Return to msdos CVS log

Up to [MW Coherent from dump] / coherent / d / bin / dos

Annotation of coherent/d/bin/dos/msdos, revision 1.1

1.1     ! root        1: # This is the configuration file for the dos family of programs
        !             2: 
        !             3: # Blank lines and lines the begin with a # are ignored
        !             4: 
        !             5: # Lines that begin with a '.' are ascii suffix indicators. Files that have 
        !             6: # one of the extentions are treated as ascii files (CRLF-LF conversion is
        !             7: # preformed) unless the binary flag is specified.
        !             8: .1st
        !             9: .asm
        !            10: .b
        !            11: .bas
        !            12: .bat
        !            13: .c
        !            14: .cpp
        !            15: .doc
        !            16: .h
        !            17: .hpp
        !            18: .inc
        !            19: .l
        !            20: .m
        !            21: .me
        !            22: .p
        !            23: .ps
        !            24: .r
        !            25: .r
        !            26: .s
        !            27: .sh
        !            28: .shar
        !            29: .txt
        !            30: .y
        !            31: 
        !            32: # Lines of the form str=str are device translators. For example, if you had 
        !            33: # line 'c=/dev/at0a', the dos programs would translate c: into /dev/at0a.
        !            34: 
        !            35: # This is for a system with a 5.25 inch A drive and a 3.5 inch B drive 
        !            36: a=/dev/fha0
        !            37: a9=/dev/f9a0
        !            38: b=/dev/fva1
        !            39: bq=/dev/fqa1
        !            40: 
        !            41: # This is for a system with a 3.5 inch A drive and a 5.25 inch B drive 
        !            42: #a=/dev/fva0
        !            43: #aq=/dev/fqa0
        !            44: #b=/dev/fha1
        !            45: #b9=/dev/f9a1
        !            46: 
        !            47: # Uncoment the lines that correspond to MS-DOS partitions on your hard disk.
        !            48: c=/dev/at0a
        !            49: #d=/dev/at0b
        !            50: #e=/dev/at0c
        !            51: #f=/dev/at0d
        !            52: 
        !            53: # If you have an extended partition, you can access it by putting a ';number'
        !            54: # after the device name. For example, you might have a line:
        !            55: # d=/dev/at0a;1 
        !            56: # to refer to extended partition 1.
        !            57: 
        !            58: 
        !            59: 

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.