Annotation of Net2/arch/hp300/dev/grf_gb.c, revision 1.1.1.1

1.1       root        1: /*
                      2:  * Copyright (c) 1988 University of Utah.
                      3:  * Copyright (c) 1990 The Regents of the University of California.
                      4:  * All rights reserved.
                      5:  *
                      6:  * This code is derived from software contributed to Berkeley by
                      7:  * the Systems Programming Group of the University of Utah Computer
                      8:  * Science Department.
                      9:  *
                     10:  * Redistribution and use in source and binary forms, with or without
                     11:  * modification, are permitted provided that the following conditions
                     12:  * are met:
                     13:  * 1. Redistributions of source code must retain the above copyright
                     14:  *    notice, this list of conditions and the following disclaimer.
                     15:  * 2. Redistributions in binary form must reproduce the above copyright
                     16:  *    notice, this list of conditions and the following disclaimer in the
                     17:  *    documentation and/or other materials provided with the distribution.
                     18:  * 3. All advertising materials mentioning features or use of this software
                     19:  *    must display the following acknowledgement:
                     20:  *     This product includes software developed by the University of
                     21:  *     California, Berkeley and its contributors.
                     22:  * 4. Neither the name of the University nor the names of its contributors
                     23:  *    may be used to endorse or promote products derived from this software
                     24:  *    without specific prior written permission.
                     25:  *
                     26:  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
                     27:  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
                     28:  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
                     29:  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
                     30:  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
                     31:  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
                     32:  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
                     33:  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
                     34:  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
                     35:  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
                     36:  * SUCH DAMAGE.
                     37:  *
                     38:  * from: Utah $Hdr: grf_gb.c 1.16 91/04/02$
                     39:  *
                     40:  *     @(#)grf_gb.c    7.4 (Berkeley) 5/7/91
                     41:  */
                     42: 
                     43: #include "grf.h"
                     44: #if NGRF > 0
                     45: 
                     46: /*
                     47:  * Graphics routines for the Gatorbox.
                     48:  *
                     49:  * Note: In the context of this system, "gator" and "gatorbox" both refer to
                     50:  *       HP 987x0 graphics systems.  "Gator" is not used for high res mono.
                     51:  *       (as in 9837 Gator systems)
                     52:  */
                     53: #include "sys/param.h"
                     54: #include "sys/errno.h"
                     55: 
                     56: #include "grfioctl.h"
                     57: #include "grfvar.h"
                     58: #include "grf_gbreg.h"
                     59: 
                     60: #include "../include/cpu.h"
                     61: 
                     62: #define CRTC_DATA_LENGTH  0x0e
                     63: u_char crtc_init_data[CRTC_DATA_LENGTH] = {
                     64:     0x29, 0x20, 0x23, 0x04, 0x30, 0x0b, 0x30,
                     65:     0x30, 0x00, 0x0f, 0x00, 0x00, 0x00, 0x00
                     66: };
                     67: 
                     68: /*
                     69:  * Initialize hardware.
                     70:  * Must point g_display at a grfinfo structure describing the hardware.
                     71:  * Returns 0 if hardware not present, non-zero ow.
                     72:  */
                     73: gb_init(gp, addr)
                     74:        struct grf_softc *gp;
                     75:        caddr_t addr;
                     76: {
                     77:        register struct gboxfb *gbp;
                     78:        struct grfinfo *gi = &gp->g_display;
                     79:        u_char *fbp, save;
                     80:        int fboff;
                     81:        extern caddr_t sctopa(), iomap();
                     82: 
                     83:        gbp = (struct gboxfb *) addr;
                     84:        if (ISIIOVA(addr))
                     85:                gi->gd_regaddr = (caddr_t) IIOP(addr);
                     86:        else
                     87:                gi->gd_regaddr = sctopa(vatosc(addr));
                     88:        gi->gd_regsize = 0x10000;
                     89:        gi->gd_fbwidth = 1024;          /* XXX */
                     90:        gi->gd_fbheight = 1024;         /* XXX */
                     91:        gi->gd_fbsize = gi->gd_fbwidth * gi->gd_fbheight;
                     92:        fboff = (gbp->fbomsb << 8) | gbp->fbolsb;
                     93:        gi->gd_fbaddr = (caddr_t) (*((u_char *)addr + fboff) << 16);
                     94:        gp->g_regkva = addr;
                     95:        gp->g_fbkva = iomap(gi->gd_fbaddr, gi->gd_fbsize);
                     96:        gi->gd_dwidth = 1024;           /* XXX */
                     97:        gi->gd_dheight = 768;           /* XXX */
                     98:        gi->gd_planes = 0;              /* how do we do this? */
                     99:        /*
                    100:         * The minimal register info here is from the Gatorbox X driver.
                    101:         */
                    102:        fbp = (u_char *) gp->g_fbkva;
                    103:        gbp->write_protect = 0;
                    104:        gbp->interrupt = 4;             /** fb_enable ? **/
                    105:        gbp->rep_rule = 3;              /* GXcopy */
                    106:        gbp->blink1 = 0xff;
                    107:        gbp->blink2 = 0xff;
                    108: 
                    109:        gb_microcode(gbp);
                    110: 
                    111:        /*
                    112:         * Find out how many colors are available by determining
                    113:         * which planes are installed.  That is, write all ones to
                    114:         * a frame buffer location, see how many ones are read back.
                    115:         */
                    116:        save = *fbp;
                    117:        *fbp = 0xFF;
                    118:        gi->gd_colors = *fbp + 1;
                    119:        *fbp = save;
                    120:        return(1);
                    121: }
                    122: 
                    123: /*
                    124:  * Program the 6845.
                    125:  */
                    126: gb_microcode(gbp)
                    127:        register struct gboxfb *gbp;
                    128: {
                    129:        register int i;
                    130:        
                    131:        for (i = 0; i < CRTC_DATA_LENGTH; i++) {
                    132:                gbp->crtc_address = i;
                    133:                gbp->crtc_data = crtc_init_data[i];
                    134:        }
                    135: }
                    136: 
                    137: /*
                    138:  * Change the mode of the display.
                    139:  * Right now all we can do is grfon/grfoff.
                    140:  * Return a UNIX error number or 0 for success.
                    141:  */
                    142: gb_mode(gp, cmd)
                    143:        register struct grf_softc *gp;
                    144: {
                    145:        struct gboxfb *gbp;
                    146:        int error = 0;
                    147: 
                    148:        gbp = (struct gboxfb *) gp->g_regkva;
                    149:        switch (cmd) {
                    150:        case GM_GRFON:
                    151:                gbp->sec_interrupt = 1;
                    152:                break;
                    153:        case GM_GRFOFF:
                    154:                break;
                    155:        default:
                    156:                error = EINVAL;
                    157:                break;
                    158:        }
                    159:        return(error);
                    160: }
                    161: 
                    162: #endif

unix.superglobalmegacorp.com

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.