Return to cmn_err.c CVS log

Up to [MW Coherent from dump] / coherent / f / etc / conf / streams / src

Annotation of coherent/f/etc/conf/streams/src/cmn_err.c, revision 1.1

1.1     ! root        1: #define        _DDI_DKI        1
        !             2: #define        _SYSV4          1
        !             3: 
        !             4: /*
        !             5:  * Error-reporting code....
        !             6:  */
        !             7: 
        !             8: /*
        !             9:  *-IMPORTS:
        !            10:  *     <common/ccompat.h>
        !            11:  *             __PROTO ()
        !            12:  *             __USE_PROTO__
        !            13:  *             __ARGS ()
        !            14:  *     <common/xdebug.h>
        !            15:  *             __LOCAL__
        !            16:  *     <sys/inline.h>
        !            17:  *             splhi ()
        !            18:  *             splx ()
        !            19:  *     <sys/ksynch.h>
        !            20:  *             lock_t
        !            21:  *             LOCK ()
        !            22:  *             LOCK_ALLOC ()
        !            23:  *             UNLOCK ()
        !            24:  *     <common/_null.h>
        !            25:  *             NULL
        !            26:  *     <limits.h>
        !            27:  *             CHAR_BIT
        !            28:  *     <stdarg.h>
        !            29:  *             va_list
        !            30:  *             va_start ()
        !            31:  *             va_arg ()
        !            32:  *             va_end ()
        !            33:  *
        !            34:  *-PRIVATE DEPENDENCIES:
        !            35:  *     _put_console ()
        !            36:  *     _put_putbuf ()
        !            37:  */
        !            38: 
        !            39: #include <common/ccompat.h>
        !            40: #include <common/xdebug.h>
        !            41: #include <sys/inline.h>
        !            42: #include <sys/ksynch.h>
        !            43: #include <common/_null.h>
        !            44: #include <sys/ddi.h>
        !            45: 
        !            46: #include <limits.h>
        !            47: #include <stdarg.h>
        !            48: 
        !            49: #include <sys/cmn_err.h>
        !            50: 
        !            51: #ifdef __MSDOS__
        !            52: 
        !            53: #include <process.h>
        !            54: 
        !            55: #endif
        !            56: 
        !            57: 
        !            58: /*
        !            59:  *-GLOBAL VARIABLES:
        !            60:  *      conlock                lock to single-thread console output
        !            61:  *     putlock         lock to single-thread putbuf output
        !            62:  */
        !            63: 
        !            64: /*
        !            65:  * Note that these locks are always acquired in the order conlock -> putlock;
        !            66:  * this is required to ensure that the system remains deadlock-free. The
        !            67:  * hierarchy mechanism is used to enforce this constraint.
        !            68:  *
        !            69:  * We use the user namespace for these since if they are actually made public
        !            70:  * by definitions in <common/xdebug.h> then they will still not conflict with
        !            71:  * user symbols (ie, we assume that this module is an "implementation"
        !            72:  * module...
        !            73:  */
        !            74: 
        !            75: __LOCAL__ lock_t                     * _conlock;
        !            76: __LOCAL__ lock_t             * _putlock;
        !            77: 
        !            78: 
        !            79: /*
        !            80:  * The following are not global variables, they're static constants.
        !            81:  */
        !            82: 
        !            83: static char * message_level [] = {
        !            84:        "",
        !            85:        "NOTICE : ",
        !            86:        "WARNING : ",
        !            87:        "PANIC : ",
        !            88:        "<INVALID ERROR LEVEL> : "
        !            89: };
        !            90: 
        !            91: 
        !            92: /*
        !            93:  * The following external function declarations exist for internal layering
        !            94:  * purposes and do not appear in any headers. The names begin with a single
        !            95:  * underscore (reserved for the user with internal linkage, reserved for the
        !            96:  * system with external linkage) so as not to conflict with any user-defined
        !            97:  * symbol names.
        !            98:  *
        !            99:  * If you find this use of the implementation namespace distasteful, then
        !           100:  * you'll have to move the function definitions in here.
        !           101:  *
        !           102:  * Note also that these functions will have the default language linkage
        !           103:  * for the translator, ie we allow these functions to be mangled C++. This
        !           104:  * constrains them to be produced by the same translator used for this
        !           105:  * module.
