !           422:                        skipfile();
        !           423:                        return (GOOD);
        !           424:                }
        !           425:                if (mknod(name, mode, (int)curfile.dip->di_rdev) < 0) {
        !           426:                        fprintf(stderr, "%s: ", name);
        !           427:                        (void) fflush(stderr);
        !           428:                        perror("cannot create special file");
        !           429:                        skipfile();
        !           430:                        return (FAIL);
        !           431:                }
        !           432:                (void) chown(name, curfile.dip->di_uid, curfile.dip->di_gid);
        !           433:                (void) chmod(name, mode);
        !           434:                skipfile();
        !           435:                utime(name, timep);
        !           436:                return (GOOD);
        !           437: 
        !           438:        case IFREG:
        !           439:                vprintf(stdout, "extract file %s\n", name);
        !           440:                if (Nflag) {
        !           441:                        skipfile();
        !           442:                        return (GOOD);
        !           443:                }
        !           444:                if ((ofile = creat(name, 0666)) < 0) {
        !           445:                        fprintf(stderr, "%s: ", name);
        !           446:                        (void) fflush(stderr);
        !           447:                        perror("cannot create file");
        !           448:                        skipfile();
        !           449:                        return (FAIL);
        !           450:                }
        !           451:                (void) fchown(ofile, curfile.dip->di_uid, curfile.dip->di_gid);
        !           452:                (void) fchmod(ofile, mode);
        !           453:                getfile(xtrfile, xtrskip);
        !           454:                (void) close(ofile);
        !           455:                utime(name, timep);
        !           456:                return (GOOD);
        !           457:        }
        !           458:        /* NOTREACHED */
        !           459: }
        !           460: 
        !           461: /*
        !           462:  * skip over bit maps on the tape
        !           463:  */
        !           464: skipmaps()
        !           465: {
        !           466: 
        !           467:        while (checktype(&spcl, TS_CLRI) == GOOD ||
        !           468:               checktype(&spcl, TS_BITS) == GOOD)
        !           469:                skipfile();
        !           470: }
        !           471: 
        !           472: /*
        !           473:  * skip over a file on the tape
        !           474:  */
        !           475: skipfile()
        !           476: {
        !           477:        extern int null();
        !           478: 
        !           479:        curfile.action = SKIP;
        !           480:        getfile(null, null);
        !           481: }
        !           482: 
        !           483: /*
        !           484:  * Do the file extraction, calling the supplied functions
        !           485:  * with the blocks
        !           486:  */
        !           487: getfile(f1, f2)
        !           488:        int     (*f2)(), (*f1)();
        !           489: {
        !           490:        register int i;
        !           491:        int curblk = 0;
        !           492:        off_t size = spcl.c_dinode.di_size;
        !           493:        static char clearedbuf[MAXBSIZE];
        !           494:        char buf[MAXBSIZE / TP_BSIZE][TP_BSIZE];
        !           495:        char junk[TP_BSIZE];
        !           496: 
        !           497:        if (checktype(&spcl, TS_END) == GOOD)
        !           498:                panic("ran off end of tape\n");
        !           499:        if (ishead(&spcl) == FAIL)
        !           500:                panic("not at beginning of a file\n");
        !           501:        if (!gettingfile && setjmp(restart) != 0)
        !           502:                return;
        !           503:        gettingfile++;
        !           504: loop:
        !           505:        for (i = 0; i < spcl.c_count; i++) {
        !           506:                if (spcl.c_addr[i]) {
        !           507:                        readtape(&buf[curblk++][0]);
        !           508:                        if (curblk == fssize / TP_BSIZE) {
        !           509:                                (*f1)(buf, size > TP_BSIZE ?
        !           510:                                     (long) (fssize) :
        !           511:                                     (curblk - 1) * TP_BSIZE + size);
        !           512:                                curblk = 0;
        !           513:                        }
        !           514:                } else {
        !           515:                        if (curblk > 0) {
        !           516:                                (*f1)(buf, size > TP_BSIZE ?
