![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to README.hypervisor CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [Dynamips Cisco Emulator] / cf|
Return to README.hypervisor CVS log | Up to [Dynamips Cisco Emulator] / cf |
1.1 root 1: Description of the hypervisor mode
2: ==================================
3:
4: The hypervisor mode of dynamips allows you to run simultaneously
5: many virtual router instances, and to simulate ATM, Ethernet
6: or Frame-Relay networks.
7:
8: Running dynamips in hypervisor mode
9: ===================================
10:
1.1.1.2 ! root 11: dynamips -H [<ip_address>:]<tcp_port>
1.1 root 12:
13: Managing the hypervisor
14: =======================
15:
16: You can connect directly to the TCP control port with telnet, or use
17: dynagen/dynagui that will pass commands transparently. The second method
18: is highly recommended.
19:
20: The command syntax is simple: <module> <function> [arguments...]
21: For example: "c7200 start R1" starts virtual instance named "R1".
22:
23: The modules that are currently defined are given below:
24:
25: * hypervisor : General hypervisor management
26: * vm : General virtual machine (VM) management
27: * c7200 : Virtual instances of Cisco 7200
28: * c3600 : Virtual instances of Cisco 3600
29: * nio : Network Input/Output (NIO) descriptors
30: * nio_bridge : NIO bridges (shared media)
31: * atmsw : ATM switches
32: * frsw : Frame-Relay switches
33: * ethsw : Ethernet switches
34:
35:
36: Hypervisor management module ("hypervisor")
37: ============================================
38:
39: * "hypervisor module_list" : Display the module list.
40:
41: * "hypervisor cmd_list <module>" : Display commands recognized by the
42: specified module.
43:
44: * "hypervisor close" : Close the current session.
45:
46: * "hypervisor stop" : Destroy all objects and stop hypervisor.
47:
48: * "hypervisor reset" : Destroy all objects (used to get an empty
49: configuration)
50:
51: * "hypervisor working_dir <directory>" : Set the directory to use to store
52: files.
53:
54: * "hypervisor save_config <filename>" : Save the configuration of all objects
55: into the specified file.
56:
57:
58: Virtual Machine module ("vm")
59: =============================
60:
61: * "vm list" : List all VM instances (c7200, c3600).
62:
63: * "vm set_debug_level <instance_name> <level>" : Set the debug level
64: (which is a number) for a VM. By default, no specific debug is enabled
65: (level = 0).
66:
67: * "vm set_ios <instance_name> <ios_file>" : Set the IOS image file to
68: use. There is no default.
69:
70: * "vm set_config <instance_name> <config_reg>" : Set the config register
71: value.
72:
73: * "vm set_ram <instance_name> <ram_size>" : Set the RAM size, specified
74: in Mbytes.
75:
76: * "vm set_nvram <instance_name> <nvram_size>" : Set the NVRAM size,
77: specified in Kbytes.
78:
79: * "vm set_ram_mmap <instance_name> <0|1>" : Enable/Disable use
80: of a mapped file to simulate router memory. By default, a mapped file
81: is used. This is a bit slower, but requires less memory.
82:
83: * "vm suspend <instance_name>" : Suspend execution of the instance.
84:
85: * "vm resume <instance_name>" : Resume execution of the instance.
86:
87: * "vm set_clock_divisor <instance_name> <clock_div>" : Set the clock
88: divisor value. The higher is the value, the faster is the clock in the
89: virtual machine. The default is 4, but it is often required to adjust it.
90:
91: * "vm set_idle_pc <instance_name> <pc_value>" : Set the idle Pointer
92: Counter (PC). You must determine it through the method explained in the
93: main README file.
94:
95: * "vm set_exec_area <instance_name> <area_size>" : Set the exec area
96: size. The exec area is a pool of host memory used to store pages
97: translated by the JIT (they contain the native code corresponding to MIPS
98: code pages).
99:
100: * "vm set_disk0 <instance_name> <value>" : Set size of PCMCIA ATA disk0.
