![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to serial.c CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [MW Coherent from dump] / coherent / g / usr / lib / uucp / tay104 / unix|
Return to serial.c CVS log | Up to [MW Coherent from dump] / coherent / g / usr / lib / uucp / tay104 / unix |
coherent
/* serial.c
The serial port communication routines for Unix.
Copyright (C) 1991, 1992 Ian Lance Taylor
This file is part of the Taylor UUCP package.
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
The author of the program may be contacted at [email protected] or
c/o Infinity Development Systems, P.O. Box 520, Waltham, MA 02254.
*/
#include "uucp.h"
#if USE_RCS_ID
const char serial_rcsid[] = "$Id: serial.c,v 1.1.1.1 2019/05/29 04:56:35 root Exp $";
#endif
#include "uudefs.h"
#include "uuconf.h"
#include "system.h"
#include "conn.h"
#include "sysdep.h"
#include <errno.h>
#include <ctype.h>
#if HAVE_SYS_PARAM_H
#include <sys/param.h>
#endif
#if HAVE_LIMITS_H
#include <limits.h>
#endif
#if HAVE_TLI
#if HAVE_TIUSER_H
#include <tiuser.h>
#else /* ! HAVE_TIUSER_H */
#if HAVE_XTI_H
#include <xti.h>
#endif /* HAVE_XTI_H */
#endif /* ! HAVE_TIUSER_H */
#endif /* HAVE_TLI */
#if HAVE_FCNTL_H
#include <fcntl.h>
#else
#if HAVE_SYS_FILE_H
#include <sys/file.h>
#endif
#endif
#ifndef O_RDONLY
#define O_RDONLY 0
#define O_WRONLY 1
#define O_RDWR 2
#endif
#ifndef O_NOCTTY
#define O_NOCTTY 0
#endif
#ifndef FD_CLOEXEC
#define FD_CLOEXEC 1
#endif
#if HAVE_SYS_IOCTL_H
#include <sys/ioctl.h>
#endif
#if HAVE_BSD_TTY
#include <sys/time.h>
#if HAVE_SYS_SELECT_H
#include <sys/select.h>
#endif
#endif
#if HAVE_TIME_H
#if HAVE_SYS_TIME_AND_TIME_H || ! HAVE_BSD_TTY
#include <time.h>
#endif
#endif
#if HAVE_STRIP_BUG && HAVE_BSD_TTY
#include <termio.h>
#endif
#if HAVE_SVR4_LOCKFILES
/* Get the right definitions for major and minor. */
#if MAJOR_IN_MKDEV
#include <sys/mkdev.h>
#endif /* MAJOR_IN_MKDEV */
#if MAJOR_IN_SYSMACROS
#include <sys/sysmacros.h>
#endif /* MAJOR_IN_SYSMACROS */
#if ! MAJOR_IN_MKDEV && ! MAJOR_IN_SYSMACROS
#ifndef major
#define major(i) (((i) >> 8) & 0xff)
#endif
#ifndef minor
#define minor(i) ((i) & 0xff)
#endif
#endif /* ! MAJOR_IN_MKDEV && ! MAJOR_IN_SYSMACROS */
#endif /* HAVE_SVR4_LOCKFILES */
/* Get definitions for both O_NONBLOCK and O_NDELAY. */
#ifndef O_NDELAY
#ifdef FNDELAY
#define O_NDELAY FNDELAY
#else /* ! defined (FNDELAY) */
#define O_NDELAY 0
#endif /* ! defined (FNDELAY) */
#endif /* ! defined (O_NDELAY) */
#ifndef O_NONBLOCK
#ifdef FNBLOCK
#define O_NONBLOCK FNBLOCK
#else /* ! defined (FNBLOCK) */
#define O_NONBLOCK 0
#endif /* ! defined (FNBLOCK) */
#endif /* ! defined (O_NONBLOCK) */
#if O_NDELAY == 0 && O_NONBLOCK == 0
#error No way to do nonblocking I/O
#endif
/* Get definitions for EAGAIN, EWOULDBLOCK and ENODATA. */
#ifndef EAGAIN
#ifndef EWOULDBLOCK
#define EAGAIN (-1)
#define EWOULDBLOCK (-1)
#else /* defined (EWOULDBLOCK) */
#define EAGAIN EWOULDBLOCK
#endif /* defined (EWOULDBLOCK) */
#else /* defined (EAGAIN) */
#ifndef EWOULDBLOCK
#define EWOULDBLOCK EAGAIN
#endif /* ! defined (EWOULDBLOCK) */
#endif /* defined (EAGAIN) */
#ifndef ENODATA
#define ENODATA EAGAIN
#endif
/* Make sure we have a definition for MAX_INPUT. */
#ifndef MAX_INPUT
#define MAX_INPUT (256)
#endif
/* If we have the TIOCSINUSE ioctl call, we use it to lock a terminal.