        !           517:                                     (long) (curblk * TP_BSIZE) :
        !           518:                                     (curblk - 1) * TP_BSIZE + size);
        !           519:                                curblk = 0;
        !           520:                        }
        !           521:                        (*f2)(clearedbuf, size > TP_BSIZE ?
        !           522:                                (long) TP_BSIZE : size);
        !           523:                }
        !           524:                if ((size -= TP_BSIZE) <= 0) {
        !           525:                        for (i++; i < spcl.c_count; i++)
        !           526:                                if (spcl.c_addr[i])
        !           527:                                        readtape(junk);
        !           528:                        break;
        !           529:                }
        !           530:        }
        !           531:        if (readhdr(&spcl) == GOOD && size > 0) {
        !           532:                if (checktype(&spcl, TS_ADDR) == GOOD)
        !           533:                        goto loop;
        !           534:                dprintf(stdout, "Missing address (header) block for %s\n",
        !           535:                        curfile.name);
        !           536:        }
        !           537:        if (curblk > 0)
        !           538:                (*f1)(buf, (curblk * TP_BSIZE) + size);
        !           539:        findinode(&spcl);
        !           540:        gettingfile = 0;
        !           541: }
        !           542: 
        !           543: /*
        !           544:  * The next routines are called during file extraction to
        !           545:  * put the data into the right form and place.
        !           546:  */
        !           547: xtrfile(buf, size)
        !           548:        char    *buf;
        !           549:        long    size;
        !           550: {
        !           551: 
        !           552:        if (Nflag)
        !           553:                return;
        !           554:        if (write(ofile, buf, (int) size) == -1) {
        !           555:                fprintf(stderr, "write error extracting inode %d, name %s\n",
        !           556:                        curfile.ino, curfile.name);
        !           557:                perror("write");
        !           558:                done(1);
        !           559:        }
        !           560: }
        !           561: 
        !           562: xtrskip(buf, size)
        !           563:        char *buf;
        !           564:        long size;
        !           565: {
        !           566: 
        !           567: #ifdef lint
        !           568:        buf = buf;
        !           569: #endif
        !           570:        if (lseek(ofile, size, 1) == (long)-1) {
        !           571:                fprintf(stderr, "seek error extracting inode %d, name %s\n",
        !           572:                        curfile.ino, curfile.name);
        !           573:                perror("lseek");
        !           574:                done(1);
        !           575:        }
        !           576: }
        !           577: 
        !           578: xtrlnkfile(buf, size)
        !           579:        char    *buf;
        !           580:        long    size;
        !           581: {
        !           582: 
        !           583:        pathlen += size;
        !           584:        if (pathlen > MAXPATHLEN) {
        !           585:                fprintf(stderr, "symbolic link name: %s->%s%s; too long %d\n",
        !           586:                    curfile.name, lnkbuf, buf, pathlen);
        !           587:                done(1);
        !           588:        }
        !           589:        (void) strcat(lnkbuf, buf);
        !           590: }
        !           591: 
        !           592: xtrlnkskip(buf, size)
        !           593:        char *buf;
        !           594:        long size;
        !           595: {
        !           596: 
        !           597: #ifdef lint
        !           598:        buf = buf, size = size;
        !           599: #endif
        !           600:        fprintf(stderr, "unallocated block in symbolic link %s\n",
        !           601:                curfile.name);
        !           602:        done(1);
        !           603: }
        !           604: 
        !           605: xtrmap(buf, size)
        !           606:        char    *buf;
        !           607:        long    size;
        !           608: {
        !           609: 
        !           610:        bcopy(buf, map, size);
        !           611:        map += size;
        !           612: }
        !           613: 
        !           614: xtrmapskip(buf, size)
        !           615:        char *buf;
        !           616:        long size;
        !           617: {
        !           618: 
        !           619: #ifdef lint
        !           620:        buf = buf;
        !           621: #endif
        !           622:        panic("hole in map\n");
        !           623:        map += size;
        !           624: }
        !           625: 
        !           626: null() {;}
        !           627: 
        !           628: /*
        !           629:  * Do the tape i/o, dealing with volume changes
        !           630:  * etc..
