|
|
1.1 ! root 1: .\" Copyright (c) 1983 Regents of the University of California. ! 2: .\" All rights reserved. The Berkeley software License Agreement ! 3: .\" specifies the terms and conditions for redistribution. ! 4: .\" ! 5: .\" @(#)ut.4 6.1 (Berkeley) 5/15/85 ! 6: .\" ! 7: .TH UT 4 "May 15, 1985" ! 8: .UC 5 ! 9: .SH NAME ! 10: ut \- UNIBUS TU45 tri-density tape drive interface ! 11: .SH SYNOPSIS ! 12: .B "controller ut0 at uba0 csr 0172440 vector utintr" ! 13: .br ! 14: .B "tape tj0 at ut0 drive 0" ! 15: .SH DESCRIPTION ! 16: The ! 17: .I ut ! 18: interface provides access to a standard tape drive interface as ! 19: describe in ! 20: .IR mtio (4). ! 21: Hardware implementing this on the VAX is typified by the System ! 22: Industries SI 9700 tape subsystem. Tapes may be read or written ! 23: at 800, 1600, and 6250 bpi. ! 24: .SH "SEE ALSO" ! 25: mt(1), ! 26: mtio(4) ! 27: .SH DIAGNOSTICS ! 28: .BR "tj%d: no write ring" . ! 29: An attempt was made to write on the tape drive ! 30: when no write ring was present; this message is written on the terminal of ! 31: the user who tried to access the tape. ! 32: .PP ! 33: .BR "tj%d: not online" . ! 34: An attempt was made to access the tape while it ! 35: was offline; this message is written on the terminal of the user ! 36: who tried to access the tape. ! 37: .PP ! 38: .BR "tj%d: can't change density in mid-tape" . ! 39: An attempt was made to write ! 40: on a tape at a different density than is already recorded on the tape. ! 41: This message is written on the terminal of the user who tried to switch ! 42: the density. ! 43: .PP ! 44: .BR "ut%d: soft error bn%d cs1=%b er=%b cs2=%b ds=%b" . ! 45: The formatter indicated a corrected error at a density other ! 46: than 800bpi. The data transferred is assumed to be correct. ! 47: .PP ! 48: .BR "ut%d: hard error bn%d cs1=%b er=%b cs2=%b ds=%b" . ! 49: A tape error occurred ! 50: at block ! 51: .IR bn . ! 52: Any error is ! 53: fatal on non-raw tape; when possible the driver will have retried ! 54: the operation which failed several times before reporting the error. ! 55: .PP ! 56: .BR "tj%d: lost interrupt" . ! 57: A tape operation did not complete ! 58: within a reasonable time, most likely because the tape was taken ! 59: off-line during rewind or lost vacuum. The controller should, but does not, ! 60: give an interrupt in these cases. The device will be made available ! 61: again after this message, but any current open reference to the device ! 62: will return an error as the operation in progress aborts. ! 63: .SH BUGS ! 64: If any non-data error is encountered on non-raw tape, it refuses to do anything ! 65: more until closed.
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.