Otherwise, if we have the TIOCEXCL ioctl call, we have to open the
terminal before we know that it is unlocked. */
#ifdef TIOCSINUSE
#define HAVE_TIOCSINUSE 1
#else
#ifdef TIOCEXCL
#define HAVE_TIOCEXCL 1
#endif
#endif
#if HAVE_TLI
extern int t_errno;
extern char *t_errlist[];
extern int t_nerr;
#endif
/* Determine bits to clear for the various terminal control fields for
HAVE_SYSV_TERMIO and HAVE_POSIX_TERMIOS. */
#if HAVE_SYSV_TERMIO
#define ICLEAR_IFLAG (IGNBRK | BRKINT | IGNPAR | PARMRK | INPCK \
| ISTRIP | INLCR | IGNCR | ICRNL | IUCLC \
| IXON | IXANY | IXOFF)
#define ICLEAR_OFLAG (OPOST | OLCUC | ONLCR | OCRNL | ONOCR | ONLRET \
| OFILL | OFDEL | NLDLY | CRDLY | TABDLY | BSDLY \
| VTDLY | FFDLY)
#define ICLEAR_CFLAG (CBAUD | CLOCAL | CSIZE | PARENB | PARODD)
#define ISET_CFLAG (CS8 | CREAD | HUPCL)
#define ICLEAR_LFLAG (ISIG | ICANON | XCASE | ECHO | ECHOE | ECHOK \
| ECHONL | NOFLSH)
#endif
#if HAVE_POSIX_TERMIOS
#define ICLEAR_IFLAG (BRKINT | ICRNL | IGNBRK | IGNCR | IGNPAR \
| INLCR | INPCK | ISTRIP | IXOFF | IXON \
| PARMRK)
#define ICLEAR_OFLAG (OPOST)
#define ICLEAR_CFLAG (CLOCAL | CSIZE | PARENB | PARODD)
#define ISET_CFLAG (CS8 | CREAD | HUPCL)
#define ICLEAR_LFLAG (ECHO | ECHOE | ECHOK | ECHONL | ICANON | IEXTEN \
| ISIG | NOFLSH | TOSTOP)
#endif
/* Local functions. */
static RETSIGTYPE usalarm P((int isig));
static boolean fsserial_init P((struct sconnection *qconn,
const struct sconncmds *qcmds,
const char *zdevice));
static void usserial_free P((struct sconnection *qconn));
static boolean fsserial_lockfile P((boolean flok,
const struct sconnection *));
static boolean fsserial_lock P((struct sconnection *qconn,
boolean fin));
static boolean fsserial_unlock P((struct sconnection *qconn));
static boolean fsserial_open P((struct sconnection *qconn, long ibaud,
boolean fwait));
static boolean fsstdin_open P((struct sconnection *qconn, long ibaud,
boolean fwait));
static boolean fsmodem_open P((struct sconnection *qconn, long ibaud,
boolean fwait));
static boolean fsdirect_open P((struct sconnection *qconn, long ibaud,
boolean fwait));
static boolean fsblock P((struct ssysdep_conn *q, boolean fblock));
static boolean fsserial_close P((struct ssysdep_conn *q));
static boolean fsstdin_close P((struct sconnection *qconn,
pointer puuconf,
struct uuconf_dialer *qdialer,
boolean fsuccess));
static boolean fsmodem_close P((struct sconnection *qconn,
pointer puuconf,
struct uuconf_dialer *qdialer,
boolean fsuccess));
static boolean fsdirect_close P((struct sconnection *qconn,
pointer puuconf,
struct uuconf_dialer *qdialer,
boolean fsuccess));
static boolean fsserial_reset P((struct sconnection *qconn));
static boolean fsstdin_reset P((struct sconnection *qconn));
static boolean fsstdin_read P((struct sconnection *qconn,
char *zbuf, size_t *pclen, size_t cmin,
int ctimeout, boolean freport));
static boolean fsstdin_write P((struct sconnection *qconn,
const char *zwrite, size_t cwrite));
static boolean fsserial_break P((struct sconnection *qconn));
static boolean fsstdin_break P((struct sconnection *qconn));
static boolean fsserial_set P((struct sconnection *qconn,
enum tparitysetting tparity,
enum tstripsetting tstrip,
enum txonxoffsetting txonxoff));
static boolean fsstdin_set P((struct sconnection *qconn,
enum tparitysetting tparity,
enum tstripsetting tstrip,
enum txonxoffsetting txonxoff));
static boolean fsmodem_carrier P((struct sconnection *qconn,
boolean fcarrier));
static boolean fsrun_chat P((int oread, int owrite, char **pzprog));
static boolean fsstdin_chat P((struct sconnection *qconn,
char **pzprog));
static long isserial_baud P((struct sconnection *qconn));
/* The command table for standard input ports. */
static const struct sconncmds sstdincmds =
{
usserial_free,
