|
|
1.1.1.2 ! root 1: /* 1.1 root 2: * Mach Operating System 3: * Copyright (c) 1991,1990,1989 Carnegie Mellon University 4: * All Rights Reserved. 1.1.1.2 ! root 5: * 1.1 root 6: * Permission to use, copy, modify and distribute this software and its 7: * documentation is hereby granted, provided that both the copyright 8: * notice and this permission notice appear in all copies of the 9: * software, derivative works or modified versions, and any portions 10: * thereof, and that both notices appear in supporting documentation. 1.1.1.2 ! root 11: * 1.1 root 12: * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" 13: * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR 14: * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. 1.1.1.2 ! root 15: * 1.1 root 16: * Carnegie Mellon requests users of this software to return to 1.1.1.2 ! root 17: * 1.1 root 18: * Software Distribution Coordinator or [email protected] 19: * School of Computer Science 20: * Carnegie Mellon University 21: * Pittsburgh PA 15213-3890 1.1.1.2 ! root 22: * 1.1 root 23: * any improvements or extensions that they make and grant Carnegie Mellon 24: * the rights to redistribute these changes. 25: */ 26: /* 27: * Author: David B. Golub, Carnegie Mellon University 28: * Date: 3/89 29: * 30: * Status information for network interfaces. 31: */ 32: 33: #ifndef _DEVICE_NET_STATUS_H_ 34: #define _DEVICE_NET_STATUS_H_ 35: 36: #include <device/device_types.h> 37: #include <mach/message.h> 38: 39: /* 40: * General interface status 41: */ 42: struct net_status { 43: int min_packet_size; /* minimum size, including header */ 44: int max_packet_size; /* maximum size, including header */ 45: int header_format; /* format of network header */ 46: int header_size; /* size of network header */ 47: int address_size; /* size of network address */ 48: int flags; /* interface status */ 49: int mapped_size; /* if mappable, virtual mem needed */ 50: }; 51: #define NET_STATUS_COUNT (sizeof(struct net_status)/sizeof(int)) 52: #define NET_STATUS (('n'<<16) + 1) 53: 54: /* 55: * Header formats, as given by RFC 826/1010 for ARP: 56: */ 57: #define HDR_ETHERNET 1 /* Ethernet hardware address */ 58: #define HDR_EXP_ETHERNET 2 /* 3Mhz experimental Ethernet 59: hardware address */ 60: #define HDR_PRO_NET 4 /* Proteon ProNET Token Ring */ 61: #define HDR_CHAOS 5 /* Chaosnet */ 62: #define HDR_802 6 /* IEEE 802 networks */ 63: 64: 65: /* 66: * A network address is an array of bytes. In order to return 67: * this in an array of (long) integers, it is returned in net order. 68: * Use 'ntohl' on each element of the array to retrieve the original 69: * ordering. 70: */ 71: #define NET_ADDRESS (('n'<<16) + 2) 72: 73: #define NET_DSTADDR (('n'<<16) + 3) 74: 75: 76: /* 77: * Input packet filter definition 78: */ 79: #define NET_MAX_FILTER 128 /* was 64, bpf programs are big */ 80: #define NET_FILTER_STACK_DEPTH 32 81: 82: /* 83: * We allow specification of up to NET_MAX_FILTER (short) words of a filter 84: * command list to be applied to incoming packets to determine if 85: * those packets should be given to a particular network input filter. 1.1.1.2 ! root 86: * 1.1 root 87: * Each network filter specifies the filter command list via net_add_filter. 