|
|
1.1 root 1: # Type field:
2: # 0 -> The device does not require an interrupt line
3: # 1 -> The device requires an interrupt line
4: # If the driver supports more than one hardware controller,
5: # each controller requires a separate interrupt.
6: # 2 -> The device requires an interrupt line
7: # If the driver supports more than one hardware controller,
8: # each controller will share the same interrupt.
9: # 3 -> The device requires an interrupt line
10: # If the driver supports more than one hardware controller,
11: # each controller will share the same interrupt. Multiple
12: # device drivers having the same IPL can share this interrupt
13: # (this requires special hardware support).
14:
15: # full config unit ------interrupt---- I/O address mem address
16: # name Y/N no pri type vector low high low high
17:
18: #clock Y 0 7 1 0 0x0 0x0 0x0 0x0
19: streams N 0 0 0 0 0x0 0x0 0x0 0x0
20: timeout N 0 0 0 0 0x0 0x0 0x0 0x0
21: loop N 0 0 0 0 0x0 0x0 0x0 0x0
22: dump N 0 0 0 0 0x0 0x0 0x0 0x0
23: echo N 0 0 0 0 0x0 0x0 0x0 0x0
24:
25: # The following are old-style Coherent drivers. You *must* configure one of
26: # the {kb, nkb, vtkb, vtnkb} drivers for your system.
27: nl Y 0 0 0 0 0x0 0x0 0x0 0x0
28: ct Y 0 0 0 0 0x0 0x0 0x0 0x0
29: kb N 0 0 0 0 0x0 0x0 0x0 0x0
30: nkb N 0 0 0 0 0x0 0x0 0x0 0x0
31: vtkb N 0 0 0 0 0x0 0x0 0x0 0x0
32: vtnkb Y 0 0 0 0 0x0 0x0 0x0 0x0
33: lp Y 0 0 0 0 0x0 0x0 0x0 0x0
34: fd N 0 0 0 0 0x0 0x0 0x0 0x0
35: fl Y 0 0 0 0 0x0 0x0 0x0 0x0
36: asy Y 0 0 0 0 0x0 0x0 0x0 0x0
37: al0 N 0 0 0 0 0x0 0x0 0x0 0x0
38: al1 N 0 0 0 0 0x0 0x0 0x0 0x0
39: hs N 0 0 0 0 0x0 0x0 0x0 0x0
40: rm Y 0 0 0 0 0x0 0x0 0x0 0x0
41: pty Y 0 0 0 0 0x0 0x0 0x0 0x0
42: ms N 0 0 0 0 0x0 0x0 0x0 0x0
43: at Y 0 0 0 0 0x0 0x0 0x0 0x0
44: st N 0 0 0 0 0x0 0x0 0x0 0x0
45: aha N 0 0 0 0 0x0 0x0 0x0 0x0
46: hai N 0 0 0 0 0x0 0x0 0x0 0x0
47: ss N 0 0 0 0 0x0 0x0 0x0 0x0
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.