![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to pmutables.h CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [Apple XNU] / XNU / iokit / Drivers / platform / drvApplePMU|
Return to pmutables.h CVS log | Up to [Apple XNU] / XNU / iokit / Drivers / platform / drvApplePMU |
1.1 ! root 1: /* ! 2: * Copyright (c) 1998-2000 Apple Computer, Inc. All rights reserved. ! 3: * ! 4: * @APPLE_LICENSE_HEADER_START@ ! 5: * ! 6: * The contents of this file constitute Original Code as defined in and ! 7: * are subject to the Apple Public Source License Version 1.1 (the ! 8: * "License"). You may not use this file except in compliance with the ! 9: * License. Please obtain a copy of the License at ! 10: * http://www.apple.com/publicsource and read it before using this file. ! 11: * ! 12: * This Original Code and all software distributed under the License are ! 13: * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER ! 14: * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, ! 15: * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, ! 16: * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. Please see the ! 17: * License for the specific language governing rights and limitations ! 18: * under the License. ! 19: * ! 20: * @APPLE_LICENSE_HEADER_END@ ! 21: */ ! 22: ! 23: static SInt8 cmdLengthTable[256] = { ! 24: -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1, // 0x00 - 0x0F ! 25: // 0x10 - 0x1F ! 26: 1, // 0x10 Subsystem Power/Clock Control ! 27: 1, // 0x11 Subsystem Power/Clock Control (yet more) ! 28: -1,-1,-1,-1,-1,-1, // 0x12 - 0x17 ! 29: 0, // 0x18 Read Power/Clock Status ! 30: 0, // 0x19 Read Power/Clock Status (yet more) ! 31: -1,-1,-1,-1,-1, // 0x1A ! 32: 0, // 0x1F RESERVED FOR MSC/PG&E EMULATION ! 33: // 0x20 - 0x2F ! 34: -1, // 0x20 Set New Apple Desktop Bus Command ! 35: 0, // 0x21 ADB Autopoll Abort ! 36: 2, // 0x22 ADB Set Keyboard Addresses ! 37: 1, // 0x23 ADB Set Hang Threshold ! 38: 1, // 0x24 ADB Enable/Disable Programmers Key ! 39: -1,-1,-1, // 0x25 ! 40: 0, // 0x28 ADB Transaction Read ! 41: -1,-1,-1,-1,-1,-1,-1, // 0x29 ! 42: // 0x30 - 0x3F ! 43: 4, // 0x30 Set Realtime Clock. ! 44: 20, // 0x31 Write Parameter RAM ! 45: -1, // 0x32 Write Extended Parameter RAM. ! 46: 3, // 0x33 Write NVRAM ! 47: -1,-1,-1,-1, // 0x34 ! 48: 0, // 0x38 Read Realtime Clock. ! 49: 0, // 0x39 Read Parameter RAM ! 50: 2, // 0x3A Read Extended Parameter RAM. ! 51: 2, // 0x3B Read NVRAM ! 52: -1,-1,-1,-1, // 0x3C ! 53: // 0x40 - 0x4F ! 54: 1, // 0x40 Set Screen Contrast ! 55: 1, // 0x41 Set Screen Brightness ! 56: -1,-1,-1,-1,-1,-1, // 0x42 ! 57: 0, // 0x48 Read Screen Contrast ! 58: 0, // 0x49 Read Screen Brightness ! 59: -1,-1, // 0x4A ! 60: 1, // 0x4C PCMCIA card eject ! 61: -1,-1,-1, // 0x4D ! 62: // 0x50 - 0x5F ! 63: 1, // 0x50 Set Internal Modem Control Bits ! 64: 0, // 0x51 Clear FIFOs ! 65: 2, // 0x52 Set FIFO Interrupt Marks ! 66: 2, // 0x53 Set FIFO Sizes ! 67: -1, // 0x54 Write Data to Modem ! 68: 1, // 0x55 Set Data Mode ! 