![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to asy.c CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [MW Coherent from dump] / coherent / b / kernel / io.386|
Return to asy.c CVS log | Up to [MW Coherent from dump] / coherent / b / kernel / io.386 |
coherent
/*
* File: asy.c
*
* Purpose: 8250-family async port device driver
*
* Devices are named /dev/asy[00..31]{fpl}
* Minor number bit assignments:
* x... .... 1 for NO modem control, "l"
* .x.. .... 1 for polled operation (no irq service), "p"
* ..x. .... 1 for RTS/CTS flow control, "f"
* ...x xxxx channel number - 0..31
*/
/*
* -----------------------------------------------------------------
* Includes.
*/
#include <sys/coherent.h>
#include <sys/stat.h>
#include <sys/proc.h>
#include <sys/tty.h>
#include <sys/con.h>
#include <sys/devices.h>
#include <errno.h>
#include <poll.h>
#include <sys/sched.h> /* CVTTOUT, IVTTOUT, SVTTOUT */
#include <sys/asy.h>
#include <sys/ins8250.h>
#include <sys/poll_clk.h>
#ifdef _I386
#include <termio.h>
#endif
/*
* -----------------------------------------------------------------
* Definitions.
* Constants.
* Macros with argument lists.
* Typedefs.
* Enums.
*/
#define IEN_USE_MSI (IE_RxI | IE_TxI | IE_LSI | IE_MSI)
#define IEN_NO_MSI (IE_RxI | IE_TxI | IE_LSI)
#define CTLQ 0021
#define CTLS 0023
#define NUM_IRQ 16 /* PC allows irq numbers 0..15 */
#define BPB 8 /* 8 bits per byte */
#define DTRTMOUT 3 /* DTR seconds for close */
#define LOOP_LIMIT 100 /* safety valve on irq loops */
/*
* For rawin silo (see poll_clk.h), use last element of si_buf to count
* the number of characters in the silo.
*/
#define SILO_CHAR_COUNT si_buf[SI_BUFSIZ-1]
#define SILO_HIGH_MARK (SI_BUFSIZ-SI_BUFSIZ/4)
#define SILO_LOW_MARK (SI_BUFSIZ/4)
#define MAX_SILO_INDEX (SI_BUFSIZ-2)
#define MAX_SILO_CHARS (SI_BUFSIZ-1)
#define RAWIN_FLUSH(in_silo) { \
in_silo->si_ox = in_silo->si_ix; \
in_silo->SILO_CHAR_COUNT = 0; }
#define RAWOUT_FLUSH(out_silo) { out_silo->si_ox = out_silo->si_ix; }
#define channel(dev) (dev & 0x1F)
#define IEN ((a0->a_nms)?IEN_NO_MSI:IEN_USE_MSI)
#ifdef _I386
#define EEBUSY EBUSY
#else
#define EEBUSY EDBUSY
#endif
#define NW_OUTSILO 1 /* bits in need_wake[] entries */
typedef void (* VPTR)(); /* pointer to function returning void */
typedef void (* FPTR)(); /* pointer to function returning int */
/*
* -----------------------------------------------------------------
* Functions.
* Import Functions.
* Export Functions.
* Local Functions.
*/
int nulldev();
void asy_putchar();
/*
* Configuration functions (local).
*/
static void asyclose();
static void asyioctl();
static void asyload();
static void asyopen();
static void asyread();
static void asytimer();
static void asyunload();
static void asywrite();
static int asypoll();
static void cinit();
/*
* Support functions (local).
*/
static void add_irq();
static void asy_irq();
static int asy_send();
static void asybreak();
static void asyclock();
static void asycycle();
static void asydump();
static int asyintr();
static void asyparam();
static void asysph();
static void asyspr();
static void asystart();
static void endbrk();
static void irqdummy();
static void upd_irq1();
static void i2(),i3(),i4(),i5(),i6(),i7(),i8(),i9();
static void i10(),i11(),i12(),i13(),i14(),i15();
static int p1(),p2(),p3(),p4();
/*
* -----------------------------------------------------------------
* Global Data.
* Import Variables.
* Export Variables.
* Local Variables.
*/
extern int albaud[], alp_rate[];
/*
* When asypatch runs, it checks whether its internal value for
* ASY_VERSION matches this driver's value, so as to prevent the patch
* utility and the driver from getting out of phase.
*/
int ASY_VER = ASY_VERSION;
int ASY_HPCL = 1;
int ASY_NUM = 0;
int ASYGP_NUM = 0;
asy0_t asy0[MAX_ASY] = {
{ 0 }
};
asy_gp_t asy_gp[MAX_ASYGP] = {
{ 0 }
};
static asy1_t * asy1; /* unused entries have type US_NONE */
static short dummy_port; /* used only during driver startup */
static int poll_divisor; /* set by asyspr(), read by asyclk() */
static char pptbl[MAX_ASY]; /* channel numbers of polled ports */
static int ppnum; /* number of channels in pptbl */
/*
* itbl keeps function pointers for irq service routines, for ease of setting
* and clearing vectors.
*
* irq0[x] and irq1[x] are lists for irq number x.
* irq0 has nodes that may possibly cause an irq.
* irq1 contains nodes for active devices.
* Whenever a device becomes active or inactive, irq1 is rebuilt from irq0.
*
* nodespace is an array of available nodes used in making the lists.
* nextnode points to the next free node.
* Nodes are taken from nodespace only during driver load.
*/
static VPTR itbl[NUM_IRQ] = {
0,0,i2,i3,i4,i5,i6,i7,i8,i9,i10,i11,i12,i13,i14,i15 };
static FPTR ptbl[PT_MAX] = { asyintr,p1,p2,p3,p4 };
static struct irqnode *irq0[NUM_IRQ], *irq1[NUM_IRQ];
static struct irqnode nodespace[MAX_ASY];
static char need_wake[MAX_ASY];
static char nextnode;
static int initialized; /* for asy_putchar() */
/*
* Configuration table (export data).
*/
CON asycon ={
DFCHR|DFPOL, /* Flags */
ASY_MAJOR, /* Major index */
asyopen, /* Open */
asyclose, /* Close */
nulldev, /* Block */
asyread, /* Read */
asywrite, /* Write */
asyioctl, /* Ioctl */
nulldev, /* Powerfail */
asytimer, /* Timeout */
asyload, /* Load */
asyunload, /* Unload */
asypoll /* Poll */
};
/*
* -----------------------------------------------------------------
* Code.
*/
/*
* asyload()
*/
static void
asyload()
{
int s, chan;
asy0_t *a0;
asy1_t *a1;
TTY *tp;
short port;
char irq;
char speed;
char g;
char sense_ct = 0;
/*
* Allocate space for asy structs. Possible error return.
