Return to sk_g16.c CVS log

Up to [GnuMach] / Gnu-Mach / linux / src / drivers / net

Annotation of Gnu-Mach/linux/src/drivers/net/sk_g16.c, revision 1.1

1.1     ! root        1: /*-
        !             2:  * Copyright (C) 1994 by PJD Weichmann & SWS Bern, Switzerland
        !             3:  *
        !             4:  * This software may be used and distributed according to the terms
        !             5:  * of the GNU Public License, incorporated herein by reference.
        !             6:  *
        !             7:  * Module         : sk_g16.c
        !             8:  *
        !             9:  * Version        : $Revision: 1.1 $
        !            10:  *
        !            11:  * Author         : Patrick J.D. Weichmann
        !            12:  *
        !            13:  * Date Created   : 94/05/26
        !            14:  * Last Updated   : $Date: 1999/04/26 05:52:37 $
        !            15:  *
        !            16:  * Description    : Schneider & Koch G16 Ethernet Device Driver for
        !            17:  *                  Linux Kernel >= 1.1.22
        !            18:  * Update History :
        !            19:  *
        !            20: -*/
        !            21: 
        !            22: static const char *rcsid = "$Id: sk_g16.c,v 1.1 1999/04/26 05:52:37 tb Exp $";
        !            23: 
        !            24: /*
        !            25:  * The Schneider & Koch (SK) G16 Network device driver is based
        !            26:  * on the 'ni6510' driver from Michael Hipp which can be found at
        !            27:  * ftp://sunsite.unc.edu/pub/Linux/system/Network/drivers/nidrivers.tar.gz
        !            28:  * 
        !            29:  * Sources: 1) ni6510.c by M. Hipp
        !            30:  *          2) depca.c  by D.C. Davies
        !            31:  *          3) skeleton.c by D. Becker
        !            32:  *          4) Am7990 Local Area Network Controller for Ethernet (LANCE),
        !            33:  *             AMD, Pub. #05698, June 1989
        !            34:  *
        !            35:  * Many Thanks for helping me to get things working to: 
        !            36:  *                 
        !            37:  *                 A. Cox ([email protected])
        !            38:  *                 M. Hipp ([email protected])
        !            39:  *                 R. Bolz (Schneider & Koch, Germany)
        !            40:  *
        !            41:  * See README.sk_g16 for details about limitations and bugs for the
        !            42:  * current version.
        !            43:  *
        !            44:  * To Do: 
        !            45:  *        - Support of SK_G8 and other SK Network Cards.
        !            46:  *        - Autoset memory mapped RAM. Check for free memory and then
        !            47:  *          configure RAM correctly. 
        !            48:  *        - SK_close should really set card in to initial state.
        !            49:  *        - Test if IRQ 3 is not switched off. Use autoirq() functionality.
        !            50:  *          (as in /drivers/net/skeleton.c)
        !            51:  *        - Implement Multicast addressing. At minimum something like
        !            52:  *          in depca.c. 
        !            53:  *        - Redo the statistics part.
        !            54:  *        - Try to find out if the board is in 8 Bit or 16 Bit slot.
        !            55:  *          If in 8 Bit mode don't use IRQ 11.
        !            56:  *        - (Try to make it slightly faster.) 
        !            57:  */
        !            58: 
        !            59: #include <linux/kernel.h>
        !            60: #include <linux/sched.h>
        !            61: #include <linux/ptrace.h>
        !            62: #include <linux/fcntl.h>
        !            63: #include <linux/ioport.h>
        !            64: #include <linux/interrupt.h>
        !            65: #include <linux/malloc.h>
        !            66: #include <linux/string.h> 
        !            67: #include <asm/system.h>
        !            68: #include <asm/io.h>
        !            69: #include <asm/bitops.h> 
        !            70: #include <linux/errno.h>
        !            71: 
        !            72: #include <linux/netdevice.h>
        !            73: #include <linux/etherdevice.h>
        !            74: #include <linux/skbuff.h>
        !            75: 
        !            76: #include "sk_g16.h"
        !            77: 
        !            78: /* 
        !            79:  * Schneider & Koch Card Definitions 
        !            80:  * =================================
        !            81:  */  
        !            82: 
        !            83: #define SK_NAME   "SK_G16"
        !            84: 
        !            85: /*
        !            86:  * SK_G16 Configuration
        !            87:  * --------------------
        !            88:  */ 
        !            89: 
        !            90: /* 
        !            91:  * Abbreviations
        !            92:  * -------------
        !            93:  *  
        !            94:  * RAM - used for the 16KB shared memory 
        !            95:  * Boot_ROM, ROM - are used for referencing the BootEPROM
        !            96:  *
        !            97:  * SK_BOOT_ROM and SK_ADDR are symbolic constants used to configure
        !            98:  * the behaviour of the driver and the SK_G16.
        !            99:  *
        !           100:  * ! See sk_g16.install on how to install and configure the driver !   
        !           101:  *
        !           102:  * SK_BOOT_ROM defines if the Boot_ROM should be switched off or not.
        !           103:  *
        !           104:  * SK_ADDR defines the address where the RAM will be mapped into the real
        !           105:  *         host memory.
        !           106:  *         valid addresses are from 0xa0000 to 0xfc000 in 16Kbyte steps.
        !           107:  */  
        !           108:  
        !           109: #define SK_BOOT_ROM     1              /* 1=BootROM on 0=off */
        !           110: 
        !           111: #define SK_ADDR         0xcc000
        !           112: 
        !           113: /* 
        !           114:  * In POS3 are bits A14-A19 of the address bus. These bits can be set
        !           115:  * to choose the RAM address. That's why we only can choose the RAM address
        !           116:  * in 16KB steps.
        !           117:  */
        !           118: 
        !           119: #define POS_ADDR       (rom_addr>>14)  /* Do not change this line */
        !           120: 
        !           121: /* 
        !           122:  * SK_G16 I/O PORT's + IRQ's + Boot_ROM locations
        !           123:  * ----------------------------------------------
        !           124:  */
        !           125: 
        !           126: /* 
        !           127:  * As nearly every card has also SK_G16 a specified I/O Port region and
        !           128:  * only a few possible IRQ's.
        !           129:  * In the Installation Guide from Schneider & Koch is listed a possible
        !           130:  * Interrupt IRQ2. IRQ2 is always IRQ9 in boards with two cascaded interrupt
        !           131:  * controllers. So we use in SK_IRQS IRQ9.
        !           132:  */
        !           133: 
        !           134: /* Don't touch any of the following #defines. */
        !           135: 
        !           136: #define SK_IO_PORTS     { 0x100, 0x180, 0x208, 0x220, 0x288, 0x320, 0x328, 0x390, 0 }
        !           137: 
        !           138: #define SK_IRQS         { 3, 5, 9, 11, 0 }
        !           139: 
        !           140: #define SK_BOOT_ROM_LOCATIONS { 0xc0000, 0xc4000, 0xc8000, 0xcc000, 0xd0000, 0xd4000, 0xd8000, 0xdc000, 0 }
        !           141: 
        !           142: #define SK_BOOT_ROM_ID  { 0x55, 0xaa, 0x10, 0x50, 0x06, 0x33 }
        !           143: 
        !           144: /* 
        !           145:  * SK_G16 POS REGISTERS 
        !           146:  * --------------------
        !           147:  */
        !           148: 
        !           149: /*
        !           150:  * SK_G16 has a Programmable Option Select (POS) Register.
        !           151:  * The POS is composed of 8 separate registers (POS0-7) which 
        !           152:  * are I/O mapped on an address set by the W1 switch.                    
        !           153:  *
        !           154:  */
        !           155: 
        !           156: #define SK_POS_SIZE 8           /* 8 I/O Ports are used by SK_G16 */
        !           157: 
        !           158: #define SK_POS0     ioaddr      /* Card-ID Low (R) */
        !           159: #define SK_POS1     ioaddr+1    /* Card-ID High (R) */
        !           160: #define SK_POS2     ioaddr+2    /* Card-Enable, Boot-ROM Disable (RW) */
        !           161: #define SK_POS3     ioaddr+3    /* Base address of RAM */
        !           162: #define SK_POS4     ioaddr+4    /* IRQ */
        !           163: 
        !           164: /* POS5 - POS7 are unused */
        !           165: 
        !           166: /* 
        !           167:  * SK_G16 MAC PREFIX 
        !           168:  * -----------------
        !           169:  */
        !           170: 
        !           171: /* 
        !           172:  * Scheider & Koch manufacturer code (00:00:a5).
        !           173:  * This must be checked, that we are sure it is a SK card.
        !           174:  */
        !           175: 
        !           176: #define SK_MAC0         0x00
        !           177: #define SK_MAC1         0x00
        !           178: #define SK_MAC2         0x5a
        !           179: 
        !           180: /* 
        !           181:  * SK_G16 ID 
        !           182:  * ---------
        !           183:  */ 
        !           184: 
        !           185: /* 
        !           186:  * If POS0,POS1 contain the following ID, then we know
        !           187:  * at which I/O Port Address we are. 
        !           188:  */
        !           189: 
        !           190: #define SK_IDLOW  0xfd 
        !           191: #define SK_IDHIGH 0x6a
        !           192: 
        !           193: 
        !           194: /* 
        !           195:  * LANCE POS Bit definitions 
        !           196:  * -------------------------
        !           197:  */
        !           198: 
        !           199: #define SK_ROM_RAM_ON  (POS2_CARD)
        !           200: #define SK_ROM_RAM_OFF (POS2_EPROM)
        !           201: #define SK_ROM_ON      (inb(SK_POS2) & POS2_CARD)
        !           202: #define SK_ROM_OFF     (inb(SK_POS2) | POS2_EPROM)
        !           203: #define SK_RAM_ON      (inb(SK_POS2) | POS2_CARD)
        !           204: #define SK_RAM_OFF     (inb(SK_POS2) & POS2_EPROM) 
        !           205: 
        !           206: #define POS2_CARD  0x0001              /* 1 = SK_G16 on      0 = off */
        !           207: #define POS2_EPROM 0x0002              /* 1 = Boot EPROM off 0 = on */ 
        !           208: 
        !           209: /* 
        !           210:  * SK_G16 Memory mapped Registers
        !           211:  * ------------------------------
        !           212:  *
        !           213:  */ 
        !           214: 
        !           215: #define SK_IOREG        (board->ioreg) /* LANCE data registers.     */ 
        !           216: #define SK_PORT         (board->port)  /* Control, Status register  */
        !           217: #define SK_IOCOM        (board->iocom) /* I/O Command               */
        !           218: 
        !           219: /* 
        !           220:  * SK_G16 Status/Control Register bits
        !           221:  * -----------------------------------
        !           222:  *
        !           223:  * (C) Controlreg (S) Statusreg 
        !           224:  */
        !           225: 
        !           226: /* 
        !           227:  * Register transfer: 0 = no transfer
        !           228:  *                    1 = transferring data between LANCE and I/O reg 
        !           229:  */
        !           230: #define SK_IORUN        0x20   
        !           231: 
        !           232: /* 
        !           233:  * LANCE interrupt: 0 = LANCE interrupt occurred       
        !           234:  *                  1 = no LANCE interrupt occurred
        !           235:  */
        !           236: #define SK_IRQ          0x10   
        !           237:                        
        !           238: #define SK_RESET        0x08   /* Reset SK_CARD: 0 = RESET 1 = normal */
        !           239: #define SK_RW           0x02   /* 0 = write to 1 = read from */
        !           240: #define SK_ADR          0x01   /* 0 = REG DataPort 1 = RAP Reg addr port */
        !           241: 
        !           242:   
        !           243: #define SK_RREG         SK_RW  /* Transferdirection to read from lance */
        !           244: #define SK_WREG         0      /* Transferdirection to write to lance */
        !           245: #define SK_RAP          SK_ADR /* Destination Register RAP */
        !           246: #define SK_RDATA        0      /* Destination Register REG DataPort */
        !           247: 
        !           248: /* 
        !           249:  * SK_G16 I/O Command 
        !           250:  * ------------------
        !           251:  */
        !           252: 
        !           253: /* 
        !           254:  * Any bitcombination sets the internal I/O bit (transfer will start) 
        !           255:  * when written to I/O Command
        !           256:  */
        !           257: 
        !           258: #define SK_DOIO         0x80   /* Do Transfer */ 
        !           259:  
        !           260: /* 
        !           261:  * LANCE RAP (Register Address Port). 
