Return to x86io.c CVS log

Up to [MW Coherent from dump] / coherent / f / etc / conf / streams / src

Annotation of coherent/f/etc/conf/streams/src/x86io.c, revision 1.1

1.1     ! root        1: #define        _DDI_DKI        1
        !             2: #define        _SYSV4          1
        !             3: 
        !             4: /*
        !             5:  * This file exists to provide external-linkage versions of the normally
        !             6:  * inline definitions for the 80x86 I/O functions, and to provide manual-page
        !             7:  * skeletons for them as well.
        !             8:  *
        !             9:  * Note that on systems which already provide these functions or where they
        !            10:  * cannot be provided in an inline form (such as Coherent, where they must be
        !            11:  * implemented in assembly language) this module should be excluded from the
        !            12:  * library builds, but should be kept for documentation extraction.
        !            13:  */
        !            14: 
        !            15: /*
        !            16:  *-IMPORTS:
        !            17:  *     <common/ccompat.h>
        !            18:  *             __USE_PROTO__
        !            19:  *             __ARGS ()
        !            20:  *     <sys/types.h>
        !            21:  *             uchar_t
        !            22:  *             ushort_t
        !            23:  *             ulong_t
        !            24:  */
        !            25: 
        !            26: #include <common/ccompat.h>
        !            27: #include <sys/types.h>
        !            28: 
        !            29: #include <kernel/x86io.h>
        !            30: 
        !            31: #if    ! defined (repinsb) || ! defined (repinsd) || ! defined (repinsw) \
        !            32:                || ! defined (repoutsb) || ! defined (repoutsd) || ! defined (repoutsw) \
        !            33:                || ! defined (inb) || ! defined (inl) || ! defined (inw) \
        !            34:                || ! defined (outb) || ! defined (outl) || ! defined (outw)
        !            35: #error This module expects preprocessor definitions for the I/O functions
        !            36: #endif
        !            37: 
        !            38: /*
        !            39:  *-STATUS:
        !            40:  *     DDI/DKI
        !            41:  *
        !            42:  *-NAME:
        !            43:  *     inb             Read a byte from an 8-bit I/O port
        !            44:  *
        !            45:  *-ARGUMENTS:
        !            46:  *     port            A valid 8-bit I/O port
        !            47:  *
        !            48:  *-DESCRIPTION:
        !            49:  *     This function provides a C-language interface to the machine
        !            50:  *     instruction that reads a byte from an 8-bit I/O port using the I/O
        !            51:  *     address space instead of the memory address space.
        !            52:  *
        !            53:  *-RETURN VALUE:
        !            54:  *     Returns the value of the byte read from the I/O port.
        !            55:  *
        !            56:  *-LEVEL:
        !            57:  *     Base or Interrupt.
        !            58:  *
        !            59:  *-NOTES:
        !            60:  *     Does not sleep.
        !            61:  *
        !            62:  *     Driver-defined basic locks, read/write locks, and sleep locks may be
        !            63:  *     held across calls to this function.
        !            64:  *
        !            65:  *     This function may not be meaningful on all implementations because
        !            66:  *     some implementations may not support I/O-mapped I/O.
        !            67:  */
        !            68: 
        !            69: #if    __USE_PROTO__
        !            70: uchar_t (inb) (int port)
        !            71: #else
        !            72: uchar_t
        !            73: inb __ARGS ((port))
        !            74: int            port;
        !            75: #endif
        !            76: {
        !            77:        return inb (port);
        !            78: }
        !            79: 
        !            80: 
        !            81: 
        !            82: /*
        !            83:  *-STATUS:
        !            84:  *     DDI/DKI
        !            85:  *
        !            86:  *-NAME:
        !            87:  *     inl             Read a 32-bit long word from a 32-bit I/O port
        !            88:  *
        !            89:  *-ARGUMENTS:
        !            90:  *     port            A valid 32-bit I/O port
        !            91:  *
        !            92:  *-DESCRIPTION:
        !            93:  *     This function provides a C-language interface to the machine
        !            94:  *     instruction that reads a 32-bit long word from a 32-bit I/O port using
        !            95:  *     the I/O address space instead of the memory address space.
