|
|
coherent
ttnn -- Device Driver /ddeevv/ttnn* provides access to an ARCNET local area network via a Tiac 236 card, Tiac 238 card or equivalent (e.g., Pure Data ARCNET card). Each entry is assigned major device number 20, and may be accessed as a character-special device. The ttnn driver supports up to four ARCNET cards in a single computer. Minor devices 0, 1, 2, and 3 refer to each card. For a card to work properly, it must have a unique interrupt, 64-kilobyte memory bank, and port number assigned to it. The driver must also be configured to the same interrupt, memory bank, and port number. You can use the command /ccoonnff/ppaattcchh to build a properly configured version of the kernel; see the Lexicon article hhss for sample commands. If loadable device drivers are used they may be configured in the identical fashion. For an interface to be accessible from the COHERENT system, a device file must be present in directory /ddeevv with the appropriate type, major and minor device numbers, and permissions. You can use the command mmkknnoodd to creates a special file for a device, as follows: /eettcc/mmkknnoodd /ddeevv/ttnn00 cc 2200 00 /eettcc/mmkknnoodd /ddeevv/ttnn11 cc 2200 11 It is usual to have a generic LAN interface /ddeevv/ttnn. This is associated with a particular LAN card by the following command: /bbiinn/llnn -ff /ddeevv/ttnn00 /ddeevv/ttnn This device driver provides a raw interface to the LAN. To communicate with other computers on the network, it is normally necessary to add some higher level protocol (e.g., XNS or TCP/IP). _F_i_l_e_s /ddeevv/ttnn* -- LAN network access special file /ddeevv/ttnn -- Default LAN _S_e_e _A_l_s_o ddeevviiccee ddrriivveerrss, llnn, mmkknnoodd _N_o_t_e_s As delivered, the LAN driver supports one card with interrupt 2, port 0x2E0, and bank 0xD000.
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.