        !           631:  */
        !           632: readtape(b)
        !           633:        char *b;
        !           634: {
        !           635:        register long i;
        !           636:        long rd, newvol;
        !           637:        int cnt;
        !           638: 
        !           639:        if (bct < ntrec) {
        !           640:                bcopy(&tbf[(bct++*TP_BSIZE)], b, (long)TP_BSIZE);
        !           641:                blksread++;
        !           642:                return;
        !           643:        }
        !           644:        for (i = 0; i < ntrec; i++)
        !           645:                ((struct s_spcl *)&tbf[i*TP_BSIZE])->c_magic = 0;
        !           646:        bct = 0;
        !           647:        cnt = ntrec*TP_BSIZE;
        !           648:        rd = 0;
        !           649: getmore:
        !           650: #ifdef RRESTORE
        !           651:        i = rmtread(&tbf[rd], cnt);
        !           652: #else
        !           653:        i = read(mt, &tbf[rd], cnt);
        !           654: #endif
        !           655:        if (i > 0 && i != ntrec*TP_BSIZE) {
        !           656:                if (pipein) {
        !           657:                        rd += i;
        !           658:                        cnt -= i;
        !           659:                        if (cnt > 0)
        !           660:                                goto getmore;
        !           661:                        i = rd;
        !           662:                } else {
        !           663:                        if (i % TP_BSIZE != 0)
        !           664:                                panic("partial block read: %d should be %d\n",
        !           665:                                        i, ntrec * TP_BSIZE);
        !           666:                        bcopy((char *)&endoftapemark, &tbf[i],
        !           667:                                (long)TP_BSIZE);
        !           668:                }
        !           669:        }
        !           670:        if (i < 0) {
        !           671:                fprintf(stderr, "Tape read error while ");
        !           672:                switch (curfile.action) {
        !           673:                default:
        !           674:                        fprintf(stderr, "trying to set up tape\n");
        !           675:                        break;
        !           676:                case UNKNOWN:
        !           677:                        fprintf(stderr, "trying to resynchronize\n");
        !           678:                        break;
        !           679:                case USING:
        !           680:                        fprintf(stderr, "restoring %s\n", curfile.name);
        !           681:                        break;
        !           682:                case SKIP:
        !           683:                        fprintf(stderr, "skipping over inode %d\n",
        !           684:                                curfile.ino);
        !           685:                        break;
        !           686:                }
        !           687:                if (!yflag && !reply("continue"))
        !           688:                        done(1);
        !           689:                i = ntrec*TP_BSIZE;
        !           690:                bzero(tbf, i);
        !           691: #ifdef RRESTORE
        !           692:                if (rmtseek(i, 1) < 0)
        !           693: #else
        !           694:                if (lseek(mt, i, 1) == (long)-1)
        !           695: #endif
        !           696:                {
        !           697:                        perror("continuation failed");
        !           698:                        done(1);
        !           699:                }
        !           700:        }
        !           701:        if (i == 0) {
        !           702:                if (!pipein) {
        !           703:                        newvol = volno + 1;
        !           704:                        volno = 0;
        !           705:                        getvol(newvol);
        !           706:                        readtape(b);
        !           707:                        return;
        !           708:                }
        !           709:                if (rd % TP_BSIZE != 0)
        !           710:                        panic("partial block read: %d should be %d\n",
        !           711:                                rd, ntrec * TP_BSIZE);
        !           712:                bcopy((char *)&endoftapemark, &tbf[rd], (long)TP_BSIZE);
        !           713:        }
        !           714:        bcopy(&tbf[(bct++*TP_BSIZE)], b, (long)TP_BSIZE);
        !           715:        blksread++;
        !           716: }
        !           717: 
        !           718: findtapeblksize()
        !           719: {
        !           720:        register long i;
        !           721: 
        !           722:        for (i = 0; i < ntrec; i++)
