|
|
1.1 ! root 1: .TH FASTCOPY 8S "15 Nov 1984" ! 2: .UC 4 ! 3: .SH NAME ! 4: fastcopy \- copies one file system to another - standalone utility ! 5: .SH SYNOPSIS ! 6: .B fastcopy ! 7: .br ! 8: .SH DESCRIPTION ! 9: .I Fastcopy ! 10: will copy one file system or tape file to another. A file ! 11: system (tape file) is defined by ! 12: a three letter device name, a drive number, and a disk partition number ! 13: (tape file number). For example, fsd(0,0) means disk type fsd, ! 14: drive number 0, ! 15: partition number 0, and cyp(0,1) means Cypher tape, drive number 0, ! 16: file number 1. ! 17: .SH USER INTERFACE ! 18: .nf ! 19: Boot ! 20: fastcopy <CR> ! 21: Source device : ! 22: (enter the source file system, like fsd(0,0) or cyp(0,0)) ! 23: Copy to device ! 24: (enter the output file system, as above) ! 25: Number of blocks ! 26: (make sure it is big enough to get to the end) ! 27: .fi ! 28: .PP ! 29: .I Fastcopy ! 30: determines and displays the source block size: ! 31: .nf ! 32: Block size from input = 10 kbytes ! 33: .fi ! 34: and then reports progress every 100 blocks. ! 35: At the end, ! 36: .I fastcopy ! 37: prints the number of blocks copied: ! 38: .nf ! 39: Total of ## blocks copied ! 40: .fi ! 41:
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.