Return to Makefile.in CVS log

Up to [MW Coherent from dump] / coherent / g / usr / lib / uucp / tay104

Annotation of coherent/g/usr/lib/uucp/tay104/Makefile.in, revision 1.1

1.1     ! root        1: # This is the Makefile for Taylor UUCP
        !             2: #
        !             3: # The file Makefile.in should be processed by configure to generate
        !             4: # Makefile.  If you want to generate Makefile by hand, you must find
        !             5: # all variables surrounded by @ and replace them with the correct
        !             6: # value (e.g. @CC@ must be replaced by something like cc or gcc).
        !             7: #
        !             8: # Once you have done that, you should check the definitions at the top
        !             9: # of this file to make sure that they are reasonable for your system.
        !            10: 
        !            11: # Prefix directory for installation directories.
        !            12: prefix = /usr/local
        !            13: 
        !            14: # The user name that should own the resulting executables, several of
        !            15: # which are suid.
        !            16: owner = uucp
        !            17: 
        !            18: # Where to install uucico, uuxqt, uuchk and uuconv.  If you use this
        !            19: # definition, $(prefix)/lib must exist.
        !            20: sbindir = $(prefix)/lib/uucp
        !            21: 
        !            22: # Where to install uucp, uux, uustat, uuname, uulog, uuto, uupick and
        !            23: # cu.
        !            24: bindir = $(prefix)/bin
        !            25: 
        !            26: # Where to install man pages.  Section 1 for user programs, 8 for daemons.
        !            27: man1dir = $(prefix)/man/man1
        !            28: man1ext = .1
        !            29: man8dir = $(prefix)/man/man8
        !            30: man8ext = .8
        !            31: 
        !            32: # Where to install the info files.
        !            33: infodir = $(prefix)/info
        !            34: 
        !            35: # The directory to look in for new style configuration files (when
        !            36: # using HAVE_TAYLOR_CONFIG).  Note that by default this is different
        !            37: # from sbindir, unlike traditional UUCP packages.
        !            38: newconfigdir = $(prefix)/conf/uucp
        !            39: 
        !            40: # The directory to look in for BNU (when using HAVE_BNU_CONFIG) or
        !            41: # V2 (when using HAVE_V2_CONFIG) style configuration files.
        !            42: oldconfigdir = /usr/lib/uucp
        !            43: 
        !            44: # If you don't want to compile tstuu, which requires BSD style ptys
        !            45: # and the Taylor configuration files, comment out the following line
        !            46: # The tstuu program is only used to test the package; it is described
        !            47: # further in the documentation.
        !            48: TSTUU = tstuu
        !            49: 
        !            50: #
        !            51: # The next few lines are set up by the configuration script.  You may
        !            52: # want to look them over.
        !            53: #
        !            54: 
        !            55: # If you do not have the mkdir system call, undefine the following three
        !            56: # lines.  This will install uudir as an suid root program.  This is
        !            57: # necessary because invoking /bin/mkdir from an suid program will
        !            58: # leave the directories owned by the wrong user.
        !            59: @UUDIR@UUDIR = uudir
        !            60: @UUDIR@uudirdir = $(sbindir)/util
        !            61: @UUDIR@UUDIRFLAGS = -DUUDIR_PROGRAM=\"$(uudirdir)/$(UUDIR)\"
        !            62: 
        !            63: # Source directory and, if necessary, VPATH
        !            64: srcdir = @srcdir@
        !            65: VPATH = @srcdir@
        !            66: 
        !            67: # Define programs and flags
        !            68: CC = @CC@
        !            69: CFLAGS = @CFLAGS@