*/
asy1 = (asy1_t *)kalloc(ASY_NUM * sizeof(asy1_t));
if (asy1 == 0) {
printf("asyload: can't allocate space for %d async devices\n",
ASY_NUM);
return;
}
kclear(asy1, ASY_NUM*sizeof(asy1_t));
/*
* For each non-null port:
* if port is uses irq
* set dummy routine in case uart_sense causes bogus irpts
* sense chip type
* write baud rate to sgtty/termio structs
* disable port interrupts
* hang up port
* set default baud rate (also resets UART)
* hook "start" function into line discipline module
* hook "param" function into line discipline module
* hook CS into line discipline module
* if port is uses irq
* release dummy routine
* if not in a port group
* add to irq list
*/
for (chan = 0; chan < ASY_NUM; chan++) {
a0 = asy0 + chan;
a1 = asy1 + chan;
tp = &a1->a_tty;
speed = a0->a_speed;
tp->t_sgttyb.sg_ispeed = tp->t_sgttyb.sg_ospeed = speed;
tp->t_dispeed = tp->t_dospeed = speed;
port = a0->a_port;
/*
* A port address of zero means a skipped entry in the table.
* In this case a1->a_ut keeps its initial value of US_NONE.
*/
if (port) {
dummy_port = port;
if (a0->a_irqno)
setivec(a0->a_irqno, irqdummy);
/*
* uart_sense() prints port info.
* Do this four times per line.
*/
a1->a_ut = uart_sense(port);
sense_ct++;
if ((sense_ct & 1) == 0)
putchar('\n');
else
putchar('\t');
s = sphi();
outb(port+MCR, 0);
outb(port+LCR, LC_DLAB);
outb(port+DLL, albaud[speed]);
outb(port+DLH, albaud[speed] >> 8);
outb(port+LCR, LC_CS8);
tp->t_start = asystart;
/* leave tp->t_param at 0 */
tp->t_cs_sel = cs_sel();
tp->t_ddp = (int *)chan;
spl(s);
if (a0->a_irqno) {
clrivec(a0->a_irqno);
if (a0->a_asy_gp == NO_ASYGP)
add_irq(a0->a_irqno, asyintr, chan);
}
}
}
if (sense_ct & 1)
putchar('\n');
/*
* for each port group
* add group to irq list
*/
for (g = 0; g < ASYGP_NUM; g++) {
add_irq(asy_gp[g].irq, ptbl[asy_gp[g].gp_type], g);
}
/*
* Attach irq routines.
*/
for (irq = 0; irq < NUM_IRQ; irq++)
if (irq0[irq]) {
setivec(irq, itbl[irq]);
}
}
/*
* asyunload()
*/
static void
asyunload()
{
char chan, irq;
/*
* for each channel
* disable UART interrupts
* hangup port
* cancel timer
*/
for (chan = 0; chan < ASY_NUM; chan++) {
asy0_t * a0 = asy0 + chan;
asy1_t * a1 = asy1 + chan;
short port = a0->a_port;
TTY *tp = &a1->a_tty;
outb(port+IER, 0);
outb(port+MCR, 0);
timeout(tp->t_rawtim, 0, NULL, 0);
}
/*
* for each irq
* if irq routine was attached
* detach it
*/
for (irq = 0; irq < NUM_IRQ; irq++)
if (irq0[irq])
clrivec(irq);
/*
* Deallocate dynamic asy storage.
*/
if (asy1)
kfree(asy1);
}
/*
* asyopen()
*/
static void
asyopen(dev, mode)
dev_t dev;
int mode;
{
int s;
char msr, mcr;
char chan = channel(dev);
asy0_t *a0 = asy0 + chan;
asy1_t *a1 = asy1 + chan;
TTY *tp = &a1->a_tty;
short port = a0->a_port;
if (a1->a_ut == US_NONE) { /* chip not found */
T_HAL(4, devmsg(dev, "no UART"));
u.u_error = ENXIO;
goto bad_open;
}
if ((tp->t_flags & T_EXCL) && !super()) {
T_HAL(4, devmsg(dev, "exclusive use"));
u.u_error = ENODEV;
goto bad_open;
}
#if 0
if (drvl[major(dev)].d_time != 0) { /* Modem settling */
T_HAL(4, devmsg(dev, "modem settling"));
u.u_error = EEBUSY;
goto bad_open;
}
#endif
/*
* Can't open for hardware flow control if modem status
* interrupts are disallowed.
*/
if (a0->a_nms && (dev & CFLOW)) {
T_HAL(4, devmsg(dev, "no modem status irq's"));
u.u_error = ENXIO;
goto bad_open;
}
/*
* Can't open a polled port if another driver is using polling.
*/
if (dev & CPOLL && poll_owner & ~ POLL_ASY) {
T_HAL(4, devmsg(dev, "polling unavailable"));
u.u_error = EEBUSY;
goto bad_open;
}
/*
* Can't have both com[13] or both com[24] IRQ at once.
*/
if (!(dev & CPOLL) && a0->a_ixc) {
struct irqnode *np = irq1[a0->a_irqno];
while (np) {
if (np->func != ptbl[0] || np->arg != chan) {
T_HAL(4, devmsg(dev, "irq conflict"));
u.u_error = EEBUSY;
goto bad_open;
}
np = np->next_actv;
}
}
/*
* If port already in use, are new and old open modes compatible?
*/
if (a1->a_in_use) {
int oldmode = 0, newmode = 0; /* mctl:1 irq:2 flow:4 */
if (a1->a_modc)
oldmode += 1;
if (a1->a_irq)
oldmode += 2;
if (a1->a_flc)
oldmode += 4;
if ((dev & NMODC) == 0)
newmode += 1;
if ((dev & CPOLL) == 0)
newmode += 2;
if (dev & CFLOW)
newmode += 4;
if (oldmode != newmode) {
T_HAL(4, devmsg(dev, "conflicting open modes"));
u.u_error = EEBUSY;
goto bad_open;
}
}
/*
* Sleep here if another process is opening or closing the port.
* This can happen if:
* another process is trying a first open and awaiting CD;
* another process is closing the port after losing CD;
* a remote process opened the port, spawned a daemon,
* and disconnected, and the daemon ignored SIGHUP and is
* improperly keeping the port open.
* Don't try to set tp->t_flags before this sleep! During
* the sleep, ttclose() may be called and clear the flags.
*/
while (a1->a_in_use && (a1->a_hcls ||
((dev & NMODC) == 0 && (inb(port+MSR) & MS_RLSD) == 0))) {
#ifdef _I386
x_sleep((char *)(&tp->t_open), pritty, slpriSigCatch, "asyblk");
#else
v_sleep((char *)(&tp->t_open), CVTTOUT, IVTTOUT, SVTTOUT,
"asyblk");
#endif
if (SELF->p_ssig && nondsig()) { /* signal? */
u.u_error = EINTR;
goto bad_open;
}
}
/*
* If channel not in use, mark it as such.
*/
if (a1->a_in_use == 0) {
/*
* Save modes for this open attempt to avoid future conflicts.
* Then start asycycle() for this port.
