|
|
1.1 ! root 1: /* ! 2: * Copyright (c) 1982, 1986 Regents of the University of California. ! 3: * All rights reserved. ! 4: * ! 5: * Redistribution and use in source and binary forms are permitted ! 6: * provided that the above copyright notice and this paragraph are ! 7: * duplicated in all such forms and that any documentation, ! 8: * advertising materials, and other materials related to such ! 9: * distribution and use acknowledge that the software was developed ! 10: * by the University of California, Berkeley. The name of the ! 11: * University may not be used to endorse or promote products derived ! 12: * from this software without specific prior written permission. ! 13: * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ! 14: * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ! 15: * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ! 16: * ! 17: * @(#)tcp_timer.h 7.6 (Berkeley) 6/29/88 ! 18: */ ! 19: ! 20: /* ! 21: * Definitions of the TCP timers. These timers are counted ! 22: * down PR_SLOWHZ times a second. ! 23: */ ! 24: #define TCPT_NTIMERS 4 ! 25: ! 26: #define TCPT_REXMT 0 /* retransmit */ ! 27: #define TCPT_PERSIST 1 /* retransmit persistance */ ! 28: #define TCPT_KEEP 2 /* keep alive */ ! 29: #define TCPT_2MSL 3 /* 2*msl quiet time timer */ ! 30: ! 31: /* ! 32: * The TCPT_REXMT timer is used to force retransmissions. ! 33: * The TCP has the TCPT_REXMT timer set whenever segments ! 34: * have been sent for which ACKs are expected but not yet ! 35: * received. If an ACK is received which advances tp->snd_una, ! 36: * then the retransmit timer is cleared (if there are no more ! 37: * outstanding segments) or reset to the base value (if there ! 38: * are more ACKs expected). Whenever the retransmit timer goes off, ! 39: * we retransmit one unacknowledged segment, and do a backoff ! 40: * on the retransmit timer. ! 41: * ! 42: * The TCPT_PERSIST timer is used to keep window size information ! 43: * flowing even if the window goes shut. If all previous transmissions ! 44: * have been acknowledged (so that there are no retransmissions in progress), ! 45: * and the window is too small to bother sending anything, then we start ! 46: * the TCPT_PERSIST timer. When it expires, if the window is nonzero, ! 47: * we go to transmit state. Otherwise, at intervals send a single byte ! 48: * into the peer's window to force him to update our window information. ! 49: * We do this at most as often as TCPT_PERSMIN time intervals, ! 50: * but no more frequently than the current estimate of round-trip ! 51: * packet time. The TCPT_PERSIST timer is cleared whenever we receive ! 52: * a window update from the peer. ! 53: * ! 54: * The TCPT_KEEP timer is used to keep connections alive. If an ! 55: * connection is idle (no segments received) for TCPTV_KEEP_INIT amount of time, ! 56: * but not yet established, then we drop the connection. Once the connection ! 57: * is established, if the connection is idle for TCPTV_KEEP_IDLE time ! 58: * (and keepalives have been enabled on the socket), we begin to probe ! 59: * the connection. We force the peer to send us a segment by sending: ! 60: * <SEQ=SND.UNA-1><ACK=RCV.NXT><CTL=ACK> ! 61: * This segment is (deliberately) outside the window, and should elicit ! 62: * an ack segment in response from the peer. If, despite the TCPT_KEEP ! 63: * initiated segments we cannot elicit a response from a peer in TCPT_MAXIDLE ! 64: * amount of time probing, then we drop the connection. ! 65: */ ! 66: ! 67: #define TCP_TTL 30 /* default time to live for TCP segs */ ! 68: /* ! 69: * Time constants. ! 70: */ ! 71: #define TCPTV_MSL ( 30*PR_SLOWHZ) /* max seg lifetime (hah!) */ ! 72: #define TCPTV_SRTTBASE 0 /* base roundtrip time; ! 73: if 0, no idea yet */ ! 74: #define TCPTV_SRTTDFLT ( 3*PR_SLOWHZ) /* assumed RTT if no info */ ! 75: ! 76: #define TCPTV_PERSMIN ( 5*PR_SLOWHZ) /* retransmit persistance */ ! 77: #define TCPTV_PERSMAX ( 60*PR_SLOWHZ) /* maximum persist interval */ ! 78: ! 79: #define TCPTV_KEEP_INIT ( 75*PR_SLOWHZ) /* initial connect keep alive */ ! 80: #define TCPTV_KEEP_IDLE (120*60*PR_SLOWHZ) /* dflt time before probing */ ! 81: #define TCPTV_KEEPINTVL ( 75*PR_SLOWHZ) /* default probe interval */ ! 82: #define TCPTV_KEEPCNT 8 /* max probes before drop */ ! 83: ! 84: #define TCPTV_MIN ( 1*PR_SLOWHZ) /* minimum allowable value */ ! 85: #define TCPTV_REXMTMAX ( 64*PR_SLOWHZ) /* max allowable REXMT value */ ! 86: ! 87: #define TCP_LINGERTIME 120 /* linger at most 2 minutes */ ! 88: ! 89: #define TCP_MAXRXTSHIFT 12 /* maximum retransmits */ ! 90: ! 91: #ifdef TCPTIMERS ! 92: char *tcptimers[] = ! 93: { "REXMT", "PERSIST", "KEEP", "2MSL" }; ! 94: #endif ! 95: ! 96: /* ! 97: * Force a time value to be in a certain range. ! 98: */ ! 99: #define TCPT_RANGESET(tv, value, tvmin, tvmax) { \ ! 100: (tv) = (value); \ ! 101: if ((tv) < (tvmin)) \ ! 102: (tv) = (tvmin); \ ! 103: else if ((tv) > (tvmax)) \ ! 104: (tv) = (tvmax); \ ! 105: } ! 106: ! 107: #ifdef KERNEL ! 108: extern int tcp_keepidle; /* time before keepalive probes begin */ ! 109: extern int tcp_keepintvl; /* time between keepalive probes */ ! 110: extern int tcp_maxidle; /* time to drop after starting probes */ ! 111: extern int tcp_ttl; /* time to live for TCP segs */ ! 112: extern int tcp_backoff[]; ! 113: #endif
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.