        !            70: LDFLAGS = @LDFLAGS@
        !            71: LIBS = @LIBS@
        !            72: 
        !            73: INSTALL = @INSTALL@
        !            74: INSTALL_PROGRAM = @INSTALL_PROGRAM@
        !            75: INSTALL_DATA = @INSTALL_DATA@
        !            76: 
        !            77: RANLIB = @RANLIB@
        !            78: 
        !            79: LN_S = @LN_S@
        !            80: 
        !            81: MAKEINFO = makeinfo
        !            82: TEXI2DVI = texi2dvi
        !            83: DVITPS = dvips
        !            84: 
        !            85: #
        !            86: # Nothing else to configure
        !            87: #
        !            88: 
        !            89: SHELL = /bin/sh
        !            90: 
        !            91: VERSION = 1.04
        !            92: 
        !            93: MORECFLAGS = -I$(srcdir) -I. -DSBINDIR=\"$(sbindir)\" -DOWNER=\"$(owner)\" -DVERSION=\"$(VERSION)\" $(UUDIRFLAGS)
        !            94: 
        !            95: MDEFINES = CC='$(CC)' CFLAGS='$(CFLAGS)' RANLIB='$(RANLIB)' LN_S='$(LN_S)' newconfigdir='$(newconfigdir)' oldconfigdir='$(oldconfigdir)' owner='$(owner)' sbindir='$(sbindir)' UUDIRFLAGS='$(UUDIRFLAGS)' VERSION='$(VERSION)'
        !            96: 
        !            97: PROGRAMS = uucico uuxqt uux uucp uuchk uuconv uustat uuname uusched \
        !            98:        uulog uuto uupick cu
        !            99: 
        !           100: UUOBJS = uucico.o trans.o send.o rec.o xcmd.o prot.o protg.o protf.o \
        !           101:        prott.o prote.o proti.o protj.o protz.o time.o log.o chat.o \
        !           102:        conn.o tcp.o tli.o util.o copy.o
        !           103: XQTOBJS = uuxqt.o util.o log.o copy.o
        !           104: UUXOBJS = uux.o util.o log.o copy.o
        !           105: UUCPOBJS = uucp.o util.o log.o copy.o
        !           106: UUSTATOBJS = uustat.o util.o log.o copy.o
        !           107: UUNAMEOBJS = uuname.o log.o
        !           108: UULOGOBJS = uulog.o log.o
        !           109: UUPICKOBJS = uupick.o log.o copy.o
        !           110: CUOBJS = cu.o prot.o log.o chat.o conn.o tcp.o tli.o copy.o
        !           111: UUCHKOBJS = uuchk.o
        !           112: UUCONVOBJS = uuconv.o
        !           113: TSTOBJS = tstuu.o
        !           114: 
        !           115: ALLOBJS = uucico.o uuxqt.o uux.o uucp.o uuchk.o uuconv.o uustat.o \
        !           116:        uuname.o uulog.o uupick.o cu.o uudir.o tstuu.o trans.o send.o \
        !           117:        rec.o xcmd.o prot.o protg.o protf.o prott.o prote.o proti.o \
        !           118:        protj.o protz.o util.o time.o log.o chat.o conn.o tcp.o tli.o \
        !           119:        copy.o
        !           120: 
        !           121: UULIBS = unix/libunix.a uuconf/libuuconf.a lib/libuucp.a
        !           122: 
        !           123: all: $(PROGRAMS) $(TSTUU) $(UUDIR)
        !           124: 
        !           125: install: $(PROGRAMS) $(UUDIR)
        !           126:        if test -d $(sbindir); then true; else mkdir $(sbindir); fi
        !           127:        if test -d $(bindir); then true; else mkdir $(bindir); fi
        !           128:        -if test -f $(sbindir)/uucico.old; then rm -f $(sbindir)/uucico; else mv $(sbindir)/uucico $(sbindir)/uucico.old; fi
        !           129:        -if test -f $(sbindir)/uuxqt.old; then rm -f $(sbindir)/uuxqt; else mv $(sbindir)/uuxqt $(sbindir)/uuxqt.old; fi
        !           130:        -if test -f $(sbindir)/uusched.old; then rm -f $(sbindir)/uusched; else mv $(sbindir)/uusched $(sbindir)/uusched.old; fi
        !           131:        $(INSTALL_PROGRAM) uucico $(sbindir)/uucico
        !           132:        $(INSTALL_PROGRAM) uuxqt $(sbindir)/uuxqt
        !           133:        $(INSTALL_PROGRAM) uuchk $(sbindir)/uuchk
        !           134:        $(INSTALL_PROGRAM) uuconv $(sbindir)/uuconv
        !           135:        $(INSTALL_PROGRAM) uusched $(sbindir)/uusched
        !           136:        chown $(owner) $(sbindir)/uucico $(sbindir)/uuxqt
