|
|
1.1 ! root 1: /* ! 2: * Copyright (c) 1982, 1986, 1988 Regents of the University of California. ! 3: * All rights reserved. ! 4: * ! 5: * Redistribution and use in source and binary forms, with or without ! 6: * modification, are permitted provided that the following conditions ! 7: * are met: ! 8: * 1. Redistributions of source code must retain the above copyright ! 9: * notice, this list of conditions and the following disclaimer. ! 10: * 2. Redistributions in binary form must reproduce the above copyright ! 11: * notice, this list of conditions and the following disclaimer in the ! 12: * documentation and/or other materials provided with the distribution. ! 13: * 3. All advertising materials mentioning features or use of this software ! 14: * must display the following acknowledgement: ! 15: * This product includes software developed by the University of ! 16: * California, Berkeley and its contributors. ! 17: * 4. Neither the name of the University nor the names of its contributors ! 18: * may be used to endorse or promote products derived from this software ! 19: * without specific prior written permission. ! 20: * ! 21: * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ! 22: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ! 23: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ! 24: * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE ! 25: * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL ! 26: * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ! 27: * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) ! 28: * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ! 29: * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ! 30: * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF ! 31: * SUCH DAMAGE. ! 32: * ! 33: * @(#)raw_ip.c 7.8 (Berkeley) 7/25/90 ! 34: */ ! 35: ! 36: #include "param.h" ! 37: #include "malloc.h" ! 38: #include "mbuf.h" ! 39: #include "socket.h" ! 40: #include "protosw.h" ! 41: #include "socketvar.h" ! 42: #include "errno.h" ! 43: ! 44: #include "../net/if.h" ! 45: #include "../net/route.h" ! 46: #include "../net/raw_cb.h" ! 47: ! 48: #include "in.h" ! 49: #include "in_systm.h" ! 50: #include "ip.h" ! 51: #include "ip_var.h" ! 52: #include "in_pcb.h" ! 53: ! 54: /* ! 55: * Raw interface to IP protocol. ! 56: */ ! 57: ! 58: struct sockaddr_in ripdst = { sizeof(ripdst), AF_INET }; ! 59: struct sockaddr_in ripsrc = { sizeof(ripsrc), AF_INET }; ! 60: struct sockproto ripproto = { PF_INET }; ! 61: /* ! 62: * Setup generic address and protocol structures ! 63: * for raw_input routine, then pass them along with ! 64: * mbuf chain. ! 65: */ ! 66: rip_input(m) ! 67: struct mbuf *m; ! 68: { ! 69: register struct ip *ip = mtod(m, struct ip *); ! 70: ! 71: ripproto.sp_protocol = ip->ip_p; ! 72: ripdst.sin_addr = ip->ip_dst; ! 73: ripsrc.sin_addr = ip->ip_src; ! 74: if (raw_input(m, &ripproto, (struct sockaddr *)&ripsrc, ! 75: (struct sockaddr *)&ripdst) == 0) { ! 76: ipstat.ips_noproto++; ! 77: ipstat.ips_delivered--; ! 78: } ! 79: } ! 80: ! 81: /* ! 82: * Generate IP header and pass packet to ip_output. ! 83: * Tack on options user may have setup with control call. ! 84: */ ! 85: #define satosin(sa) ((struct sockaddr_in *)(sa)) ! 86: rip_output(m, so) ! 87: register struct mbuf *m; ! 88: struct socket *so; ! 89: { ! 90: register struct ip *ip; ! 91: register struct raw_inpcb *rp = sotorawinpcb(so); ! 92: register struct sockaddr_in *sin; ! 93: ! 94: /* ! 95: * If the user handed us a complete IP packet, use it. ! 96: * Otherwise, allocate an mbuf for a header and fill it in. ! 97: */ ! 98: if (rp->rinp_flags & RINPF_HDRINCL) ! 99: ip = mtod(m, struct ip *); ! 100: else { ! 101: M_PREPEND(m, sizeof(struct ip), M_WAIT); ! 102: ip = mtod(m, struct ip *); ! 103: ip->ip_tos = 0; ! 104: ip->ip_off = 0; ! 105: ip->ip_p = rp->rinp_rcb.rcb_proto.sp_protocol; ! 106: ip->ip_len = m->m_pkthdr.len; ! 107: if (sin = satosin(rp->rinp_rcb.rcb_laddr)) { ! 108: ip->ip_src = sin->sin_addr; ! 109: } else ! 110: ip->ip_src.s_addr = 0; ! 