        !           723:                ((struct s_spcl *)&tbf[i * TP_BSIZE])->c_magic = 0;
        !           724:        bct = 0;
        !           725: #ifdef RRESTORE
        !           726:        i = rmtread(tbf, ntrec * TP_BSIZE);
        !           727: #else
        !           728:        i = read(mt, tbf, ntrec * TP_BSIZE);
        !           729: #endif
        !           730:        if (i <= 0) {
        !           731:                perror("Tape read error");
        !           732:                done(1);
        !           733:        }
        !           734:        if (i % TP_BSIZE != 0) {
        !           735:                fprintf(stderr, "Tape block size (%d) %s (%d)\n",
        !           736:                        i, "is not a multiple of dump block size", TP_BSIZE);
        !           737:                done(1);
        !           738:        }
        !           739:        ntrec = i / TP_BSIZE;
        !           740:        vprintf(stdout, "Tape block size is %d\n", ntrec);
        !           741: }
        !           742: 
        !           743: flsht()
        !           744: {
        !           745: 
        !           746:        bct = ntrec+1;
        !           747: }
        !           748: 
        !           749: closemt()
        !           750: {
        !           751:        if (mt < 0)
        !           752:                return;
        !           753: #ifdef RRESTORE
        !           754:        rmtclose();
        !           755: #else
        !           756:        (void) close(mt);
        !           757: #endif
        !           758: }
        !           759: 
        !           760: checkvol(b, t)
        !           761:        struct s_spcl *b;
        !           762:        long t;
        !           763: {
        !           764: 
        !           765:        if (b->c_volume != t)
        !           766:                return(FAIL);
        !           767:        return(GOOD);
        !           768: }
        !           769: 
        !           770: readhdr(b)
        !           771:        struct s_spcl *b;
        !           772: {
        !           773: 
        !           774:        if (gethead(b) == FAIL) {
        !           775:                dprintf(stdout, "readhdr fails at %d blocks\n", blksread);
        !           776:                return(FAIL);
        !           777:        }
        !           778:        return(GOOD);
        !           779: }
        !           780: 
        !           781: /*
        !           782:  * read the tape into buf, then return whether or
        !           783:  * or not it is a header block.
        !           784:  */
        !           785: gethead(buf)
        !           786:        struct s_spcl *buf;
        !           787: {
        !           788:        long i, *j;
        !           789:        union u_ospcl {
        !           790:                char dummy[TP_BSIZE];
        !           791:                struct  s_ospcl {
        !           792:                        long    c_type;
        !           793:                        long    c_date;
        !           794:                        long    c_ddate;
        !           795:                        long    c_volume;
        !           796:                        long    c_tapea;
        !           797:                        u_short c_inumber;
        !           798:                        long    c_magic;
        !           799:                        long    c_checksum;
        !           800:                        struct odinode {
        !           801:                                unsigned short odi_mode;
        !           802:                                u_short odi_nlink;
        !           803:                                u_short odi_uid;
        !           804:                                u_short odi_gid;
        !           805:                                long    odi_size;
        !           806:                                long    odi_rdev;
        !           807:                                char    odi_addr[36];
        !           808:                                long    odi_atime;
        !           809:                                long    odi_mtime;
        !           810:                                long    odi_ctime;
        !           811:                        } c_dinode;
        !           812:                        long    c_count;
        !           813:                        char    c_addr[256];
        !           814:                } s_ospcl;
        !           815:        } u_ospcl;
        !           816: 
        !           817:        if (!cvtflag) {
        !           818:                readtape((char *)buf);
        !           819:                if (buf->c_magic != NFS_MAGIC) {
        !           820:                        if (swabl(buf->c_magic) != NFS_MAGIC)
        !           821:                                return (FAIL);
        !           822:                        if (!Bcvt) {