69: 3, // 0x56 Set Flow Control Mode ! 70: 1, // 0x57 Set DAA control lines ! 71: 0, // 0x58 Read Internal Modem Status ! 72: 1, // 0x59 Get DAA Identification ! 73: 0, // 0x5A Get FIFO Counts ! 74: 0, // 0x5B Get Maximum FIFO Sizes ! 75: 0, // 0x5C Read Data From Modem ! 76: -1, // 0x5D General Purpose modem command (modem dependent) ! 77: -1,-1, // 0x5E ! 78: // 0x60 - 0x6F ! 79: 2, // 0x60 Set low power warning and cutoff levels ! 80: -1, // 0x61 ! 81: 2, // 0x62 Set low power first dialog and 10 second warning levels ! 82: 0, // 0x63 Get low power first dialog and 10 second warning levels ! 83: -1,-1,-1,-1, // 0x64 ! 84: 0, // 0x68 Read Charger State, Battery Voltage, Temperature ! 85: 0, // 0x69 Read Instantaneous Charger, Battery, Temperature ! 86: 0, // 0x6A Read low power warning and cutoff levels ! 87: 0, // 0x6B Read Extended Battery Status ! 88: 0, // 0x6C Read Battery ID ! 89: 0, // 0x6D Battery Parameters ! 90: -1,-1, // 0x6E ! 91: // 0x70 - 0x7F ! 92: 1, // 0x70 Set One-Second Interrupt ! 93: 1, // 0x71 Modem Interrupt Control ! 94: 1, // 0x72 Set Modem Interrupt ! 95: -1,-1,-1,-1,-1, // 0x73 ! 96: 0, // 0x78 Read Interrupt Flag Register. ! 97: 0, // 0x79 Read Modem Interrupt Data ! 98: -1,-1,-1,-1, // 0x7A ! 99: 4, // 0x7E Enter Shutdown Mode ! 100: 4, // 0x7F Enter Sleep Mode ! 101: // 0x80 - 0x8F ! 102: 4, // 0x80 Set Wakeup Timer ! 103: -1, // 0x81 ! 104: 0, // 0x82 Disable Wakeup Timer ! 105: -1,-1,-1,-1,-1, // 0x83 ! 106: 0, // 0x88 Read Wakeup Timer ! 107: -1,-1,-1,-1,-1,-1,-1,// 0x89 ! 108: // 0x90 - 0x9F ! 109: 1, // 0x90 Set Sound Control Bits ! 110: 2, // 0x91 Set DFAC Control Register ! 111: -1,-1,-1,-1,-1,-1, // 0x92 ! 112: 0, // 0x98 Read Sound Control Status ! 113: 0, // 0x99 Read DFAC Control Register ! 114: -1,-1,-1,-1,-1,-1, // 0x9A ! 115: // 0xA0 - 0xAF ! 116: 2, // 0xA0 Write Modem Register ! 117: 2, // 0xA1 Clear Modem Register Bits ! 118: 2, // 0xA2 Set Modem Register Bits ! 119: 4, // 0xA3 Write DSP RAM ! 120: -1, // 0xA4 Set Filter Coefficients ! 121: 0, // 0xA5 Reset Modem ! 122: -1,-1, // 0xA6 ! 123: 1, // 0xA8 Read Modem Register ! 124: 1, // 0xA9 Send Break ! 125: 3, // 0xAA Dial Digit ! 126: 2, // 0xAB Read DSP RAM ! 127: -1,-1,-1,-1, // 0xAC ! 128: -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1, // 0xB0 - 0xBF ! 129: -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1, // 0xC0 - 0xCF ! 130: // 0xD0 - 0xDF ! 131: 0, // 0xD0 Reset CPU ! 132: -1,-1,-1,-1,-1,-1,-1, // 0xD1 ! 133: 1, // 0xD8 Read A/D Status ! 134: 1, // 0xD9 Read User Input ! 135: -1,-1, // 0xDA ! 136: 0, // 0xDC read external switches ! 137: 0, // 0xDD - ! 138: -1,-1, // 0xDE ! 139: // 0xE0 - 0xEF ! 140: -1, // 0xE0 Write to internal PMGR memory ! 141: 4, // 0xE1 Download Flash EEPROM Code ! 142: 0, // 0xE2 Get Flash EEPROM Status ! 143: -1,-1,-1,-1,-1, // 0xE3 ! 144: 3, // 0xE8 Read PMGR internal memory ! 145: -1, // 0xE9 - ! 146: 0, // 0xEA Read PMGR firmware version number ! 147: -1, // 0xEB - ! 148: 0, // 0xEC Execute self test ! 