Annotation of XNU/bsd/net/bpf.h, revision 1.1.1.1

1.1       root        1: /*
                      2:  * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
                      3:  *
                      4:  * @APPLE_LICENSE_HEADER_START@
                      5:  * 
                      6:  * The contents of this file constitute Original Code as defined in and
                      7:  * are subject to the Apple Public Source License Version 1.1 (the
                      8:  * "License").  You may not use this file except in compliance with the
                      9:  * License.  Please obtain a copy of the License at
                     10:  * http://www.apple.com/publicsource and read it before using this file.
                     11:  * 
                     12:  * This Original Code and all software distributed under the License are
                     13:  * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER
                     14:  * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
                     15:  * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
                     16:  * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Please see the
                     17:  * License for the specific language governing rights and limitations
                     18:  * under the License.
                     19:  * 
                     20:  * @APPLE_LICENSE_HEADER_END@
                     21:  */
                     22: /*
                     23:  * Copyright (c) 1990, 1991, 1993
                     24:  *     The Regents of the University of California.  All rights reserved.
                     25:  *
                     26:  * This code is derived from the Stanford/CMU enet packet filter,
                     27:  * (net/enet.c) distributed as part of 4.3BSD, and code contributed
                     28:  * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
                     29:  * Berkeley Laboratory.
                     30:  *
                     31:  * Redistribution and use in source and binary forms, with or without
                     32:  * modification, are permitted provided that the following conditions
                     33:  * are met:
                     34:  * 1. Redistributions of source code must retain the above copyright
                     35:  *    notice, this list of conditions and the following disclaimer.
                     36:  * 2. Redistributions in binary form must reproduce the above copyright
                     37:  *    notice, this list of conditions and the following disclaimer in the
                     38:  *    documentation and/or other materials provided with the distribution.
                     39:  * 3. All advertising materials mentioning features or use of this software
                     40:  *    must display the following acknowledgement:
                     41:  *     This product includes software developed by the University of
                     42:  *     California, Berkeley and its contributors.
                     43:  * 4. Neither the name of the University nor the names of its contributors
                     44:  *    may be used to endorse or promote products derived from this software
                     45:  *    without specific prior written permission.
                     46:  *
                     47:  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
                     48:  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
                     49:  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
                     50:  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
                     51:  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
                     52:  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
                     53:  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
                     54:  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
                     55:  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
                     56:  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
                     57:  * SUCH DAMAGE.
                     58:  *
                     59:  *      @(#)bpf.h      8.1 (Berkeley) 6/10/93
                     60:  *     @(#)bpf.h       1.34 (LBL)     6/16/96
                     61:  *
                     62:  */
                     63: 
                     64: #ifndef _NET_BPF_H_
                     65: #define _NET_BPF_H_
                     66: 
                     67: /* BSD style release date */
                     68: #define        BPF_RELEASE 199606
                     69: 
                     70: typedef        int32_t   bpf_int32;
                     71: typedef        u_int32_t bpf_u_int32;
                     72: 
                     73: /*
                     74:  * Alignment macros.  BPF_WORDALIGN rounds up to the next
                     75:  * even multiple of BPF_ALIGNMENT.
                     76:  */
                     77: #define BPF_ALIGNMENT sizeof(long)
                     78: #define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1))
                     79: 
                     80: #define BPF_MAXINSNS 512
                     81: #define BPF_MAXBUFSIZE 0x8000
                     82: #define BPF_MINBUFSIZE 32
                     83: 
                     84: 
                     85: /*
                     86:  *  Structure for BIOCSETF.
                     87:  */
                     88: struct bpf_program {
                     89:        u_int bf_len;
                     90:        struct bpf_insn *bf_insns;
                     91: };
                     92: 
                     93: /*
                     94:  * Struct returned by BIOCGSTATS.
                     95:  */
                     96: struct bpf_stat {
                     97:        u_int bs_recv;          /* number of packets received */
                     98:        u_int bs_drop;          /* number of packets dropped */
                     99: };
                    100: 
                    101: /*
                    102:  * Struct return by BIOCVERSION.  This represents the version number of
                    103:  * the filter language described by the instruction encodings below.