NULL, /* pflock */
NULL, /* pfunlock */
fsstdin_open,
fsstdin_close,
fsstdin_reset,
NULL, /* pfdial */
fsstdin_read,
fsstdin_write,
fsysdep_conn_io,
fsstdin_break,
fsstdin_set,
NULL, /* pfcarrier */
fsstdin_chat,
isserial_baud
};
/* The command table for modem ports. */
static const struct sconncmds smodemcmds =
{
usserial_free,
fsserial_lock,
fsserial_unlock,
fsmodem_open,
fsmodem_close,
fsserial_reset,
fmodem_dial,
fsysdep_conn_read,
fsysdep_conn_write,
fsysdep_conn_io,
fsserial_break,
fsserial_set,
fsmodem_carrier,
fsysdep_conn_chat,
isserial_baud
};
/* The command table for direct ports. */
static const struct sconncmds sdirectcmds =
{
usserial_free,
fsserial_lock,
fsserial_unlock,
fsdirect_open,
fsdirect_close,
fsserial_reset,
NULL, /* pfdial */
fsysdep_conn_read,
fsysdep_conn_write,
fsysdep_conn_io,
fsserial_break,
fsserial_set,
NULL, /* pfcarrier */
fsysdep_conn_chat,
isserial_baud
};
/* If the system will let us set both O_NDELAY and O_NONBLOCK, we do
so. This is because some ancient drivers on some systems appear to
look for one but not the other. Some other systems will give an
EINVAL error if we attempt to set both, so we use a static global
to hold the value we want to set. If we get EINVAL, we change the
global and try again (if some system gives an error other than
EINVAL, the code will have to be modified). */
static int iSunblock = O_NDELAY | O_NONBLOCK;
/* This code handles SIGALRM. See the discussion above
fsysdep_conn_read. Normally we ignore SIGALRM, but the handler
will temporarily be set to this function, which should set fSalarm
and then either longjmp or schedule another SIGALRM. fSalarm is
never referred to outside of this file, but we don't make it static
to try to fool compilers which don't understand volatile. */
volatile sig_atomic_t fSalarm;
static RETSIGTYPE
usalarm (isig)
int isig;
{
#if ! HAVE_SIGACTION && ! HAVE_SIGVEC && ! HAVE_SIGSET
(void) signal (isig, usalarm);
#endif
fSalarm = TRUE;
#if HAVE_RESTARTABLE_SYSCALLS
longjmp (sSjmp_buf, 1);
#else
alarm (1);
#endif
}
/* We need a simple routine to block SIGINT, SIGQUIT, SIGTERM and
SIGPIPE and another to restore the original state. When these
functions are called (in fsysdep_modem_close) SIGHUP is being
ignored. The routines are isblocksigs, which returns a value of
type HELD_SIG_MASK and usunblocksigs which takes a single argument
of type HELD_SIG_MASK. */
#if HAVE_SIGPROCMASK
/* Use the POSIX sigprocmask call. */
#define HELD_SIG_MASK sigset_t
static sigset_t isblocksigs P((void));
static sigset_t
isblocksigs ()
{
sigset_t sblock, sold;
/* These expressions need an extra set of parentheses to avoid a bug
in SCO 3.2.2. */
(void) (sigemptyset (&sblock));
(void) (sigaddset (&sblock, SIGINT));
(void) (sigaddset (&sblock, SIGQUIT));
(void) (sigaddset (&sblock, SIGTERM));
(void) (sigaddset (&sblock, SIGPIPE));
(void) sigprocmask (SIG_BLOCK, &sblock, &sold);
return sold;
}
#define usunblocksigs(s) \
((void) sigprocmask (SIG_SETMASK, &(s), (sigset_t *) NULL))
#else /* ! HAVE_SIGPROCMASK */
#if HAVE_SIGBLOCK
/* Use the BSD sigblock and sigsetmask calls. */
#define HELD_SIG_MASK int
#ifndef sigmask
#define sigmask(i) (1 << ((i) - 1))
#endif
#define isblocksigs() \
sigblock (sigmask (SIGINT) | sigmask (SIGQUIT) \
| sigmask (SIGTERM) | sigmask (SIGPIPE))
#define usunblocksigs(i) ((void) sigsetmask (i))
#else /* ! HAVE_SIGBLOCK */
#if HAVE_SIGHOLD
/* Use the SVR3 sighold and sigrelse calls. */
#define HELD_SIG_MASK int
static int isblocksigs P((void));
static int
isblocksigs ()
{
sighold (SIGINT);
sighold (SIGQUIT);
sighold (SIGTERM);
sighold (SIGPIPE);
return 0;
}
static void usunblocksigs P((int));
/*ARGSUSED*/
static void
usunblocksigs (i)
int i;
{
sigrelse (SIGINT);
sigrelse (SIGQUIT);
sigrelse (SIGTERM);