        !           823:                                vprintf(stdout, "Note: Doing Byte swapping\n");
        !           824:                                Bcvt = 1;
        !           825:                        }
        !           826:                }
        !           827:                if (checksum((int *)buf) == FAIL)
        !           828:                        return (FAIL);
        !           829:                if (Bcvt)
        !           830:                        swabst("8l4s31l", (char *)buf);
        !           831:                goto good;
        !           832:        }
        !           833:        readtape((char *)(&u_ospcl.s_ospcl));
        !           834:        bzero((char *)buf, (long)TP_BSIZE);
        !           835:        buf->c_type = u_ospcl.s_ospcl.c_type;
        !           836:        buf->c_date = u_ospcl.s_ospcl.c_date;
        !           837:        buf->c_ddate = u_ospcl.s_ospcl.c_ddate;
        !           838:        buf->c_volume = u_ospcl.s_ospcl.c_volume;
        !           839:        buf->c_tapea = u_ospcl.s_ospcl.c_tapea;
        !           840:        buf->c_inumber = u_ospcl.s_ospcl.c_inumber;
        !           841:        buf->c_checksum = u_ospcl.s_ospcl.c_checksum;
        !           842:        buf->c_magic = u_ospcl.s_ospcl.c_magic;
        !           843:        buf->c_dinode.di_mode = u_ospcl.s_ospcl.c_dinode.odi_mode;
        !           844:        buf->c_dinode.di_nlink = u_ospcl.s_ospcl.c_dinode.odi_nlink;
        !           845:        buf->c_dinode.di_uid = u_ospcl.s_ospcl.c_dinode.odi_uid;
        !           846:        buf->c_dinode.di_gid = u_ospcl.s_ospcl.c_dinode.odi_gid;
        !           847:        buf->c_dinode.di_size = u_ospcl.s_ospcl.c_dinode.odi_size;
        !           848:        buf->c_dinode.di_rdev = u_ospcl.s_ospcl.c_dinode.odi_rdev;
        !           849:        buf->c_dinode.di_atime = u_ospcl.s_ospcl.c_dinode.odi_atime;
        !           850:        buf->c_dinode.di_mtime = u_ospcl.s_ospcl.c_dinode.odi_mtime;
        !           851:        buf->c_dinode.di_ctime = u_ospcl.s_ospcl.c_dinode.odi_ctime;
        !           852:        buf->c_count = u_ospcl.s_ospcl.c_count;
        !           853:        bcopy(u_ospcl.s_ospcl.c_addr, buf->c_addr, (long)256);
        !           854:        if (u_ospcl.s_ospcl.c_magic != OFS_MAGIC ||
        !           855:            checksum((int *)(&u_ospcl.s_ospcl)) == FAIL)
        !           856:                return(FAIL);
        !           857:        buf->c_magic = NFS_MAGIC;
        !           858: 
        !           859: good:
        !           860:        j = buf->c_dinode.di_ic.ic_size.val;
        !           861:        i = j[1];
        !           862:        if (buf->c_dinode.di_size == 0 &&
        !           863:            (buf->c_dinode.di_mode & IFMT) == IFDIR && Qcvt==0) {
        !           864:                if (*j || i) {
        !           865:                        printf("Note: Doing Quad swapping\n");
        !           866:                        Qcvt = 1;
        !           867:                }
        !           868:        }
        !           869:        if (Qcvt) {
        !           870:                j[1] = *j; *j = i;
        !           871:        }
        !           872:        switch (buf->c_type) {
        !           873: 
        !           874:        case TS_CLRI:
        !           875:        case TS_BITS:
        !           876:                /*
        !           877:                 * Have to patch up missing information in bit map headers
        !           878:                 */
        !           879:                buf->c_inumber = 0;
        !           880:                buf->c_dinode.di_size = buf->c_count * TP_BSIZE;
        !           881:                for (i = 0; i < buf->c_count; i++)
        !           882:                        buf->c_addr[i]++;
        !           883:                break;
        !           884: 
        !           885:        case TS_TAPE:
        !           886:        case TS_END:
        !           887:                buf->c_inumber = 0;
        !           888:                break;
        !           889: 
        !           890:        case TS_INODE:
        !           891:        case TS_ADDR:
        !           892:                break;
        !           893: 
        !           894:        default:
        !           895:                panic("gethead: unknown inode type %d\n", buf->c_type);
        !           896:                break;
        !           897:        }
        !           898:        if (dflag)
        !           899:                accthdr(buf);
        !           900:        return(GOOD);
        !           901: }
        !           902: 
        !           903: /*
        !           904:  * Check that a header is where it belongs and predict the next header
        !           905:  */
        !           906: accthdr(header)
        !           907:        struct s_spcl *header;
        !           908: {