                    104:  * bpf understands a program iff kernel_major == filter_major &&
                    105:  * kernel_minor >= filter_minor, that is, if the value returned by the
                    106:  * running kernel has the same major number and a minor number equal
                    107:  * equal to or less than the filter being downloaded.  Otherwise, the
                    108:  * results are undefined, meaning an error may be returned or packets
                    109:  * may be accepted haphazardly.
                    110:  * It has nothing to do with the source code version.
                    111:  */
                    112: struct bpf_version {
                    113:        u_short bv_major;
                    114:        u_short bv_minor;
                    115: };
                    116: /* Current version number of filter architecture. */
                    117: #define BPF_MAJOR_VERSION 1
                    118: #define BPF_MINOR_VERSION 1
                    119: 
                    120: #define        BIOCGBLEN       _IOR('B',102, u_int)
                    121: #define        BIOCSBLEN       _IOWR('B',102, u_int)
                    122: #define        BIOCSETF        _IOW('B',103, struct bpf_program)
                    123: #define        BIOCFLUSH       _IO('B',104)
                    124: #define BIOCPROMISC    _IO('B',105)
                    125: #define        BIOCGDLT        _IOR('B',106, u_int)
                    126: #define BIOCGETIF      _IOR('B',107, struct ifreq)
                    127: #define BIOCSETIF      _IOW('B',108, struct ifreq)
                    128: #define BIOCSRTIMEOUT  _IOW('B',109, struct timeval)
                    129: #define BIOCGRTIMEOUT  _IOR('B',110, struct timeval)
                    130: #define BIOCGSTATS     _IOR('B',111, struct bpf_stat)
                    131: #define BIOCIMMEDIATE  _IOW('B',112, u_int)
                    132: #define BIOCVERSION    _IOR('B',113, struct bpf_version)
                    133: #define BIOCGRSIG      _IOR('B',114, u_int)
                    134: #define BIOCSRSIG      _IOW('B',115, u_int)
                    135: 
                    136: /*
                    137:  * Structure prepended to each packet.
                    138:  */
                    139: struct bpf_hdr {
                    140:        struct timeval  bh_tstamp;      /* time stamp */
                    141:        bpf_u_int32     bh_caplen;      /* length of captured portion */
                    142:        bpf_u_int32     bh_datalen;     /* original length of packet */
                    143:        u_short         bh_hdrlen;      /* length of bpf header (this struct
                    144:                                           plus alignment padding) */
                    145: };
                    146: /*
                    147:  * Because the structure above is not a multiple of 4 bytes, some compilers
                    148:  * will insist on inserting padding; hence, sizeof(struct bpf_hdr) won't work.
                    149:  * Only the kernel needs to know about it; applications use bh_hdrlen.
                    150:  */
                    151: #ifdef KERNEL
                    152: #define        SIZEOF_BPF_HDR  (sizeof(struct bpf_hdr) <= 20 ? 18 : \
                    153:     sizeof(struct bpf_hdr))
                    154: #endif
                    155: 
                    156: /*
                    157:  * Data-link level type codes.
                    158:  */
                    159: #define DLT_NULL       0       /* no link-layer encapsulation */
                    160: #define DLT_EN10MB     1       /* Ethernet (10Mb) */
                    161: #define DLT_EN3MB      2       /* Experimental Ethernet (3Mb) */
                    162: #define DLT_AX25       3       /* Amateur Radio AX.25 */
                    163: #define DLT_PRONET     4       /* Proteon ProNET Token Ring */
                    164: #define DLT_CHAOS      5       /* Chaos */
                    165: #define DLT_IEEE802    6       /* IEEE 802 Networks */
                    166: #define DLT_ARCNET     7       /* ARCNET */
                    167: #define DLT_SLIP       8       /* Serial Line IP */
                    168: #define DLT_PPP                9       /* Point-to-point Protocol */
                    169: #define DLT_FDDI       10      /* FDDI */
                    170: #define DLT_ATM_RFC1483        11      /* LLC/SNAP encapsulated atm */
                    171: #define DLT_RAW                12      /* raw IP */
                    172: #define DLT_SLIP_BSDOS 13      /* BSD/OS Serial Line IP */
                    173: #define DLT_PPP_BSDOS  14      /* BSD/OS Point-to-point Protocol */
                    174: 
                    175: /*
                    176:  * The instruction encodings.