        !           106:  */
        !           107: 
        !           108: #if    __COHERENT__
        !           109: void           putchar         __PROTO ((int _c));
        !           110: #define        _put_console(c)         putchar (c)
        !           111: #else
        !           112: void           _put_console    __PROTO ((unsigned char _outch));
        !           113: #endif
        !           114: 
        !           115: void           _put_putbuf     __PROTO ((unsigned char _outch));
        !           116: 
        !           117: 
        !           118: /*
        !           119:  *-STATUS:
        !           120:  *     DDI/DKI
        !           121:  *
        !           122:  *-NAME:
        !           123:  *     cmn_err ()      display an error message or panic the system
        !           124:  *
        !           125:  *-SYNOPSIS:
        !           126:  *     #include <sys/cmn_err.h>
        !           127:  *
        !           128:  *     void cmn_err (int level, char * format, ...);
        !           129:  *
        !           130:  *-ARGUMENTS:
        !           131:  *     level           "level" indicates the severity of the error condition.
        !           132:  *                     Valid levels are:
        !           133:  *                     CE_CONT used to continue a previous message or to
        !           134:  *                             display an informative message not connected
        !           135:  *                             with an error.
        !           136:  *                     CE_NOTE used to display a message preceded with
        !           137:  *                             NOTICE:. This message is used to report system
        !           138:  *                             events that do not necessarily require action,
        !           139:  *                             by may interest the system administrator. For
        !           140:  *                             example, a message saying that a sector on a
        !           141:  *                             disk needs to be accessed repeatedly before it
        !           142:  *                             can be accessed correctly might be noteworthy.
        !           143:  *                     CE_WARN use to display a message preceded with
        !           144:  *                             WARNING:. This message is used to report
        !           145:  *                             system events that require immediate
        !           146:  *                             attention, such as those where if an action is
        !           147:  *                             not taken, the system may panic. For example,
        !           148:  *                             where a peripheral device does not initialize
        !           149:  *                             correctly, this level should be used.
        !           150:  *                     CE_PANIC used to display a message preceded by PANIC:,
        !           151:  *                             and panic the system. Drivers should use this
        !           152:  *                             level only for debugging or in the case of
        !           153:  *                             severe errors that indicate that the system
        !           154:  *                             cannot continue to function. This level halts
        !           155:  *                             processing.
        !           156:  *
        !           157:  *     format          The message to be displayed. By default, the message
        !           158:  *                     is sent both to the system console and to the circular
        !           159:  *                     kernel buffer, "putbuf". If the first character in
        !           160:  *                     "format" is an exclamation point ("!"), the message
        !           161:  *                     goes only to "putbuf". If the first character in
        !           162:  *                     "format" is a circumflex ("^"), the message goes only
        !           163:  *                     to the console. The size of the circular buffer
        !           164:  *                     "putbuf" is defined by the kernel variable "putbufsz".
        !           165:  *                     Driver developers or administrators can read the
        !           166:  *                     "putbuf" buffer using appropriate debugging or
        !           167:  *                     administrative tools.
        !           168:  *
        !           169:  *                     cmn_err () appends '\n' to each "format" string, even
        !           170:  *                     when a message is sent to "putbuf", except when level
        !           171:  *                     is CE_CONT.
        !           172:  *
        !           173:  *                     Valid conversion specifications are %s, %u, %d, %o,
        !           174:  *                     and %x. The cmn_err () function is otherwise similar
        !           175:  *                     to the printf () library subroutine is its
        !           176:  *                     interpretation of the "format" string, except that
        !           177:  *                     cmn_err () does not accept length specifications in
        !           178:  *                     conversion specifications. For example, %3d is invalid
        !           179:  *                     and will be treated as a literal string, resulting in
        !           180:  *                     a mismatch of arguments.
        !           181:  *
        !           182:  *     ...             the set of arguments passed with the message being
        !           183:  *                     displayed. Any argument within the range of supported
        !           184:  *                     conversion specifications can be passed.
        !           185:  *
        !           186:  *-DESCRIPTION:
        !           187:  *     cmn_err () displays a specified message on the console and/or stores
        !           188:  *     it in the kernel buffer "putbuf". cmn_err () can also panic the
        !           189:  *     system.