        !           262:  * ---------------------------------
        !           263:  */
        !           264: 
        !           265: /*   
        !           266:  * The LANCE internal registers are selected through the RAP. 
        !           267:  * The Registers are:
        !           268:  *
        !           269:  * CSR0 - Status and Control flags 
        !           270:  * CSR1 - Low order bits of initialize block (bits 15:00)
        !           271:  * CSR2 - High order bits of initialize block (bits 07:00, 15:08 are reserved)
        !           272:  * CSR3 - Allows redefinition of the Bus Master Interface.
        !           273:  *        This register must be set to 0x0002, which means BSWAP = 0,
        !           274:  *        ACON = 1, BCON = 0;
        !           275:  *
        !           276:  */
        !           277:  
        !           278: #define CSR0            0x00   
        !           279: #define CSR1            0x01  
        !           280: #define CSR2            0x02 
        !           281: #define CSR3            0x03
        !           282: 
        !           283: /* 
        !           284:  * General Definitions 
        !           285:  * ===================
        !           286:  */
        !           287: 
        !           288: /* 
        !           289:  * Set the number of Tx and Rx buffers, using Log_2(# buffers).
        !           290:  * We have 16KB RAM which can be accessed by the LANCE. In the 
        !           291:  * memory are not only the buffers but also the ring descriptors and
        !           292:  * the initialize block. 
        !           293:  * Don't change anything unless you really know what you do.
        !           294:  */
        !           295: 
        !           296: #define LC_LOG_TX_BUFFERS 1               /* (2 == 2^^1) 2 Transmit buffers */
        !           297: #define LC_LOG_RX_BUFFERS 3               /* (8 == 2^^3) 8 Receive buffers */
        !           298: 
        !           299: /* Descriptor ring sizes */
        !           300: 
        !           301: #define TMDNUM (1 << (LC_LOG_TX_BUFFERS)) /* 2 Transmit descriptor rings */
        !           302: #define RMDNUM (1 << (LC_LOG_RX_BUFFERS)) /* 8 Receive Buffers */
        !           303: 
        !           304: /* Define Mask for setting RMD, TMD length in the LANCE init_block */
        !           305: 
        !           306: #define TMDNUMMASK (LC_LOG_TX_BUFFERS << 29)
        !           307: #define RMDNUMMASK (LC_LOG_RX_BUFFERS << 29)
        !           308: 
        !           309: /*
        !           310:  * Data Buffer size is set to maximum packet length.
        !           311:  */
        !           312: 
        !           313: #define PKT_BUF_SZ              1518 
        !           314: 
        !           315: /* 
        !           316:  * The number of low I/O ports used by the ethercard. 
        !           317:  */
        !           318: 
        !           319: #define ETHERCARD_TOTAL_SIZE    SK_POS_SIZE
        !           320: 
        !           321: /* 
        !           322:  * Portreserve is there to mark the Card I/O Port region as used. 
        !           323:  * Check_region is to check if the region at ioaddr with the size "size" 
        !           324:  * is free or not.
        !           325:  * Snarf_region allocates the I/O Port region.
        !           326:  */
        !           327: 
        !           328: #ifndef HAVE_PORTRESERVE
        !           329: 
        !           330: #define check_region(ioaddr, size)              0
        !           331: #define request_region(ioaddr, size,name)       do ; while (0)
        !           332: 
        !           333: #endif
        !           334: 
        !           335: /* 
        !           336:  * SK_DEBUG
        !           337:  *
        !           338:  * Here you can choose what level of debugging wanted.
        !           339:  *
        !           340:  * If SK_DEBUG and SK_DEBUG2 are undefined, then only the
        !           341:  *  necessary messages will be printed.
        !           342:  *
        !           343:  * If SK_DEBUG is defined, there will be many debugging prints
        !           344:  *  which can help to find some mistakes in configuration or even
        !           345:  *  in the driver code.
        !           346:  *
        !           347:  * If SK_DEBUG2 is defined, many many messages will be printed 
        !           348:  *  which normally you don't need. I used this to check the interrupt
        !           349:  *  routine. 
        !           350:  *
        !           351:  * (If you define only SK_DEBUG2 then only the messages for 
        !           352:  *  checking interrupts will be printed!)
        !           353:  *
        !           354:  * Normal way of live is: 
        !           355:  *
        !           356:  * For the whole thing get going let both symbolic constants
        !           357:  * undefined. If you face any problems and you know what's going
        !           358:  * on (you know something about the card and you can interpret some
        !           359:  * hex LANCE register output) then define SK_DEBUG
        !           360:  * 
        !           361:  */
        !           362: 
        !           363: #undef  SK_DEBUG       /* debugging */
        !           364: #undef  SK_DEBUG2      /* debugging with more verbose report */
        !           365: 
        !           366: #ifdef SK_DEBUG
        !           367: #define PRINTK(x) printk x
        !           368: #else
        !           369: #define PRINTK(x) /**/
        !           370: #endif
        !           371: 
        !           372: #ifdef SK_DEBUG2
        !           373: #define PRINTK2(x) printk x
        !           374: #else
        !           375: #define PRINTK2(x) /**/
        !           376: #endif
        !           377: 
        !           378: /* 
        !           379:  * SK_G16 RAM
        !           380:  *
        !           381:  * The components are memory mapped and can be set in a region from
        !           382:  * 0x00000 through 0xfc000 in 16KB steps. 
        !           383:  *
        !           384:  * The Network components are: dual ported RAM, Prom, I/O Reg, Status-,
        !           385:  * Controlregister and I/O Command.
        !           386:  *
        !           387:  * dual ported RAM: This is the only memory region which the LANCE chip
        !           388:  *      has access to. From the Lance it is addressed from 0x0000 to
        !           389:  *      0x3fbf. The host accesses it normally.
        !           390:  *
        !           391:  * PROM: The PROM obtains the ETHERNET-MAC-Address. It is realised as a
        !           392:  *       8-Bit PROM, this means only the 16 even addresses are used of the
        !           393:  *       32 Byte Address region. Access to a odd address results in invalid
        !           394:  *       data.
        !           395:  * 
        !           396:  * LANCE I/O Reg: The I/O Reg is build of 4 single Registers, Low-Byte Write,
        !           397:  *       Hi-Byte Write, Low-Byte Read, Hi-Byte Read.
        !           398:  *       Transfer from or to the LANCE is always in 16Bit so Low and High
        !           399:  *       registers are always relevant.
        !           400:  *
        !           401:  *       The Data from the Readregister is not the data in the Writeregister!!
        !           402:  *       
        !           403:  * Port: Status- and Controlregister. 
        !           404:  *       Two different registers which share the same address, Status is 
        !           405:  *       read-only, Control is write-only.
        !           406:  *    
        !           407:  * I/O Command: 
        !           408:  *       Any bitcombination written in here starts the transmission between
        !           409:  *       Host and LANCE.
        !           410:  */
        !           411: 
        !           412: typedef struct
        !           413: {
        !           414:        unsigned char  ram[0x3fc0];   /* 16KB dual ported ram */
        !           415:        unsigned char  rom[0x0020];   /* 32Byte PROM containing 6Byte MAC */
        !           416:        unsigned char  res1[0x0010];  /* reserved */
        !           417:        unsigned volatile short ioreg;/* LANCE I/O Register */
        !           418:        unsigned volatile char  port; /* Statusregister and Controlregister */
        !           419:        unsigned char  iocom;         /* I/O Command Register */
        !           420: } SK_RAM;
        !           421: 
        !           422: /* struct  */
        !           423: 
        !           424: /* 
        !           425:  * This is the structure for the dual ported ram. We
        !           426:  * have exactly 16 320 Bytes. In here there must be:
        !           427:  *
        !           428:  *     - Initialize Block   (starting at a word boundary)
        !           429:  *     - Receive and Transmit Descriptor Rings (quadword boundary)
        !           430:  *     - Data Buffers (arbitrary boundary)
        !           431:  *
        !           432:  * This is because LANCE has on SK_G16 only access to the dual ported
        !           433:  * RAM and nowhere else.
        !           434:  */
        !           435: 
        !           436: struct SK_ram
        !           437: {
        !           438:     struct init_block ib;
        !           439:     struct tmd tmde[TMDNUM];
        !           440:     struct rmd rmde[RMDNUM];
        !           441:     char tmdbuf[TMDNUM][PKT_BUF_SZ];
        !           442:     char rmdbuf[RMDNUM][PKT_BUF_SZ];
        !           443: };
        !           444: 
        !           445: /* 
        !           446:  * Structure where all necessary information is for ring buffer 
        !           447:  * management and statistics.
        !           448:  */
        !           449: 
        !           450: struct priv
        !           451: {
        !           452:     struct SK_ram *ram;  /* dual ported ram structure */
        !           453:     struct rmd *rmdhead; /* start of receive ring descriptors */
        !           454:     struct tmd *tmdhead; /* start of transmit ring descriptors */
        !           455:     int        rmdnum;   /* actual used ring descriptor */
        !           456:     int        tmdnum;   /* actual transmit descriptor for transmitting data */
        !           457:     int        tmdlast;  /* last sent descriptor used for error handling, etc */
        !           458:     void       *rmdbufs[RMDNUM]; /* pointer to the receive buffers */
        !           459:     void       *tmdbufs[TMDNUM]; /* pointer to the transmit buffers */
        !           460:     struct enet_statistics stats; /* Device driver statistics */
        !           461: };
        !           462: 
        !           463: /* global variable declaration */
        !           464: 
        !           465: /* IRQ map used to reserve a IRQ (see SK_open()) */
        !           466: 
        !           467: /* extern void *irq2dev_map[16]; */ /* Declared in <linux/ioport.h> */
        !           468: 
        !           469: /* static variables */
        !           470: 
        !           471: static SK_RAM *board;  /* pointer to our memory mapped board components */
        !           472: 
        !           473: /* Macros */
        !           474: 
        !           475: 
        !           476: /* Function Prototypes */
        !           477: 
        !           478: /*
        !           479:  * Device Driver functions
        !           480:  * -----------------------
        !           481:  * See for short explanation of each function its definitions header.
        !           482:  */
        !           483: 
        !           484: int          SK_init(struct device *dev);
        !           485: static int   SK_probe(struct device *dev, short ioaddr);
        !           486: 
        !           487: static int   SK_open(struct device *dev);
        !           488: static int   SK_send_packet(struct sk_buff *skb, struct device *dev);
        !           489: static void  SK_interrupt(int irq, void *dev_id, struct pt_regs * regs);
        !           490: static void  SK_rxintr(struct device *dev);
        !           491: static void  SK_txintr(struct device *dev);
        !           492: static int   SK_close(struct device *dev);
        !           493: 
        !           494: static struct enet_statistics *SK_get_stats(struct device *dev);
        !           495: 
        !           496: unsigned int SK_rom_addr(void);
        !           497: 
        !           498: static void set_multicast_list(struct device *dev);
        !           499: 
        !           500: /*
        !           501:  * LANCE Functions
        !           502:  * ---------------
        !           503:  */
        !           504: 
        !           505: static int SK_lance_init(struct device *dev, unsigned short mode);
        !           506: void   SK_reset_board(void);
        !           507: void   SK_set_RAP(int reg_number);
        !           508: int    SK_read_reg(int reg_number);
        !           509: int    SK_rread_reg(void);
        !           510: void   SK_write_reg(int reg_number, int value);
        !           511: 
        !           512: /* 
        !           513:  * Debugging functions
        !           514:  * -------------------
        !           515:  */
        !           516: 
        !           517: void SK_print_pos(struct device *dev, char *text);
        !           518: void SK_print_dev(struct device *dev, char *text);
        !           519: void SK_print_ram(struct device *dev);
        !           520: 
        !           521: 
        !           522: /*-
        !           523:  * Function       : SK_init
        !           524:  * Author         : Patrick J.D. Weichmann
        !           525:  * Date Created   : 94/05/26
        !           526:  *
        !           527:  * Description    : Check for a SK_G16 network adaptor and initialize it.