        !           137:        chmod 4555 $(sbindir)/uucico $(sbindir)/uuxqt
        !           138:        chown $(owner) $(sbindir)/uuchk $(sbindir)/uuconv
        !           139:        if test "$(UUDIR)X" != "X"; then \
        !           140:          if test -d $(uudirdir); then \
        !           141:            true \
        !           142:          else \
        !           143:            mkdir $(uudirdir); \
        !           144:          fi; \
        !           145:          chown $(owner) $(uudirdir); \
        !           146:          chmod 100 $(uudirdir); \
        !           147:          $(INSTALL_PROGRAM) uudir $(uudirdir)/uudir; \
        !           148:          chown root $(uudirdir)/uudir; \
        !           149:          chmod 4555 $(uudirdir)/uudir; \
        !           150:        else \
        !           151:          true; \
        !           152:        fi
        !           153:        -for i in uux uucp uustat uuname uulog uuto uupick cu; do \
        !           154:          if test -f $(bindir)/$$i.old; then \
        !           155:            rm -f $(bindir)/$$i; \
        !           156:          else \
        !           157:            mv $(bindir)/$$i $(bindir)/$$i.old; \
        !           158:          fi; \
        !           159:          $(INSTALL_PROGRAM) $$i $(bindir)/$$i; \
        !           160:        done
        !           161:        chown $(owner) $(bindir)/uux $(bindir)/uucp $(bindir)/uustat 
        !           162:        chown $(owner) $(bindir)/uuname $(bindir)/cu
        !           163:        chmod 4555 $(bindir)/uux $(bindir)/uucp $(bindir)/uustat 
        !           164:        chmod 4555 $(bindir)/uuname $(bindir)/cu
        !           165:        $(INSTALL_DATA) $(srcdir)/uucico.8 $(man8dir)/uucico$(man8ext)
        !           166:        $(INSTALL_DATA) $(srcdir)/uuxqt.8 $(man8dir)/uuxqt$(man8ext)
        !           167:        $(INSTALL_DATA) $(srcdir)/uux.1 $(man1dir)/uux$(man1ext)
        !           168:        $(INSTALL_DATA) $(srcdir)/uucp.1 $(man1dir)/uucp$(man1ext)
        !           169:        $(INSTALL_DATA) $(srcdir)/uustat.1 $(man1dir)/uustat$(man1ext)
        !           170:        $(INSTALL_DATA) $(srcdir)/cu.1 $(man1dir)/cu$(man1ext)
        !           171:        @echo Use \"make install-info\" to install the info pages.
        !           172: 
        !           173: uninstall:
        !           174:        rm -f $(sbindir)/uucico $(sbindir)/uuxqt $(sbindir)/uusched
        !           175:        -cp $(sbindir)/uucico.old $(sbindir)/uucico
        !           176:        -cp $(sbindir)/uuxqt.old $(sbindir)/uuxqt
        !           177:        -cp $(sbindir)/uusched.old $(sbindir)/uusched
        !           178:        -chown $(owner) $(sbindir)/uucico $(sbindir)/uuxqt
        !           179:        -chmod 4555 $(sbindir)/uucico $(sbindir)/uuxqt
        !           180:        -chown $(owner) $(sbindir)/uuchk $(sbindir)/uuconv
        !           181:        rm -f $(bindir)/uux $(bindir)/uucp $(bindir)/uustat
        !           182:        rm -f $(bindir)/uuname $(bindir)/uulog $(bindir)/uuto
        !           183:        rm -f $(bindir)/uupick $(bindir)/cu
        !           184:        -cp $(bindir)/uux.old $(bindir)/uux
        !           185:        -cp $(bindir)/uucp.old $(bindir)/uucp
        !           186:        -cp $(bindir)/uustat.old $(bindir)/uustat
        !           187:        -cp $(bindir)/uuname.old $(bindir)/uuname
        !           188:        -cp $(bindir)/uulog.old $(bindir)/uulog
        !           189:        -cp $(bindir)/uuto.old $(bindir)/uuto
        !           190:        -cp $(bindir)/uupick.old $(bindir)/uupick
        !           191:        -cp $(bindir)/cu.old $(bindir)/cu
        !           192:        -chown $(owner) $(bindir)/uux $(bindir)/uucp $(bindir)/uustat 
        !           193:        -chown $(owner) $(bindir)/uuname $(bindir)/cu
        !           194:        -chmod 4555 $(bindir)/uux $(bindir)/uucp $(bindir)/uustat 
        !           195:        -chmod 4555 $(bindir)/uuname $(bindir)/cu
        !           196: 
        !           197: uucico: $(UUOBJS) $(UULIBS)