*/
if (dev & NMODC) {
tp->t_flags &= ~T_MODC;
a1->a_modc = 0;
} else {
tp->t_flags |= T_MODC;
a1->a_modc = 1;
}
if (dev & CPOLL)
a1->a_irq = 0;
else
a1->a_irq = 1;
if (dev & CFLOW) {
tp->t_flags |= T_CFLOW;
a1->a_flc = 1;
} else {
tp->t_flags &= ~T_CFLOW;
a1->a_flc = 0;
}
}
a1->a_in_use++;
/*
* From here, error exit is bad_open_u.
*/
if (tp->t_open == 0) { /* not already open */
silo_t * in_silo = &a1->a_in;
if (!(dev & CPOLL)) {
upd_irq1(a0->a_irqno);
a1->a_has_irq = 1;
}
/*
* Need to start cycling to scan for CD.
*/
asycycle(chan);
s = sphi();
/*
* Raise basic modem control lines even if modem
* control hasn't been specified.
* MC_OUT2 turns on NON-open-collector IRQ line from the UART.
* since we can't have two UART's on same IRQ with MC_OUT2 on
*/
mcr = MC_RTS | MC_DTR;
if (dev & CPOLL) {
outb(port+MCR, mcr);
} else {
outb(port+MCR, mcr | a0->a_outs);
outb(port+IER, IEN);
}
if ((dev & NMODC) == 0) { /* want modem control? */
tp->t_flags |= T_HOPEN | T_STOP;
for (;;) { /* wait for carrier */
msr = inb(port+MSR);
/*
* If carrier detect present
* if port not already open
* break out of loop and finish first open
* else
* do second (or third, etc.) open
*/
if (msr & MS_RLSD)
break;
/* wait for carrier */
#ifdef _I386
x_sleep((char *)(&tp->t_open), pritty,
slpriSigCatch, "need CD");
#else
v_sleep((char *)(&tp->t_open), CVTTOUT, IVTTOUT,
SVTTOUT, "need CD");
#endif
if (SELF->p_ssig && nondsig()) { /* signal? */
outb(port+MCR, 0);
outb(port+IER, 0);
u.u_error = EINTR;
tp->t_flags &= ~(T_HOPEN | T_STOP);
spl(s);
goto bad_open_u;
}
}
/*
* Mark that we are no longer hanging in open.
* Allow output over the port unless hardware flow
* control says not to.
*/
tp->t_flags &= ~T_HOPEN;
tp->t_flags &= ~T_STOP;
if (!(tp->t_flags & T_CFLOW) || (msr & MS_CTS))
a1->a_ohlt = 0;
else
a1->a_ohlt = 1;
/*
* Awaken any other opens on same device.
*/
wakeup((char *)(&tp->t_open));
}
ttopen(tp); /* stty inits */
tp->t_flags |= T_CARR;
if (ASY_HPCL)
tp->t_flags |= T_HPCL;
asyparam(tp); /* gimmick: do this while t_open is zero */
/*
* TO DO: flush UART input register(s).
*/
spl(s);
/*
* Turn on polling for the port.
*/
if (dev & CPOLL) {
a1->a_poll = 1;
asyspr();
}
} /* end of first-open case */
tp->t_open++;
T_HAL(0x400, printf("ch%d open + %d\n", chan, tp->t_open));
ttsetgrp(tp, dev, mode);
return;
bad_open_u:
a1->a_in_use--;
wakeup((char *)(&tp->t_open));
bad_open:
return;
}
/*
* asyclose()
*/
static void
asyclose(dev, mode)
dev_t dev;
int mode;
{
int chan = channel(dev);
asy0_t *a0 = asy0 + chan;
asy1_t *a1 = asy1 + chan;
TTY *tp = &a1->a_tty;
silo_t * out_silo = &a1->a_out;
silo_t * in_silo = &a1->a_in;
int flags, maj;
int s;
short port = a0->a_port;
char lsr;
if (--tp->t_open)
goto not_last_close;
T_HAL(0x400, printf("ch%d open - %d\n", chan, tp->t_open));
s = sphi();
a1->a_hcls = 1; /* disallow reopen til done closing */
flags = tp->t_flags; /* save flags - ttclose zeroes them */
ttclose(tp);
/*
* Wait for output silo and UART xmit buffer to empty.
* Allow signal to break the sleep.
*/
for (;;) {
int chipEmpty = 0, siloEmpty = 0;
lsr = inb(port + LSR);
chipEmpty = (lsr & LS_TxIDLE);
T_HAL(0x400, printf("ch%d chipEmpty=%d\n", chan, chipEmpty));
siloEmpty = (out_silo->si_ix == out_silo->si_ox);
T_HAL(0x400, printf("ch%d siloEmpty=%d\n", chan, siloEmpty));
if (chipEmpty && siloEmpty)
break;
need_wake[chan] |= NW_OUTSILO;
#ifdef _I386
x_sleep((char *)out_silo, pritty, slpriSigCatch, "asyclose");
#else
v_sleep((char *)out_silo, CVTTOUT, IVTTOUT, SVTTOUT,
"asyclose");
#endif
if (SELF->p_ssig && nondsig()) { /* signal? */
RAWOUT_FLUSH(out_silo);
break;
}
}
need_wake[chan] &= ~NW_OUTSILO;
/*
* If not hanging in open
*/
if ((flags & T_HOPEN) == 0) {
/*
* Disable interrupts.
*/
outb(port+IER, 0);
outb(port+MCR, inb(port+MCR) & ~MC_OUTS);
}
/*
* If hupcls
*/
if (flags & T_HPCL) {
T_HAL(0x400, printf("ch%d drop DTR\n", chan));
/*
* Hangup port - drop DTR and RTS.
*/
outb(port+MCR, inb(port+MCR) & MC_OUTS);
/*
* Hold dtr low for timeout
*/
maj = major(dev);
drvl[maj].d_time = 1;
#ifdef _I386
x_sleep((char *)&drvl[maj].d_time, pritty, slpriNoSig,
"drop DTR");
#else
v_sleep((char *)&drvl[maj].d_time, CVTTOUT, IVTTOUT, SVTTOUT,
"drop DTR");
#endif
drvl[maj].d_time = 0;
}
a1->a_poll = 0;
asyspr();
RAWIN_FLUSH(in_silo);
a1->a_hcls = 0; /* allow reopen - done closing */
wakeup((char *)(&tp->t_open));
spl(s);
a1->a_in_use--;
if (!(dev & CPOLL))
upd_irq1(a0->a_irqno);
return;
not_last_close:
T_HAL(0x400, printf("ch%d open - %d\n", chan, tp->t_open));
a1->a_in_use--;
wakeup((char *)(&tp->t_open));
return;
}
/*
* asyread()
*/
static void
asyread(dev, iop)
dev_t dev;
register IO * iop;
{
int chan = channel(dev);
asy1_t *a1 = asy1 + chan;
TTY *tp = &a1->a_tty;
ttread(tp, iop);
}
/*
* asytimer()
*/
static void
asytimer(dev)
dev_t dev;
{
if (++drvl[major(dev)].d_time > DTRTMOUT)
wakeup((char *)&drvl[major(dev)].d_time);
}
/*
* asywrite()
*/
static void
asywrite(dev, iop)
dev_t dev;
register IO * iop;
{
int chan = channel(dev);
asy0_t *a0 = asy0 + chan;
asy1_t *a1 = asy1 + chan;
TTY *tp = &a1->a_tty;
short port = a0->a_port;
register int c;
/*
* Treat user writes through tty driver.