        !           909:        static ino_t previno = 0x7fffffff;
        !           910:        static int prevtype;
        !           911:        static long predict;
        !           912:        long blks, i;
        !           913: 
        !           914:        if (header->c_type == TS_TAPE) {
        !           915:                fprintf(stderr, "Volume header\n");
        !           916:                previno = 0x7fffffff;
        !           917:                return;
        !           918:        }
        !           919:        if (previno == 0x7fffffff)
        !           920:                goto newcalc;
        !           921:        switch (prevtype) {
        !           922:        case TS_BITS:
        !           923:                fprintf(stderr, "Dump mask header");
        !           924:                break;
        !           925:        case TS_CLRI:
        !           926:                fprintf(stderr, "Remove mask header");
        !           927:                break;
        !           928:        case TS_INODE:
        !           929:                fprintf(stderr, "File header, ino %d", previno);
        !           930:                break;
        !           931:        case TS_ADDR:
        !           932:                fprintf(stderr, "File continuation header, ino %d", previno);
        !           933:                break;
        !           934:        case TS_END:
        !           935:                fprintf(stderr, "End of tape header");
        !           936:                break;
        !           937:        }
        !           938:        if (predict != blksread - 1)
        !           939:                fprintf(stderr, "; predicted %d blocks, got %d blocks",
        !           940:                        predict, blksread - 1);
        !           941:        fprintf(stderr, "\n");
        !           942: newcalc:
        !           943:        blks = 0;
        !           944:        if (header->c_type != TS_END)
        !           945:                for (i = 0; i < header->c_count; i++)
        !           946:                        if (header->c_addr[i] != 0)
        !           947:                                blks++;
        !           948:        predict = blks;
        !           949:        blksread = 0;
        !           950:        prevtype = header->c_type;
        !           951:        previno = header->c_inumber;
        !           952: }
        !           953: 
        !           954: /*
        !           955:  * Find an inode header.
        !           956:  * Complain if had to skip, and complain is set.
        !           957:  */
        !           958: findinode(header)
        !           959:        struct s_spcl *header;
        !           960: {
        !           961:        static long skipcnt = 0;
        !           962:        long i;
        !           963:        char buf[TP_BSIZE];
        !           964: 
        !           965:        curfile.name = "<name unknown>";
        !           966:        curfile.action = UNKNOWN;
        !           967:        curfile.dip = (struct dinode *)NIL;
        !           968:        curfile.ino = 0;
        !           969:        if (ishead(header) == FAIL) {
        !           970:                skipcnt++;
        !           971:                while (gethead(header) == FAIL || header->c_date != dumpdate)
        !           972:                        skipcnt++;
        !           973:        }
        !           974:        for (;;) {
        !           975:                if (checktype(header, TS_ADDR) == GOOD) {
        !           976:                        /*
        !           977:                         * Skip up to the beginning of the next record
        !           978:                         */
        !           979:                        for (i = 0; i < header->c_count; i++)
        !           980:                                if (header->c_addr[i])
        !           981:                                        readtape(buf);
        !           982:                        (void) gethead(header);
        !           983:                        continue;
        !           984:                }
        !           985:                if (checktype(header, TS_INODE) == GOOD) {
        !           986:                        curfile.dip = &header->c_dinode;
        !           987:                        curfile.ino = header->c_inumber;
        !           988:                        break;
        !           989:                }
        !           990:                if (checktype(header, TS_END) == GOOD) {
        !           991:                        curfile.ino = maxino;
        !           992:                        break;
        !           993:                }
        !           994:                if (checktype(header, TS_CLRI) == GOOD) {
        !           995:                        curfile.name = "<file removal list>";
        !           996:                        break;
        !           997:                }