111: if (sin = satosin(rp->rinp_rcb.rcb_faddr)) ! 112: ip->ip_dst = sin->sin_addr; ! 113: ip->ip_ttl = MAXTTL; ! 114: } ! 115: return (ip_output(m, ! 116: (rp->rinp_flags & RINPF_HDRINCL)? (struct mbuf *)0: rp->rinp_options, ! 117: &rp->rinp_route, ! 118: (so->so_options & SO_DONTROUTE) | IP_ALLOWBROADCAST)); ! 119: } ! 120: ! 121: /* ! 122: * Raw IP socket option processing. ! 123: */ ! 124: rip_ctloutput(op, so, level, optname, m) ! 125: int op; ! 126: struct socket *so; ! 127: int level, optname; ! 128: struct mbuf **m; ! 129: { ! 130: int error = 0; ! 131: register struct raw_inpcb *rp = sotorawinpcb(so); ! 132: ! 133: if (level != IPPROTO_IP) ! 134: error = EINVAL; ! 135: else switch (op) { ! 136: ! 137: case PRCO_SETOPT: ! 138: switch (optname) { ! 139: ! 140: case IP_OPTIONS: ! 141: return (ip_pcbopts(&rp->rinp_options, *m)); ! 142: ! 143: case IP_HDRINCL: ! 144: if (m == 0 || *m == 0 || (*m)->m_len < sizeof (int)) { ! 145: error = EINVAL; ! 146: break; ! 147: } ! 148: if (*mtod(*m, int *)) ! 149: rp->rinp_flags |= RINPF_HDRINCL; ! 150: else ! 151: rp->rinp_flags &= ~RINPF_HDRINCL; ! 152: break; ! 153: ! 154: default: ! 155: error = EINVAL; ! 156: break; ! 157: } ! 158: break; ! 159: ! 160: case PRCO_GETOPT: ! 161: *m = m_get(M_WAIT, MT_SOOPTS); ! 162: switch (optname) { ! 163: ! 164: case IP_OPTIONS: ! 165: if (rp->rinp_options) { ! 166: (*m)->m_len = rp->rinp_options->m_len; ! 167: bcopy(mtod(rp->rinp_options, caddr_t), ! 168: mtod(*m, caddr_t), (unsigned)(*m)->m_len); ! 169: } else ! 170: (*m)->m_len = 0; ! 171: break; ! 172: ! 173: case IP_HDRINCL: ! 174: (*m)->m_len = sizeof (int); ! 175: *mtod(*m, int *) = rp->rinp_flags & RINPF_HDRINCL; ! 176: break; ! 177: ! 178: default: ! 179: error = EINVAL; ! 180: m_freem(*m); ! 181: *m = 0; ! 182: break; ! 183: } ! 184: break; ! 185: } ! 186: if (op == PRCO_SETOPT && *m) ! 187: (void)m_free(*m); ! 188: return (error); ! 189: } ! 190: ! 191: /*ARGSUSED*/ ! 192: rip_usrreq(so, req, m, nam, rights, control) ! 193: register struct socket *so; ! 194: int req; ! 195: struct mbuf *m, *nam, *rights, *control; ! 196: { ! 197: register int error = 0; ! 198: register struct raw_inpcb *rp = sotorawinpcb(so); ! 199: ! 200: switch (req) { ! 201: ! 202: case PRU_ATTACH: ! 203: if (rp) ! 204: panic("rip_attach"); ! 205: MALLOC(rp, struct raw_inpcb *, sizeof *rp, M_PCB, M_WAITOK); ! 206: if (rp == 0) ! 207: return (ENOBUFS); ! 208: bzero((caddr_t)rp, sizeof *rp); ! 209: so->so_pcb = (caddr_t)rp; ! 210: break; ! 211: ! 212: case PRU_DETACH: ! 213: if (rp == 0) ! 214: panic("rip_detach"); ! 215: if (rp->rinp_options) ! 216: m_freem(rp->rinp_options); ! 217: if (rp->rinp_route.ro_rt) ! 218: RTFREE(rp->rinp_route.ro_rt); ! 219: if (rp->rinp_rcb.rcb_laddr) ! 220: rp->rinp_rcb.rcb_laddr = 0; ! 221: break; ! 222: ! 223: case PRU_BIND: ! 224: { ! 225: struct sockaddr_in *addr = mtod(nam, struct sockaddr_in *); ! 226: ! 227: if (nam->m_len != sizeof(*addr)) ! 228: return (EINVAL); ! 229: if ((ifnet == 0) || ! 230: ((addr->sin_family != AF_INET) && ! 231: (addr->sin_family != AF_IMPLINK)) || ! 232: (addr->sin_addr.s_addr && ! 233: ifa_ifwithaddr((struct sockaddr *)addr) == 0)) ! 234: return (EADDRNOTAVAIL); ! 235: rp->rinp_rcb.rcb_laddr = (struct sockaddr *)&rp->rinp_laddr; ! 236: rp->rinp_laddr = *addr; ! 237: return (0); ! 238: } ! 239: case PRU_CONNECT: ! 240: { ! 241: struct sockaddr_in *addr = mtod(nam, struct sockaddr_in *); ! 242: ! 243: if (nam->m_len != sizeof(*addr)) ! 244: return (EINVAL); ! 245: if (ifnet == 0) ! 246: return (EADDRNOTAVAIL); ! 247: if ((addr->sin_family != AF_INET) && ! 248: (addr->sin_family != AF_IMPLINK)) ! 249: return (EAFNOSUPPORT); ! 250: rp->rinp_rcb.rcb_faddr = (struct sockaddr *)&rp->rinp_faddr; ! 251: rp->rinp_faddr = *addr; ! 252: soisconnected(so); ! 253: return (0); ! 254: } ! 255: } ! 256: error = raw_usrreq(so, req, m, nam, rights, control); ! 257: ! 258: if (error && (req == PRU_ATTACH) && so->so_pcb) ! 259: free(so->so_pcb, M_PCB); ! 260: return (error); ! 261: }
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.