Return to Info.rtf CVS log

Up to [NeXTSTEP 3.3 examples] / Examples / DriverKit / SoundBlaster8 / English.lproj

Sample Programs from NeXSTEP 3.3

{\rtf0\ansi{\fonttbl\f0\fmodern Courier;\f1\fswiss Helvetica;}
\paperw7840
\paperh7060
\margl120
\margr120
\pard\tx520\tx1060\tx1600\tx2120\tx2660\tx3200\tx3720\tx4260\tx4800\tx5320\f0\b\i0\ulnone\qc\fs36\fc0\cf0 SoundBlaster8 Audio Driver\

\f1\b0 \

\f0\ql\fs24 This driver is for 8-bit Sound Blaster compatible series cards. It will work with Sound Blaster Classic, Sound Blaster 2.0 and Sound Blaster Pro cards. \
\
The range of sampling rates is limited by hardware capabilities of these cards. However some clone cards may not be able support higher rates.\

\f1\fs28 \

\f0              
\b\fs24 Playback            Recording
\b0\fs28 \

\b\fs24 Classic
\b0\fs28        
\fs24 4-23
\fs28  
\fs24 KHz             4-13 KHz
\fs28 \

\b\fs24 2.0
\b0\fs28           
\fs24 4-44.1 KHz           4-15 KHz
\fs28 \

\b\fs24 Pro
\b0\fs28           
\fs24 4-44.1 KHz           4-44.1 KHz
\fs28 \

\f1   \

\f0\fs24 Also note that the Pro card can playback in stereo but only upto 22KHz. \

\f1\fs28  \

\f0\fs24 Playback of compressed sound files is not supported.\
\
You should make sure that DMA/IRQ/Port Address selected using Configure is same as the one defined by the jumpers on the sound card. Refer to the hardware documentation for available jumpers and how to set them.\

}

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.