sigrelse (SIGPIPE);
}
#else /* ! HAVE_SIGHOLD */
/* We have no way to block signals. This system will suffer from a
race condition in fsysdep_modem_close. */
#define HELD_SIG_MASK int
#define isblocksigs() 0
#define usunblocksigs(i)
#endif /* ! HAVE_SIGHOLD */
#endif /* ! HAVE_SIGBLOCK */
#endif /* ! HAVE_SIGPROCMASK */
/* Initialize a connection for use on a serial port. */
static boolean
fsserial_init (qconn, qcmds, zdevice)
struct sconnection *qconn;
const struct sconncmds *qcmds;
const char *zdevice;
{
struct ssysdep_conn *q;
q = (struct ssysdep_conn *) xmalloc (sizeof (struct ssysdep_conn));
if (zdevice == NULL
&& qconn->qport != NULL
&& qconn->qport->uuconf_ttype != UUCONF_PORTTYPE_STDIN)
zdevice = qconn->qport->uuconf_zname;
if (zdevice == NULL)
q->zdevice = NULL;
else if (*zdevice == '/')
q->zdevice = zbufcpy (zdevice);
else
{
size_t clen;
clen = strlen (zdevice);
q->zdevice = zbufalc (sizeof "/dev/" + clen);
memcpy (q->zdevice, "/dev/", sizeof "/dev/" - 1);
memcpy (q->zdevice + sizeof "/dev/" - 1, zdevice, clen);
q->zdevice[sizeof "/dev/" + clen - 1] = '\0';
}
q->o = -1;
q->ftli = FALSE;
qconn->psysdep = (pointer) q;
qconn->qcmds = qcmds;
return TRUE;
}
/* Initialize a connection for use on standard input. */
boolean
fsysdep_stdin_init (qconn)
struct sconnection *qconn;
{
return fsserial_init (qconn, &sstdincmds, (const char *) NULL);
}
/* Initialize a connection for use on a modem port. */
boolean
fsysdep_modem_init (qconn)
struct sconnection *qconn;
{
return fsserial_init (qconn, &smodemcmds,
qconn->qport->uuconf_u.uuconf_smodem.uuconf_zdevice);
}
/* Initialize a connection for use on a direct port. */
boolean
fsysdep_direct_init (qconn)
struct sconnection *qconn;
{
return fsserial_init (qconn, &sdirectcmds,
qconn->qport->uuconf_u.uuconf_sdirect.uuconf_zdevice);
}
/* Free up a serial port. */
static void
usserial_free (qconn)
struct sconnection *qconn;
{
struct ssysdep_conn *qsysdep;
qsysdep = (struct ssysdep_conn *) qconn->psysdep;
ubuffree (qsysdep->zdevice);
xfree ((pointer) qsysdep);
qconn->psysdep = NULL;
}
/* This routine is used for both locking and unlocking. It is the
only routine which knows how to translate a device name into the
name of a lock file. If it can't figure out a name, it does
nothing and returns TRUE. */
static boolean
fsserial_lockfile (flok, qconn)
boolean flok;
const struct sconnection *qconn;
{
struct ssysdep_conn *qsysdep;
const char *z;
char *zalc;
boolean fret;
qsysdep = (struct ssysdep_conn *) qconn->psysdep;
if (qconn->qport == NULL)
z = NULL;
else
z = qconn->qport->uuconf_zlockname;
zalc = NULL;
if (z == NULL)
{
#if ! HAVE_SVR4_LOCKFILES
{
const char *zbase;
size_t clen;
zbase = strrchr (qsysdep->zdevice, '/') + 1;
clen = strlen (zbase);
zalc = zbufalc (sizeof "LCK.." + clen);
memcpy (zalc, "LCK..", sizeof "LCK.." - 1);
memcpy (zalc + sizeof "LCK.." - 1, zbase, clen + 1);
#if HAVE_SCO_LOCKFILES
{
char *zl;
for (zl = zalc + sizeof "LCK.." - 1; *zl != '\0'; zl++)
if (isupper (*zl))
*zl = tolower (*zl);
}
#endif
z = zalc;
}
#else /* ! HAVE_SVR4_LOCKFILES */
#if HAVE_SVR4_LOCKFILES
{
struct stat s;
if (stat (qsysdep->zdevice, &s) != 0)
{
ulog (LOG_ERROR, "stat (%s): %s", qsysdep->zdevice,
strerror (errno));
return FALSE;
}
zalc = zbufalc (sizeof "LK.123.123.123");
sprintf (zalc, "LK.%03d.%03d.%03d", major (s.st_dev),
major (s.st_rdev), minor (s.st_rdev));
z = zalc;
}
#else /* ! HAVE_SVR4_LOCKFILES */
z = strrchr (qsysdep->zdevice, '/') + 1;
#endif /* ! HAVE_SVR4_LOCKFILES */
#endif /* ! HAVE_SVR4_LOCKFILES */
}
if (flok)
fret = fsdo_lock (z, FALSE, (boolean *) NULL);
else
fret = fsdo_unlock (z, FALSE);
#if HAVE_COHERENT_LOCKFILES
if (fret)
{
if (flok)
{
if (lockttyexist (z+5))
{
ulog (LOG_NORMAL, "%s: port already locked", z+5);
fret = FALSE;
}
else