149: -1, // 0xED PMGR diagnostics (selector-based) ! 150: -1, // 0xEE - ! 151: 0, // 0xEF PMGR soft reset ! 152: // 0xF0 - 0xFF ! 153: -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 ! 154: }; ! 155: ! 156: ! 157: ! 158: // This table is used to determine how to handle the reply: ! 159: ! 160: //=0:no reply should be expected. ! 161: //=1: only a reply byte will be sent (this is a special case for a couple of commands) ! 162: //<0:a reply is expected and the PMGR will send a count byte. ! 163: //>1:a reply is expected and the PMGR will not send a count byte, ! 164: //but the count will be (value-1). ! 165: // ! 166: //Unused commands in the range $x8 to $xF will be marked as expecting a reply (with count) ! 167: //so that commands may be added without having to change the ROM. ! 168: ! 169: static SInt8 rspLengthTable[256] = { ! 170: // 0x00 - 0x0F ! 171: 0,0,0,0,0,0,0,0, // 0x00 - ! 172: -1,-1,-1,-1,-1,-1,-1,-1, // 0x08 - ! 173: // 0x10 - 0x1F ! 174: 0, // 0x10 Subsystem Power/Clock Control ! 175: 0, // 0x11 Subsystem Power/Clock Control (yet more) ! 176: 0,0,0,0,0,0, // 0x12 - ! 177: 1+1, // 0x18 Read Power/Clock Status ! 178: 1+1, // 0x19 Read Power/Clock Status (yet more) ! 179: -1,-1,-1,-1,-1, // 0x1A - ! 180: 0, // 0x1F RESERVED FOR MSC/PG&E EMULATION ! 181: // 0x20 - 0x2F ! 182: 0, // 0x20 Set New Apple Desktop Bus Command ! 183: 0, // 0x21 ADB Autopoll Abort ! 184: 0, // 0x22 ADB Set Keyboard Addresses ! 185: 0, // 0x23 ADB Set Hang Threshold ! 186: 0, // 0x24 ADB Enable/Disable Programmers Key ! 187: 0,0,0, // 0x25 - ! 188: -1, // 0x28 ADB Transaction Read ! 189: -1,-1,-1,-1,-1,-1,-1, // 0x29 - ! 190: // 0x30 - 0x3F ! 191: 0, // 0x30 Set Realtime Clock. ! 192: 0, // 0x31 Write Parameter RAM ! 193: 0, // 0x32 Write Extended Parameter RAM. ! 194: 0, // 0x33 Write NVRAM ! 195: 0,0,0,0, // 0x34 - ! 196: 4+1, // 0x38 Read Realtime Clock. ! 197: 20+1, // 0x39 Read Parameter RAM ! 198: -1, // 0x3A Read Extended Parameter RAM. ! 199: 1+1, // 0x3B Read NVRAM ! 200: -1,-1,-1,-1, // 0x3C - ! 201: // 0x40 - 0x4F ! 202: 0, // 0x40 Set Screen Contrast ! 203: 0, // 0x41 Set Screen Brightness ! 204: 0,0,0,0,0,0, // 0x42 - ! 205: 1+1, // 0x48 Read Screen Contrast ! 206: 1+1, // 0x49 Read Screen Brightness ! 207: -1,-1, // 0x4A - ! 208: 0, // 0x4C PCMCIA card eject ! 209: -1,-1,-1, // 0x4D - ! 210: // 0x50 - 0x5F ! 211: 0, // 0x50 Set Internal Modem Control Bits ! 212: 0, // 0x51 Clear FIFOs ! 213: 0, // 0x52 Set FIFO Interrupt Marks ! 214: 0, // 0x53 Set FIFO Sizes ! 215: 0, // 0x54 Write Data to Modem ! 216: 0, // 0x55 Set Data Mode ! 217: 0, // 0x56 Set Flow Control Mode ! 218: 0, // 0x57 Set DAA control lines ! 219: 1+1, // 0x58 Read Internal Modem Status ! 220: 0, // 0x59 Get DAA Identification ! 221: 2+1, // 0x5A Get FIFO Counts ! 222: 2+1, // 0x5B Get Maximum FIFO Sizes ! 223: -1, // 0x5C Read Data From Modem ! 224: -1, // 0x5D General Purpose modem command (modem dependent) ! 225: -1,-1, // 0x5E - ! 226: // 0x60 - 0x6F ! 