        !           528:  *                  This function gets called by dev_init which initializes
        !           529:  *                  all Network devices.
        !           530:  *
        !           531:  * Parameters     : I : struct device *dev - structure preconfigured 
        !           532:  *                                           from Space.c
        !           533:  * Return Value   : 0 = Driver Found and initialized 
        !           534:  * Errors         : ENODEV - no device found
        !           535:  *                  ENXIO  - not probed
        !           536:  * Globals        : None
        !           537:  * Update History :
        !           538:  *     YY/MM/DD  uid  Description
        !           539: -*/
        !           540: 
        !           541: /* 
        !           542:  * Check for a network adaptor of this type, and return '0' if one exists.
        !           543:  * If dev->base_addr == 0, probe all likely locations.
        !           544:  * If dev->base_addr == 1, always return failure.
        !           545:  * If dev->base_addr == 2, allocate space for the device and return success
        !           546:  *                         (detachable devices only).
        !           547:  */
        !           548: 
        !           549: int SK_init(struct device *dev)
        !           550: {
        !           551:        int ioaddr         = 0;            /* I/O port address used for POS regs */
        !           552:        int *port, ports[] = SK_IO_PORTS;  /* SK_G16 supported ports */
        !           553: 
        !           554:        /* get preconfigured base_addr from dev which is done in Space.c */
        !           555:        int base_addr = dev->base_addr; 
        !           556: 
        !           557:         PRINTK(("%s: %s", SK_NAME, rcsid));
        !           558:         rcsid = NULL;                 /* We do not want to use this further */
        !           559: 
        !           560:        if (base_addr > 0x0ff)        /* Check a single specified address */
        !           561:        {
        !           562:            /* Check if on specified address is a SK_G16 */
        !           563: 
        !           564:            if ( (inb(SK_POS0) == SK_IDLOW) ||
        !           565:                 (inb(SK_POS1) == SK_IDHIGH) )  
        !           566:            {
        !           567:                return SK_probe(dev, base_addr);  
        !           568:            }
        !           569: 
        !           570:            return ENODEV;            /* Sorry, but on specified address NO SK_G16 */
        !           571:        }
        !           572:        else if (base_addr > 0)       /* Don't probe at all */
        !           573:        {
        !           574:                return ENXIO;
        !           575:        }
        !           576: 
        !           577:        /* Autoprobe base_addr */
        !           578: 
        !           579:        for (port = &ports[0]; *port; port++) 
        !           580:        {
        !           581:            ioaddr = *port;           /* we need ioaddr for accessing POS regs */
        !           582: 
        !           583:            /* Check if I/O Port region is used by another board */
        !           584: 
        !           585:            if (check_region(ioaddr, ETHERCARD_TOTAL_SIZE))
        !           586:            {
        !           587:                continue;             /* Try next Port address */
        !           588:            }
        !           589: 
        !           590:            /* Check if at ioaddr is a SK_G16 */
        !           591: 
        !           592:            if ( !(inb(SK_POS0) == SK_IDLOW) ||
        !           593:                 !(inb(SK_POS1) == SK_IDHIGH) )
        !           594:            {
        !           595:                continue;             /* Try next Port address */
        !           596:            }
        !           597: 
        !           598:            dev->base_addr = ioaddr;  /* Set I/O Port Address */
        !           599: 
        !           600:            if (SK_probe(dev, ioaddr) == 0)  
        !           601:            {
        !           602:                return 0; /* Card found and initialized */
        !           603:            }
        !           604:        }
        !           605: 
        !           606:        dev->base_addr = base_addr;   /* Write back original base_addr */
        !           607: 
        !           608:        return ENODEV;                /* Failed to find or init driver */
        !           609: 
        !           610: } /* End of SK_init */
        !           611: 
        !           612: 
        !           613: /*-
        !           614:  * Function       : SK_probe
        !           615:  * Author         : Patrick J.D. Weichmann
        !           616:  * Date Created   : 94/05/26
        !           617:  *
        !           618:  * Description    : This function is called by SK_init and 
        !           619:  *                  does the main part of initialization.
        !           620:  *                  
        !           621:  * Parameters     : I : struct device *dev - SK_G16 device structure
        !           622:  *                  I : short ioaddr       - I/O Port address where POS is.
        !           623:  * Return Value   : 0 = Initialization done             
        !           624:  * Errors         : ENODEV - No SK_G16 found
        !           625:  *                  -1     - Configuration problem
        !           626:  * Globals        : irq2dev_map - Which device uses which IRQ
        !           627:  *                : board       - pointer to SK_RAM
        !           628:  * Update History :
        !           629:  *     YY/MM/DD  uid  Description
        !           630:  *     94/06/30  pwe  SK_ADDR now checked and at the correct place
        !           631: -*/
        !           632: 
        !           633: int SK_probe(struct device *dev, short ioaddr)
        !           634: {
        !           635:     int i,j;                /* Counters */
        !           636:     int sk_addr_flag = 0;   /* SK ADDR correct? 1 - no, 0 - yes */
        !           637:     unsigned int rom_addr;  /* used to store RAM address used for POS_ADDR */
        !           638: 
        !           639:     struct priv *p;         /* SK_G16 private structure */
        !           640: 
        !           641:     if (SK_ADDR & 0x3fff || SK_ADDR < 0xa0000)
        !           642:     {
        !           643:       
        !           644:        sk_addr_flag = 1;
        !           645: 
        !           646:        /* 
        !           647:         * Now here we could use a routine which searches for a free
        !           648:         * place in the ram and set SK_ADDR if found. TODO. 
        !           649:         */
        !           650:     }
        !           651: 
        !           652:     if (SK_BOOT_ROM)            /* Shall we keep Boot_ROM on ? */
        !           653:     {
        !           654:         PRINTK(("## %s: SK_BOOT_ROM is set.\n", SK_NAME));
        !           655: 
        !           656:         rom_addr = SK_rom_addr();
        !           657: 
        !           658:        if (rom_addr == 0)      /* No Boot_ROM found */
        !           659:        {
        !           660:             if (sk_addr_flag)   /* No or Invalid SK_ADDR is defined */ 
        !           661:             {
        !           662:                 printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n",
        !           663:                        dev->name, SK_ADDR);
        !           664:                 return -1;
        !           665:             }
        !           666: 
        !           667:            rom_addr = SK_ADDR; /* assign predefined address */
        !           668: 
        !           669:            PRINTK(("## %s: NO Bootrom found \n", SK_NAME));
        !           670: 
        !           671:            outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */
        !           672:            outb(POS_ADDR, SK_POS3);       /* Set RAM address */
        !           673:            outb(SK_RAM_ON, SK_POS2);      /* enable RAM */
        !           674:        }
        !           675:        else if (rom_addr == SK_ADDR) 
        !           676:        {
        !           677:             printk("%s: RAM + ROM are set to the same address %#08x\n"
        !           678:                    "   Check configuration. Now switching off Boot_ROM\n",
        !           679:                    SK_NAME, rom_addr);
        !           680: 
        !           681:            outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off*/
        !           682:            outb(POS_ADDR, SK_POS3);       /* Set RAM address */
        !           683:            outb(SK_RAM_ON, SK_POS2);      /* enable RAM */
        !           684:        }
        !           685:        else
        !           686:        {
        !           687:             PRINTK(("## %s: Found ROM at %#08x\n", SK_NAME, rom_addr));
        !           688:            PRINTK(("## %s: Keeping Boot_ROM on\n", SK_NAME));
        !           689: 
        !           690:             if (sk_addr_flag)       /* No or Invalid SK_ADDR is defined */ 
        !           691:             {
        !           692:                 printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n",
        !           693:                        dev->name, SK_ADDR);
        !           694:                 return -1;
        !           695:             }
        !           696: 
        !           697:            rom_addr = SK_ADDR;
        !           698: 
        !           699:            outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */ 
        !           700:            outb(POS_ADDR, SK_POS3);       /* Set RAM address */
        !           701:            outb(SK_ROM_RAM_ON, SK_POS2);  /* RAM on, BOOT_ROM on */
        !           702:        }
        !           703:     }
        !           704:     else /* Don't keep Boot_ROM */
        !           705:     {
        !           706:         PRINTK(("## %s: SK_BOOT_ROM is not set.\n", SK_NAME));
        !           707: 
        !           708:         if (sk_addr_flag)           /* No or Invalid SK_ADDR is defined */ 
        !           709:         {
        !           710:             printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n",
        !           711:                    dev->name, SK_ADDR);
        !           712:             return -1;
        !           713:         }
        !           714: 
        !           715:        rom_addr = SK_rom_addr();          /* Try to find a Boot_ROM */
        !           716: 
        !           717:        /* IF we find a Boot_ROM disable it */
        !           718: 
        !           719:        outb(SK_ROM_RAM_OFF, SK_POS2);     /* Boot_ROM + RAM off */  
        !           720: 
        !           721:         /* We found a Boot_ROM and it's gone. Set RAM address on
        !           722:          * Boot_ROM address. 
        !           723:          */ 
        !           724: 
        !           725:        if (rom_addr) 
        !           726:        {
        !           727:             printk("%s: We found Boot_ROM at %#08x. Now setting RAM on"
        !           728:                    "that address\n", SK_NAME, rom_addr);
        !           729: 
        !           730:            outb(POS_ADDR, SK_POS3);       /* Set RAM on Boot_ROM address */
        !           731:        }
        !           732:        else /* We did not find a Boot_ROM, use predefined SK_ADDR for ram */
        !           733:        {
        !           734:             if (sk_addr_flag)       /* No or Invalid SK_ADDR is defined */ 
        !           735:             {
        !           736:                 printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n",
        !           737:                        dev->name, SK_ADDR);
        !           738:                 return -1;
        !           739:             }
        !           740: 
        !           741:            rom_addr = SK_ADDR;
        !           742: 
        !           743:            outb(POS_ADDR, SK_POS3);       /* Set RAM address */ 
        !           744:        }
        !           745:        outb(SK_RAM_ON, SK_POS2);          /* enable RAM */
        !           746:     }
        !           747: 
        !           748: #ifdef SK_DEBUG
        !           749:     SK_print_pos(dev, "POS registers after ROM, RAM config");
        !           750: #endif
        !           751: 
        !           752:     board = (SK_RAM *) rom_addr; 
        !           753: 
        !           754:     /* Read in station address */
        !           755:     for (i = 0, j = 0; i < ETH_ALEN; i++, j+=2)
        !           756:     {
        !           757:        dev->dev_addr[i] = board->rom[j];          
        !           758:     }
        !           759: 
        !           760:     /* Check for manufacturer code */
        !           761:     if (!(dev->dev_addr[0] == SK_MAC0 &&
        !           762:          dev->dev_addr[1] == SK_MAC1 &&
        !           763:          dev->dev_addr[2] == SK_MAC2) )
        !           764:     {
        !           765:         PRINTK(("## %s: We did not find SK_G16 at RAM location.\n",
        !           766:                 SK_NAME)); 
        !           767:        return ENODEV;                     /* NO SK_G16 found */
        !           768:     }
        !           769: 
        !           770:     printk("%s: %s found at %#3x, HW addr: %#04x:%02x:%02x:%02x:%02x:%02x\n",
        !           771:            dev->name,
        !           772:            "Schneider & Koch Netcard",
        !           773:            (unsigned int) dev->base_addr,
        !           774:            dev->dev_addr[0],
        !           775:            dev->dev_addr[1],
        !           776:            dev->dev_addr[2],
        !           777:            dev->dev_addr[3],
        !           778:            dev->dev_addr[4],
        !           779:            dev->dev_addr[5]);
        !           780: 
        !           781:     /* Allocate memory for private structure */
        !           782:     p = dev->priv = (void *) kmalloc(sizeof(struct priv), GFP_KERNEL);
        !           783:     if (p == NULL) {
        !           784:           printk("%s: ERROR - no memory for driver data!\n", dev->name);
        !           785:           return -ENOMEM;
        !           786:     }
        !           787:     memset((char *) dev->priv, 0, sizeof(struct priv)); /* clear memory */
        !           788: 
        !           789:     /* Grab the I/O Port region */
        !           790:     request_region(ioaddr, ETHERCARD_TOTAL_SIZE,"sk_g16");
        !           791: 
        !           792:     /* Assign our Device Driver functions */
        !           793: 
        !           794:     dev->open                   = &SK_open;
        !           795:     dev->stop                   = &SK_close;
        !           796:     dev->hard_start_xmit        = &SK_send_packet;
        !           797:     dev->get_stats              = &SK_get_stats;
        !           798:     dev->set_multicast_list     = &set_multicast_list;
        !           799: 
        !           800: 
        !           801:     /* Set the generic fields of the device structure */
        !           802: 
        !           803:     ether_setup(dev);
        !           804:     
        !           805:     dev->flags &= ~IFF_MULTICAST;
        !           806: 
        !           807:     /* Initialize private structure */
        !           808: 
        !           809:     p->ram = (struct SK_ram *) rom_addr; /* Set dual ported RAM addr */
        !           810:     p->tmdhead = &(p->ram)->tmde[0];     /* Set TMD head */
        !           811:     p->rmdhead = &(p->ram)->rmde[0];     /* Set RMD head */
        !           812: 
        !           813:     /* Initialize buffer pointers */
        !           814: 
        !           815:     for (i = 0; i < TMDNUM; i++)
        !           816:     {
        !           817:        p->tmdbufs[i] = &(p->ram)->tmdbuf[i];
        !           818:     }
        !           819: 
        !           820:     for (i = 0; i < RMDNUM; i++)
        !           821:     {
        !           822:        p->rmdbufs[i] = &(p->ram)->rmdbuf[i]; 
        !           823:     }
        !           824: 
        !           825: #ifdef SK_DEBUG
        !           826:     SK_print_pos(dev, "End of SK_probe");
        !           827:     SK_print_ram(dev);
        !           828: #endif 
        !           829: 
        !           830:     return 0;                            /* Initialization done */
        !           831: 
        !           832: } /* End of SK_probe() */
        !           833: 
        !           834: 
        !           835: /*- 
        !           836:  * Function       : SK_open
        !           837:  * Author         : Patrick J.D. Weichmann
        !           838:  * Date Created   : 94/05/26
        !           839:  *
        !           840:  * Description    : This function is called sometimes after booting 
        !           841:  *                  when ifconfig program is run.