*/
if (iop->io_seg != IOSYS) {
ttwrite(tp, iop);
return;
}
/*
* Treat kernel writes by blocking on transmit buffer.
*/
while ((c = iogetc(iop)) >= 0) {
/*
* Wait until transmit buffer is empty.
* Check twice to prevent critical race with interrupt handler.
*/
for (;;) {
if (inb(port+LSR) & LS_TxRDY)
if (inb(port+LSR) & LS_TxRDY)
break;
}
/*
* Output the next character.
*/
outb(port+DREG, c);
}
}
/*
* asyioctl()
*/
static void
asyioctl(dev, com, vec)
dev_t dev;
int com; struct sgttyb *vec;
{
int chan = channel(dev);
asy0_t *a0 = asy0 + chan;
asy1_t *a1 = asy1 + chan;
TTY *tp = &a1->a_tty;
int s;
int temp;
silo_t *out_silo = &a1->a_out;
silo_t *in_silo = &a1->a_in;
short port = a0->a_port;
unsigned char msr, mcr, lcr, ier;
char do_ttioctl = 0;
char do_asyparam = 0;
s = sphi();
ier = inb(port+IER);
mcr = inb(port+MCR); /* get current MCR register status */
lcr = inb(port+LCR); /* get current LCR register status */
#ifdef _I386
/*
* If command will drain output, do the drain now
* before calling ttioctl().
* Don't do this for 286 kernel: we're running out of code space.
*/
switch(com) {
case TCSETAW:
case TCSETAF:
case TCSBRK:
case TIOCSETP:
/*
* Wait for output silo and UART xmit buffer to empty.
* Allow signal to break the sleep.
*/
for (;;) {
if (!ttoutp(tp)
&& (out_silo->si_ix == out_silo->si_ox)
&& (inb(port + LSR) & LS_TxIDLE))
break;
need_wake[chan] |= NW_OUTSILO;
#ifdef _I386
x_sleep((char *)out_silo, pritty, slpriSigCatch,
"asydrain");
#else
v_sleep((char *)out_silo, CVTTOUT, IVTTOUT, SVTTOUT,
"asydrain");
#endif
if (SELF->p_ssig && nondsig()) { /* signal? */
break;
}
}
need_wake[chan] &= ~NW_OUTSILO;
}
#endif
switch(com) {
case TIOCSBRK: /* set BREAK */
outb(port+LCR, lcr|LC_SBRK);
break;
case TIOCCBRK: /* clear BREAK */
outb(port+LCR, lcr & ~LC_SBRK);
break;
case TIOCSDTR: /* set DTR */
outb(port+MCR, mcr|MC_DTR);
break;
case TIOCCDTR: /* clear DTR */
outb(port+MCR, mcr & ~MC_DTR);
break;
case TIOCSRTS: /* set RTS */
outb(port+MCR, mcr|MC_RTS);
break;
case TIOCCRTS: /* clear RTS */
outb(port+MCR, mcr & ~MC_RTS);
break;
case TIOCRSPEED: /* set "raw" I/O speed divisor */
outb(port+LCR, lcr|LC_DLAB); /* set speed latch bit */
outb(port+DLL, (unsigned) vec);
outb(port+DLH, (unsigned) vec >> 8);
outb(port+LCR, lcr); /* reset latch bit */
break;
case TIOCWORDL: /* set word length and stop bits */
outb(port+LCR, ((lcr&~0x7) | ((unsigned) vec & 0x7)));
break;
case TIOCRMSR: /* get CTS/DSR/RI/RLSD (MSR) */
msr = inb(port+MSR);
temp = msr >> 4;
kucopy(&temp, (unsigned *) vec, sizeof(unsigned));
break;
case TIOCFLUSH: /* Flush silos here, queues in tty.c */
RAWIN_FLUSH(in_silo);
RAWOUT_FLUSH(out_silo);
do_ttioctl = 1;
break;
/*
* If port parameters change, plan to call asyparam().
* Need to check now before structs are updated.
*/
#ifdef _I386
case TCSETA:
case TCSETAW:
case TCSETAF:
{
struct termio trm;
ukcopy(vec, &trm, sizeof(struct termio));
if (trm.c_cflag != tp->t_termio.c_cflag)
do_asyparam = 1;
}
do_ttioctl = 1;
break;
#endif
case TIOCSETP:
case TIOCSETN:
{
struct sgttyb sg;
ukcopy(vec, &sg, sizeof(struct sgttyb));
if (sg.sg_ispeed != tp->t_sgttyb.sg_ispeed
|| ((sg.sg_flags ^ tp->t_sgttyb.sg_flags) & ANYP))
do_asyparam = 1;
}
do_ttioctl = 1;
break;
default:
do_ttioctl = 1;
}
outb(port+IER, ier);
if (do_ttioctl)
ttioctl(tp, com, vec);
spl(s);
if (do_asyparam)
asyparam(tp);
#ifdef _I386
/*
* Things to be done after calling ttioctl().
*/
switch(com) {
case TCSBRK:
/*
* Send 0.25 second break:
* 1. Turn on break level.
* 2. Set timer to turn off break level 0.25 sec later.
* 3. Sleep till timer expires.
* 4. Turn off break level.
*/
outb(port+LCR, lcr|LC_SBRK);
a1->a_brk = 1;
timeout(&tp->t_sbrk, HZ/4, endbrk, chan);
while(a1->a_brk) {
#ifdef _I386
x_sleep(a1, pritty, slpriNoSig, "asybreak");
#else
v_sleep(a1, CVTTOUT, IVTTOUT, SVTTOUT, "asybreak");
#endif
}
outb(port+LCR, lcr & ~LC_SBRK);
}
#endif
}
#ifdef _I386
/*
* Turn off the break level.
* Called from timeout after ioctl(fd, TCSBRK, 0).