fret = (fscoherent_disable_tty (z + 5, &qsysdep->zenable));
}
else
{
fret = TRUE;
if (qsysdep->zenable != NULL)
{
const char *azargs[3];
int aidescs[3];
pid_t ipid;
azargs[0] = "/etc/enable";
azargs[1] = qsysdep->zenable;
azargs[2] = NULL;
aidescs[0] = SPAWN_NULL;
aidescs[1] = SPAWN_NULL;
aidescs[2] = SPAWN_NULL;
ipid = ixsspawn (azargs, aidescs, TRUE, FALSE,
(const char *) NULL, TRUE, TRUE,
(const char *) NULL, (const char *) NULL,
(const char *) NULL);
if (ipid < 0)
{
ulog (LOG_ERROR, "ixsspawn (/etc/enable %s): %s",
qsysdep->zenable, strerror (errno));
fret = FALSE;
}
else
{
if (ixswait ((unsigned long) ipid, (const char *) NULL)
== 0)
fret = TRUE;
else
fret = FALSE;
}
ubuffree (qsysdep->zenable);
qsysdep->zenable = NULL;
}
}
}
#endif /* HAVE_COHERENT_LOCKFILES */
ubuffree (zalc);
return fret;
}
/* If we can mark a modem line in use, then when we lock a port we
must open it and mark it in use. We can't wait until the actual
open because we can't fail out if it is locked then. */
static boolean
fsserial_lock (qconn, fin)
struct sconnection *qconn;
boolean fin;
{
if (! fsserial_lockfile (TRUE, qconn))
return FALSE;
#if HAVE_TIOCSINUSE || HAVE_TIOCEXCL
/* Open the line and try to mark it in use. */
{
struct ssysdep_conn *qsysdep;
int iflag;
qsysdep = (struct ssysdep_conn *) qconn->psysdep;
if (fin)
iflag = 0;
else
iflag = iSunblock;
qsysdep->o = open (qsysdep->zdevice, O_RDWR | iflag);
if (qsysdep->o < 0)
{
#if O_NONBLOCK != 0
if (! fin && iSunblock != O_NONBLOCK && errno == EINVAL)
{
iSunblock = O_NONBLOCK;
qsysdep->o = open (qsysdep->zdevice,
O_RDWR | O_NONBLOCK);
}
#endif
if (qsysdep->o < 0)
{
if (errno != EBUSY)
ulog (LOG_ERROR, "open (%s): %s", qsysdep->zdevice,
strerror (errno));
(void) fsserial_lockfile (FALSE, qconn);
return FALSE;
}
}
#if HAVE_TIOCSINUSE
/* If we can't mark it in use, return FALSE to indicate that the
lock failed. */
if (ioctl (qsysdep->o, TIOCSINUSE, 0) < 0)
{
if (errno != EALREADY)
ulog (LOG_ERROR, "ioctl (TIOCSINUSE): %s", strerror (errno));
#ifdef TIOCNOTTY
(void) ioctl (qsysdep->o, TIOCNOTTY, (char *) NULL);
#endif
(void) close (qsysdep->o);
qsysdep->o = -1;
(void) fsserial_lockfile (FALSE, qconn);
return FALSE;
}
#endif
if (fcntl (qsysdep->o, F_SETFD,
fcntl (qsysdep->o, F_GETFD, 0) | FD_CLOEXEC) < 0)
{
ulog (LOG_ERROR, "fcntl (FD_CLOEXEC): %s", strerror (errno));
#ifdef TIOCNOTTY
(void) ioctl (qsysdep->o, TIOCNOTTY, (char *) NULL);
#endif
(void) close (qsysdep->o);
qsysdep->o = -1;
(void) fsserial_lockfile (FALSE, qconn);
return FALSE;
}
#ifdef TIOCSCTTY
/* On BSD 4.4, make it our controlling terminal. */
(void) ioctl (qsysdep->o, TIOCSCTTY, 0);
#endif
}
#endif /* HAVE_TIOCSINUSE || HAVE_TIOCEXCL */
return TRUE;
}
/* Unlock a modem or direct port. */
static boolean
fsserial_unlock (qconn)
struct sconnection *qconn;
{
boolean fret;
struct ssysdep_conn *qsysdep;
fret = TRUE;
/* The file may have been opened by fsserial_lock, so close it here
if necessary. */
qsysdep = (struct ssysdep_conn *) qconn->psysdep;
if (qsysdep->o >= 0)
{
#ifdef TIOCNOTTY
(void) ioctl (qsysdep->o, TIOCNOTTY, (char *) NULL);
#endif
if (close (qsysdep->o) < 0)
{
ulog (LOG_ERROR, "close: %s", strerror (errno));
fret = FALSE;
}
qsysdep->o = -1;
}
if (! fsserial_lockfile (FALSE, qconn))
fret = FALSE;
return fret;
}
/* Open a serial line. This sets the terminal settings. We begin in
seven bit mode and let the protocol change if necessary. */
#if HAVE_POSIX_TERMIOS
typedef speed_t baud_code;
#else
typedef int baud_code;
#endif
static struct sbaud_table
{
baud_code icode;
long ibaud;
} asSbaud_table[] =
{
{ B50, 50 },
{ B75, 75 },
{ B110, 110 },
{ B134, 134 },
{ B150, 150 },
{ B200, 200 },
{ B300, 300 },
{ B600, 600 },
{ B1200, 1200 },
{ B1800, 1800 },
{ B2400, 2400 },
{ B4800, 4800 },