        !           998:                if (checktype(header, TS_BITS) == GOOD) {
        !           999:                        curfile.name = "<file dump list>";
        !          1000:                        break;
        !          1001:                }
        !          1002:                while (gethead(header) == FAIL)
        !          1003:                        skipcnt++;
        !          1004:        }
        !          1005:        if (skipcnt > 0)
        !          1006:                fprintf(stderr, "resync restore, skipped %d blocks\n", skipcnt);
        !          1007:        skipcnt = 0;
        !          1008: }
        !          1009: 
        !          1010: /*
        !          1011:  * return whether or not the buffer contains a header block
        !          1012:  */
        !          1013: ishead(buf)
        !          1014:        struct s_spcl *buf;
        !          1015: {
        !          1016: 
        !          1017:        if (buf->c_magic != NFS_MAGIC)
        !          1018:                return(FAIL);
        !          1019:        return(GOOD);
        !          1020: }
        !          1021: 
        !          1022: checktype(b, t)
        !          1023:        struct s_spcl *b;
        !          1024:        int     t;
        !          1025: {
        !          1026: 
        !          1027:        if (b->c_type != t)
        !          1028:                return(FAIL);
        !          1029:        return(GOOD);
        !          1030: }
        !          1031: 
        !          1032: checksum(b)
        !          1033:        register int *b;
        !          1034: {
        !          1035:        register int i, j;
        !          1036: 
        !          1037:        j = sizeof(union u_spcl) / sizeof(int);
        !          1038:        i = 0;
        !          1039:        if(!Bcvt) {
        !          1040:                do
        !          1041:                        i += *b++;
        !          1042:                while (--j);
        !          1043:        } else {
        !          1044:                /* What happens if we want to read restore tapes
        !          1045:                        for a 16bit int machine??? */
        !          1046:                do 
        !          1047:                        i += swabl(*b++);
        !          1048:                while (--j);
        !          1049:        }
        !          1050:                        
        !          1051:        if (i != CHECKSUM) {
        !          1052:                fprintf(stderr, "Checksum error %o, inode %d file %s\n", i,
        !          1053:                        curfile.ino, curfile.name);
        !          1054:                return(FAIL);
        !          1055:        }
        !          1056:        return(GOOD);
        !          1057: }
        !          1058: 
        !          1059: #ifdef RRESTORE
        !          1060: /* VARARGS1 */
        !          1061: msg(cp, a1, a2, a3)
        !          1062:        char *cp;
        !          1063: {
        !          1064: 
        !          1065:        fprintf(stderr, cp, a1, a2, a3);
        !          1066: }
        !          1067: #endif RRESTORE
        !          1068: 
        !          1069: swabst(cp, sp)
        !          1070: register char *cp, *sp;
        !          1071: {
        !          1072:        int n = 0;
        !          1073:        char c;
        !          1074:        while(*cp) {
        !          1075:                switch (*cp) {
        !          1076:                case '0': case '1': case '2': case '3': case '4':
        !          1077:                case '5': case '6': case '7': case '8': case '9':
        !          1078:                        n = (n * 10) + (*cp++ - '0');
        !          1079:                        continue;
        !          1080:                
        !          1081:                case 's': case 'w': case 'h':
        !          1082:                        c = sp[0]; sp[0] = sp[1]; sp[1] = c;
        !          1083:                        sp++;
        !          1084:                        break;
        !          1085: 
        !          1086:                case 'l':
        !          1087:                        c = sp[0]; sp[0] = sp[3]; sp[3] = c;
        !          1088:                        c = sp[2]; sp[2] = sp[1]; sp[1] = c;
        !          1089:                        sp += 3;
        !          1090:                }
        !          1091:                sp++; /* Any other character, like 'b' counts as byte. */
        !          1092:                if (n <= 1) {
        !          1093:                        n = 0; cp++;
        !          1094:                } else
        !          1095:                        n--;
        !          1096:        }
        !          1097: }
        !          1098: swabl(x) { unsigned long l = x; swabst("l", (char *)&l); return l; }

unix.superglobalmegacorp.com

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.