|
|
1.1 ! root 1: .\" @(#)hdh.4 6.1 (Berkeley) 8/8/85 ! 2: .\" ! 3: .TH HDH 4 "August 8, 1985" ! 4: .UC 6 ! 5: .SH NAME ! 6: hdh \- ACC IF-11/HDH IMP interface ! 7: .SH SYNOPSIS ! 8: .B "pseudo-device imp" ! 9: .br ! 10: .B "device hdh0 at uba0 csr 166740 vector hdhintr" ! 11: .SH DESCRIPTION ! 12: The ! 13: .I hdh ! 14: device provides an HDLC Host (HDH) ! 15: interface to an IMP. It is normally used when participating ! 16: in the DARPA Internet. The controller itself is not accessible ! 17: to users, but instead provides the hardware support to the IMP ! 18: interface described in ! 19: .IR imp (4). ! 20: When configuring, the ! 21: .I imp ! 22: pseudo-device must also be included. ! 23: .SH DIAGNOSTICS ! 24: .BR "hdh%d: not alive" . ! 25: The initialization routine was entered even though the device ! 26: did not autoconfigure. This indicates a system problem. ! 27: .PP ! 28: .BR "hdh%d: cannot get chan %d uba resources" . ! 29: Insufficient UNIBUS resources existed to initialize the device. ! 30: This is likely to be a shortage of UNIBUS mapping registers. ! 31: .PP ! 32: .BR "hdh%d: LINE UP" . ! 33: This indicates that both the HDLC and HDH protocols have declared the ! 34: link to the IMP alive. ! 35: .PP ! 36: .BR "hdh%d: LINE DOWN" . ! 37: This indicates that the link to the IMP has died. ! 38: .PP ! 39: .BR "hdh%d: HOST SEQUENCE ERROR" ! 40: .br ! 41: .BR "hdh%d: IMP SEQUENCE ERROR" ! 42: .br ! 43: .BR "hdh%d: HOST DATA ERROR" ! 44: .br ! 45: .BR "hdh%d: TIMEOUT" ! 46: .br ! 47: These errors indicate that an HDH protocol error has been detected. ! 48: .PP ! 49: .BR "hdh%d: cannot get supervisor cmnd buffer" . ! 50: This error indicates that an ! 51: .I mbuf ! 52: could not be allocated to send a command to the IF-11/HDH. ! 53: .PP ! 54: Any other error message from hdh%d: indicates a serious error ! 55: detected by either the driver or the IF-11/HDH firmware.
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.