Return to de.4 CVS log

Up to [CSRG BSD Unix] / 43BSDTahoe / man / man4 / vax

Annotation of 43BSDTahoe/man/man4/vax/de.4, revision 1.1

1.1     ! root        1: .\" Copyright (c) 1986 Regents of the University of California.
        !             2: .\" All rights reserved.  The Berkeley software License Agreement
        !             3: .\" specifies the terms and conditions for redistribution.
        !             4: .\"
        !             5: .\"    @(#)de.4        6.2 (Berkeley) 5/16/86
        !             6: .\"
        !             7: .TH DE 4 "May 16, 1986"
        !             8: .UC 5
        !             9: .SH NAME
        !            10: de \- DEC DEUNA 10 Mb/s Ethernet interface
        !            11: .SH SYNOPSIS
        !            12: .B "device de0 at uba0 csr 174510 vector deintr"
        !            13: .SH DESCRIPTION
        !            14: The
        !            15: .I de
        !            16: interface provides access to a 10 Mb/s Ethernet network through
        !            17: a Digital Equipment UNIBUS Network Adapter (DEUNA).
        !            18: .PP
        !            19: Each of the host's network addresses
        !            20: is specified at boot time with an SIOCSIFADDR
        !            21: ioctl.  The
        !            22: .I de
        !            23: interface employs the address resolution protocol described in
        !            24: .IR arp (4P)
        !            25: to dynamically map between Internet and Ethernet addresses on the local
        !            26: network.
        !            27: .PP
        !            28: The interface normally tries to use a ``trailer'' encapsulation
        !            29: to minimize copying data on input and output.
        !            30: The use of trailers is negotiated with ARP.
        !            31: This negotiation may be disabled, on a per-interface basis,
        !            32: by setting the IFF_NOTRAILERS
        !            33: flag with an SIOCSIFFLAGS ioctl.
        !            34: .SH DIAGNOSTICS
        !            35: \fBde%d: hardware address %s\fP.
        !            36: This is a normal autoconfiguration message noting the 6 byte physical
        !            37: ethernet address of the adapter.
        !            38: .PP
        !            39: \fBde%d: oerror, flags=%b tdrerr=%b (len=%d)\fP.
        !            40: The hardware indicated an error
        !            41: in transmitting a packet to the cable.
        !            42: The status and error flags are reported.
        !            43: .PP
        !            44: \fBde%d: ierror, flags=%b lenerr=%b (len=%d)\fP.
        !            45: The hardware indicated an error
        !            46: in reading a packet from the cable.
        !            47: The status and error flags are reported.
        !            48: .PP
        !            49: \fBde%d: can't handle af%d\fP.  The interface was handed
        !            50: a message with addresses formatted in an unsuitable address
        !            51: family; the packet was dropped.
        !            52: .PP
        !            53: \fBde%d: buffer unavailable\fP.  The interface received more packets
        !            54: than it had buffers allocated to receive them.
        !            55: .PP
        !            56: \fBde%d: address change failed, csr0=%b csr1=%b\fP.
        !            57: The interface was unable to reprogram
        !            58: its physical ethernet address.
        !            59: This may happen with very early models of the interface.
        !            60: This facility is used only when
        !            61: the controller is not the first network interface configured for XNS.
        !            62: .PP
        !            63: The following messages indicate a probable hardware error performing
        !            64: the indicated operation during autoconfiguration or initialization.
        !            65: The two control and status registers
        !            66: should indicate the nature of the failure.
        !            67: See the hardware manual for details.
        !            68: .PP
        !            69: \fBde%d: reset failed, csr0=%b csr1=%b\fP.
        !            70: .PP
        !            71: \fBde%d: ppcb failed, csr0=%b csr1=%b\fP.
        !            72: .PP
        !            73: \fBde%d: read addr failed, csr0=%b csr1=%b\fP.
        !            74: .PP
        !            75: \fBde%d: wtring failed, csr0=%b csr1=%b\fP.
        !            76: .PP
        !            77: \fBde%d: wtmode failed, csr0=%b csr1=%b\fP.
        !            78: .SH SEE ALSO
        !            79: intro(4N), inet(4F), arp(4P)

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.