        !            96:  *
        !            97:  *-RETURN VALUE:
        !            98:  *     Returns the value of the 32-bit word read from the I/O port.
        !            99:  *
        !           100:  *-LEVEL:
        !           101:  *     Base or Interrupt.
        !           102:  *
        !           103:  *-NOTES:
        !           104:  *     Does not sleep.
        !           105:  *
        !           106:  *     Driver-defined basic locks, read/write locks, and sleep locks may be
        !           107:  *     held across calls to this function.
        !           108:  *
        !           109:  *     This function may not be meaningful on all implementations because
        !           110:  *     some implementations may not support I/O-mapped I/O.
        !           111:  */
        !           112: 
        !           113: #if    __USE_PROTO__
        !           114: ulong_t (inl) (int port)
        !           115: #else
        !           116: ulong_t
        !           117: inl __ARGS ((port))
        !           118: int            port;
        !           119: #endif
        !           120: {
        !           121:        return inl (port);
        !           122: }
        !           123: 
        !           124: 
        !           125: /*
        !           126:  *-STATUS:
        !           127:  *     DDI/DKI
        !           128:  *
        !           129:  *-NAME:
        !           130:  *     inw             Read a 16-bit short word from a 16-bit I/O port
        !           131:  *
        !           132:  *-ARGUMENTS:
        !           133:  *     port            A valid 16-bit I/O port
        !           134:  *
        !           135:  *-DESCRIPTION:
        !           136:  *     This function provides a C-language interface to the machine
        !           137:  *     instruction that reads a 16-bit short word from a 16-bit I/O port
        !           138:  *     using the I/O address space instead of the memory address space.
        !           139:  *
        !           140:  *-RETURN VALUE:
        !           141:  *     Returns the value of the 16-bit short word read from the I/O port.
        !           142:  *
        !           143:  *-LEVEL:
        !           144:  *     Base or Interrupt.
        !           145:  *
        !           146:  *-NOTES:
        !           147:  *     Does not sleep.
        !           148:  *
        !           149:  *     Driver-defined basic locks, read/write locks, and sleep locks may be
        !           150:  *     held across calls to this function.
        !           151:  *
        !           152:  *     This function may not be meaningful on all implementations because
        !           153:  *     some implementations may not support I/O-mapped I/O.
        !           154:  */
        !           155: 
        !           156: #if    __USE_PROTO__
        !           157: ushort_t (inw) (int port)
        !           158: #else
        !           159: ushort_t
        !           160: inw __ARGS ((port))
        !           161: int            port;
        !           162: #endif
        !           163: {
        !           164:        return inw (port);
        !           165: }
        !           166: 
        !           167: 
        !           168: 
        !           169: /*
        !           170:  *-STATUS:
        !           171:  *     DDI/DKI
        !           172:  *
        !           173:  *-NAME:
        !           174:  *     outb            Write a byte to an 8-bit I/O port.
        !           175:  *
        !           176:  *-ARGUMENTS:
        !           177:  *     port            A valid 8-bit I/O port.
        !           178:  *     data            The 8-bit value to the written to the port.
        !           179:  *
        !           180:  *-DESCRIPTION:
        !           181:  *     This function provides a C-language interface to the machine
        !           182:  *     instruction that writes a byte to an 8-bit I/O port using the I/O
        !           183:  *     address space instead of the memory address space.
        !           184:  *
        !           185:  *-RETURN VALUE:
        !           186:  *     None.
        !           187:  *
        !           188:  *-LEVEL:
        !           189:  *     Base or Interrupt.
        !           190:  *
        !           191:  *-NOTES:
        !           192:  *     Does not sleep.
        !           193:  *
        !           194:  *     Driver-defined basic locks, read/write locks, and sleep locks may be
        !           195:  *     held across calls to this function.
        !           196:  *
        !           197:  *     This function may not be meaningful on all implementations because
        !           198:  *     some implementations may not support I/O-mapped I/O.