88: * Each filter command list specifies a sequences of actions which leave a 89: * boolean value on the top of an internal stack. Each word of the 90: * command list specifies an action from the set {PUSHLIT, PUSHZERO, 91: * PUSHWORD+N} which respectively push the next word of the filter, zero, 92: * or word N of the incoming packet on the stack, and a binary operator 93: * from the set {EQ, LT, LE, GT, GE, AND, OR, XOR} which operates on the 94: * top two elements of the stack and replaces them with its result. The 95: * special action NOPUSH and the special operator NOP can be used to only 96: * perform the binary operation or to only push a value on the stack. 1.1.1.2 ! root 97: * 1.1 root 98: * If the final value of the filter operation is true, then the packet is 99: * accepted for the filter. 1.1.1.2 ! root 100: * 1.1 root 101: */ 102: 103: typedef unsigned short filter_t; 104: typedef filter_t *filter_array_t; 105: 106: #define CSPF_BYTES(n) ((n) * sizeof (filter_t)) 107: 108: /* these must sum to 16! */ 109: #define NETF_NBPA 10 /* # bits / argument */ 110: #define NETF_NBPO 6 /* # bits / operator */ 111: 112: #define NETF_ARG(word) ((word) & 0x3ff) 113: #define NETF_OP(word) (((word)>>NETF_NBPA)&0x3f) 114: 115: /* binary operators */ 116: #define NETF_NOP (0<<NETF_NBPA) 117: #define NETF_EQ (1<<NETF_NBPA) 118: #define NETF_LT (2<<NETF_NBPA) 119: #define NETF_LE (3<<NETF_NBPA) 120: #define NETF_GT (4<<NETF_NBPA) 121: #define NETF_GE (5<<NETF_NBPA) 122: #define NETF_AND (6<<NETF_NBPA) 123: #define NETF_OR (7<<NETF_NBPA) 124: #define NETF_XOR (8<<NETF_NBPA) 125: #define NETF_COR (9<<NETF_NBPA) 126: #define NETF_CAND (10<<NETF_NBPA) 127: #define NETF_CNOR (11<<NETF_NBPA) 128: #define NETF_CNAND (12<<NETF_NBPA) 129: #define NETF_NEQ (13<<NETF_NBPA) 130: #define NETF_LSH (14<<NETF_NBPA) 131: #define NETF_RSH (15<<NETF_NBPA) 132: #define NETF_ADD (16<<NETF_NBPA) 133: #define NETF_SUB (17<<NETF_NBPA) 134: #define NETF_BPF (((1 << NETF_NBPO) - 1) << NETF_NBPA) 135: 136: 137: /* stack arguments */ 138: #define NETF_NOPUSH 0 /* don`t push */ 139: #define NETF_PUSHLIT 1 /* next word in filter */ 140: #define NETF_PUSHZERO 2 /* 0 */ 141: #define NETF_PUSHIND 14 /* word indexed by stack top */ 142: #define NETF_PUSHHDRIND 15 /* header word indexed by stack top */ 143: #define NETF_PUSHWORD 16 /* word 0 .. 944 in packet */ 144: #define NETF_PUSHHDR 960 /* word 0 .. 31 in header */ 145: #define NETF_PUSHSTK 992 /* word 0 .. 31 in stack */ 146: 147: /* priorities */ 148: #define NET_HI_PRI 100 149: #define NET_PRI_MAX 255 150: 151: /* 152: * BPF support. 153: */ 154: #include <device/bpf.h> 155: 156: /* 157: * Net receive message format. 158: * 159: * The header and data are packaged separately, since some hardware 160: * supports variable-length headers. We prefix the packet with 161: * a packet_hdr structure so that the real data portion begins 162: * on a long-word boundary, and so that packet filters can address 163: * the type field and packet size uniformly. 164: */ 165: #define NET_RCV_MAX 4095 166: #define NET_HDW_HDR_MAX 64 167: 168: #define NET_RCV_MSG_ID 2999 /* in device.defs reply range */ 169: 170: struct packet_header { 171: unsigned short length; 172: unsigned short type; /* network order */ 173: }; 174: 175: struct net_rcv_msg { 176: mach_msg_header_t msg_hdr; 177: mach_msg_type_t header_type; 178: char header[NET_HDW_HDR_MAX]; 179: mach_msg_type_t packet_type; 180: char packet[NET_RCV_MAX]; 181: }; 182: typedef struct net_rcv_msg *net_rcv_msg_t; 183: #define net_rcv_msg_packet_count packet_type.msgt_number 184: 185: 186: 1.1.1.2 ! root 187: #endif /* _DEVICE_NET_STATUS_H_ */
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.