        !           198:        $(CC) $(LDFLAGS) -o uucico $(UUOBJS) $(UULIBS) $(LIBS)
        !           199: 
        !           200: uuxqt: $(XQTOBJS) $(UULIBS)
        !           201:        $(CC) $(LDFLAGS) -o uuxqt $(XQTOBJS) $(UULIBS) $(LIBS)
        !           202: 
        !           203: uux: $(UUXOBJS) $(UULIBS)
        !           204:        $(CC) $(LDFLAGS) -o uux $(UUXOBJS) $(UULIBS) $(LIBS)
        !           205: 
        !           206: uucp: $(UUCPOBJS) $(UULIBS)
        !           207:        $(CC) $(LDFLAGS) -o uucp $(UUCPOBJS) $(UULIBS) $(LIBS)
        !           208: 
        !           209: uustat: $(UUSTATOBJS) $(UULIBS)
        !           210:        $(CC) $(LDFLAGS) -o uustat $(UUSTATOBJS) $(UULIBS) $(LIBS)
        !           211: 
        !           212: uuname: $(UUNAMEOBJS) $(UULIBS)
        !           213:        $(CC) $(LDFLAGS) -o uuname $(UUNAMEOBJS) $(UULIBS) $(LIBS)
        !           214: 
        !           215: uulog: $(UULOGOBJS) $(UULIBS)
        !           216:        $(CC) $(LDFLAGS) -o uulog $(UULOGOBJS) $(UULIBS) $(LIBS)
        !           217: 
        !           218: uusched: uusched.in Makefile
        !           219:        -rm -f uusched
        !           220:        sed 's,@SBINDIR@,$(sbindir),' < $(srcdir)/uusched.in > uusched
        !           221:        chmod 0555 uusched
        !           222: 
        !           223: uuto: uuto.in Makefile
        !           224:        -rm -f uuto
        !           225:        sed 's,@BINDIR@,$(bindir),' < $(srcdir)/uuto.in > uuto
        !           226:        chmod 0555 uuto
        !           227: 
        !           228: uupick: $(UUPICKOBJS) $(UULIBS)
        !           229:        $(CC) $(LDFLAGS) -o uupick $(UUPICKOBJS) $(UULIBS) $(LIBS)
        !           230: 
        !           231: cu: $(CUOBJS) $(UULIBS)
        !           232:        $(CC) $(LDFLAGS) -o cu $(CUOBJS) $(UULIBS) $(LIBS)
        !           233: 
        !           234: uuchk: $(UUCHKOBJS) $(UULIBS)
        !           235:        $(CC) $(LDFLAGS) -o uuchk $(UUCHKOBJS) $(UULIBS) $(LIBS)
        !           236: 
        !           237: uuconv: $(UUCONVOBJS) $(UULIBS)
        !           238:        $(CC) $(LDFLAGS) -o uuconv $(UUCONVOBJS) $(UULIBS) $(LIBS)
        !           239: 
        !           240: tstuu: $(TSTOBJS) $(UULIBS)
        !           241:        $(CC) $(LDFLAGS) -o tstuu $(TSTOBJS) $(UULIBS) $(LIBS)
        !           242: 
        !           243: uudir: uudir.o $(UULIBS)
        !           244:        $(CC) $(LDFLAGS) -o uudir uudir.o $(UULIBS) $(LIBS)
        !           245: 
        !           246: .c.o:
        !           247:        $(CC) -c $(CFLAGS) $(MORECFLAGS) $<
        !           248: 
        !           249: uuconv.o: uuconv.c
        !           250:        $(CC) -c $(CFLAGS) $(MORECFLAGS) -I$(srcdir)/uuconf -Iuuconf $(srcdir)/uuconv.c
        !           251: 
        !           252: sysdep.h: sysh.unx
        !           253:        rm -f sysdep.h
        !           254:        $(LN_S) $(srcdir)/sysh.unx sysdep.h || cp $(srcdir)/sysh.unx sysdep.h
        !           255: 
        !           256: uuconf/libuuconf.a: FORCE
        !           257:        (cd uuconf; $(MAKE) $(MDEFINES) libuuconf.a)
        !           258: 
        !           259: unix/libunix.a: FORCE sysdep.h
        !           260:        (cd unix; $(MAKE) $(MDEFINES) libunix.a)
        !           261: 
        !           262: lib/libuucp.a: FORCE
        !           263:        (cd lib; $(MAKE) $(MDEFINES) libuucp.a)
        !           264: 
        !           265: FORCE:;
        !           266: 
        !           267: clean:
        !           268:        (cd unix; $(MAKE) $(MDEFINES) clean)
        !           269:        (cd uuconf; $(MAKE) $(MDEFINES) clean)
        !           270:        (cd lib; $(MAKE) $(MDEFINES) clean)
        !           271:        rm -f $(ALLOBJS) $(PROGRAMS) tstuu sysdep.h
        !           272:        rm -f uucp-$(VERSION).tar.Z
        !           273:        rm -rf uucp-$(VERSION)
        !           274: 
        !           275: distclean:
        !           276:        (cd unix; $(MAKE) $(MDEFINES) distclean)