101:
102: * "vm set_disk1 <instance_name> <value>" : Set size of PCMCIA ATA disk1.
103:
104: * "vm set_conf_reg <instance_name> <value>" : Set the config register
105: value. The default is 0x2102.
106:
107: * "vm set_con_tcp_port <instance_name> <tcp_port>" : Set the TCP port
108: to use for console. By default, no TCP port is chosen, meaning that you
109: cannot get access to the console.
110:
111: * "vm set_aux_tcp_port <instance_name> <tcp_port>" : Set the TCP port
112: to use for AUX port. By default, no TCP port is chosen, meaning that you
113: cannot get access to the AUX port.
114:
115: * "vm cpu_info <instance_name> <cpu_id>" : Show info about the CPU identified
116: by "cpu_id". The boot CPU (which is typically the only CPU) has ID 0.
117:
118:
119: Virtual Cisco 7200 instances module ("c7200")
120: ==============================================
121:
122: * "c7200 list" : List all existing Cisco 7200 instances.
123:
124: * "c7200 create <instance_name> <instance_id>" : Create a new router
125: instance. The ID must be unique and is used to name files on disk.
126:
127: * "c7200 delete <instance_name>" : Delete the specified instance.
128:
129: * "c7200 start <instance_name>" : Start the instance.
130: At least the IOS image must be set.
131:
132: * "c7200 stop <instance_name>" : Stop the instance. The settings are kept.
133:
134: * "c7200 set_npe <instance_name> <npe_name>" : Set the NPE model.
135: For example: npe-100, npe-400, ... The default is "npe-200".
136:
137: * "c7200 set_midplane <instance_name> <midplane_name>" : Set the midplane
138: model, it can be either "std" or "vxr". The default is "vxr".
139:
140: * "c7200 set_mac_addr <instance_name> <mac_addr>" : Set the base MAC
141: address of the router. By default, the address is automatically generated
142: with this pattern : ca<instance_id>.<process_pid>.0000 (Cisco format).
143:
144: * "c7200 add_pa_binding <instance_name> <slot> <pa_type>" : Add a
145: Port Adapter binding for the specified slot.
146: For example: "c7200 add_pa_binding R1 1 PA-A1" adds a PA-A1 card into
147: slot 1.
148:
149: * "c7200 remove_pa_binding <instance_name> <slot>" : Remove a Port Adapter
150: binding (if it exists) for the specified slot.
151:
152: * "c7200 pa_bindings <instance_name>" : Display all PA bindings for the
153: router instance.
154:
155: * "c7200 add_nio_binding <instance_name> <slot> <port> <nio_name>":
156: Add a NIO binding for the interface designated by "slot/port".
157: For example: "c7200 add_nio_binding R1 1 0 nio1" (with PA-A1 bound
158: to slot 1) binds the NIO called "nio1" to the interface ATM1/0.
159:
160: * "c7200 remove_nio_binding <instance_name> <slot> <port>":
161: Removes the NIO binding for the interface designated by "slot/port".
162:
163: * "c7200 pa_nio_bindings <instance_name> <slot>": Display NIO bindings
164: for all ports of the specified slot.
165:
166: * "c7200 pa_enable_nio <instance_name> <slot> <port>" : Enable NIO for
167: the interface "slot/port" (used when NIO has to be changed while the
168: virtual router is online).
169:
170: * "c7200 pa_disable_nio <instance_name> <slot> <port>" : Disable NIO for
171: the interface "slot/port" (used when NIO has to be changed while the
172: virtual router is online).
173:
174: * "c7200 pa_init_online <instance_name> <slot>" : Initialize a Port
175: Adapter while the router is online (this triggers an OIR event).
176:
177: * "c7200 pa_stop_online <instance_name> <slot>" : Stop a Port
178: Adapter while the router is online (this triggers an OIR event).
179:
180: * "c7200 show_hardware <instance_name>" : Display virtual hardware info
181: about the instance.