        !           842:  *
        !           843:  *                  This function requests an IRQ, sets the correct
        !           844:  *                  IRQ in the card. Then calls SK_lance_init() to 
        !           845:  *                  init and start the LANCE chip. Then if everything is 
        !           846:  *                  ok returns with 0 (OK), which means SK_G16 is now
        !           847:  *                  opened and operational.
        !           848:  *
        !           849:  *                  (Called by dev_open() /net/inet/dev.c)
        !           850:  *
        !           851:  * Parameters     : I : struct device *dev - SK_G16 device structure
        !           852:  * Return Value   : 0 - Device opened
        !           853:  * Errors         : -EAGAIN - Open failed
        !           854:  * Globals        : irq2dev_map - which device uses which irq
        !           855:  * Side Effects   : None
        !           856:  * Update History :
        !           857:  *     YY/MM/DD  uid  Description
        !           858: -*/
        !           859: 
        !           860: static int SK_open(struct device *dev)
        !           861: {
        !           862:     int i = 0;
        !           863:     int irqval = 0;
        !           864:     int ioaddr = dev->base_addr;
        !           865: 
        !           866:     int irqtab[] = SK_IRQS; 
        !           867: 
        !           868:     struct priv *p = (struct priv *)dev->priv;
        !           869: 
        !           870:     PRINTK(("## %s: At beginning of SK_open(). CSR0: %#06x\n", 
        !           871:            SK_NAME, SK_read_reg(CSR0)));
        !           872: 
        !           873:     if (dev->irq == 0) /* Autoirq */
        !           874:     {
        !           875:        i = 0;
        !           876: 
        !           877:        /* 
        !           878:          * Check if one IRQ out of SK_IRQS is free and install 
        !           879:         * interrupt handler.
        !           880:         * Most done by request_irq(). 
        !           881:         * irqval: 0       - interrupt handler installed for IRQ irqtab[i]
        !           882:         *         -EBUSY  - interrupt busy 
        !           883:          *         -EINVAL - irq > 15 or handler = NULL
        !           884:         */
        !           885: 
        !           886:        do
        !           887:        {
        !           888:          irqval = request_irq(irqtab[i], &SK_interrupt, 0, "sk_g16", NULL);
        !           889:          i++;
        !           890:        } while (irqval && irqtab[i]);
        !           891: 
        !           892:        if (irqval) /* We tried every possible IRQ but no success */
        !           893:        {
        !           894:            printk("%s: unable to get an IRQ\n", dev->name);
        !           895:            return -EAGAIN;
        !           896:        }
        !           897: 
        !           898:        dev->irq = irqtab[--i]; 
        !           899:        
        !           900:        outb(i<<2, SK_POS4);           /* Set Card on probed IRQ */
        !           901: 
        !           902:     }
        !           903:     else if (dev->irq == 2) /* IRQ2 is always IRQ9 */
        !           904:     {
        !           905:        if (request_irq(9, &SK_interrupt, 0, "sk_g16", NULL))
        !           906:        {
        !           907:            printk("%s: unable to get IRQ 9\n", dev->name);
        !           908:            return -EAGAIN;
        !           909:        } 
        !           910:        dev->irq = 9;
        !           911:        
        !           912:         /* 
        !           913:          * Now we set card on IRQ2.
        !           914:          * This can be confusing, but remember that IRQ2 on the network
        !           915:          * card is in reality IRQ9
        !           916:          */
        !           917:        outb(0x08, SK_POS4);           /* set card to IRQ2 */
        !           918: 
        !           919:     }
        !           920:     else  /* Check IRQ as defined in Space.c */
        !           921:     {
        !           922:        int i = 0;
        !           923: 
        !           924:        /* check if IRQ free and valid. Then install Interrupt handler */
        !           925: 
        !           926:        if (request_irq(dev->irq, &SK_interrupt, 0, "sk_g16", NULL))
        !           927:        {
        !           928:            printk("%s: unable to get selected IRQ\n", dev->name);
        !           929:            return -EAGAIN;
        !           930:        }
        !           931: 
        !           932:        switch(dev->irq)
        !           933:        {
        !           934:            case 3: i = 0;
        !           935:                    break;
        !           936:            case 5: i = 1;
        !           937:                    break;
        !           938:            case 2: i = 2;
        !           939:                    break;
        !           940:            case 11:i = 3;
        !           941:                    break;
        !           942:            default: 
        !           943:                printk("%s: Preselected IRQ %d is invalid for %s boards",
        !           944:                       dev->name,
        !           945:                       dev->irq,
        !           946:                        SK_NAME);
        !           947:                return -EAGAIN;
        !           948:        }      
        !           949:   
        !           950:        outb(i<<2, SK_POS4);           /* Set IRQ on card */
        !           951:     }
        !           952: 
        !           953:     irq2dev_map[dev->irq] = dev;       /* Set IRQ as used by us */
        !           954:     
        !           955:     printk("%s: Schneider & Koch G16 at %#3x, IRQ %d, shared mem at %#08x\n",
        !           956:            dev->name, (unsigned int)dev->base_addr, 
        !           957:            (int) dev->irq, (unsigned int) p->ram);
        !           958: 
        !           959:     if (!(i = SK_lance_init(dev, 0)))  /* LANCE init OK? */
        !           960:     {
        !           961: 
        !           962: 
        !           963:        dev->tbusy = 0;
        !           964:        dev->interrupt = 0;
        !           965:        dev->start = 1;
        !           966: 
        !           967: #ifdef SK_DEBUG
        !           968: 
        !           969:         /* 
        !           970:          * This debug block tries to stop LANCE,
        !           971:          * reinit LANCE with transmitter and receiver disabled,
        !           972:          * then stop again and reinit with NORMAL_MODE
        !           973:          */
        !           974: 
        !           975:         printk("## %s: After lance init. CSR0: %#06x\n", 
        !           976:                SK_NAME, SK_read_reg(CSR0));
        !           977:         SK_write_reg(CSR0, CSR0_STOP);
        !           978:         printk("## %s: LANCE stopped. CSR0: %#06x\n", 
        !           979:                SK_NAME, SK_read_reg(CSR0));
        !           980:         SK_lance_init(dev, MODE_DTX | MODE_DRX);
        !           981:         printk("## %s: Reinit with DTX + DRX off. CSR0: %#06x\n", 
        !           982:                SK_NAME, SK_read_reg(CSR0));
        !           983:         SK_write_reg(CSR0, CSR0_STOP);
        !           984:         printk("## %s: LANCE stopped. CSR0: %#06x\n", 
        !           985:                SK_NAME, SK_read_reg(CSR0));
        !           986:         SK_lance_init(dev, MODE_NORMAL);
        !           987:         printk("## %s: LANCE back to normal mode. CSR0: %#06x\n", 
        !           988:                SK_NAME, SK_read_reg(CSR0));
        !           989:         SK_print_pos(dev, "POS regs before returning OK");
        !           990: 
        !           991: #endif /* SK_DEBUG */
        !           992:        
        !           993:        return 0;              /* SK_open() is successful */
        !           994:     }
        !           995:     else /* LANCE init failed */
        !           996:     {
        !           997: 
        !           998:        PRINTK(("## %s: LANCE init failed: CSR0: %#06x\n", 
        !           999:                SK_NAME, SK_read_reg(CSR0)));
        !          1000: 
        !          1001:        dev->start = 0;        /* Device not ready */
        !          1002:        return -EAGAIN;
        !          1003:     }
        !          1004: 
        !          1005: } /* End of SK_open() */
        !          1006: 
        !          1007: 
        !          1008: /*-
        !          1009:  * Function       : SK_lance_init
        !          1010:  * Author         : Patrick J.D. Weichmann
        !          1011:  * Date Created   : 94/05/26
        !          1012:  *
        !          1013:  * Description    : Reset LANCE chip, fill RMD, TMD structures with
        !          1014:  *                  start values and Start LANCE.
        !          1015:  *
        !          1016:  * Parameters     : I : struct device *dev - SK_G16 device structure
        !          1017:  *                  I : int mode - put LANCE into "mode" see data-sheet for
        !          1018:  *                                 more info.