        !           277:        (cd uuconf; $(MAKE) $(MDEFINES) distclean)
        !           278:        (cd lib; $(MAKE) $(MDEFINES) distclean)
        !           279:        rm -f $(ALLOBJS) $(PROGRAMS) tstuu sysdep.h
        !           280:        rm -f uucp-$(VERSION).tar.Z
        !           281:        rm -rf uucp-$(VERSION)
        !           282:        rm -f Makefile conf.h config.status
        !           283: 
        !           284: mostlyclean: clean
        !           285: 
        !           286: realclean: distclean
        !           287: 
        !           288: # The distribution targets are mostly for my own use; they are not
        !           289: # expected to work on all other systems.
        !           290: 
        !           291: dist:
        !           292:        -rm -rf uucp-$(VERSION)
        !           293:        -rm -f uucp-$(VERSION).tar uucp-$(VERSION).tar.Z
        !           294:        mkdir uucp-$(VERSION)
        !           295:        ln `cat MANIFEST` uucp-$(VERSION)
        !           296:        rm -f uucp-$(VERSION)/policy.h uucp-$(VERSION)/Makefile.in
        !           297:        cp policy.h Makefile.in uucp-$(VERSION)
        !           298:        chmod 0644 uucp-$(VERSION)/policy.h uucp-$(VERSION)/Makefile.in
        !           299:        chmod 0644 uucp-$(VERSION)/uucp.texi
        !           300:        mkdir uucp-$(VERSION)/contrib
        !           301:        ln contrib/* uucp-$(VERSION)/contrib
        !           302:        mkdir uucp-$(VERSION)/sample
        !           303:        ln sample/* uucp-$(VERSION)/sample
        !           304:        (cd unix; $(MAKE) $(MDEFINES) dist)
        !           305:        (cd uuconf; $(MAKE) $(MDEFINES) dist)
        !           306:        (cd lib; $(MAKE) $(MDEFINES) dist)
        !           307:        tar -cvf uucp-$(VERSION).tar uucp-$(VERSION)
        !           308:        compress uucp-$(VERSION).tar
        !           309: 
        !           310: doc-dist: uucp.texi uucp.info uucp.dvi uucp.ps
        !           311:        -rm -rf uucp-doc-$(VERSION) uucp-doc-dist
        !           312:        -rm -f uucp-doc-$(VERSION).tar uucp-doc-$(VERSION).tar.Z
        !           313:        mkdir uucp-doc-$(VERSION)
        !           314:        ln README-DOC uucp-doc-$(VERSION)
        !           315:        ln $(srcdir)/uucp.texi uucp-doc-$(VERSION)
        !           316:        for i in uucp.info*; do ln $$i uucp-doc-$(VERSION); done
        !           317:        ln uucp.dvi uucp-doc-$(VERSION)
        !           318:        ln uucp.cp uucp.fn uucp.aux uucp-doc-$(VERSION)
        !           319:        ln texinfo.tex uucp-doc-$(VERSION)
        !           320:        mkdir uucp-doc-dist
        !           321:        mv uucp-doc-$(VERSION) uucp-doc-dist/uucp-$(VERSION)
        !           322:        cd uucp-doc-dist; tar -cvf ../uucp-doc-$(VERSION).tar uucp-$(VERSION)
        !           323:        compress uucp-doc-$(VERSION).tar
        !           324:        -rm -rf uucp-doc-dist
        !           325: 
        !           326: info: uucp.info
        !           327: 
        !           328: uucp.info: uucp.texi
        !           329:        $(MAKEINFO) $<
        !           330: 
        !           331: install-info: uucp.info
        !           332:        for i in uucp.info*; do \
        !           333:          $(INSTALL_DATA) $$i $(infodir)/$$i; \
        !           334:        done
        !           335: 
        !           336: dvi: uucp.dvi
        !           337: 
        !           338: uucp.dvi: uucp.texi
        !           339:        $(TEXI2DVI) $<
        !           340: 
        !           341: ps: uucp.ps
        !           342: 
        !           343: uucp.ps: uucp.dvi
        !           344:        $(DVITPS) -o uucp.ps $<
        !           345: 
        !           346: # Having Makefile depend on conf.h.in insures that conf.h will get
        !           347: # rebuilt when conf.h.in changes.  We don't want conf.h to change
        !           348: # unnecessarily, nor do we want to run config.status unnecessarily.