        !           199:  */
        !           200: 
        !           201: #if    __USE_PROTO__
        !           202: void (outb) (int port, uchar_t data)
        !           203: #else
        !           204: void
        !           205: outb __ARGS ((port, data))
        !           206: int            port;
        !           207: uchar_t                data;
        !           208: #endif
        !           209: {
        !           210:        outb (port, data);
        !           211: }
        !           212: 
        !           213: 
        !           214: 
        !           215: /*
        !           216:  *-STATUS:
        !           217:  *     DDI/DKI
        !           218:  *
        !           219:  *-NAME:
        !           220:  *     outl            Write a 32-bit long word to a 32-bit I/O port.
        !           221:  *
        !           222:  *-ARGUMENTS:
        !           223:  *     port            A valid 32-bit I/O port.
        !           224:  *     data            The 32-bit value to the written to the port.
        !           225:  *
        !           226:  *-DESCRIPTION:
        !           227:  *     This function provides a C-language interface to the machine
        !           228:  *     instruction that writes a 32-bit long word to a 32-bit I/O port using
        !           229:  *     the I/O address space instead of the memory address space.
        !           230:  *
        !           231:  *-RETURN VALUE:
        !           232:  *     None.
        !           233:  *
        !           234:  *-LEVEL:
        !           235:  *     Base or Interrupt.
        !           236:  *
        !           237:  *-NOTES:
        !           238:  *     Does not sleep.
        !           239:  *
        !           240:  *     Driver-defined basic locks, read/write locks, and sleep locks may be
        !           241:  *     held across calls to this function.
        !           242:  *
        !           243:  *     This function may not be meaningful on all implementations because
        !           244:  *     some implementations may not support I/O-mapped I/O.
        !           245:  */
        !           246: 
        !           247: #if    __USE_PROTO__
        !           248: void (outl) (int port, ulong_t value)
        !           249: #else
        !           250: void
        !           251: outl __ARGS ((port, value))
        !           252: int            port;
        !           253: ulong_t                value;
        !           254: #endif
        !           255: {
        !           256:        outl (port, value);
        !           257: }
        !           258: 
        !           259: 
        !           260: 
        !           261: /*
        !           262:  *-STATUS:
        !           263:  *     DDI/DKI
        !           264:  *
        !           265:  *-NAME:
        !           266:  *     outw            Write a 16-bit short word to a 16-bit I/O port.
        !           267:  *
        !           268:  *-ARGUMENTS:
        !           269:  *     port            A valid 16-bit I/O port.
        !           270:  *     data            The 16-bit value to the written to the port.
        !           271:  *
        !           272:  *-DESCRIPTION:
        !           273:  *     This function provides a C-language interface to the machine
        !           274:  *     instruction that writes a 16-bit short word to a 16-bit I/O port using
        !           275:  *     the I/O address space instead of the memory address space.
        !           276:  *
        !           277:  *-RETURN VALUE:
        !           278:  *     None.
        !           279:  *
        !           280:  *-LEVEL:
        !           281:  *     Base or Interrupt.
        !           282:  *
        !           283:  *-NOTES:
        !           284:  *     Does not sleep.
        !           285:  *
        !           286:  *     Driver-defined basic locks, read/write locks, and sleep locks may be
        !           287:  *     held across calls to this function.
        !           288:  *
        !           289:  *     This function may not be meaningful on all implementations because
        !           290:  *     some implementations may not support I/O-mapped I/O.
        !           291:  */
        !           292: 
        !           293: #if    __USE_PROTO__
        !           294: void (outw) (int port, ushort_t value)
        !           295: #else
        !           296: void
        !           297: outw __ARGS ((port, value))
        !           298: int            port;
        !           299: ushort_t       value;
        !           300: #endif
        !           301: {
        !           302:        outw (port, value);
        !           303: }
        !           304: 
        !           305: 
        !           306: /*
        !           307:  *-STATUS:
        !           308:  *     DDI/DKI
        !           309:  *
        !           310:  *-NAME:
        !           311:  *     repinsb         Read bytes from an I/O port to a buffer.
        !           312:  *
        !           313:  *-ARGUMENTS:
        !           314:  *     port            A valid 8-bit I/O port.
        !           315:  *     addr            The address of the buffer where data is stored after
        !           316:  *                     "cnt" reads of the I/O port.
        !           317:  *     cnt             The number of bytes to be read from the I/O port.
