|
|
coherent
# Type field:
# 0 -> The device does not require an interrupt line
# 1 -> The device requires an interrupt line
# If the driver supports more than one hardware controller,
# each controller requires a separate interrupt.
# 2 -> The device requires an interrupt line
# If the driver supports more than one hardware controller,
# each controller will share the same interrupt.
# 3 -> The device requires an interrupt line
# If the driver supports more than one hardware controller,
# each controller will share the same interrupt. Multiple
# device drivers having the same IPL can share this interrupt
# (this requires special hardware support).
# full config unit ------interrupt---- I/O address mem address
# name Y/N no pri type vector low high low high
#clock Y 0 7 1 0 0x0 0x0 0x0 0x0
streams N 0 0 0 0 0x0 0x0 0x0 0x0
console Y 0 0 0 0 0x0 0x0 0x0 0x0
cohmain Y 0 0 0 0 0x0 0x0 0x0 0x0
em87 N 0 0 0 0 0x0 0x0 0x0 0x0
timeout N 0 0 0 0 0x0 0x0 0x0 0x0
loop N 0 0 0 0 0x0 0x0 0x0 0x0
dump N 0 0 0 0 0x0 0x0 0x0 0x0
echo N 0 0 0 0 0x0 0x0 0x0 0x0
# The following are old-style Coherent drivers. You *must* configure one of
# the {kb, nkb, vtkb, vtnkb} drivers for your system.
nl Y 0 0 0 0 0x0 0x0 0x0 0x0
ct Y 0 0 0 0 0x0 0x0 0x0 0x0
kb N 0 0 0 0 0x0 0x0 0x0 0x0
nkb N 0 0 0 0 0x0 0x0 0x0 0x0
vtkb N 0 0 0 0 0x0 0x0 0x0 0x0
vtnkb Y 0 0 0 0 0x0 0x0 0x0 0x0
lp N 0 0 0 0 0x0 0x0 0x0 0x0
fd Y 0 0 0 0 0x0 0x0 0x0 0x0
asy Y 0 0 0 0 0x0 0x0 0x0 0x0
al0 N 0 0 0 0 0x0 0x0 0x0 0x0
al1 N 0 0 0 0 0x0 0x0 0x0 0x0
hs N 0 0 0 0 0x0 0x0 0x0 0x0
rm Y 0 0 0 0 0x0 0x0 0x0 0x0
pty Y 0 0 0 0 0x0 0x0 0x0 0x0
ms N 0 0 0 0 0x0 0x0 0x0 0x0
at Y 0 0 0 0 0x0 0x0 0x0 0x0
st N 0 0 0 0 0x0 0x0 0x0 0x0
aha N 0 0 0 0 0x0 0x0 0x0 0x0
hai Y 0 0 0 0 0x0 0x0 0x0 0x0
ss N 0 0 0 0 0x0 0x0 0x0 0x0
dummy N 0 0 0 0 0x0 0x0 0x0 0x0
patch N 0 0 0 0 0x0 0x0 0x0 0x0
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.