*/
void
endbrk(chan)
int chan;
{
asy1_t *a1 = asy1 + chan;
a1->a_brk = 0;
wakeup(a1);
}
#endif
/*
* asyparam()
*/
static void
asyparam(tp)
TTY * tp;
{
int chan = (int)tp->t_ddp;
asy0_t *a0 = asy0 + chan;
asy1_t *a1 = asy1 + chan;
short port = a0->a_port;
int s;
int write_baud=1, write_lcr=1;
unsigned char mcr, newlcr, speed, oldSpeed;
#ifdef _I386
unsigned short cflag = tp->t_termio.c_cflag;
T_HAL(4, printf("ch%d asyparam cflag=%x\n", chan, cflag));
speed = cflag & CBAUD;
switch (cflag & CSIZE) {
case CS5: newlcr = LC_CS5; break;
case CS6: newlcr = LC_CS6; break;
case CS7: newlcr = LC_CS7; break;
case CS8: newlcr = LC_CS8; break;
}
if (cflag & CSTOPB)
newlcr |= LC_STOPB;
if (cflag & PARENB) {
newlcr |= LC_PARENB;
if ((cflag & PARODD) == 0)
newlcr |= LC_PAREVEN;
}
#else
speed = tp->t_sgttyb.sg_ispeed;
switch (tp->t_sgttyb.sg_flags & (EVENP|ODDP|RAW)) {
case ODDP:
newlcr = LC_CS7|LC_PARENB;
break;
case EVENP:
newlcr = LC_CS7|LC_PARENB|LC_PAREVEN;
break;
default:
newlcr = LC_CS8;
break;
}
#endif
/*
* Don't bang on the UART needlessly.
* Writing baud rate resets the port, which loses characters.
* You want this on first open, NOT on later opens.
*/
oldSpeed = a0->a_speed;
if (speed == oldSpeed && tp->t_open) {
write_baud = 0;
if (newlcr == a1->a_lcr) {
write_lcr = 0;
}
}
a0->a_speed = speed;
a1->a_lcr = newlcr;
if (write_lcr) {
char ier_save;
s = sphi();
ier_save = inb(port+IER);
if (write_baud) {
if (speed) {
short divisor = albaud[speed];
if (oldSpeed == 0) {
/* if previous baud rate was zero,
* need to go off hook. */
mcr = inb(port+MCR) | (MC_RTS | MC_DTR);
outb(port+MCR, mcr);
}
T_HAL(4, printf("CH%d speed=%x\n", chan, speed));
outb(port+LCR, LC_DLAB);
outb(port+DLL, divisor);
outb(port+DLH, divisor >> 8);
} else {
/* Baud rate of zero means hang up. */
mcr = inb(port+MCR) & ~(MC_RTS | MC_DTR);
outb(port+MCR, mcr);
}
}
T_HAL(4, printf("CH%d newlcr=%x\n", chan, newlcr));
outb(port+LCR, newlcr);
if (a1->a_ut == US_16550A)
outb(port+FCR, FC_ENABLE | FC_Rx_RST | FC_Rx_08);
outb(port+IER, ier_save);
spl(s);
}
if (write_baud)
asyspr();
}
/*
* asystart()
*/
static void
asystart(tp)
TTY * tp;
{
int chan = (int)tp->t_ddp;
asy0_t *a0 = asy0 + chan;
asy1_t *a1 = asy1 + chan;
short port = a0->a_port;
int s;
int need_xmit = 1; /* True if should start sending data now. */
silo_t *out_silo = &a1->a_out;
char lsr;
/*
* Read line status register AFTER disabling interrupts.
*/
s = sphi();
lsr = inb(port + LSR);
/*
* Process break indication.
* NOTE: Break indication cleared when line status register was read.
*/
if (lsr & LS_BREAK)
defer(asybreak, chan);
/*
* If no output data, it may be time to finish closing the port;
* but won't need another xmit interrupt.
*/
if (out_silo->si_ix == out_silo->si_ox) {
if (need_wake[chan] & NW_OUTSILO) {
need_wake[chan] &= ~NW_OUTSILO;
wakeup((char *)out_silo);
}
need_xmit = 0;
}
/*
* Do nothing if output is stopped.
*/
if (tp->t_flags & T_STOP)
need_xmit = 0;
if (a1->a_ohlt)
need_xmit = 0;
/*
* Start data transmission by writing to UART xmit reg.
*/
if ((lsr & LS_TxRDY) && need_xmit) {
int xmit_count;
xmit_count = (a1->a_ut == US_16550A)?16:1;
asy_send(out_silo, port+DREG, xmit_count);
}
spl(s);
}
/*
* asypoll()
*/
static int
asypoll(dev, ev, msec)
dev_t dev;
int ev;
int msec;
{
int chan = channel(dev);
asy1_t *a1 = asy1 + chan;
TTY *tp = &a1->a_tty;
return ttpoll(tp, ev, msec);
}
/*
* asycycle()
*
* Do a wakeup of any sleeping asy's at regular intervals.
*/
static void
asycycle(chan)
int chan;
{
asy0_t *a0 = asy0 + chan;
asy1_t *a1 = asy1 + chan;
TTY *tp = &a1->a_tty;
short port = a0->a_port;
int s;
char msr, mcr;
silo_t *out_silo = &a1->a_out;
silo_t *in_silo = &a1->a_in;
int n, ch;
int do_start = 1;
unsigned char iir;
/*
* Check Carrier Detect (RLSD).
*
* Modem status interrupts were not enabled due to 8250 hardware bug.
* Enabling modem status and receive interrupts may cause lockup
* on older parts.
*/
if (tp->t_flags & T_MODC) {
/*
* Get status
*/
msr = inb(port+MSR);
/*
* Carrier changed.
*/
if ((msr & MS_RLSD) && !(tp->t_flags & T_CARR)) {
/*
* Carrier is on - wakeup open.
*/
s = sphi();
tp->t_flags |= T_CARR;
spl(s);
wakeup((char *)(&tp->t_open));
}
if (!(msr & MS_RLSD) && (tp->t_flags & T_CARR)) {
s = sphi();
RAWIN_FLUSH(in_silo);
RAWOUT_FLUSH(out_silo);
tp->t_flags &= ~T_CARR;
spl(s);
tthup(tp);
}
}
/*
* Empty raw input buffer.
*
* The line discipline module (tty.c) will set T_ISTOP true when the
* tt input queue is nearly full (tp->t_iq.cq_cc >= IHILIM), and make
* T_ISTOP false when it's ready for more input.
*
* When T_ISTOP is true, ttin() simply discards the character passed.
*/
if (!(tp->t_flags & T_ISTOP)) {
while (in_silo->SILO_CHAR_COUNT > 0) {
s = sphi();
ttin(tp, in_silo->si_buf[in_silo->si_ox]);
if (in_silo->si_ox < MAX_SILO_INDEX)
in_silo->si_ox++;
else
in_silo->si_ox = 0;
in_silo->SILO_CHAR_COUNT--;
spl(s);
}
}
/*
* Hardware flow control.
* Check CTS to see if we need to halt output.
* (MS_INTR should have done this - repeat code here to be sure)
* Check input silo to see if we need to raise RTS.