        !           318:  *
        !           319:  *-DESCRIPTION:
        !           320:  *     This function provides a C-language interface to the machine
        !           321:  *     instructions that read a string of bytes from an 8-bit I/O port using
        !           322:  *     the I/O address space instead of the memory address space. The data
        !           323:  *     from "cnt" reads of the I/O port is stored in the data buffer pointed
        !           324:  *     to by "addr". The data buffer should be at least "cnt" bytes in
        !           325:  *     length.
        !           326:  *
        !           327:  *-RETURN VALUE:
        !           328:  *     None.
        !           329:  *
        !           330:  *-LEVEL:
        !           331:  *     Base or Interrupt.
        !           332:  *
        !           333:  *-NOTES:
        !           334:  *     Does not sleep.
        !           335:  *
        !           336:  *     Driver-defined basic locks, read/write locks and sleep locks may be
        !           337:  *     held across calls to this function.
        !           338:  *
        !           339:  *     This function may not be meaningful on all implementations because
        !           340:  *     some implementations may not support I/O-mapped I/O.
        !           341:  */
        !           342: 
        !           343: #if    __USE_PROTO__
        !           344: void (repinsb) (int port, uchar_t * addr, int cnt)
        !           345: #else
        !           346: void
        !           347: repinsb __ARGS ((port, addr, cnt))
        !           348: int            port;
        !           349: uchar_t              * addr;
        !           350: int            cnt;
        !           351: #endif
        !           352: {
        !           353:        repinsb (port, addr, cnt);
        !           354: }
        !           355: 
        !           356: 
        !           357: /*
        !           358:  *-STATUS:
        !           359:  *     DDI/DKI
        !           360:  *
        !           361:  *-NAME:
        !           362:  *     repinsd         Read 32-bit long words from an I/O port to a buffer.
        !           363:  *
        !           364:  *-ARGUMENTS:
        !           365:  *     port            A valid 32-bit I/O port.
        !           366:  *     addr            The address of the buffer where data is stored after
        !           367:  *                     "cnt" reads of the I/O port.
        !           368:  *     cnt             The number of 32-bit long words to be read from the
        !           369:  *                     I/O port.
        !           370:  *
        !           371:  *-DESCRIPTION:
        !           372:  *     This function provides a C-language interface to the machine
        !           373:  *     instructions that read a string of 32-bit long words from a 32-bit I/O
        !           374:  *     port using the I/O address space instead of the memory address space.
        !           375:  *     The data from "cnt" reads of the I/O port is stored in the data buffer
        !           376:  *     pointed to by "addr". The data buffer should be at least "cnt" 32-bit
        !           377:  *     long words in length.
        !           378:  *
        !           379:  *-RETURN VALUE:
        !           380:  *     None.
        !           381:  *
        !           382:  *-LEVEL:
        !           383:  *     Base or Interrupt.
        !           384:  *
        !           385:  *-NOTES:
        !           386:  *     Does not sleep.
        !           387:  *
        !           388:  *     Driver-defined basic locks, read/write locks and sleep locks may be
        !           389:  *     held across calls to this function.
        !           390:  *
        !           391:  *     This function may not be meaningful on all implementations because
        !           392:  *     some implementations may not support I/O-mapped I/O.
        !           393:  */
        !           394: 
        !           395: #if    __USE_PROTO__
        !           396: void (repinsd) (int port, ulong_t * addr, int cnt)
        !           397: #else
        !           398: void
        !           399: repinsd __ARGS ((port, addr, cnt))
        !           400: int            port;
        !           401: ulong_t              * addr;
        !           402: int            cnt;
        !           403: #endif
        !           404: {
        !           405:        repinsd (port, addr, cnt);
        !           406: }
        !           407: 
        !           408: 
        !           409: /*
        !           410:  *-STATUS:
        !           411:  *     DDI/DKI
        !           412:  *
        !           413:  *-NAME:
        !           414:  *     repinsw         Read 16-bit short words from an I/O port to a buffer.
        !           415:  *
        !           416:  *-ARGUMENTS:
        !           417:  *     port            A valid 16-bit I/O port.
