|
|
1.1 root 1: .TH DEVCOPY 8S "15 Nov 1984"
2: .UC 4
3: .SH NAME
4: devcopy \- copies one file system to another - standalone utility
5: .SH SYNOPSIS
6: .B devcopy
7: .br
8: .SH DESCRIPTION
9: .I Devcopy
10: will copy one file system or tape file to another. A file
11: system (tape file) is defined by
12: a three letter device name, a drive number, and a disk partition number
13: (tape file number). For example, fsd(0,0) means disk type fsd,
14: drive number 0,
15: partition number 0, and cyp(0,1) means Cypher tape, drive number 0,
16: file number 1.
17: .SH USER INTERFACE
18: .nf
19: Boot
20: devcopy <CR>
21: Source device :
22: (enter the source file system, like fsd(0,0) or cyp(0,0))
23: Copy to device
24: (enter the output file system, as above)
25: Number of blocks
26: (make sure it is big enough to get to the end)
27: .fi
28: .PP
29: .I Devcopy
30: copies fixed size 1K byte blocks, and
31: reports progress every 500 blocks. At the end,
32: it displays the number of blocks copied:
33: .nf
34: Total of ## blocks copied
35: .fi
36:
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.