*/
if (tp->t_flags & T_CFLOW) {
/*
* Get status
*/
msr = inb(port+MSR);
s = sphi();
if (msr & MS_CTS)
a1->a_ohlt = 0;
else
a1->a_ohlt = 1;
spl(s);
T_HAL(4, {static cts = 0; if (!cts && (msr & MS_CTS)) { cts = 1; putchar('[');\
} else if (cts && !(msr & MS_CTS)) { cts = 0; putchar(']'); }});
/*
* If using hardware flow control, see if we need to drop RTS.
*/
if ((tp->t_flags & T_CFLOW)
&& (in_silo->SILO_CHAR_COUNT > SILO_HIGH_MARK)) {
s = sphi();
mcr = inb(port+MCR);
if (mcr & MC_RTS) {
outb(port+MCR, mcr & ~MC_RTS);
T_HAL(4, putchar('-'));
}
spl(s);
}
/*
* If input silo below low mark, assert RTS.
*/
if (in_silo->SILO_CHAR_COUNT <= SILO_LOW_MARK) {
s = sphi();
mcr = inb(port+MCR);
if ((mcr & MC_RTS) == 0) {
outb(port+MCR, mcr | MC_RTS);
T_HAL(4, putchar('+'));
}
spl(s);
}
}
/*
* Calculate free output slot count.
*/
n = sizeof(out_silo->si_buf) - 1;
n += out_silo->si_ox - out_silo->si_ix;
n %= sizeof(out_silo->si_buf);
/*
* Fill raw output buffer.
*/
for (;;) {
if (--n < 0)
break;
s = sphi();
ch = ttout(tp);
spl(s);
if (ch < 0)
break;
s = sphi();
out_silo->si_buf[out_silo->si_ix] = ch;
if (out_silo->si_ix >= sizeof(out_silo->si_buf) - 1)
out_silo->si_ix = 0;
else
out_silo->si_ix++;
spl(s);
}
#ifdef _I386
/*
* if port has an interrupt pending (probably missed an irq)
* the following two loops should not be merged
* - need ALL port irq's inactive at once
* for each port on this irq line (use irq1 for this)
* disable interrupts (clear IER)
* for each port on this irq line
* restore interrupts
*/
if (a1->a_has_irq && ((iir=inb(port+IIR)) & 1) == 0) {
struct irqnode *ip;
asy_gp_t *gp;
int s;
short p;
char c, slot;
T_HAL(4, printf("CH%d missed iir:x\n", chan, iir));
do_start = 0;
s = sphi();
ip = irq1[a0->a_irqno];
while(ip) {
if (ip->func == asyintr) {
p = ip->arg;
outb(p + IER, 0);
} else {
gp = asy_gp + ip->arg;
for (slot = 0; slot < MAX_SLOTS; slot++) {
if ((c=gp->chan_list[slot]) < MAX_ASY){
p = asy0[c].a_port;
outb(p + IER, 0);
}
}
}
ip = ip->next_actv;
}
/*
* Now, all ports on the offending irq line have irq off.
*/
ip = irq1[a0->a_irqno];
while(ip) {
if (ip->func == asyintr) {
p = ip->arg;
outb(p + IER, IEN);
} else {
gp = asy_gp + ip->arg;
for (slot = 0; slot < MAX_SLOTS; slot++) {
if ((c=gp->chan_list[slot]) < MAX_ASY){
p = asy0[c].a_port;
outb(p + IER, IEN);
}
}
}
ip = ip->next_actv;
}
spl(s);
}
#endif
if(do_start)
ttstart(tp);
/*
* Schedule next cycle.
*/
if (a1->a_in_use) {
timeout(&tp->t_rawtim, HZ/10, asycycle, chan);
}
}
/*
* irqdummy()
*
* Suppress interrupts that may occur during chip sensing.
*/
static void
irqdummy()
{
/*
* Try to clear all pending interrupts.
*/
inb(dummy_port+IIR);
inb(dummy_port+LSR);
inb(dummy_port+MSR);
inb(dummy_port+DREG);
}
/*
* add_irq()
*
* Given channel number, add port info to irq0 list.
*/
static void
add_irq(irq, func, arg)
int irq;
void (*func)();
int arg;
{
struct irqnode * np;
/*
* Sanity check.
*/
if (irq <=0 || irq >= NUM_IRQ || itbl[irq] == 0)
return;
if (nextnode < MAX_ASY) {
np = nodespace + nextnode++;
np->func = func;
np->arg = arg;
np->next = irq0[irq];
irq0[irq] = np;
} else {
printf("asy: too many irq nodes (%d)\n", nextnode);
}
}
/*
* Interrupt handlers.
*/
static void i2() { asy_irq(irq1[2]); }
static void i3() { asy_irq(irq1[3]); }
static void i4() { asy_irq(irq1[4]); }
static void i5() { asy_irq(irq1[5]); }
static void i6() { asy_irq(irq1[6]); }
static void i7() { asy_irq(irq1[7]); }
static void i8() { asy_irq(irq1[8]); }
static void i9() { asy_irq(irq1[9]); }
static void i10() { asy_irq(irq1[10]); }
static void i11() { asy_irq(irq1[11]); }
static void i12() { asy_irq(irq1[12]); }
static void i13() { asy_irq(irq1[13]); }
static void i14() { asy_irq(irq1[14]); }
static void i15() { asy_irq(irq1[15]); }
/*
* asy_irq()
*
* Given pointer to node list, service async interrupt.
*/
static void
asy_irq(ip)
struct irqnode * ip;
{
struct irqnode *here;
int doit;
do {
doit = 0;
here = ip;
while(here) {
doit |= (*(here->func))(here->arg);
here = here->next_actv;
}
} while(doit);
}
/*
* upd_irq1()
*
* Given an irq number, rebuild the links for active devices.
*/
static void
upd_irq1(irq)
int irq;
{
struct irqnode *np;
asy1_t *a1;
int chan;
int s;
/*
* Sanity check.
*/
if (irq <=0 || irq >= NUM_IRQ || itbl[irq] == 0)
return;
/*
* For each node in the irq0 list
* if node is for irq status port
* for each channel using the status port
* if channel in use, in irq mode
* add node to irq1 list
* skip rest of channels for this node
* else - node is for simple UART
* if channel in use, in irq mode
* add node to irq1 list
*/
s = sphi();
np = irq0[irq];
irq1[irq] = 0;
while (np) {
if (np->func != asyintr) {
char ix, loop = 1;
asy_gp_t *gp = asy_gp + np->arg;
for (ix = 0; ix < MAX_SLOTS && loop; ix++) {
if ((chan = gp->chan_list[ix]) < MAX_ASY) {
a1 = asy1 + chan;
if (a1->a_in_use && a1->a_irq) {
np->next_actv = irq1[irq];
irq1[irq] = np;
loop = 0;
}
}
}
} else {
a1 = asy1 + np->arg;
if (a1->a_in_use && a1->a_irq) {
np->next_actv = irq1[irq];
irq1[irq] = np;
}
}
np = np->next;
}
spl(s);
}
/*
* asybreak()
*/
static void
asybreak(chan)
int chan;
{
int s;
asy1_t *a1 = asy1 + chan;
silo_t *out_silo = &a1->a_out;
silo_t *in_silo = &a1->a_in;
TTY *tp = &a1->a_tty;
s = sphi();
RAWIN_FLUSH(in_silo);
RAWOUT_FLUSH(out_silo);
spl(s);
ttsignal(tp, SIGINT);
}
/*
* asyintr()
*
* Handle interrupt for a single channel.