        !          1019:  * Return Value   : 0  - Init done
        !          1020:  * Errors         : -1 - Init failed
        !          1021:  * Update History :
        !          1022:  *     YY/MM/DD  uid  Description
        !          1023: -*/
        !          1024: 
        !          1025: static int SK_lance_init(struct device *dev, unsigned short mode)
        !          1026: {
        !          1027:     int i;
        !          1028:     struct priv *p = (struct priv *) dev->priv; 
        !          1029:     struct tmd  *tmdp;
        !          1030:     struct rmd  *rmdp;
        !          1031: 
        !          1032:     PRINTK(("## %s: At beginning of LANCE init. CSR0: %#06x\n", 
        !          1033:            SK_NAME, SK_read_reg(CSR0)));
        !          1034: 
        !          1035:     /* Reset LANCE */
        !          1036:     SK_reset_board();
        !          1037: 
        !          1038:     /* Initialize TMD's with start values */
        !          1039:     p->tmdnum = 0;                   /* First descriptor for transmitting */ 
        !          1040:     p->tmdlast = 0;                  /* First descriptor for reading stats */
        !          1041: 
        !          1042:     for (i = 0; i < TMDNUM; i++)     /* Init all TMD's */
        !          1043:     {
        !          1044:        tmdp = p->tmdhead + i; 
        !          1045:    
        !          1046:        tmdp->u.buffer = (unsigned long) p->tmdbufs[i]; /* assign buffer */
        !          1047:        
        !          1048:        /* Mark TMD as start and end of packet */
        !          1049:        tmdp->u.s.status = TX_STP | TX_ENP;
        !          1050:     }
        !          1051: 
        !          1052: 
        !          1053:     /* Initialize RMD's with start values */
        !          1054: 
        !          1055:     p->rmdnum = 0;                   /* First RMD which will be used */
        !          1056:  
        !          1057:     for (i = 0; i < RMDNUM; i++)     /* Init all RMD's */
        !          1058:     {
        !          1059:        rmdp = p->rmdhead + i;
        !          1060: 
        !          1061:        
        !          1062:        rmdp->u.buffer = (unsigned long) p->rmdbufs[i]; /* assign buffer */
        !          1063:        
        !          1064:        /* 
        !          1065:          * LANCE must be owner at beginning so that he can fill in 
        !          1066:         * receiving packets, set status and release RMD 
        !          1067:         */
        !          1068: 
        !          1069:        rmdp->u.s.status = RX_OWN;  
        !          1070: 
        !          1071:        rmdp->blen = -PKT_BUF_SZ;    /* Buffer Size in a two's complement */
        !          1072: 
        !          1073:        rmdp->mlen = 0;              /* init message length */       
        !          1074:        
        !          1075:     }
        !          1076: 
        !          1077:     /* Fill LANCE Initialize Block */
        !          1078: 
        !          1079:     (p->ram)->ib.mode = mode;        /* Set operation mode */
        !          1080: 
        !          1081:     for (i = 0; i < ETH_ALEN; i++)   /* Set physical address */
        !          1082:     {
        !          1083:        (p->ram)->ib.paddr[i] = dev->dev_addr[i]; 
        !          1084:     }
        !          1085: 
        !          1086:     for (i = 0; i < 8; i++)          /* Set multicast, logical address */
        !          1087:     {
        !          1088:        (p->ram)->ib.laddr[i] = 0;   /* We do not use logical addressing */
        !          1089:     } 
        !          1090: 
        !          1091:     /* Set ring descriptor pointers and set number of descriptors */
        !          1092: 
        !          1093:     (p->ram)->ib.rdrp = (int)  p->rmdhead | RMDNUMMASK;
        !          1094:     (p->ram)->ib.tdrp = (int)  p->tmdhead | TMDNUMMASK;
        !          1095: 
        !          1096:     /* Prepare LANCE Control and Status Registers */
        !          1097: 
        !          1098:     cli();
        !          1099: 
        !          1100:     SK_write_reg(CSR3, CSR3_ACON);   /* Ale Control !!!THIS MUST BE SET!!!! */
        !          1101:  
        !          1102:     /* 
        !          1103:      * LANCE addresses the RAM from 0x0000 to 0x3fbf and has no access to
        !          1104:      * PC Memory locations.
        !          1105:      *
        !          1106:      * In structure SK_ram is defined that the first thing in ram
        !          1107:      * is the initialization block. So his address is for LANCE always
        !          1108:      * 0x0000
        !          1109:      *
        !          1110:      * CSR1 contains low order bits 15:0 of initialization block address
        !          1111:      * CSR2 is built of: 
        !          1112:      *    7:0  High order bits 23:16 of initialization block address
        !          1113:      *   15:8  reserved, must be 0
        !          1114:      */
        !          1115:     
        !          1116:     /* Set initialization block address (must be on word boundary) */
        !          1117:     SK_write_reg(CSR1, 0);          /* Set low order bits 15:0 */
        !          1118:     SK_write_reg(CSR2, 0);          /* Set high order bits 23:16 */ 
        !          1119:     
        !          1120: 
        !          1121:     PRINTK(("## %s: After setting CSR1-3. CSR0: %#06x\n", 
        !          1122:            SK_NAME, SK_read_reg(CSR0)));
        !          1123: 
        !          1124:     /* Initialize LANCE */
        !          1125: 
        !          1126:     /* 
        !          1127:      * INIT = Initialize, when set, causes the LANCE to begin the
        !          1128:      * initialization procedure and access the Init Block.
        !          1129:      */
        !          1130: 
        !          1131:     SK_write_reg(CSR0, CSR0_INIT); 
        !          1132: 
        !          1133:     sti();
        !          1134: 
        !          1135:     /* Wait until LANCE finished initialization */
        !          1136:     
        !          1137:     SK_set_RAP(CSR0);              /* Register Address Pointer to CSR0 */
        !          1138: 
        !          1139:     for (i = 0; (i < 100) && !(SK_rread_reg() & CSR0_IDON); i++) 
        !          1140:        ; /* Wait until init done or go ahead if problems (i>=100) */
        !          1141: 
        !          1142:     if (i >= 100) /* Something is wrong ! */
        !          1143:     {
        !          1144:        printk("%s: can't init am7990, status: %04x "
        !          1145:               "init_block: %#08x\n", 
        !          1146:                dev->name, (int) SK_read_reg(CSR0), 
        !          1147:                (unsigned int) &(p->ram)->ib);
        !          1148: 
        !          1149: #ifdef SK_DEBUG
        !          1150:        SK_print_pos(dev, "LANCE INIT failed");
        !          1151:        SK_print_dev(dev,"Device Structure:");
        !          1152: #endif
        !          1153: 
        !          1154:        return -1;                 /* LANCE init failed */
        !          1155:     }
        !          1156: 
        !          1157:     PRINTK(("## %s: init done after %d ticks\n", SK_NAME, i));
        !          1158: 
        !          1159:     /* Clear Initialize done, enable Interrupts, start LANCE */
        !          1160: 
        !          1161:     SK_write_reg(CSR0, CSR0_IDON | CSR0_INEA | CSR0_STRT);
        !          1162: 
        !          1163:     PRINTK(("## %s: LANCE started. CSR0: %#06x\n", SK_NAME, 
        !          1164:             SK_read_reg(CSR0)));
        !          1165: 
        !          1166:     return 0;                      /* LANCE is up and running */
        !          1167: 
        !          1168: } /* End of SK_lance_init() */
        !          1169: 
        !          1170: 
        !          1171: 
        !          1172: /*-
        !          1173:  * Function       : SK_send_packet
        !          1174:  * Author         : Patrick J.D. Weichmann
        !          1175:  * Date Created   : 94/05/27
        !          1176:  *
        !          1177:  * Description    : Writes an socket buffer into a transmit descriptor
        !          1178:  *                  and starts transmission.
        !          1179:  *
        !          1180:  * Parameters     : I : struct sk_buff *skb - packet to transfer
        !          1181:  *                  I : struct device *dev  - SK_G16 device structure
        !          1182:  * Return Value   : 0 - OK
        !          1183:  *                  1 - Could not transmit (dev_queue_xmit will queue it)
        !          1184:  *                      and try to sent it later
        !          1185:  * Globals        : None
        !          1186:  * Side Effects   : None
        !          1187:  * Update History :
        !          1188:  *     YY/MM/DD  uid  Description
        !          1189: -*/
        !          1190: 
        !          1191: static int SK_send_packet(struct sk_buff *skb, struct device *dev)
        !          1192: {
        !          1193:     struct priv *p = (struct priv *) dev->priv;
        !          1194:     struct tmd *tmdp;
        !          1195: 
        !          1196:     if (dev->tbusy)
        !          1197:     {
        !          1198:        /* if Transmitter more than 150ms busy -> time_out */
        !          1199: 
        !          1200:        int tickssofar = jiffies - dev->trans_start;
        !          1201:        if (tickssofar < 15)
        !          1202:        {
        !          1203:            return 1;                    /* We have to try transmit later */
        !          1204:        }
        !          1205: 
        !          1206:        printk("%s: xmitter timed out, try to restart!\n", dev->name);
        !          1207: 
        !          1208:        SK_lance_init(dev, MODE_NORMAL); /* Reinit LANCE */
        !          1209: 
        !          1210:        dev->tbusy = 0;                  /* Clear Transmitter flag */
        !          1211: 
        !          1212:        dev->trans_start = jiffies;      /* Mark Start of transmission */
        !          1213: 
        !          1214:     }
        !          1215: 
        !          1216:     /* 
        !          1217:      * If some upper Layer thinks we missed a transmit done interrupt
        !          1218:      * we are passed NULL.
        !          1219:      * (dev_queue_xmit net/inet/dev.c 
        !          1220:      */
        !          1221: 
        !          1222:     if (skb == NULL)
        !          1223:     {
        !          1224:         /* 
        !          1225:          * Dequeue packets from transmit queue and send them.
        !          1226:          */
        !          1227:        dev_tint(dev); 
        !          1228:                     
        !          1229:        return 0;
        !          1230:     }
        !          1231:     
        !          1232:     PRINTK2(("## %s: SK_send_packet() called, CSR0 %#04x.\n", 
        !          1233:            SK_NAME, SK_read_reg(CSR0)));
        !          1234: 
        !          1235: 
        !          1236:     /* 
        !          1237:      * Block a timer-based transmit from overlapping. 
        !          1238:      * This means check if we are already in. 
        !          1239:      */
        !          1240: 
        !          1241:     if (set_bit(0, (void *) &dev->tbusy) != 0) /* dev->tbusy already set ? */ 
        !          1242:     {
        !          1243:        printk("%s: Transmitter access conflict.\n", dev->name);
        !          1244:     }
        !          1245:     else
        !          1246:     {
        !          1247:        /* Evaluate Packet length */
        !          1248:        short len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; 
        !          1249:        
        !          1250:        tmdp = p->tmdhead + p->tmdnum; /* Which descriptor for transmitting */
        !          1251: 
        !          1252:        /* Fill in Transmit Message Descriptor */
        !          1253: 
        !          1254:        /* Copy data into dual ported ram */
        !          1255: 
        !          1256:        memcpy((char *) (tmdp->u.buffer & 0x00ffffff), (char *)skb->data,
        !          1257:               skb->len);
        !          1258: 
        !          1259:        tmdp->blen = -len;            /* set length to transmit */
        !          1260: 
        !          1261:        /* 
        !          1262:         * Packet start and end is always set because we use the maximum
        !          1263:         * packet length as buffer length.