                    177:  */
                    178: /* instruction classes */
                    179: #define BPF_CLASS(code) ((code) & 0x07)
                    180: #define                BPF_LD          0x00
                    181: #define                BPF_LDX         0x01
                    182: #define                BPF_ST          0x02
                    183: #define                BPF_STX         0x03
                    184: #define                BPF_ALU         0x04
                    185: #define                BPF_JMP         0x05
                    186: #define                BPF_RET         0x06
                    187: #define                BPF_MISC        0x07
                    188: 
                    189: /* ld/ldx fields */
                    190: #define BPF_SIZE(code) ((code) & 0x18)
                    191: #define                BPF_W           0x00
                    192: #define                BPF_H           0x08
                    193: #define                BPF_B           0x10
                    194: #define BPF_MODE(code) ((code) & 0xe0)
                    195: #define                BPF_IMM         0x00
                    196: #define                BPF_ABS         0x20
                    197: #define                BPF_IND         0x40
                    198: #define                BPF_MEM         0x60
                    199: #define                BPF_LEN         0x80
                    200: #define                BPF_MSH         0xa0
                    201: 
                    202: /* alu/jmp fields */
                    203: #define BPF_OP(code)   ((code) & 0xf0)
                    204: #define                BPF_ADD         0x00
                    205: #define                BPF_SUB         0x10
                    206: #define                BPF_MUL         0x20
                    207: #define                BPF_DIV         0x30
                    208: #define                BPF_OR          0x40
                    209: #define                BPF_AND         0x50
                    210: #define                BPF_LSH         0x60
                    211: #define                BPF_RSH         0x70
                    212: #define                BPF_NEG         0x80
                    213: #define                BPF_JA          0x00
                    214: #define                BPF_JEQ         0x10
                    215: #define                BPF_JGT         0x20
                    216: #define                BPF_JGE         0x30
                    217: #define                BPF_JSET        0x40
                    218: #define BPF_SRC(code)  ((code) & 0x08)
                    219: #define                BPF_K           0x00
                    220: #define                BPF_X           0x08
                    221: 
                    222: /* ret - BPF_K and BPF_X also apply */
                    223: #define BPF_RVAL(code) ((code) & 0x18)
                    224: #define                BPF_A           0x10
                    225: 
                    226: /* misc */
                    227: #define BPF_MISCOP(code) ((code) & 0xf8)
                    228: #define                BPF_TAX         0x00
                    229: #define                BPF_TXA         0x80
                    230: 
                    231: /*
                    232:  * The instruction data structure.
                    233:  */
                    234: struct bpf_insn {
                    235:        u_short         code;
                    236:        u_char          jt;
                    237:        u_char          jf;
                    238:        bpf_u_int32     k;
                    239: };
                    240: 
                    241: /*
                    242:  * Macros for insn array initializers.
                    243:  */
                    244: #define BPF_STMT(code, k) { (u_short)(code), 0, 0, k }
                    245: #define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k }
                    246: 
                    247: #ifdef KERNEL
                    248: int     bpf_validate __P((struct bpf_insn *, int));
                    249: void    bpf_tap __P((struct ifnet *, u_char *, u_int));
                    250: void    bpf_mtap __P((struct ifnet *, struct mbuf *));
                    251: void    bpfattach __P(( struct ifnet *, u_int, u_int));
                    252: void    bpfilterattach __P((int));
                    253: u_int   bpf_filter __P((struct bpf_insn *, u_char *, u_int, u_int));
                    254: #endif
                    255: 
                    256: /*
                    257:  * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST).
                    258:  */
                    259: #define BPF_MEMWORDS 16
                    260: 
                    261: #define BPF_TAP(x, y, z) bpf_tap(x,y,z) 
                    262: #define BPF_MTAP(x, y) bpf_mtap(x, y)
                    263: #endif

unix.superglobalmegacorp.com

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.