![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to config.h CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [MW Coherent from dump] / coherent / g / usr / bin / pax|
Return to config.h CVS log | Up to [MW Coherent from dump] / coherent / g / usr / bin / pax |
1.1 root 1: /* $Source: /src386/usr/bin/pax/config.h,v $
2: *
3: * $Revision: 1.1 $
4: *
5: * config.h - configuration options for PAX
6: *
7: * DESCRIPTION
8: *
9: * This file contains a number of configurable parameters for the
10: * PAX software. This files should be edited prior to makeing the
11: * package.
12: *
13: * AUTHOR
14: *
15: * Mark H. Colburn, NAPS International ([email protected])
16: *
17: * Sponsored by The USENIX Association for public distribution.
18: *
19: * Copyright (c) 1989 Mark H. Colburn.
20: * All rights reserved.
21: *
22: * Redistribution and use in source and binary forms are permitted
23: * provided that the above copyright notice and this paragraph are
24: * duplicated in all such forms and that any documentation,
25: * advertising materials, and other materials related to such
26: * distribution and use acknowledge that the software was developed
27: * by Mark H. Colburn and sponsored by The USENIX Association.
28: *
29: * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
30: * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
31: * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
32: */
33:
34: #ifndef _PAX_CONFIG_H
35: #define _PAX_CONFIG_H
36:
37: /* Defines */
38:
39: /* XENIX_286 (SCO ugh, Xenix system V(?) 286, USG with changes...
40: * You will get a warning about DIRSIZ being redefined, ignore it,
41: * complain to SCO about include files that are messed up or send
42: * mail to [email protected], who can provide some patches to fix
43: * your include files.
44: *
45: * Defining XENIX_286 will automatically define USG.
46: *
47: */
48: #define XENIX_286 /* Running on a XENIX 286 system */
49:
50: /*
51: * USG - USG (Unix System V) specific modifications
52: *
53: * Define USG if you are running Unix System V or some similar variant
54: */
55: #define USG /* Running on a USG System */
56:
57: /*
58: * BSD - BSD (Berkely) specific modifications
59: *
60: * Define BSD if you are running some version of BSD Unix
61: */
62: /*#define BSD*/ /* Running on a BSD System */
63:
64: /*
65: * DEF_AR_FILE - tar only (required)
66: *
67: * DEF_AR_FILE should contain the full pathname of your favorite archive
68: * device. Normally this would be a tape drive, but it may be a disk drive
69: * on those systems that don't have tape drives.
70: */
71: #define DEF_AR_FILE "/dev/floppy" /* The default archive on your system */
72:
73: /*
74: * TTY - device which interactive queries should be directed to (required)
75: *
76: * This is the device to which interactive queries will be sent to and
77: * received from. On most unix systems, this should be /dev/tty, however, on
78: * some systems, such as MS-DOS, it my need to be different (e.g. "con:").
79: */
80: #define TTY "/dev/tty" /* for most versions of UNIX */
81: /* #define TTY "con:"*/ /* For MS-DOS */
82:
83: /*
84: * PAXDIR - if you do not have directory access routines
85: *
86: * Define PAXDIR if you do not have Doug Gwyn's dirent package installed
87: * as a system library or you wish to use the version supplied with PAX.
88: *
89: * NOTE: DO NOT DEFINE THIS IF YOU HAVE BERKELEY DIRECTORY ACCESS ROUTINES.
90: */
91: /* #define PAXDIR*/ /* use paxdir.h paxdir.c */
92:
93: /*
94: * DIRENT - directory access routines (required)
95: *
96: * If you have Doug Gwyn's dirent package installed, either as a system
97: * library, or are using the paxdir.c and paxdir.h routines which come with
98: * PAX, then define dirent.
99: *
100: * NOTE: DO NOT DEFINE THIS IF YOU HAVE BERKELEY DIRECTORY ACCESS ROUTINES.
101: */
102: #define DIRENT /* use POSIX compatible directory routines */
103:
104: /*
105: * OFFSET - compiler dependent offset type
106: *
107: * OFFSET is the type which is returned by lseek(). It is different on
108: * some systems. Most define it to be off_t, but some define it to be long.
109: */
110: #define OFFSET off_t /* for most BSD, USG and other systems */
111: /* #define OFFSET long*/ /* for most of the rest of them... */
112:
113: /*
114: * VOID - compiler support for VOID types
115: *
116: * If your system does not support void, then this should be defined to
117: * int, otherwise, it should be left undefined.
118: *
119: * For ANSI Systems this should always be blank.
120: */
121: #ifndef __STDC__
122: /* #define void int*/ /* for system which do support void */
123: #endif
124:
125: /*
126: * SIG_T - return type for the signal routine
127: *
128: * Some systems have signal defines to return an int *, other return a
129: * void *. Please choose the correct value for your system.
130: */
131: #define SIG_T void /* signal defined as "void (*signal)()" */
132: /*#define SIG_T int*/ /* signal defined as "int (*signal)()" */
133:
134: /*
135: * STRCSPN - use the strcspn function included with pax
136: *
137: * Some systems do not have the strcspn() function in their C libraries.
138: * For those system define STRCSPN and the one provided in regexp.c will
139: * be used.
140: */
141: /*#define STRCSPN*/ /* implementation does not have strcspn() */
142:
143: /*
144: * END OF CONFIGURATION SECTION
145: *
146: * Nothing beyond this point should need to be changed
147: */
148:
149: #ifdef BSD
150: #ifdef USG
151: #include "You must first edit config.h and Makefile to configure pax."
152: #endif
153: #endif
154: /*
155: * Do a little sanity checking
156: */
157: #ifdef PAXDIR
158: # ifndef DIRENT
159: # define DIRENT
160: # endif
161: #endif
162:
163: #ifdef XENIX_286
164: # define USG
165: #endif /* XENIX_286 */
166:
167: #endif /* _PAX_CONFIG_H */
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.