182:
183:
184: Virtual Cisco 3600 instances module ("c3600")
185: ==============================================
186:
187: * "c3600 list" : List all existing Cisco 3600 instances.
188:
189: * "c3600 create <instance_name> <instance_id>" : Create a new router
190: instance. The ID must be unique and is used to name files on disk.
191:
192: * "c3600 delete <instance_name>" : Delete the specified instance.
193:
194: * "c3600 start <instance_name>" : Start the instance.
195: At least the IOS image must be set.
196:
197: * "c3600 stop <instance_name>" : Stop the instance. The settings are kept.
198:
199: * "c3600 set_chassis <instance_name> <chassis_name>" : Set the chassis model.
200: Possible values: 3620, 3640, 3660. The default is "3640".
201:
202: * "c3600 set_mac_addr <instance_name> <mac_addr>" : Set the base MAC
203: address of the router. By default, the address is automatically generated
204: with this pattern : cc<instance_id>.<process_pid>.0000 (Cisco format).
205:
206: * "c3600 add_nm_binding <instance_name> <slot> <pa_type>" : Add a
207: Network Module binding for the specified slot.
208: For example: "c3600 add_nm_binding R1 1 NM-1FE-TX" adds a NM-1FE-TX card
209: into slot 1.
210:
211: * "c3600 remove_pa_binding <instance_name> <slot>" : Remove a Network Module
212: binding (if it exists) for the specified slot.
213:
214: * "c3600 nm_bindings <instance_name>" : Display all NM bindings for the
215: router instance.
216:
217: * "c3600 add_nio_binding <instance_name> <slot> <port> <nio_name>":
218: Add a NIO binding for the interface designated by "slot/port".
219: For example: "c3600 add_nio_binding R1 1 0 nio1" (with NM-1FE-TX bound
220: to slot 1) binds the NIO called "nio1" to the interface FastEthernet1/0.
221:
222: * "c3600 remove_nio_binding <instance_name> <slot> <port>":
223: Removes the NIO binding for the interface designated by "slot/port".
224:
225: * "c3600 nm_nio_bindings <instance_name> <slot>": Display NIO bindings
226: for all ports of the specified slot.
227:
228: * "c3600 nm_enable_nio <instance_name> <slot> <port>" : Enable NIO for
229: the interface "slot/port" (used when NIO has to be changed while the
230: virtual router is online).
231:
232: * "c3600 nm_disable_nio <instance_name> <slot> <port>" : Disable NIO for
233: the interface "slot/port" (used when NIO has to be changed while the
234: virtual router is online).
235:
236: * "c3600 show_hardware <instance_name>" : Display virtual hardware info
237: about the instance.
238:
239:
240: Network Input/Output (NIO) module ("nio")
241: ==========================================
242:
243: * "nio list" : List all exiting NIOs.
244:
245: * "nio create_udp <nio_name> <local_port> <remote_host> <remote_port>" :
246: Create an UDP NIO with the specified parameters.
247:
248: * "nio create_unix <nio_name> <local_file> <remote_file>" :
249: Create an UNIX NIO with the specified parameters.
250:
251: * "nio create_vde <nio_name> <control_file> <local_file>" :
252: Create a VDE NIO with the specified parameters. VDE stands for "Virtual
253: Distributed Ethernet" and is compatible with UML (User-Mode-Linux) switch.
254:
255: * "nio create_tap <nio_name> <tap_device>" : Create a TAP NIO. TAP devices
256: are supported only on Linux and FreeBSD and require root access.
257:
258: * "nio create_gen_eth <nio_name> <eth_device>" : Create a generic ethernet
259: NIO, using PCAP (0.9.4 and greater). It requires root access.
260:
261: * "nio create_linux_eth <nio_name> <eth_device>" : Create a Linux ethernet
262: NIO. It requires root access and is supported only on Linux platforms.
263:
264: * "nio delete <nio_name>" : Delete the specified NIO. The NIO can be deleted
265: only when it is not anymore in use by another object.
