Return to Info.rtf CVS log

Up to [NeXTSTEP 3.3 examples] / Examples / DriverKit / SoundBlaster8 / English.lproj

Annotation of Examples/DriverKit/SoundBlaster8/English.lproj/Info.rtf, revision 1.1.1.1

1.1       root        1: {\rtf0\ansi{\fonttbl\f0\fmodern Courier;\f1\fswiss Helvetica;}
                      2: \paperw7840
                      3: \paperh7060
                      4: \margl120
                      5: \margr120
                      6: \pard\tx520\tx1060\tx1600\tx2120\tx2660\tx3200\tx3720\tx4260\tx4800\tx5320\f0\b\i0\ulnone\qc\fs36\fc0\cf0 SoundBlaster8 Audio Driver\
                      7: 
                      8: \f1\b0 \
                      9: 
                     10: \f0\ql\fs24 This driver is for 8-bit Sound Blaster compatible series cards. It will work with Sound Blaster Classic, Sound Blaster 2.0 and Sound Blaster Pro cards. \
                     11: \
                     12: The range of sampling rates is limited by hardware capabilities of these cards. However some clone cards may not be able support higher rates.\
                     13: 
                     14: \f1\fs28 \
                     15: 
                     16: \f0              
                     17: \b\fs24 Playback            Recording
                     18: \b0\fs28 \
                     19: 
                     20: \b\fs24 Classic
                     21: \b0\fs28        
                     22: \fs24 4-23
                     23: \fs28  
                     24: \fs24 KHz             4-13 KHz
                     25: \fs28 \
                     26: 
                     27: \b\fs24 2.0
                     28: \b0\fs28           
                     29: \fs24 4-44.1 KHz           4-15 KHz
                     30: \fs28 \
                     31: 
                     32: \b\fs24 Pro
                     33: \b0\fs28           
                     34: \fs24 4-44.1 KHz           4-44.1 KHz
                     35: \fs28 \
                     36: 
                     37: \f1   \
                     38: 
                     39: \f0\fs24 Also note that the Pro card can playback in stereo but only upto 22KHz. \
                     40: 
                     41: \f1\fs28  \
                     42: 
                     43: \f0\fs24 Playback of compressed sound files is not supported.\
                     44: \
                     45: You should make sure that DMA/IRQ/Port Address selected using Configure is same as the one defined by the jumpers on the sound card. Refer to the hardware documentation for available jumpers and how to set them.\
                     46: 
                     47: }

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.