*/
static int
asyintr(chan)
int chan;
{
asy0_t *a0 = asy0 + chan;
asy1_t *a1 = asy1 + chan;
TTY *tp = &a1->a_tty;
silo_t *out_silo = &a1->a_out;
silo_t *in_silo = &a1->a_in;
int c, xmit_count;
int ret = 0;
short port = a0->a_port;
unsigned char msr, lsr;
if (chan >= MAX_ASY) {
printf("asy: irq on channel %d\n", chan);
return 0;
}
rescan:
switch (inb(port+IIR) & 0x07) {
case LS_INTR:
ret = 1;
lsr = inb(port + LSR);
T_HAL(0x800, printf("[%d:L%x]", chan, lsr));
if (lsr & LS_BREAK)
defer(asybreak, chan);
goto rescan;
case Rx_INTR:
T_HAL(0x800, printf("[%d:R]", chan));
ret = 1;
c = inb(port+DREG);
if (tp->t_open == 0)
goto rescan;
/*
* Must recognize XOFF quickly to avoid transmit overrun.
* Recognize XON here as well to avoid race conditions.
*/
if (ISIXON) {
/*
* XON.
*/
#if _I386
if (ISSTART || (ISIXANY && ISXSTOP)) {
tp->t_flags &= ~(T_STOP | T_XSTOP);
goto rescan;
}
#else
if (ISSTART) {
tp->t_flags &= ~T_STOP;
goto rescan;
}
#endif
/*
* XOFF.
*/
if (ISSTOP) {
tp->t_flags |= T_STOP;
goto rescan;
}
}
/*
* Save char in raw input buffer.
*/
if (in_silo->SILO_CHAR_COUNT < MAX_SILO_CHARS) {
in_silo->si_buf[in_silo->si_ix] = c;
if (in_silo->si_ix < MAX_SILO_INDEX)
in_silo->si_ix++;
else
in_silo->si_ix = 0;
in_silo->SILO_CHAR_COUNT++;
}
/*
* If using hardware flow control, see if we need to drop RTS.
*/
if ((tp->t_flags & T_CFLOW)
&& (in_silo->SILO_CHAR_COUNT > SILO_HIGH_MARK)) {
unsigned char mcr = inb(port+MCR);
if (mcr & MC_RTS) {
outb(port+MCR, mcr & ~MC_RTS);
}
}
goto rescan;
case Tx_INTR:
T_HAL(0x800, printf("[%d:T]", chan));
ret = 1;
/*
* Do nothing if output is stopped.
*/
if (tp->t_flags & T_STOP) {
goto rescan;
}
if (a1->a_ohlt)
goto rescan;
/*
* Transmit next char in raw output buffer.
*/
xmit_count = (a1->a_ut == US_16550A)?16:1;
asy_send(out_silo, port+DREG, xmit_count);
goto rescan;
case MS_INTR:
ret = 1;
/*
* Get status (and clear interrupt).
*/
msr = inb(port+MSR);
T_HAL(0x800, printf("[%d:M%x]", chan, msr));
/*
* Hardware flow control.
* Check CTS to see if we need to halt output.
*/
if (tp->t_flags & T_CFLOW) {
if (msr & MS_CTS)
a1->a_ohlt = 0;
else
a1->a_ohlt = 1;
}
goto rescan;
default:
return ret;
} /* endswitch */
}
/*
* asyclk()
*
* Called every time T0 interrupts.- if it returns 0,
* the usual system timer interrupt stuff is done.
* Poll all pollable ports.
*/
static int
asyclk()
{
static int count;
int ix;
for (ix = 0; ix < ppnum; ix++)
asysph(pptbl[ix]);
count++;
if (count >= poll_divisor)
count = 0;
return count;
}
/*
* asyspr()
*
* asyspr is called when a port is opened or closed or changes speed
* It sets the polling rate only as fast as needed, and shuts off polling
* whenever possible.
* It updates the links in irq1[0], which lists polled-mode ports.
*/
static void
asyspr()
{
asy0_t *a0;
asy1_t *a1;
int chan;
int s;
int ix, max_rate, port_rate;
/*
* Rebuild table of pollable ports.
*/
s = sphi();
ppnum = 0;
for (chan = 0; chan < ASY_NUM; chan++) {
a1 = asy1 + chan;
if (a1->a_poll)
pptbl[ppnum++] = chan;
}
spl(s);
/*
* If another driver has the polling clock, do nothing.
*/
if (poll_owner & ~ POLL_ASY)
return;
/*
* Find highest valid polling rate in units of HZ/10.
* If using FIFO chip, can poll at 1/16 the usual rate.
*/
max_rate = 0;
for (ix = 0; ix < ppnum; ix++) {
chan = pptbl[ix];
a0 = asy0 + chan;
a1 = asy1 + chan;
port_rate = alp_rate[a0->a_speed];
if (a1->a_ut == US_16550A) {
port_rate /= 16;
if (port_rate % HZ)
port_rate += HZ - (port_rate % HZ);
}
if (max_rate < port_rate)
max_rate = port_rate;
}
/*
* if max_rate is not current rate, adjust the system clock
*/
if (max_rate != poll_rate) {
poll_rate = max_rate;
poll_divisor = poll_rate/HZ; /* used in asyclk() */
altclk_out(); /* stop previous polling */
poll_owner &= ~ POLL_ASY;
if (poll_rate) { /* resume polling at new rate if needed */
poll_owner |= POLL_ASY;
altclk_in(poll_rate, asyclk);
}
}
}
/*
* asysph()
*
* Serial polling handler.
*/
static void
asysph(chan)
int chan;
{
asy0_t *a0 = asy0 + chan;
asy1_t *a1 = asy1 + chan;
TTY *tp = &a1->a_tty;
silo_t *out_silo = &a1->a_out;
silo_t *in_silo = &a1->a_in;
int c, xmit_count;
short port = a0->a_port;
char lsr;
/*
* Check for received break first.
* This status is wiped out on reading the LSR.
*/
lsr = inb(port + LSR);
if (lsr & LS_BREAK)
defer(asybreak, chan);
/*
* Handle all incoming characters.
*/
for (;;) {
lsr = inb(port + LSR);
if ((lsr & LS_RxRDY) == 0)
break;
c = inb(port+DREG);
if (tp->t_open == 0)
continue;
/*
* Must recognize XOFF quickly to avoid transmit overrun.
* Recognize XON here as well to avoid race conditions.