        !           190:  *
        !           191:  *     At times a driver may encounter error conditions requiring the
        !           192:  *     attention of a system console monitor. These conditions may mean
        !           193:  *     halting the system; however, this must be done with caution. Except
        !           194:  *     during the debugging stage, or in the case of a serious, unrecoverable
        !           195:  *     error, a driver should never stop the system.
        !           196:  *
        !           197:  *     The cmn_err () function with the CE_CONT argument can be used by
        !           198:  *     driver developers as a driver code debugging tool. However, using
        !           199:  *     cmn_err () in this capacity can change system timing characteristics.
        !           200:  *
        !           201:  *-NOTES:
        !           202:  *     Does not sleep.
        !           203:  *
        !           204:  *     If "level" is CE_PANIC, then driver defined basic locks, read/write
        !           205:  *     locks, and sleep locks may not be held across calls to this function.
        !           206:  *     For other levels, locks may be held.
        !           207:  */
        !           208: 
        !           209: enum { OUT_CONSOLE = 1,
        !           210:        OUT_PUTBUF = 2,
        !           211:        OUT_LONG = 4,
        !           212:        OUT_SHORT = 8,
        !           213:        OUT_SIGNED = 16
        !           214: };
        !           215: 
        !           216: typedef        char          * _string_t;      /* for va_arg () */
        !           217: typedef unsigned short         _ushort_t;
        !           218: typedef unsigned int   _uint_t;
        !           219: typedef unsigned long  _ulong_t;
        !           220: 
        !           221: 
        !           222: #if    __USE_PROTO__
        !           223: void (cmn_err) (int level, char * format, ...)
        !           224: #else
        !           225: void
        !           226: cmn_err __ARGS ((level, format))
        !           227: int            level;
        !           228: char         * format;
        !           229: #endif
        !           230: {
        !           231:        /*
        !           232:         * The following local data is used for converting numeric data to
        !           233:         * strings. Numbuf is defined such that it is large enough to hold
        !           234:         * the maximum number of digits that could be generated from any
        !           235:         * conversion specification (currently, the longest possible spec is
        !           236:         * %lo).
        !           237:         */
        !           238: 
        !           239:        char            numbuf [(sizeof (long) * CHAR_BIT  + 2) / 3 + 1];
        !           240:        char          * numptr;
        !           241:        int             radix;
        !           242:        long            svalue;
        !           243:        unsigned long   value;
        !           244: 
        !           245:        va_list         args;
        !           246: 
        !           247:        unsigned        output;         /* who to output to */
        !           248: 
        !           249:        pl_t            con_pl;         /* for locking */
        !           250:        pl_t            put_pl;
        !           251: 
        !           252: 
        !           253:        if (format == NULL)
        !           254:                format = "<cmn_err: no error message was supplied>";
        !           255: 
        !           256:        if (* format == '!') {
        !           257:                format ++;
        !           258:                output = OUT_PUTBUF;
        !           259:        } else if (* format == '^') {
        !           260:                format ++;
        !           261:                output = OUT_CONSOLE;
        !           262:        } else
        !           263:                output = OUT_PUTBUF | OUT_CONSOLE;
        !           264: 
        !           265: 
        !           266:        /*
        !           267:         * Before we generate any output, we should lock the console/putbuf
        !           268:         * so that our messages won't get interspersed with diagnostic output
        !           269:         * from interrupt handlers or other CPUs.
        !           270:         *
        !           271:         * If we get called before the locks have been allocated, proceed
        !           272:         * at the highest interrupt priority as a fallback.
        !           273:         */
        !           274: 
        !           275:        if (_conlock != NULL) {
        !           276:                if ((output & OUT_CONSOLE) != 0)
        !           277:                        con_pl = LOCK (_conlock, plhi);
        !           278: 
        !           279:                if ((output & OUT_PUTBUF) != 0)
        !           280:                        put_pl = LOCK (_putlock, plhi);
        !           281:        } else
        !           282:                con_pl = splhi ();
        !           283: 
        !           284: 
        !           285:        /*
        !           286:         * Check that the level argument is reasonable.
        !           287:         */
        !           288: 
        !           289:        if (level < CE_CONT || level > CE_PANIC)
        !           290:                level = CE_INVALID;
        !           291: 
        !           292: 
        !           293:        /*
        !           294:         * We should think about generating the date and as accurate a time
        !           295:         * reading as possible along with the fixed-text header.