{ B9600, 9600 },
#ifdef B19200
{ B19200, 19200 },
#else /* ! defined (B19200) */
#ifdef EXTA
{ EXTA, 19200 },
#endif /* EXTA */
#endif /* ! defined (B19200) */
#ifdef B38400
{ B38400, 38400 },
#else /* ! defined (B38400) */
#ifdef EXTB
{ EXTB, 38400 },
#endif /* EXTB */
#endif /* ! defined (B38400) */
#ifdef B57600
{ B57600, 57600 },
#endif
#ifdef B76800
{ B76800, 76800 },
#endif
#ifdef B115200
{ B115200, 115200 },
#endif
{ B0, 0 }
};
#define CBAUD_TABLE (sizeof asSbaud_table / sizeof asSbaud_table[0])
#if HAVE_SYSV_TERMIO || HAVE_POSIX_TERMIOS
/* Hold the MIN value for the terminal to avoid setting it
unnecessarily. */
static int cSmin;
#endif /* HAVE_SYSV_TERMIO || HAVE_POSIX_TERMIOS */
static boolean
fsserial_open (qconn, ibaud, fwait)
struct sconnection *qconn;
long ibaud;
boolean fwait;
{
struct ssysdep_conn *q;
baud_code ib;
q = (struct ssysdep_conn *) qconn->psysdep;
if (q->zdevice != NULL)
ulog_device (strrchr (q->zdevice, '/') + 1);
else
{
const char *zport;
boolean fdummy;
#if DEBUG > 0
if (qconn->qport != NULL &&
qconn->qport->uuconf_ttype != UUCONF_PORTTYPE_STDIN)
ulog (LOG_FATAL, "fsserial_open: Can't happen");
#endif
zport = zsysdep_port_name (&fdummy);
if (zport != NULL)
ulog_device (zport);
}
ib = B0;
if (ibaud != 0)
{
int i;
for (i = 0; i < CBAUD_TABLE; i++)
if (asSbaud_table[i].ibaud == ibaud)
break;
if (i >= CBAUD_TABLE)
{
ulog (LOG_ERROR, "Unsupported baud rate %ld", ibaud);
return FALSE;
}
ib = asSbaud_table[i].icode;
}
/* The port may have already been opened by the locking routine. */
if (q->o < 0)
{
int iflag;
if (fwait)
iflag = 0;
else
iflag = iSunblock;
q->o = open (q->zdevice, O_RDWR | iflag);
if (q->o < 0)
{
#if O_NONBLOCK != 0
if (! fwait && iSunblock != O_NONBLOCK && errno == EINVAL)
{
iSunblock = O_NONBLOCK;
q->o = open (q->zdevice, O_RDWR | O_NONBLOCK);
}
#endif
if (q->o < 0)
{
ulog (LOG_ERROR, "open (%s): %s", q->zdevice,
strerror (errno));
return FALSE;
}
}
if (fcntl (q->o, F_SETFD, fcntl (q->o, F_GETFD, 0) | FD_CLOEXEC) < 0)
{
ulog (LOG_ERROR, "fcntl (FD_CLOEXEC): %s", strerror (errno));
return FALSE;
}
#ifdef TIOCSCTTY
/* On BSD 4.4, make it our controlling terminal. */
(void) ioctl (q->o, TIOCSCTTY, 0);
#endif
}
/* Get the port flags, and make sure the ports are blocking. */
q->iflags = fcntl (q->o, F_GETFL, 0);
if (q->iflags < 0)
{
ulog (LOG_ERROR, "fcntl: %s", strerror (errno));
return FALSE;
}
q->istdout_flags = -1;
if (! fgetterminfo (q->o, &q->sorig))
{
q->fterminal = FALSE;
return TRUE;
}
q->fterminal = TRUE;
q->snew = q->sorig;
#if HAVE_BSD_TTY
q->snew.stty.sg_flags = RAW | ANYP;
if (ibaud == 0)
ib = q->snew.stty.sg_ospeed;
else
{
q->snew.stty.sg_ispeed = ib;
q->snew.stty.sg_ospeed = ib;
}
/* We don't want to receive any interrupt characters. */
q->snew.stchars.t_intrc = -1;
q->snew.stchars.t_quitc = -1;
q->snew.stchars.t_eofc = -1;
q->snew.stchars.t_brkc = -1;
q->snew.sltchars.t_suspc = -1;
q->snew.sltchars.t_rprntc = -1;
q->snew.sltchars.t_dsuspc = -1;
q->snew.sltchars.t_flushc = -1;
q->snew.sltchars.t_werasc = -1;
q->snew.sltchars.t_lnextc = -1;
#ifdef NTTYDISC
/* We want to use the ``new'' terminal driver so that we can use the
local mode bits to control XON/XOFF. */
{
int iparam;
if (ioctl (q->o, TIOCGETD, &iparam) >= 0
&& iparam != NTTYDISC)
{
iparam = NTTYDISC;
(void) ioctl (q->o, TIOCSETD, &iparam);
}
}
#endif
#ifdef TIOCHPCL
/* When the file is closed, hang up the line. This is a safety
measure in case the program crashes. */
(void) ioctl (q->o, TIOCHPCL, 0);
#endif
#ifdef TIOCFLUSH
{
int iparam;
/* Flush pending input. */
#ifdef FREAD
iparam = FREAD;
#else
iparam = 0;
#endif
(void) ioctl (q->o, TIOCFLUSH, &iparam);
}
#endif /* TIOCFLUSH */
#endif /* HAVE_BSD_TTY */
#if HAVE_SYSV_TERMIO
if (ibaud == 0)
ib = q->snew.c_cflag & CBAUD;