*/
if (ISIXON) {
/*
* XOFF.
*/
if (ISSTOP) {
tp->t_flags |= T_STOP;
continue;
}
/*
* XON.
*/
if (ISSTART) {
tp->t_flags &= ~T_STOP;
continue;
}
}
/*
* Save char in raw input buffer.
*/
if (in_silo->SILO_CHAR_COUNT < MAX_SILO_CHARS) {
in_silo->si_buf[in_silo->si_ix] = c;
if (in_silo->si_ix < MAX_SILO_INDEX)
in_silo->si_ix++;
else
in_silo->si_ix = 0;
in_silo->SILO_CHAR_COUNT++;
}
/*
* If using hardware flow control, see if we need to drop RTS.
*/
if ((tp->t_flags & T_CFLOW)
&& (in_silo->SILO_CHAR_COUNT > SILO_HIGH_MARK)) {
unsigned char mcr = inb(port+MCR);
if (mcr & MC_RTS) {
outb(port+MCR, mcr & ~MC_RTS);
}
}
}
/*
* Handle outgoing characters.
* Do nothing if output is stopped.
*/
lsr = inb(port + LSR);
if ((lsr & LS_TxRDY)
&& !(tp->t_flags & T_STOP)
&& !(a1->a_ohlt)) {
/*
* Transmit next char in raw output buffer.
*/
xmit_count = (a1->a_ut == US_16550A)?16:1;
asy_send(out_silo, port+DREG, xmit_count);
}
/*
* Hardware flow control.
* Check CTS to see if we need to halt output.
*/
if (tp->t_flags & T_CFLOW) {
if (inb(port+MSR) & MS_CTS)
a1->a_ohlt = 0;
else
a1->a_ohlt = 1;
}
}
/*
* asy_send()
*
* Write to xmit data register of the UART.
* Assume all checking about whether it's time to send has been done already.
* Called by time-critical IRQ and polling routines!
*
* "rawout" is the output silo for the TTY struct supplying data to the port.
* "dreg" is the i/o address of the UART xmit data register.
* "xmit_count" is the max number of chars we can write (16 for FIFO parts).
*/
static int
asy_send(rawout, dreg, xmit_count)
register silo_t * rawout;
int dreg, xmit_count;
{
/*
* Transmit next chars in raw output buffer.
*/
for (;(rawout->si_ix != rawout->si_ox) && xmit_count; xmit_count--) {
outb(dreg, rawout->si_buf[rawout->si_ox]);
/*
* Adjust raw output buffer output index.
*/
if (++rawout->si_ox >= sizeof(rawout->si_buf))
rawout->si_ox = 0;
}
return xmit_count;
}
/*
* p1()
*
* Interrupt handler for Comtrol-type port groups.
* Status register has 1 in bit positions for interrupting ports.
*/
static int
p1(g)
int g;
{
asy_gp_t *gp = asy_gp + g;
short port = gp->stat_port;
unsigned char status, index, chan;
int safety = LOOP_LIMIT;
int ret = 0;
#if 0 /* DEBUG */
static int pxstat[2][8];
int ci;
int change_found=0;
for (ci=0; ci<1; ci++) {
index = inb(port+ci);
outb(port+ci, 0);
if (index != pxstat[g][ci]) {
if (!change_found) {
change_found = 1;
printf("<%d:", g);
} else
putchar(' ');
printf("%x:%x", port+ci, index);
pxstat[g][ci] = index;
}
}
if (change_found)
putchar('>');
for (ci=0; ci<8; ci++)
asyintr(4+ci);
putchar('.');
return 0;
#endif /* DEBUG */
/*
* while any port is active
* call simple interrupt handler for active channel
*/
while (status = inb(port)) {
ret = 1;
index = 0;
if (status & 0xf0) {
status &= 0xf0;
index +=4;
} else
status &= 0x0f;
if (status & 0xcc) {
status &= 0xcc;
index +=2;
} else
status &= 0x33;
if (status & 0xaa)
index++;
chan = gp->chan_list[index];
asyintr(chan);
if (safety-- == 0) {
printf("asy: p1 runaway - status %x\n", status);
break;
}
}
return ret;
}
/*
* p2()
*
* Interrupt handler for Arnet-type port groups.
* Status register has 0 in bit positions for interrupting ports.
*/
static int
p2(g)
int g;
{
asy_gp_t *gp = asy_gp + g;
short port = gp->stat_port;
unsigned char status, index, chan;
int safety = LOOP_LIMIT;
int ret = 0;
/*
* while any port is active
* call simple interrupt handler for active channel
*/
while (status = ~inb(port)) {
ret = 1;
index = 0;
if (status & 0xf0) {
status &= 0xf0;
index +=4;
} else
status &= 0x0f;
if (status & 0xcc) {
status &= 0xcc;
index +=2;
} else
status &= 0x33;
if (status & 0xaa)
index++;
chan = gp->chan_list[index];
asyintr(chan);
if (safety-- == 0) {
printf("asy: p2 runaway - status %x\n", status);
break;
}
}
return ret;
}
/*
* p3()
*
* Interrupt handler for GTEK-type port groups.
*/
static int
p3(g)
int g;
{
asy_gp_t *gp = asy_gp + g;
short port = gp->stat_port;
unsigned char index, chan;
/*
* Call simple interrupt handler for active channel.
*/
index = inb(port) & 7;
chan = gp->chan_list[index];
return asyintr(chan);
}
/*
* p4()
*
* Interrupt handler for DigiBoard-type port groups.
*/
static int
p4(g)
int g;
{
asy_gp_t *gp = asy_gp + g;
short port = gp->stat_port;
unsigned char index, chan;
int ret = 0;
int safety = LOOP_LIMIT;
/*
* Status register has slot number for active port,
* or 0xFF if no port is active.
*/
for (;;) {
index = inb(port);
if (index == 0xFF)
break;
if (safety-- == 0) {
printf("asy: p4 runaway - status %x\n", index);
break;
}
ret = 1;
chan = gp->chan_list[index&0xF];
asyintr(chan);
}
return ret;
}
#ifdef TRACER
void
asydump(chan, tag)
int chan;
char *tag;
{
asy0_t *a0 = asy0 + chan;
asy1_t *a1 = asy1 + chan;
TTY *tp = &a1->a_tty;
printf("ch=%d %s\n", chan, tag);
printf("port=%x irqno=%x speed=%d ",
a0->a_port, a0->a_irqno, a0->a_speed);
printf("outs=%x gp=%d xcl=%d\n",
a0->a_outs, a0->a_asy_gp, a0->a_ixc);
printf("in_use=%d lcr=%x irq=%d has_irq=%d ",
a1->a_in_use, a1->a_lcr, a1->a_irq, a1->a_has_irq);
printf("hop=%d hcl=%d ", a1->a_hopn, a1->a_hcls);
printf("opn=%d ier=%x\n", tp->t_open, inb(a0->a_port+IER));
}
#endif
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.