        !           418:  *     addr            The address of the buffer where data is stored after
        !           419:  *                     "cnt" reads of the I/O port.
        !           420:  *     cnt             The number of 16-bit short words to be read from the
        !           421:  *                     I/O port.
        !           422:  *
        !           423:  *-DESCRIPTION:
        !           424:  *     This function provides a C-language interface to the machine
        !           425:  *     instructions that read a string of 16-bit short words from a 16-bit
        !           426:  *     I/O port using the I/O address space instead of the memory address
        !           427:  *     space. The data from "cnt" reads of the I/O port is stored in the data
        !           428:  *     buffer pointed to by "addr". The data buffer should be at least "cnt"
        !           429:  *     16-bit short words in length.
        !           430:  *
        !           431:  *-RETURN VALUE:
        !           432:  *     None.
        !           433:  *
        !           434:  *-LEVEL:
        !           435:  *     Base or Interrupt.
        !           436:  *
        !           437:  *-NOTES:
        !           438:  *     Does not sleep.
        !           439:  *
        !           440:  *     Driver-defined basic locks, read/write locks and sleep locks may be
        !           441:  *     held across calls to this function.
        !           442:  *
        !           443:  *     This function may not be meaningful on all implementations because
        !           444:  *     some implementations may not support I/O-mapped I/O.
        !           445:  */
        !           446: 
        !           447: #if    __USE_PROTO__
        !           448: void (repinsw) (int port, ushort_t * addr, int cnt)
        !           449: #else
        !           450: void
        !           451: repinsw __ARGS ((port, addr, cnt))
        !           452: int            port;
        !           453: ushort_t      *        addr;
        !           454: int            cnt;
        !           455: #endif
        !           456: {
        !           457:        repinsw (port, addr, cnt);
        !           458: }
        !           459: 
        !           460: 
        !           461: /*
        !           462:  *-STATUS:
        !           463:  *     DDI/DKI
        !           464:  *
        !           465:  *-NAME:
        !           466:  *     repoutsb        Write bytes from a buffer to an I/O port.
        !           467:  *
        !           468:  *-ARGUMENTS:
        !           469:  *     port            A valid 8-bit I/O port.
        !           470:  *     addr            The address of the buffer from which "cnt" bytes are
        !           471:  *                     written to the I/O port.
        !           472:  *     cnt             The number of bytes to be written to the I/O port.
        !           473:  *
        !           474:  *-DESCRIPTION:
        !           475:  *     This function provides a C-language interface to the machine
        !           476:  *     instructions that write a string of bytes to an 8-bit I/O port using
        !           477:  *     the I/O address space instead of the memory address space. "cnt"
        !           478:  *     bytes starting at the address pointed to by "addr" are written to the
        !           479:  *     I/O port in "cnt" write operations. The buffer should be at least
        !           480:  *     "cnt" bytes in length.
        !           481:  *
        !           482:  *-RETURN VALUE:
        !           483:  *     None.
        !           484:  *
        !           485:  *-LEVEL:
        !           486:  *     Base or Interrupt.
        !           487:  *
        !           488:  *-NOTES:
        !           489:  *     Does not sleep.
        !           490:  *
        !           491:  *     Driver-defined basic locks, read/write locks and sleep locks may be
        !           492:  *     held across calls to this function.
        !           493:  *
        !           494:  *     This function may not be meaningful on all implementations because
        !           495:  *     some implementations may not support I/O-mapped I/O.
        !           496:  */
        !           497: 
        !           498: #if    __USE_PROTO__
        !           499: void (repoutsb) (int port, uchar_t * addr, int cnt)
        !           500: #else
        !           501: void
        !           502: repoutsb __ARGS ((port, addr, cnt))
        !           503: int            port;
        !           504: uchar_t              * addr;
        !           505: int            cnt;
        !           506: #endif
        !           507: {
        !           508:        repoutsb (port, addr, cnt);
        !           509: }
        !           510: 
        !           511: 
        !           512: /*
        !           513:  *-STATUS:
        !           514:  *     DDI/DKI
        !           515:  *
        !           516:  *-NAME:
        !           517:  *     repoutsd        Write 32-bit long words from a buffer to an I/O port.