227: 0, // 0x60 Set low power warning and cutoff levels ! 228: 0, // 0x61 - ! 229: 0, // 0x62 Set low power first dialog and 10 second warning levels ! 230: 2+1, // 0x63 Get low power first dialog and 10 second warning levels ! 231: 0,0,0,0, // 0x64 - ! 232: 3+1, // 0x68 Read Charger State, Battery Voltage, Temperature ! 233: 3+1, // 0x69 Read Instantaneous Charger, Battery, Temperature ! 234: 2+1, // 0x6A Read low power warning and cutoff levels ! 235: 8+1, // 0x6B Read Extended Battery Status ! 236: -1, // 0x6C Read Battery ID ! 237: -1, // 0x6D Battery Parameters (10+1 for AJ, 22+1 for Malcolm) ! 238: -1,-1, // 0x6E - ! 239: // 0x70 - 0x7F ! 240: 0, // 0x70 Set One-Second Interrupt ! 241: 0, // 0x71 Modem Interrupt Control ! 242: 0, // 0x72 Set Modem Interrupt ! 243: 0,0,0,0,0, // 0x73 - ! 244: -1, // 0x78 Read Interrupt Flag Register. ! 245: -1, // 0x79 Read Modem Interrupt Data ! 246: -1,-1,-1,-1, // 0x7A - ! 247: 0+1, // 0x7E Enter Shutdown Mode ! 248: 0+1, // 0x7F Enter Sleep Mode ! 249: // 0x80 - 0x8F ! 250: 0, // 0x80 Set Wakeup Timer ! 251: 0, // 0x81 - ! 252: 0, // 0x82 Disable Wakeup Timer ! 253: 0,0,0,0,0, // 0x83 - ! 254: 5+1, // 0x88 Read Wakeup Timer ! 255: -1,-1,-1,-1,-1,-1,-1, // 0x89 - ! 256: // 0x90 - 0x9F ! 257: 0, // 0x90 Set Sound Control Bits ! 258: 0, // 0x91 Set DFAC Control Register ! 259: 0,0,0,0,0,0, // 0x92 - ! 260: 1+1, // 0x98 Read Sound Control Status ! 261: 1+1, // 0x99 Read DFAC Control Register ! 262: 1,-1,-1,-1,-1,-1, // 0x9A - ! 263: // 0xA0 - 0xAF ! 264: 0, // 0xA0 Write Modem Register ! 265: 0, // 0xA1 Clear Modem Register Bits ! 266: 0, // 0xA2 Set Modem Register Bits ! 267: 0, // 0xA3 Write DSP RAM ! 268: 0, // 0xA4 Set Filter Coefficients ! 269: 0, // 0xA5 Reset Modem ! 270: 0,0, // 0xA6 - ! 271: 1+1, // 0xA8 Read Modem Register ! 272: 0, // 0xA9 Send Break ! 273: 0, // 0xAA Dial Digit ! 274: 0, // 0xAB Read DSP RAM ! 275: -1,-1,-1,-1, // 0xAC - ! 276: // 0xB0 - 0xBF ! 277: 0,0,0,0,0,0,0,0, // 0xB0 - ! 278: -1,-1,-1,-1,-1,-1,-1,-1, // 0xB8 - ! 279: // 0xC0 - 0xCF ! 280: 0,0,0,0,0,0,0,0, // 0xC0 - ! 281: -1,-1,-1,-1,-1,-1,-1,-1, // 0xC8 - ! 282: // 0xD0 - 0xDF ! 283: 0,0,0,0,0,0,0,0, // 0xD0 Reset CPU ! 284: 1+1, // 0xD8 Read A/D Status ! 285: 1+1, // 0xD9 Read User Input ! 286: -1,-1, // 0xDA - ! 287: 1+1, // 0xDC read external switches ! 288: -1,-1,-1, // 0xDD - ! 289: // 0xE0 - 0xEF ! 290: 0, // 0xE0 Write to internal PMGR memory ! 291: 0, // 0xE1 Download Flash EEPROM Code ! 292: 0+1, // 0xE2 Get Flash EEPROM Status ! 293: 0,0,0,0,0, // 0xE3 - ! 294: -1, // 0xE8 Read PMGR internal memory ! 295: -1, // 0xE9 - ! 296: 1+1, // 0xEA Read PMGR firmware version number ! 297: -1, // 0xEB - ! 298: -1, // 0xEC Execute self test ! 299: -1, // 0xED PMGR diagnostics (selector-based) ! 300: -1, // 0xEE - ! 301: 0, // 0xEF PMGR soft reset ! 302: // 0xF0 - 0xFF ! 303: 0,0,0,0,0,0,0,0, // 0xF0 - ! 304: -1,-1,-1,-1,-1,-1,-1,-1 // 0xF8 - ! 305: }; ! 306: ! 307:
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.