q->snew.c_iflag &=~ ICLEAR_IFLAG;
q->snew.c_oflag &=~ ICLEAR_OFLAG;
q->snew.c_cflag &=~ ICLEAR_CFLAG;
q->snew.c_cflag |= (ib | ISET_CFLAG);
q->snew.c_lflag &=~ ICLEAR_LFLAG;
cSmin = 1;
q->snew.c_cc[VMIN] = cSmin;
q->snew.c_cc[VTIME] = 0;
#ifdef TCFLSH
/* Flush pending input. */
(void) ioctl (q->o, TCFLSH, 0);
#endif
#endif /* HAVE_SYSV_TERMIO */
#if HAVE_POSIX_TERMIOS
if (ibaud == 0)
ib = cfgetospeed (&q->snew);
q->snew.c_iflag &=~ ICLEAR_IFLAG;
q->snew.c_oflag &=~ ICLEAR_OFLAG;
q->snew.c_cflag &=~ ICLEAR_CFLAG;
q->snew.c_cflag |= ISET_CFLAG;
q->snew.c_lflag &=~ ICLEAR_LFLAG;
cSmin = 1;
q->snew.c_cc[VMIN] = cSmin;
q->snew.c_cc[VTIME] = 0;
(void) cfsetospeed (&q->snew, ib);
(void) cfsetispeed (&q->snew, ib);
/* Flush pending input. */
(void) tcflush (q->o, TCIFLUSH);
#endif /* HAVE_POSIX_TERMIOS */
if (! fsetterminfo (q->o, &q->snew))
{
ulog (LOG_ERROR, "Can't set terminal settings: %s", strerror (errno));
return FALSE;
}
if (ibaud != 0)
q->ibaud = ibaud;
else
{
int i;
q->ibaud = (long) 1200;
for (i = 0; i < CBAUD_TABLE; i++)
{
if (asSbaud_table[i].icode == ib)
{
q->ibaud = asSbaud_table[i].ibaud;
break;
}
}
DEBUG_MESSAGE1 (DEBUG_PORT,
"fsserial_open: Baud rate is %ld", q->ibaud);
}
return TRUE;
}
/* Open a standard input port. The code alternates q->o between 0 and
1 as appropriate. It is always 0 before any call to fsblock. */
static boolean
fsstdin_open (qconn, ibaud, fwait)
struct sconnection *qconn;
long ibaud;
boolean fwait;
{
struct ssysdep_conn *q;
q = (struct ssysdep_conn *) qconn->psysdep;
q->o = 0;
if (! fsserial_open (qconn, ibaud, fwait))
return FALSE;
q->istdout_flags = fcntl (1, F_GETFL, 0);
if (q->istdout_flags < 0)
{
ulog (LOG_ERROR, "fcntl: %s", strerror (errno));
return FALSE;
}
return TRUE;
}
/* Open a modem port. */
static boolean
fsmodem_open (qconn, ibaud, fwait)
struct sconnection *qconn;
long ibaud;
boolean fwait;
{
if (ibaud == (long) 0)
ibaud = qconn->qport->uuconf_u.uuconf_smodem.uuconf_ibaud;
return fsserial_open (qconn, ibaud, fwait);
}
/* Open a direct port. */
static boolean
fsdirect_open (qconn, ibaud, fwait)
struct sconnection *qconn;
long ibaud;
boolean fwait;
{
if (ibaud == (long) 0)
ibaud = qconn->qport->uuconf_u.uuconf_sdirect.uuconf_ibaud;
return fsserial_open (qconn, ibaud, fwait);
}
/* Change the blocking status of the port. We keep track of the
current blocking status to avoid calling fcntl unnecessarily; fcntl
turns out to be surprisingly expensive, at least on Ultrix. */
static boolean
fsblock (qs, fblock)
struct ssysdep_conn *qs;
boolean fblock;
{
int iwant;
int isys;
if (fblock)
iwant = qs->iflags &~ (O_NDELAY | O_NONBLOCK);
else
iwant = qs->iflags | iSunblock;
if (iwant == qs->iflags)
return TRUE;
isys = fcntl (qs->o, F_SETFL, iwant);
if (isys < 0)
{
#if O_NONBLOCK != 0
if (! fblock && iSunblock != O_NONBLOCK && errno == EINVAL)
{
iSunblock = O_NONBLOCK;
iwant = qs->iflags | O_NONBLOCK;
isys = fcntl (qs->o, F_SETFL, iwant);
}
#endif
if (isys < 0)
{
ulog (LOG_ERROR, "fcntl: %s", strerror (errno));
return FALSE;
}
}
qs->iflags = iwant;
if (qs->istdout_flags >= 0)
{
if (fblock)
iwant = qs->istdout_flags &~ (O_NDELAY | O_NONBLOCK);
else
iwant = qs->istdout_flags | iSunblock;
if (fcntl (1, F_SETFL, iwant) < 0)
{
/* We don't bother to fix up iSunblock here, since we
succeeded above. */
ulog (LOG_ERROR, "fcntl: %s", strerror (errno));
return FALSE;
}
qs->istdout_flags = iwant;
}
return TRUE;
}
/* Close a serial port. */
static boolean
fsserial_close (q)
struct ssysdep_conn *q;
{
if (q->o >= 0)
{
/* Use a 30 second timeout to avoid hanging while draining
output. */
if (q->fterminal)
{
fSalarm = FALSE;
if (fsysdep_catch ())
{
usysdep_start_catch ();
usset_signal (SIGALRM, usalarm, TRUE, (boolean *) NULL);
(void) alarm (30);
(void) fsetterminfodrain (q->o, &q->sorig);