        !           518:  *
        !           519:  *-ARGUMENTS:
        !           520:  *     port            A valid 32-bit I/O port.
        !           521:  *     addr            The address of the buffer from which "cnt" 32-bit long
        !           522:  *                     words are written to the I/O port.
        !           523:  *     cnt             The number of 32-bit long words to be written to the
        !           524:  *                     I/O port.
        !           525:  *
        !           526:  *-DESCRIPTION:
        !           527:  *     This function provides a C-language interface to the machine
        !           528:  *     instructions that write a string of 32-bit long words to a 32-bit I/O
        !           529:  *     port using the I/O address space instead of the memory address space.
        !           530:  *     "cnt" 32-bit long words starting at the address pointed to by "addr"
        !           531:  *     are written to the I/O port in "cnt" write operations. The buffer
        !           532:  *     should be at least "cnt" 32-bit long words in length.
        !           533:  *
        !           534:  *-RETURN VALUE:
        !           535:  *     None.
        !           536:  *
        !           537:  *-LEVEL:
        !           538:  *     Base or Interrupt.
        !           539:  *
        !           540:  *-NOTES:
        !           541:  *     Does not sleep.
        !           542:  *
        !           543:  *     Driver-defined basic locks, read/write locks and sleep locks may be
        !           544:  *     held across calls to this function.
        !           545:  *
        !           546:  *     This function may not be meaningful on all implementations because
        !           547:  *     some implementations may not support I/O-mapped I/O.
        !           548:  */
        !           549: 
        !           550: #if    __USE_PROTO__
        !           551: void (repoutsd) (int port, ulong_t * addr, int cnt)
        !           552: #else
        !           553: void
        !           554: repoutsd __ARGS ((port, addr, cnt))
        !           555: int            port;
        !           556: ulong_t              * addr;
        !           557: int            cnt;
        !           558: #endif
        !           559: {
        !           560:        repoutsd (port, addr, cnt);
        !           561: }
        !           562: 
        !           563: 
        !           564: /*
        !           565:  *-STATUS:
        !           566:  *     DDI/DKI
        !           567:  *
        !           568:  *-NAME:
        !           569:  *     repoutsw        Write 16-bit short words from a buffer to an I/O port.
        !           570:  *
        !           571:  *-ARGUMENTS:
        !           572:  *     port            A valid 32-bit I/O port.
        !           573:  *     addr            The address of the buffer from which "cnt" 16-bit
        !           574:                        short words are written to the I/O port.
        !           575:  *     cnt             The number of 16-bit short words to be written to the
        !           576:  *                     I/O port.
        !           577:  *
        !           578:  *-DESCRIPTION:
        !           579:  *     This function provides a C-language interface to the machine
        !           580:  *     instructions that write a string of 16-bit short words to a 16-bit I/O
        !           581:  *     port using the I/O address space instead of the memory address space.
        !           582:  *     "cnt" 16-bit short words starting at the address pointed to by "addr"
        !           583:  *     are written to the I/O port in "cnt" write operations. The buffer
        !           584:  *     should be at least "cnt" 16-bit short words in length.
        !           585:  *
        !           586:  *-RETURN VALUE:
        !           587:  *     None.
        !           588:  *
        !           589:  *-LEVEL:
        !           590:  *     Base or Interrupt.
        !           591:  *
        !           592:  *-NOTES:
        !           593:  *     Does not sleep.
        !           594:  *
        !           595:  *     Driver-defined basic locks, read/write locks and sleep locks may be
        !           596:  *     held across calls to this function.
        !           597:  *
        !           598:  *     This function may not be meaningful on all implementations because
        !           599:  *     some implementations may not support I/O-mapped I/O.
        !           600:  */
        !           601: 
        !           602: #if    __USE_PROTO__
        !           603: void (repoutsw) (int port, ushort_t * addr, int cnt)
        !           604: #else
        !           605: void
        !           606: repoutsw __ARGS ((port, addr, cnt))
        !           607: int            port;
        !           608: ushort_t      *        addr;
        !           609: int            cnt;
        !           610: #endif
        !           611: {
        !           612:        repoutsw (port, addr, cnt);
        !           613: }

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.