        !           296:         *
        !           297:         * For now, we'll just generate some fixed text.
        !           298:         */
        !           299: 
        !           300:        numptr = message_level [level];
        !           301: 
        !           302:        while (* numptr != 0) {
        !           303:                if ((output & OUT_CONSOLE) != 0)
        !           304:                        _put_console (* numptr);
        !           305: 
        !           306:                if ((output & OUT_PUTBUF) != 0)
        !           307:                        _put_putbuf (* numptr);
        !           308: 
        !           309:                numptr ++;
        !           310:        }
        !           311: 
        !           312: 
        !           313:        /*
        !           314:         * Now start generating formatted output.
        !           315:         *
        !           316:         * The manual page quoted in the function header doesn't say whether
        !           317:         * the 'l' and 'h' modifiers are available for conversion
        !           318:         * specifications. We'll implement them anyway.
        !           319:         */
        !           320: 
        !           321:        va_start (args, format);
        !           322: 
        !           323:        while (* format != 0) {
        !           324:                if (format [0] == '%') {
        !           325:                        /*
        !           326:                         * Process the conversion-specifications.
        !           327:                         *
        !           328:                         * We temporarily borrow 'radix' as a temporary for
        !           329:                         * working out how long the conversion specification
        !           330:                         * is.
        !           331:                         */
        !           332: 
        !           333: 
        !           334:                        output &= ~ (OUT_LONG | OUT_SHORT | OUT_SIGNED);
        !           335: 
        !           336:                        radix = 2;
        !           337: 
        !           338:                        if (format [radix - 1] == 'h') {
        !           339:                                output |= OUT_SHORT;
        !           340:                                radix ++;
        !           341:                        } else if (format [radix - 1] == 'l') {
        !           342:                                output |= OUT_LONG;
        !           343:                                radix ++;
        !           344:                        }
        !           345: 
        !           346:                        switch ((format += radix) [-1]) {
        !           347: 
        !           348:                        case 's':
        !           349:                                numptr = va_arg (args, _string_t);
        !           350:                                goto out_string;
        !           351: 
        !           352:                        case 'd':
        !           353:                                /*
        !           354:                                 * This is the only signed numeric conversion
        !           355:                                 * specification, so we process the sign here.
        !           356:                                 */
        !           357: 
        !           358:                                radix = 10;
        !           359: 
        !           360:                                if ((output & OUT_SHORT) != 0)
        !           361:                                        svalue = (short) va_arg (args, int);
        !           362:                                else if ((output & OUT_LONG) != 0)
        !           363:                                        svalue = va_arg (args, long);
        !           364:                                else
        !           365:                                        svalue = va_arg (args, int);
        !           366: 
        !           367:                                if (svalue < 0) {
        !           368:                                        if ((output & OUT_CONSOLE) != 0)
        !           369:                                                _put_console ('-');
        !           370: 
        !           371:                                        if ((output & OUT_PUTBUF) != 0)
        !           372:                                                _put_putbuf ('-');
        !           373: 
        !           374:                                        svalue = - svalue;
        !           375:                                }
        !           376: 
        !           377:                                output |= OUT_SIGNED;
        !           378:                                break;
        !           379: 
        !           380:                        case 'o':
        !           381:                                radix = 8;
        !           382:                                break;
        !           383: 
        !           384:                        case 'u':
        !           385:                                radix = 10;
        !           386:                                break;
        !           387: 
        !           388:                        case 'x':
        !           389:                                radix = 16;
        !           390:                                break;
        !           391: 
        !           392:                        case '%':
        !           393:                                /*
        !           394:                                 * Special case: %% -> %
        !           395:                                 */
        !           396: 
        !           397:                                format -= 1;
        !           398:                                goto bad_format;
        !           399: 
        !           400:                        default:
        !           401:                                /*
        !           402:                                 * It's not a valid conversion, so we back
        !           403:                                 * up "format".
        !           404:                                 */
        !           405:                                format -= radix;
        !           406:                                goto bad_format;
        !           407:                        }
        !           408: 
        !           409: 
        !           410:                        /*
        !           411:                         * All numeric conversions come here.
