|
|
coherent
/* * Configurable information for "hai" (Adaptec, tape support) device driver. */ #define __KERNEL__ 1 #include "conf.h" /* * Patchable bit maps * Bit n is 1 in HAI_DISK if there is a hard disk at SCSI ID n. * Bit n is 1 in HAI_TAPE if there is a tape at SCSI ID n. */ int HAI_DISK = 0; int HAI_TAPE = 0; /* * Adaptec 154x configuration (factory defaults shown). * * AHABASE = 0x330; Port Base. * AHAINTR = 11; Host Adapter Interrupt vector. * AHADMACHAN = 0x05; DMA Channel. */ unsigned short AHABASE = 0x330; unsigned short AHAINTR = 11; unsigned short AHADMACHAN = 0x05; /* * Number of heads and sectors per track are translation mode, and fixed * in the BIOS, so do not differ among attached drives. Defaults shown. * * HAI_SD_HDS = 64; number of heads on a drive (translation mode). * If initialized zero, use BIOS values or default to 64. * HAI_SD_SPT = 32; number of sectors per track (translation mode). * If initialized zero, use BIOS values or default to 32. */ int HAI_SD_HDS = 64; int HAI_SD_SPT = 32;
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.