        !          1264:         * Relinquish ownership to LANCE
        !          1265:         */
        !          1266: 
        !          1267:        tmdp->u.s.status = TX_OWN | TX_STP | TX_ENP;
        !          1268:        
        !          1269:        /* Start Demand Transmission */
        !          1270:        SK_write_reg(CSR0, CSR0_TDMD | CSR0_INEA);
        !          1271: 
        !          1272:        dev->trans_start = jiffies;   /* Mark start of transmission */
        !          1273: 
        !          1274:        /* Set pointer to next transmit buffer */
        !          1275:        p->tmdnum++; 
        !          1276:        p->tmdnum &= TMDNUM-1; 
        !          1277: 
        !          1278:        /* Do we own the next transmit buffer ? */
        !          1279:        if (! ((p->tmdhead + p->tmdnum)->u.s.status & TX_OWN) )
        !          1280:        {
        !          1281:           /* 
        !          1282:            * We own next buffer and are ready to transmit, so
        !          1283:            * clear busy flag
        !          1284:            */
        !          1285:           dev->tbusy = 0;
        !          1286:        }
        !          1287:     }
        !          1288:     dev_kfree_skb(skb, FREE_WRITE);
        !          1289:     return 0;  
        !          1290: } /* End of SK_send_packet */
        !          1291: 
        !          1292: 
        !          1293: /*-
        !          1294:  * Function       : SK_interrupt
        !          1295:  * Author         : Patrick J.D. Weichmann
        !          1296:  * Date Created   : 94/05/27
        !          1297:  *
        !          1298:  * Description    : SK_G16 interrupt handler which checks for LANCE
        !          1299:  *                  Errors, handles transmit and receive interrupts
        !          1300:  *
        !          1301:  * Parameters     : I : int irq, void *dev_id, struct pt_regs * regs -
        !          1302:  * Return Value   : None
        !          1303:  * Errors         : None
        !          1304:  * Globals        : None
        !          1305:  * Side Effects   : None
        !          1306:  * Update History :
        !          1307:  *     YY/MM/DD  uid  Description
        !          1308: -*/
        !          1309: 
        !          1310: static void SK_interrupt(int irq, void *dev_id, struct pt_regs * regs)
        !          1311: {
        !          1312:     int csr0;
        !          1313:     struct device *dev = (struct device *) irq2dev_map[irq];
        !          1314:     struct priv *p = (struct priv *) dev->priv;
        !          1315: 
        !          1316: 
        !          1317:     PRINTK2(("## %s: SK_interrupt(). status: %#06x\n", 
        !          1318:             SK_NAME, SK_read_reg(CSR0)));
        !          1319: 
        !          1320:     if (dev == NULL)
        !          1321:     {
        !          1322:        printk("SK_interrupt(): IRQ %d for unknown device.\n", irq);
        !          1323:     }
        !          1324:     
        !          1325: 
        !          1326:     if (dev->interrupt)
        !          1327:     {
        !          1328:        printk("%s: Re-entering the interrupt handler.\n", dev->name);
        !          1329:     }
        !          1330: 
        !          1331:     csr0 = SK_read_reg(CSR0);      /* store register for checking */
        !          1332: 
        !          1333:     dev->interrupt = 1;            /* We are handling an interrupt */
        !          1334: 
        !          1335:     /* 
        !          1336:      * Acknowledge all of the current interrupt sources, disable      
        !          1337:      * Interrupts (INEA = 0) 
        !          1338:      */
        !          1339: 
        !          1340:     SK_write_reg(CSR0, csr0 & CSR0_CLRALL); 
        !          1341: 
        !          1342:     if (csr0 & CSR0_ERR) /* LANCE Error */
        !          1343:     {
        !          1344:        printk("%s: error: %04x\n", dev->name, csr0);
        !          1345:       
        !          1346:         if (csr0 & CSR0_MISS)      /* No place to store packet ? */
        !          1347:         { 
        !          1348:             p->stats.rx_dropped++;
        !          1349:         }
        !          1350:     }
        !          1351: 
        !          1352:     if (csr0 & CSR0_RINT)          /* Receive Interrupt (packet arrived) */ 
        !          1353:     {
        !          1354:        SK_rxintr(dev); 
        !          1355:     }
        !          1356: 
        !          1357:     if (csr0 & CSR0_TINT)          /* Transmit interrupt (packet sent) */
        !          1358:     {
        !          1359:        SK_txintr(dev);
        !          1360:     }
        !          1361: 
        !          1362:     SK_write_reg(CSR0, CSR0_INEA); /* Enable Interrupts */
        !          1363: 
        !          1364:     dev->interrupt = 0;            /* We are out */
        !          1365: } /* End of SK_interrupt() */ 
        !          1366: 
        !          1367: 
        !          1368: /*-
        !          1369:  * Function       : SK_txintr
        !          1370:  * Author         : Patrick J.D. Weichmann
        !          1371:  * Date Created   : 94/05/27
        !          1372:  *
        !          1373:  * Description    : After sending a packet we check status, update
        !          1374:  *                  statistics and relinquish ownership of transmit 
        !          1375:  *                  descriptor ring.
        !          1376:  *
        !          1377:  * Parameters     : I : struct device *dev - SK_G16 device structure
        !          1378:  * Return Value   : None
        !          1379:  * Errors         : None
        !          1380:  * Globals        : None
        !          1381:  * Update History :
        !          1382:  *     YY/MM/DD  uid  Description
        !          1383: -*/
        !          1384: 
        !          1385: static void SK_txintr(struct device *dev)
        !          1386: {
        !          1387:     int tmdstat;
        !          1388:     struct tmd *tmdp;
        !          1389:     struct priv *p = (struct priv *) dev->priv;
        !          1390: 
        !          1391: 
        !          1392:     PRINTK2(("## %s: SK_txintr() status: %#06x\n", 
        !          1393:             SK_NAME, SK_read_reg(CSR0)));
        !          1394: 
        !          1395:     tmdp = p->tmdhead + p->tmdlast;     /* Which buffer we sent at last ? */
        !          1396: 
        !          1397:     /* Set next buffer */
        !          1398:     p->tmdlast++;
        !          1399:     p->tmdlast &= TMDNUM-1;
        !          1400: 
        !          1401:     tmdstat = tmdp->u.s.status & 0xff00; /* filter out status bits 15:08 */
        !          1402: 
        !          1403:     /* 
        !          1404:      * We check status of transmitted packet.
        !          1405:      * see LANCE data-sheet for error explanation
        !          1406:      */
        !          1407:     if (tmdstat & TX_ERR) /* Error occurred */
        !          1408:     {
        !          1409:        printk("%s: TX error: %04x %04x\n", dev->name, (int) tmdstat,
        !          1410:                (int) tmdp->status2);
        !          1411: 
        !          1412:        if (tmdp->status2 & TX_TDR)    /* TDR problems? */
        !          1413:        {
        !          1414:            printk("%s: tdr-problems \n", dev->name);
        !          1415:        }
        !          1416: 
        !          1417:        if (tmdp->status2 & TX_RTRY)   /* Failed in 16 attempts to transmit ? */
        !          1418:             p->stats.tx_aborted_errors++;   
        !          1419:         if (tmdp->status2 & TX_LCOL)   /* Late collision ? */
        !          1420:             p->stats.tx_window_errors++; 
        !          1421:        if (tmdp->status2 & TX_LCAR)   /* Loss of Carrier ? */  
        !          1422:             p->stats.tx_carrier_errors++;
        !          1423:         if (tmdp->status2 & TX_UFLO)   /* Underflow error ? */
        !          1424:         {
        !          1425:             p->stats.tx_fifo_errors++;
        !          1426: 
        !          1427:             /* 
        !          1428:              * If UFLO error occurs it will turn transmitter of.
        !          1429:              * So we must reinit LANCE
        !          1430:              */
        !          1431: 
        !          1432:             SK_lance_init(dev, MODE_NORMAL);
        !          1433:         }
        !          1434:        
        !          1435:        p->stats.tx_errors++;
        !          1436: 
        !          1437:        tmdp->status2 = 0;             /* Clear error flags */
        !          1438:     }
        !          1439:     else if (tmdstat & TX_MORE)        /* Collisions occurred ? */
        !          1440:     {
        !          1441:         /* 
        !          1442:          * Here I have a problem.
        !          1443:          * I only know that there must be one or up to 15 collisions.
        !          1444:          * That's why TX_MORE is set, because after 16 attempts TX_RTRY
        !          1445:          * will be set which means couldn't send packet aborted transfer.
        !          1446:          *
        !          1447:          * First I did not have this in but then I thought at minimum
        !          1448:          * we see that something was not ok.
        !          1449:          * If anyone knows something better than this to handle this
        !          1450:          * please report it. (see Email addresses in the README file)
        !          1451:          */ 
        !          1452: 
        !          1453:         p->stats.collisions++; 
        !          1454:     }
        !          1455:     else   /* Packet sent without any problems */
        !          1456:     {
        !          1457:         p->stats.tx_packets++; 
        !          1458:     }
        !          1459: 
        !          1460:     /* 
        !          1461:      * We mark transmitter not busy anymore, because now we have a free
        !          1462:      * transmit descriptor which can be filled by SK_send_packet and
        !          1463:      * afterwards sent by the LANCE
        !          1464:      */
        !          1465: 
        !          1466:     dev->tbusy = 0; 
        !          1467: 
        !          1468:     /* 
        !          1469:      * mark_bh(NET_BH);
        !          1470:      * This will cause net_bh() to run after this interrupt handler.
        !          1471:      *
        !          1472:      * The function which do handle slow IRQ parts is do_bottom_half()
        !          1473:      * which runs at normal kernel priority, that means all interrupt are
        !          1474:      * enabled. (see kernel/irq.c)
        !          1475:      *  
        !          1476:      * net_bh does something like this:
        !          1477:      *  - check if already in net_bh
        !          1478:      *  - try to transmit something from the send queue
        !          1479:      *  - if something is in the receive queue send it up to higher 
        !          1480:      *    levels if it is a known protocol
        !          1481:      *  - try to transmit something from the send queue
        !          1482:      */
        !          1483: 
        !          1484:     mark_bh(NET_BH); 
        !          1485: 
        !          1486: } /* End of SK_txintr() */
        !          1487: 
        !          1488: 
        !          1489: /*-
        !          1490:  * Function       : SK_rxintr
        !          1491:  * Author         : Patrick J.D. Weichmann
        !          1492:  * Date Created   : 94/05/27
        !          1493:  *
        !          1494:  * Description    : Buffer sent, check for errors, relinquish ownership
        !          1495:  *                  of the receive message descriptor. 
        !          1496:  *
        !          1497:  * Parameters     : I : SK_G16 device structure
        !          1498:  * Return Value   : None
        !          1499:  * Globals        : None
        !          1500:  * Update History :
        !          1501:  *     YY/MM/DD  uid  Description
        !          1502: -*/
        !          1503: 
        !          1504: static void SK_rxintr(struct device *dev)
        !          1505: {
        !          1506: 
        !          1507:     struct rmd *rmdp;
        !          1508:     int rmdstat;
        !          1509:     struct priv *p = (struct priv *) dev->priv;
        !          1510: 
        !          1511:     PRINTK2(("## %s: SK_rxintr(). CSR0: %#06x\n", 
        !          1512:             SK_NAME, SK_read_reg(CSR0)));
        !          1513: 
        !          1514:     rmdp = p->rmdhead + p->rmdnum;
        !          1515: 
        !          1516:     /* As long as we own the next entry, check status and send
        !          1517:      * it up to higher layer 
        !          1518:      */
        !          1519: 
        !          1520:     while (!( (rmdstat = rmdp->u.s.status) & RX_OWN))
        !          1521:     {
        !          1522:        /* 
        !          1523:          * Start and end of packet must be set, because we use 
        !          1524:         * the ethernet maximum packet length (1518) as buffer size.
        !          1525:         * 
        !          1526:         * Because our buffers are at maximum OFLO and BUFF errors are
        !          1527:         * not to be concerned (see Data sheet)
        !          1528:         */
        !          1529: 
        !          1530:        if ((rmdstat & (RX_STP | RX_ENP)) != (RX_STP | RX_ENP))
        !          1531:        {
        !          1532:            /* Start of a frame > 1518 Bytes ? */
        !          1533: 
        !          1534:            if (rmdstat & RX_STP) 
        !          1535:            {
        !          1536:                p->stats.rx_errors++;        /* bad packet received */
        !          1537:                p->stats.rx_length_errors++; /* packet too long */
        !          1538: 
        !          1539:                printk("%s: packet too long\n", dev->name);
        !          1540:            }
        !          1541:            
        !          1542:            /* 
        !          1543:              * All other packets will be ignored until a new frame with
        !          1544:             * start (RX_STP) set follows.
        !          1545:             * 
        !          1546:             * What we do is just give descriptor free for new incoming
        !          1547:             * packets. 
        !          1548:             */
        !          1549: 
        !          1550:            rmdp->u.s.status = RX_OWN;      /* Relinquish ownership to LANCE */ 
        !          1551: 
        !          1552:        }
        !          1553:        else if (rmdstat & RX_ERR)          /* Receive Error ? */
        !          1554:        {
        !          1555:            printk("%s: RX error: %04x\n", dev->name, (int) rmdstat);
        !          1556:            
        !          1557:            p->stats.rx_errors++;
        !          1558: 
        !          1559:            if (rmdstat & RX_FRAM) p->stats.rx_frame_errors++;
        !          1560:            if (rmdstat & RX_CRC)  p->stats.rx_crc_errors++;
        !          1561: 
        !          1562:            rmdp->u.s.status = RX_OWN;      /* Relinquish ownership to LANCE */
        !          1563: 
        !          1564:        }
        !          1565:        else /* We have a packet which can be queued for the upper layers */
        !          1566:        {
        !          1567: 
        !          1568:            int len = (rmdp->mlen & 0x0fff);  /* extract message length from receive buffer */
        !          1569:            struct sk_buff *skb;
        !          1570: 
        !          1571:            skb = dev_alloc_skb(len+2); /* allocate socket buffer */ 
        !          1572: 
        !          1573:            if (skb == NULL)                /* Could not get mem ? */
        !          1574:            {
        !          1575:     
        !          1576:                /* 
        !          1577:                  * Couldn't allocate sk_buffer so we give descriptor back
        !          1578:                 * to Lance, update statistics and go ahead.