        !           412:                         */
        !           413: 
        !           414:                        if ((output & OUT_SIGNED) != 0)
        !           415:                                value = svalue;
        !           416:                        else if ((output & OUT_SHORT) != 0)
        !           417:                                value = (_ushort_t) va_arg (args, _uint_t);
        !           418:                        else if ((output & OUT_LONG) != 0)
        !           419:                                value = va_arg (args, _ulong_t);
        !           420:                        else
        !           421:                                value = va_arg (args, _uint_t);
        !           422: 
        !           423: 
        !           424:                        /*
        !           425:                         * Now we generate the output digits one-at-a-time in
        !           426:                         * reverse order. We step back from the end of the
        !           427:                         * conversion buffer so that at the end of the
        !           428:                         * conversion process we have a C string with the
        !           429:                         * characters in a 'normal' order.
        !           430:                         *
        !           431:                         * (This allows the final output loop to be folded in
        !           432:                         *  with the string-output code).
        !           433:                         */
        !           434: 
        !           435:                        numptr = & numbuf [sizeof (numbuf) - 1];
        !           436: 
        !           437:                        * numptr = 0;   /* terminate the output string */
        !           438: 
        !           439:                        do {
        !           440:                                int     rem = (int) (value % radix);
        !           441:                                value /= radix;
        !           442: 
        !           443:                                * -- numptr = (rem < 10) ? rem + '0' :
        !           444:                                                           rem + 'a' - 10;
        !           445:                        } while (value > 0);
        !           446: 
        !           447: 
        !           448:                        /*
        !           449:                         * Copy temporary numeric-conversion string or
        !           450:                         * user-supplied string argument to the output.
        !           451:                         */
        !           452: 
        !           453: out_string:
        !           454:                        while (* numptr != 0) {
        !           455:                                if ((output & OUT_CONSOLE) != 0)
        !           456:                                        _put_console (* numptr);
        !           457: 
        !           458:                                if ((output & OUT_PUTBUF) != 0)
        !           459:                                        _put_putbuf (* numptr);
        !           460: 
        !           461:                                numptr ++;
        !           462:                        }
        !           463:                        continue;
        !           464:                }
        !           465: bad_format:
        !           466:                if ((output & OUT_CONSOLE) != 0)
        !           467:                        _put_console (* format);
        !           468: 
        !           469:                if ((output & OUT_PUTBUF) != 0)
        !           470:                        _put_putbuf (* format);
        !           471: 
        !           472:                format ++;
        !           473:        }
        !           474: 
        !           475: 
        !           476:        /*
        !           477:         * Output a trailing '\n' unless the level is CE_CONT
        !           478:         */
        !           479: 
        !           480:        if (level != CE_CONT) {
        !           481:                if ((output & OUT_CONSOLE) != 0)
        !           482:                        _put_console ('\n');
        !           483: 
        !           484:                if ((output & OUT_PUTBUF) != 0)
        !           485:                        _put_putbuf ('\n');
        !           486:        }
        !           487: 
        !           488: 
        !           489:        /*
        !           490:         * Now release the locks we acquired, and consider returning to the
        !           491:         * caller (unless this is a panic).
        !           492:         *
        !           493:         * A minor point: if we panic, we should release our locks but
        !           494:         * without causing interrupts to be enabled on this CPU; in order to
        !           495:         * do this we kludge "con_pl" and "put_pl" to be "plhi";
        !           496:         */
        !           497: 
        !           498:        if (level >= CE_PANIC)          /* panic on an invalid level */
        !           499:                con_pl = put_pl = plhi;
        !           500: 
        !           501: 
        !           502:        if (_conlock != NULL) {
        !           503:                if ((output & OUT_PUTBUF) != 0)
        !           504:                        UNLOCK (_putlock, put_pl);
        !           505: 
        !           506:                if ((output & OUT_CONSOLE) != 0)
        !           507:                        LOCK (_conlock, con_pl);
        !           508:        } else
        !           509:                (void) splx (con_pl);
        !           510: 
        !           511: 
        !           512:        if (level >= CE_PANIC) {
        !           513:                /*
        !           514:                 * This CPU is shutting down. The actions to be taken here
        !           515:                 * are so highly system-specific that we'll just throw them
        !           516:                 * into another file.
        !           517:                 */
        !           518: 
        !           519: #ifdef __MSDOS__
        !           520:                splx (plbase);
        !           521: 
        !           522:                exit (3);       /* call atexit () functions */
        !           523: #endif
        !           524:        }
        !           525: }

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.