266:
267: * "nio set_debug <nio_name> <debug>" : Enable/Disable debugging for the
268: specified NIO. When debugging is enabled, received and emitted packets are
269: displayed at screen. It is mainly used to debug interface drivers.
270:
271:
272: NIO bridge mdoule ("nio_bridge")
273: =================================
274:
275: * "nio_bridge list" : List all NIO bridges.
276:
277: * "nio_bridge create <bridge_name>" : Create a NIO bridge. A NIO bridge
278: acts as a shared media (a kind of hub).
279:
280: * "nio_bridge delete <bridge_name>" : Delete a NIO bridge.
281:
282: * "nio_bridge add_nio <bridge_name> <nio_name>" : Add a NIO as new port
283: in a NIO bridge. The NIO must be created through the "nio" module.
284:
285: * "nio_bridge remove_nio <bridge_name> <nio_name>" : Remove the specified
286: NIO as member of the NIO bridge.
287:
288:
289: Virtual Ethernet switch ("ethsw")
290: ==================================
291:
292: * "ethsw list" : List all Ethernet switches.
293:
294: * "ethsw create <switch_name>" : Create a new Ethernet switch.
295:
296: * "ethsw delete <switch_name>" : Delete the specified Ethernet switch.
297:
298: * "ethsw add_nio <switch_name> <nio_name>" : Add a NIO as new port in an
299: Ethernet switch. The NIO must be created through the "nio" module.
300:
301: * "ethsw remove_nio <switch_name> <nio_name>" : Remove the specified NIO
302: as member of the Ethernet switch.
303:
304: * "ethsw set_access_port <switch_name> <nio_name> <vlan_id>" :
305: Set the specified port as an ACCESS port in VLAN <vlan_id>.
306:
307: * "ethsw set_dot1q_port <switch_name> <nio_name> <native_vlan>" :
308: Set the specified port as a 802.1Q trunk port, with native
309: VLAN <native_vlan>.
310:
311: * "ethsw clear_mac_addr_table <switch_name>" : Clear the MAC address table.
312:
313: * "ethsw show_mac_addr_table <switch_name>" : Show the MAC address table
314: (output format: Ethernet address, VLAN, NIO)
315:
316:
317: Virtual ATM switch ("atmsw")
318: =============================
319:
320: * "atmsw list" : List all ATM switches.
321:
322: * "atmsw create <switch_name>" : Create a new ATM switch.
323:
324: * "atmsw delete <switch_name>" : Delete the specified ATM switch.
325:
326: * "atmsw create_vpc <switch_name> <input_nio> <input_vpi>
327: <output_nio> <output_vpi>" :
328: Create a new Virtual Path connection (unidirectional).
329:
330: * "atmsw delete_vpc <switch_name> <input_nio> <input_vpi>
331: <output_nio> <output_vpi>" :
332: Delete a Virtual Path connection (unidirectional).
333:
334: * "atmsw create_vcc <switch_name> <input_nio> <input_vpi> <input_vci>
335: <output_nio> <output_vpi> <output_vci>" :
336: Create a new Virtual Channel connection (unidirectional).
337:
338: * "atmsw delete_vcc <switch_name> <input_nio> <input_vpi> <input_vci>
339: <output_nio> <output_vpi> <output_vci>" :
340: Delete a Virtual Channel connection (unidirectional).
341:
342:
343: Virtual Frame-Relay switch ("frsw")
344: ====================================
345:
346: * "frsw list" : List all Frame-Relay switches.
347:
348: * "frsw create <switch_name>" : Create a new Frame-Relay switch.
349:
350: * "frsw delete <switch_name>" : Delete the specified Frame-Relay switch.
351:
352: * "frsw create_vc <switch_name> <input_nio> <input_dlci>
353: <output_nio> <output_dlci>" :
354: Create a new Virtual Circuit connection (unidirectional).
355:
356: * "frsw delete_vc <switch_name> <input_nio> <input_dlci>
357: <output_nio> <output_dlci>" :
358: Delete a Virtual Circuit connection (unidirectional).
359:
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.