        !          1579:                 */
        !          1580: 
        !          1581:                rmdp->u.s.status = RX_OWN;  /* Relinquish ownership to LANCE */
        !          1582:                printk("%s: Couldn't allocate sk_buff, deferring packet.\n",
        !          1583:                       dev->name);
        !          1584:                p->stats.rx_dropped++;
        !          1585: 
        !          1586:                break;                      /* Jump out */
        !          1587:            }
        !          1588:            
        !          1589:            /* Prepare sk_buff to queue for upper layers */
        !          1590: 
        !          1591:            skb->dev = dev;
        !          1592:            skb_reserve(skb,2);         /* Align IP header on 16 byte boundary */
        !          1593:            
        !          1594:            /* 
        !          1595:              * Copy data out of our receive descriptor into sk_buff.
        !          1596:             *
        !          1597:             * (rmdp->u.buffer & 0x00ffffff) -> get address of buffer and 
        !          1598:             * ignore status fields) 
        !          1599:             */
        !          1600: 
        !          1601:            memcpy(skb_put(skb,len), (unsigned char *) (rmdp->u.buffer & 0x00ffffff),
        !          1602:                   len);
        !          1603: 
        !          1604: 
        !          1605:            /* 
        !          1606:              * Notify the upper protocol layers that there is another packet
        !          1607:             * to handle
        !          1608:             *
        !          1609:             * netif_rx() always succeeds. see /net/inet/dev.c for more.
        !          1610:             */
        !          1611: 
        !          1612:            skb->protocol=eth_type_trans(skb,dev);
        !          1613:            netif_rx(skb);                 /* queue packet and mark it for processing */
        !          1614:           
        !          1615:            /* 
        !          1616:              * Packet is queued and marked for processing so we
        !          1617:             * free our descriptor and update statistics 
        !          1618:             */
        !          1619: 
        !          1620:            rmdp->u.s.status = RX_OWN;
        !          1621:            p->stats.rx_packets++;
        !          1622: 
        !          1623: 
        !          1624:            p->rmdnum++;
        !          1625:            p->rmdnum %= RMDNUM;
        !          1626: 
        !          1627:            rmdp = p->rmdhead + p->rmdnum;
        !          1628:        }
        !          1629:     }
        !          1630: } /* End of SK_rxintr() */
        !          1631: 
        !          1632: 
        !          1633: /*-
        !          1634:  * Function       : SK_close
        !          1635:  * Author         : Patrick J.D. Weichmann
        !          1636:  * Date Created   : 94/05/26
        !          1637:  *
        !          1638:  * Description    : close gets called from dev_close() and should
        !          1639:  *                  deinstall the card (free_irq, mem etc).
        !          1640:  *
        !          1641:  * Parameters     : I : struct device *dev - our device structure
        !          1642:  * Return Value   : 0 - closed device driver
        !          1643:  * Errors         : None
        !          1644:  * Globals        : None
        !          1645:  * Update History :
        !          1646:  *     YY/MM/DD  uid  Description
        !          1647: -*/
        !          1648: 
        !          1649: /* I have tried to set BOOT_ROM on and RAM off but then, after a 'ifconfig
        !          1650:  * down' the system stops. So I don't shut set card to init state.
        !          1651:  */
        !          1652: 
        !          1653: static int SK_close(struct device *dev)
        !          1654: {
        !          1655: 
        !          1656:     PRINTK(("## %s: SK_close(). CSR0: %#06x\n", 
        !          1657:            SK_NAME, SK_read_reg(CSR0)));
        !          1658: 
        !          1659:     dev->tbusy = 1;                /* Transmitter busy */
        !          1660:     dev->start = 0;                /* Card down */
        !          1661: 
        !          1662:     printk("%s: Shutting %s down CSR0 %#06x\n", dev->name, SK_NAME, 
        !          1663:            (int) SK_read_reg(CSR0));
        !          1664: 
        !          1665:     SK_write_reg(CSR0, CSR0_STOP); /* STOP the LANCE */
        !          1666: 
        !          1667:     free_irq(dev->irq, NULL);      /* Free IRQ */
        !          1668:     irq2dev_map[dev->irq] = 0;     /* Mark IRQ as unused */
        !          1669: 
        !          1670:     return 0; /* always succeed */
        !          1671:     
        !          1672: } /* End of SK_close() */
        !          1673: 
        !          1674: 
        !          1675: /*-
        !          1676:  * Function       : SK_get_stats
        !          1677:  * Author         : Patrick J.D. Weichmann
        !          1678:  * Date Created   : 94/05/26
        !          1679:  *
        !          1680:  * Description    : Return current status structure to upper layers.
        !          1681:  *                  It is called by sprintf_stats (dev.c).
        !          1682:  *
        !          1683:  * Parameters     : I : struct device *dev   - our device structure
        !          1684:  * Return Value   : struct enet_statistics * - our current statistics
        !          1685:  * Errors         : None
        !          1686:  * Side Effects   : None
        !          1687:  * Update History :
        !          1688:  *     YY/MM/DD  uid  Description
        !          1689: -*/
        !          1690: 
        !          1691: static struct enet_statistics *SK_get_stats(struct device *dev)
        !          1692: {
        !          1693: 
        !          1694:     struct priv *p = (struct priv *) dev->priv;
        !          1695: 
        !          1696:     PRINTK(("## %s: SK_get_stats(). CSR0: %#06x\n", 
        !          1697:            SK_NAME, SK_read_reg(CSR0)));
        !          1698: 
        !          1699:     return &p->stats;             /* Return Device status */
        !          1700: 
        !          1701: } /* End of SK_get_stats() */
        !          1702: 
        !          1703: 
        !          1704: /*-
        !          1705:  * Function       : set_multicast_list
        !          1706:  * Author         : Patrick J.D. Weichmann
        !          1707:  * Date Created   : 94/05/26
        !          1708:  *
        !          1709:  * Description    : This function gets called when a program performs
        !          1710:  *                  a SIOCSIFFLAGS call. Ifconfig does this if you call
        !          1711:  *                  'ifconfig [-]allmulti' which enables or disables the
        !          1712:  *                  Promiscuous mode.
        !          1713:  *                  Promiscuous mode is when the Network card accepts all
        !          1714:  *                  packets, not only the packets which match our MAC 
        !          1715:  *                  Address. It is useful for writing a network monitor,
        !          1716:  *                  but it is also a security problem. You have to remember
        !          1717:  *                  that all information on the net is not encrypted.
        !          1718:  *
        !          1719:  * Parameters     : I : struct device *dev - SK_G16 device Structure
        !          1720:  * Return Value   : None
        !          1721:  * Errors         : None
        !          1722:  * Globals        : None
        !          1723:  * Update History :
        !          1724:  *     YY/MM/DD  uid  Description
        !          1725:  *     95/10/18  ACox  New multicast calling scheme
        !          1726: -*/
        !          1727: 
        !          1728: 
        !          1729: /* Set or clear the multicast filter for SK_G16.
        !          1730:  */
        !          1731: 
        !          1732: static void set_multicast_list(struct device *dev)
        !          1733: {
        !          1734: 
        !          1735:     if (dev->flags&IFF_PROMISC)
        !          1736:     {
        !          1737:        /* Reinitialize LANCE with MODE_PROM set */
        !          1738:        SK_lance_init(dev, MODE_PROM);
        !          1739:     }
        !          1740:     else if (dev->mc_count==0 && !(dev->flags&IFF_ALLMULTI))
        !          1741:     {
        !          1742:        /* Reinitialize LANCE without MODE_PROM */
        !          1743:        SK_lance_init(dev, MODE_NORMAL);
        !          1744:     }
        !          1745:     else
        !          1746:     {
        !          1747:        /* Multicast with logical address filter on */
        !          1748:        /* Reinitialize LANCE without MODE_PROM */
        !          1749:        SK_lance_init(dev, MODE_NORMAL);
        !          1750:        
        !          1751:        /* Not implemented yet. */
        !          1752:     }
        !          1753: } /* End of set_multicast_list() */
        !          1754: 
        !          1755: 
        !          1756: 
        !          1757: /*-
        !          1758:  * Function       : SK_rom_addr
        !          1759:  * Author         : Patrick J.D. Weichmann
        !          1760:  * Date Created   : 94/06/01
        !          1761:  *
        !          1762:  * Description    : Try to find a Boot_ROM at all possible locations
        !          1763:  *
        !          1764:  * Parameters     : None
        !          1765:  * Return Value   : Address where Boot_ROM is
        !          1766:  * Errors         : 0 - Did not find Boot_ROM
        !          1767:  * Globals        : None
        !          1768:  * Update History :
        !          1769:  *     YY/MM/DD  uid  Description
        !          1770: -*/
        !          1771: 
        !          1772: unsigned int SK_rom_addr(void)
        !          1773: {
        !          1774:     int i,j;
        !          1775:     int rom_found = 0;
        !          1776:     unsigned int rom_location[] = SK_BOOT_ROM_LOCATIONS;
        !          1777:     unsigned char rom_id[] = SK_BOOT_ROM_ID;
        !          1778:     unsigned char *test_byte;
        !          1779: 
        !          1780:     /* Autodetect Boot_ROM */
        !          1781:     PRINTK(("## %s: Autodetection of Boot_ROM\n", SK_NAME));
        !          1782: 
        !          1783:     for (i = 0; (rom_location[i] != 0) && (rom_found == 0); i++)
        !          1784:     {
        !          1785:        
        !          1786:        PRINTK(("##   Trying ROM location %#08x", rom_location[i]));
        !          1787:        
        !          1788:        rom_found = 1; 
        !          1789:        for (j = 0; j < 6; j++)
        !          1790:        {
        !          1791:            test_byte = (unsigned char *) (rom_location[i]+j);
        !          1792:            PRINTK((" %02x ", *test_byte));
        !          1793: 
        !          1794:            if(!(*test_byte == rom_id[j]))
        !          1795:            {
        !          1796:                rom_found = 0;
        !          1797:            } 
        !          1798:        }
        !          1799:        PRINTK(("\n"));
        !          1800:     }
        !          1801: 
        !          1802:     if (rom_found == 1)
        !          1803:     {
        !          1804:        PRINTK(("## %s: Boot_ROM found at %#08x\n", 
        !          1805:                SK_NAME, rom_location[(i-1)]));
        !          1806: 
        !          1807:        return (rom_location[--i]);
        !          1808:     }
        !          1809:     else
        !          1810:     {
        !          1811:        PRINTK(("%s: No Boot_ROM found\n", SK_NAME));
        !          1812:        return 0;
        !          1813:     }
        !          1814: } /* End of SK_rom_addr() */
        !          1815: 
        !          1816: 
        !          1817: 
        !          1818: /* LANCE access functions 
        !          1819:  *
        !          1820:  * ! CSR1-3 can only be accessed when in CSR0 the STOP bit is set !