        !           349: # This won't work on versions of make that don't check dependencies
        !           350: # for Makefile, but I'm the only person likely to change conf.h.in
        !           351: # anyhow.
        !           352: Makefile: config.status Makefile.in conf.h.in
        !           353:        sh config.status
        !           354: 
        !           355: config.status: configure
        !           356:        configure --no-create
        !           357: 
        !           358: configure: configure.in
        !           359:        autoconf
        !           360: 
        !           361: TAGS:
        !           362:        etags *.h *.c
        !           363: 
        !           364: # Header file dependencies.  These are maintained by hand.
        !           365: 
        !           366: $(ALLOBJS): uucp.h conf.h policy.h
        !           367: 
        !           368: uucico.o: uudefs.h uuconf.h system.h prot.h conn.h trans.h getopt.h
        !           369: uuxqt.o: uudefs.h uuconf.h system.h getopt.h
        !           370: uux.o: uudefs.h uuconf.h system.h getopt.h sysdep.h
        !           371: uucp.o: uudefs.h uuconf.h system.h getopt.h
        !           372: uustat.o: uudefs.h uuconf.h system.h getopt.h
        !           373: uuname.o: uudefs.h uuconf.h system.h getopt.h
        !           374: uulog.o: uudefs.h uuconf.h system.h getopt.h
        !           375: uupick.o: uudefs.h uuconf.h system.h getopt.h
        !           376: cu.o: cu.h uudefs.h uuconf.h sysdep.h conn.h prot.h system.h getopt.h
        !           377: uuchk.o: uuconf.h getopt.h
        !           378: uuconv.o: $(srcdir)/uuconf/uucnfi.h uuconf.h getopt.h
        !           379: uudir.o: sysdep.h
        !           380: tstuu.o: sysdep.h getopt.h system.h
        !           381: trans.o: uudefs.h uuconf.h system.h prot.h trans.h
        !           382: send.o: uudefs.h uuconf.h system.h prot.h trans.h
        !           383: rec.o: uudefs.h uuconf.h system.h prot.h trans.h
        !           384: xcmd.o: uudefs.h uuconf.h system.h prot.h trans.h
        !           385: prot.o: uudefs.h system.h prot.h conn.h
        !           386: protg.o: uudefs.h uuconf.h prot.h conn.h system.h trans.h
        !           387: protf.o: uudefs.h uuconf.h prot.h conn.h system.h trans.h
        !           388: prott.o: uudefs.h uuconf.h prot.h conn.h system.h trans.h
        !           389: prote.o: uudefs.h uuconf.h prot.h conn.h system.h trans.h
        !           390: proti.o: uudefs.h uuconf.h prot.h conn.h system.h trans.h
        !           391: protj.o: uudefs.h prot.h conn.h system.h trans.h
        !           392: protz.o: uudefs.h uuconf.h prot.h conn.h system.h trans.h
        !           393: log.o: uudefs.h uuconf.h system.h
        !           394: chat.o: uudefs.h uuconf.h system.h prot.h conn.h
        !           395: conn.o: uudefs.h uuconf.h conn.h
        !           396: tcp.o: uudefs.h uuconf.h conn.h sysdep.h system.h
        !           397: tli.o: uudefs.h uuconf.h conn.h sysdep.h system.h
        !           398: time.o: uudefs.h uuconf.h
        !           399: util.o: uudefs.h uuconf.h system.h
        !           400: copy.o: uudefs.h system.h sysdep.h
        !           401: 
        !           402: .NOEXPORT:

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.