        !          1821:  */
        !          1822: 
        !          1823: 
        !          1824: /*-
        !          1825:  * Function       : SK_reset_board
        !          1826:  *
        !          1827:  * Author         : Patrick J.D. Weichmann
        !          1828:  *
        !          1829:  * Date Created   : 94/05/25
        !          1830:  *
        !          1831:  * Description    : This function resets SK_G16 and all components, but
        !          1832:  *                  POS registers are not changed
        !          1833:  *
        !          1834:  * Parameters     : None
        !          1835:  * Return Value   : None
        !          1836:  * Errors         : None
        !          1837:  * Globals        : SK_RAM *board - SK_RAM structure pointer
        !          1838:  *
        !          1839:  * Update History :
        !          1840:  *     YY/MM/DD  uid  Description
        !          1841: -*/
        !          1842: 
        !          1843: void SK_reset_board(void)
        !          1844: {
        !          1845:     int i;
        !          1846: 
        !          1847:     SK_PORT = 0x00;           /* Reset active */
        !          1848:     for (i = 0; i < 10 ; i++) /* Delay min 5ms */
        !          1849:        ;
        !          1850:     SK_PORT = SK_RESET;       /* Set back to normal operation */
        !          1851: 
        !          1852: } /* End of SK_reset_board() */
        !          1853: 
        !          1854: 
        !          1855: /*-
        !          1856:  * Function       : SK_set_RAP
        !          1857:  * Author         : Patrick J.D. Weichmann
        !          1858:  * Date Created   : 94/05/25
        !          1859:  *
        !          1860:  * Description    : Set LANCE Register Address Port to register
        !          1861:  *                  for later data transfer.
        !          1862:  *
        !          1863:  * Parameters     : I : reg_number - which CSR to read/write from/to
        !          1864:  * Return Value   : None
        !          1865:  * Errors         : None
        !          1866:  * Globals        : SK_RAM *board - SK_RAM structure pointer
        !          1867:  * Update History :
        !          1868:  *     YY/MM/DD  uid  Description
        !          1869: -*/
        !          1870: 
        !          1871: void SK_set_RAP(int reg_number)
        !          1872: {
        !          1873:     SK_IOREG = reg_number;
        !          1874:     SK_PORT  = SK_RESET | SK_RAP | SK_WREG;
        !          1875:     SK_IOCOM = SK_DOIO;
        !          1876: 
        !          1877:     while (SK_PORT & SK_IORUN) 
        !          1878:        ;
        !          1879: } /* End of SK_set_RAP() */
        !          1880: 
        !          1881: 
        !          1882: /*-
        !          1883:  * Function       : SK_read_reg
        !          1884:  * Author         : Patrick J.D. Weichmann
        !          1885:  * Date Created   : 94/05/25
        !          1886:  *
        !          1887:  * Description    : Set RAP and read data from a LANCE CSR register
        !          1888:  *
        !          1889:  * Parameters     : I : reg_number - which CSR to read from
        !          1890:  * Return Value   : Register contents
        !          1891:  * Errors         : None
        !          1892:  * Globals        : SK_RAM *board - SK_RAM structure pointer
        !          1893:  * Update History :
        !          1894:  *     YY/MM/DD  uid  Description
        !          1895: -*/
        !          1896: 
        !          1897: int SK_read_reg(int reg_number)
        !          1898: {
        !          1899:     SK_set_RAP(reg_number);
        !          1900: 
        !          1901:     SK_PORT  = SK_RESET | SK_RDATA | SK_RREG;
        !          1902:     SK_IOCOM = SK_DOIO;
        !          1903: 
        !          1904:     while (SK_PORT & SK_IORUN)
        !          1905:        ;
        !          1906:     return (SK_IOREG);
        !          1907: 
        !          1908: } /* End of SK_read_reg() */
        !          1909: 
        !          1910: 
        !          1911: /*-
        !          1912:  * Function       : SK_rread_reg
        !          1913:  * Author         : Patrick J.D. Weichmann
        !          1914:  * Date Created   : 94/05/28
        !          1915:  *
        !          1916:  * Description    : Read data from preseted register.
        !          1917:  *                  This function requires that you know which
        !          1918:  *                  Register is actually set. Be aware that CSR1-3
        !          1919:  *                  can only be accessed when in CSR0 STOP is set.
        !          1920:  *
        !          1921:  * Return Value   : Register contents
        !          1922:  * Errors         : None
        !          1923:  * Globals        : SK_RAM *board - SK_RAM structure pointer
        !          1924:  * Update History :
        !          1925:  *     YY/MM/DD  uid  Description
        !          1926: -*/
        !          1927: 
        !          1928: int SK_rread_reg(void)
        !          1929: {
        !          1930:     SK_PORT  = SK_RESET | SK_RDATA | SK_RREG;
        !          1931: 
        !          1932:     SK_IOCOM = SK_DOIO;
        !          1933: 
        !          1934:     while (SK_PORT & SK_IORUN)
        !          1935:        ;
        !          1936:     return (SK_IOREG);
        !          1937: 
        !          1938: } /* End of SK_rread_reg() */
        !          1939: 
        !          1940: 
        !          1941: /*-
        !          1942:  * Function       : SK_write_reg
        !          1943:  * Author         : Patrick J.D. Weichmann
        !          1944:  * Date Created   : 94/05/25
        !          1945:  *
        !          1946:  * Description    : This function sets the RAP then fills in the
        !          1947:  *                  LANCE I/O Reg and starts Transfer to LANCE.
        !          1948:  *                  It waits until transfer has ended which is max. 7 ms
        !          1949:  *                  and then it returns.
        !          1950:  *
        !          1951:  * Parameters     : I : reg_number - which CSR to write to
        !          1952:  *                  I : value      - what value to fill into register 
        !          1953:  * Return Value   : None
        !          1954:  * Errors         : None
        !          1955:  * Globals        : SK_RAM *board - SK_RAM structure pointer
        !          1956:  * Update History :
        !          1957:  *     YY/MM/DD  uid  Description
        !          1958: -*/
        !          1959: 
        !          1960: void SK_write_reg(int reg_number, int value)
        !          1961: {
        !          1962:     SK_set_RAP(reg_number);
        !          1963: 
        !          1964:     SK_IOREG = value;
        !          1965:     SK_PORT  = SK_RESET | SK_RDATA | SK_WREG;
        !          1966:     SK_IOCOM = SK_DOIO;
        !          1967: 
        !          1968:     while (SK_PORT & SK_IORUN)
        !          1969:        ;
        !          1970: } /* End of SK_write_reg */
        !          1971: 
        !          1972: 
        !          1973: 
        !          1974: /* 
        !          1975:  * Debugging functions
        !          1976:  * -------------------
        !          1977:  */
        !          1978: 
        !          1979: /*-
        !          1980:  * Function       : SK_print_pos
        !          1981:  * Author         : Patrick J.D. Weichmann
        !          1982:  * Date Created   : 94/05/25
        !          1983:  *
        !          1984:  * Description    : This function prints out the 4 POS (Programmable
        !          1985:  *                  Option Select) Registers. Used mainly to debug operation.
        !          1986:  *
        !          1987:  * Parameters     : I : struct device *dev - SK_G16 device structure
        !          1988:  *                  I : char * - Text which will be printed as title
        !          1989:  * Return Value   : None
        !          1990:  * Errors         : None
        !          1991:  * Update History :
        !          1992:  *     YY/MM/DD  uid  Description
        !          1993: -*/
        !          1994: 
        !          1995: void SK_print_pos(struct device *dev, char *text)
        !          1996: {
        !          1997:     int ioaddr = dev->base_addr;
        !          1998: 
        !          1999:     unsigned char pos0 = inb(SK_POS0),
        !          2000:                  pos1 = inb(SK_POS1),
        !          2001:                  pos2 = inb(SK_POS2),
        !          2002:                  pos3 = inb(SK_POS3),
        !          2003:                  pos4 = inb(SK_POS4);
        !          2004: 
        !          2005: 
        !          2006:     printk("## %s: %s.\n"
        !          2007:            "##   pos0=%#4x pos1=%#4x pos2=%#04x pos3=%#08x pos4=%#04x\n",
        !          2008:            SK_NAME, text, pos0, pos1, pos2, (pos3<<14), pos4);
        !          2009: 
        !          2010: } /* End of SK_print_pos() */
        !          2011: 
        !          2012: 
        !          2013: 
        !          2014: /*-
        !          2015:  * Function       : SK_print_dev
        !          2016:  * Author         : Patrick J.D. Weichmann
        !          2017:  * Date Created   : 94/05/25
        !          2018:  *
        !          2019:  * Description    : This function simply prints out the important fields
        !          2020:  *                  of the device structure.
        !          2021:  *
        !          2022:  * Parameters     : I : struct device *dev  - SK_G16 device structure
        !          2023:  *                  I : char *text - Title for printing
        !          2024:  * Return Value   : None
        !          2025:  * Errors         : None
        !          2026:  * Update History :
        !          2027:  *     YY/MM/DD  uid  Description
        !          2028: -*/
        !          2029: 
        !          2030: void SK_print_dev(struct device *dev, char *text)
        !          2031: {
        !          2032:     if (dev == NULL)
        !          2033:     {
        !          2034:        printk("## %s: Device Structure. %s\n", SK_NAME, text);
        !          2035:        printk("## DEVICE == NULL\n");
        !          2036:     }
        !          2037:     else
        !          2038:     {
        !          2039:        printk("## %s: Device Structure. %s\n", SK_NAME, text);
        !          2040:        printk("## Device Name: %s Base Address: %#06lx IRQ: %d\n", 
        !          2041:                dev->name, dev->base_addr, dev->irq);
        !          2042:               
        !          2043:        printk("##   FLAGS: start: %d tbusy: %ld int: %d\n", 
        !          2044:                dev->start, dev->tbusy, dev->interrupt);
        !          2045: 
        !          2046:        printk("## next device: %#08x init function: %#08x\n", 
        !          2047:               (int) dev->next, (int) dev->init);
        !          2048:     }
        !          2049: 
        !          2050: } /* End of SK_print_dev() */
        !          2051: 
        !          2052: 
        !          2053: 
        !          2054: /*-
        !          2055:  * Function       : SK_print_ram
        !          2056:  * Author         : Patrick J.D. Weichmann
        !          2057:  * Date Created   : 94/06/02
        !          2058:  *
        !          2059:  * Description    : This function is used to check how are things set up
        !          2060:  *                  in the 16KB RAM. Also the pointers to the receive and 
        !          2061:  *                  transmit descriptor rings and rx and tx buffers locations.
        !          2062:  *                  It contains a minor bug in printing, but has no effect to the values
        !          2063:  *                  only newlines are not correct.
        !          2064:  *
        !          2065:  * Parameters     : I : struct device *dev - SK_G16 device structure
        !          2066:  * Return Value   : None
        !          2067:  * Errors         : None
        !          2068:  * Globals        : None
        !          2069:  * Update History :
        !          2070:  *     YY/MM/DD  uid  Description
        !          2071: -*/
        !          2072: 
        !          2073: void SK_print_ram(struct device *dev)
        !          2074: {
        !          2075: 
        !          2076:     int i;    
        !          2077:     struct priv *p = (struct priv *) dev->priv;
        !          2078: 
        !          2079:     printk("## %s: RAM Details.\n"
        !          2080:            "##   RAM at %#08x tmdhead: %#08x rmdhead: %#08x initblock: %#08x\n",
        !          2081:            SK_NAME, 
        !          2082:            (unsigned int) p->ram,
        !          2083:            (unsigned int) p->tmdhead, 
        !          2084:            (unsigned int) p->rmdhead, 
        !          2085:            (unsigned int) &(p->ram)->ib);
        !          2086:            
        !          2087:     printk("##   ");
        !          2088: 
        !          2089:     for(i = 0; i < TMDNUM; i++)
        !          2090:     {
        !          2091:            if (!(i % 3)) /* Every third line do a newline */
        !          2092:            {
        !          2093:                printk("\n##   ");
        !          2094:            }
        !          2095:         printk("tmdbufs%d: %#08x ", (i+1), (int) p->tmdbufs[i]);
        !          2096:     }
        !          2097:     printk("##   ");
        !          2098: 
        !          2099:     for(i = 0; i < RMDNUM; i++)
        !          2100:     {
        !          2101:          if (!(i % 3)) /* Every third line do a newline */
        !          2102:            {
        !          2103:                printk("\n##   ");
        !          2104:            }
        !          2105:         printk("rmdbufs%d: %#08x ", (i+1), (int) p->rmdbufs[i]);
        !          2106:     } 
        !          2107:     printk("\n");
        !          2108: 
        !          2109: } /* End of SK_print_ram() */
        !          2110: 

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.