}
usset_signal (SIGALRM, SIG_IGN, TRUE, (boolean *) NULL);
(void) alarm (0);
usysdep_end_catch ();
/* If we timed out, use the non draining call. Hopefully
this can't hang. */
if (fSalarm)
(void) fsetterminfo (q->o, &q->sorig);
}
#ifdef TIOCNOTTY
/* We don't want this as our controlling terminal any more, so
get rid of it. This is necessary because we don't want to
open /dev/tty, since that can confuse the serial port locking
on some computers. */
(void) ioctl (q->o, TIOCNOTTY, (char *) NULL);
#endif
(void) close (q->o);
q->o = -1;
/* Sleep to give the terminal a chance to settle, in case we are
about to call out again. */
sleep (2);
}
return TRUE;
}
/* Close a stdin port. */
/*ARGSUSED*/
static boolean
fsstdin_close (qconn, puuconf, qdialer, fsuccess)
struct sconnection *qconn;
pointer puuconf;
struct uuconf_dialer *qdialer;
boolean fsuccess;
{
struct ssysdep_conn *qsysdep;
qsysdep = (struct ssysdep_conn *) qconn->psysdep;
(void) close (1);
(void) close (2);
qsysdep->o = 0;
return fsserial_close (qsysdep);
}
/* Close a modem port. */
static boolean
fsmodem_close (qconn, puuconf, qdialer, fsuccess)
struct sconnection *qconn;
pointer puuconf;
struct uuconf_dialer *qdialer;
boolean fsuccess;
{
struct ssysdep_conn *qsysdep;
boolean fret;
struct uuconf_dialer sdialer;
const struct uuconf_chat *qchat;
qsysdep = (struct ssysdep_conn *) qconn->psysdep;
fret = TRUE;
/* Figure out the dialer so that we can run the complete or abort
chat scripts. */
if (qdialer == NULL)
{
if (qconn->qport->uuconf_u.uuconf_smodem.uuconf_pzdialer != NULL)
{
const char *zdialer;
int iuuconf;
zdialer = qconn->qport->uuconf_u.uuconf_smodem.uuconf_pzdialer[0];
iuuconf = uuconf_dialer_info (puuconf, zdialer, &sdialer);
if (iuuconf == UUCONF_SUCCESS)
qdialer = &sdialer;
else
{
ulog_uuconf (LOG_ERROR, puuconf, iuuconf);
fret = FALSE;
}
}
else
qdialer = qconn->qport->uuconf_u.uuconf_smodem.uuconf_qdialer;
}
/* Get the complete or abort chat script to use. */
qchat = NULL;
if (qdialer != NULL)
{
if (fsuccess)
qchat = &qdialer->uuconf_scomplete;
else
qchat = &qdialer->uuconf_sabort;
}
if (qchat != NULL
&& (qchat->uuconf_pzprogram != NULL
|| qchat->uuconf_pzchat != NULL))
{
boolean fsighup_ignored;
HELD_SIG_MASK smask;
int i;
sig_atomic_t afhold[INDEXSIG_COUNT];
/* We're no longer interested in carrier. */
(void) fsmodem_carrier (qconn, FALSE);
/* The port I/O routines check whether any signal has been
received, and abort if one has. While we are closing down
the modem, we don't care if we received a signal in the past,
but we do care if we receive a new signal (otherwise it would
be difficult to kill a uucico which was closing down a
modem). We never care if we get SIGHUP at this point. So we
turn off SIGHUP, remember what signals we've already seen,
and clear our notion of what signals we've seen. We have to
block the signals while we remember and clear the array,
since we might otherwise miss a signal which occurred between
the copy and the clear (old systems can't block signals; they
will just have to suffer the race). */
usset_signal (SIGHUP, SIG_IGN, FALSE, &fsighup_ignored);
smask = isblocksigs ();
for (i = 0; i < INDEXSIG_COUNT; i++)
{
afhold[i] = afSignal[i];
afSignal[i] = FALSE;
}
usunblocksigs (smask);
if (! fchat (qconn, puuconf, qchat, (const struct uuconf_system *) NULL,
(const struct uuconf_dialer *) NULL, (const char *) NULL,
FALSE, qconn->qport->uuconf_zname,
qsysdep->ibaud))
fret = FALSE;
/* Restore the old signal array and the SIGHUP handler. It is
not necessary to block signals here, since all we are doing
is exactly what the signal handler itself would do if the
signal occurred. */
for (i = 0; i < INDEXSIG_COUNT; i++)
if (afhold[i])
afSignal[i] = TRUE;
if (! fsighup_ignored)
usset_signal (SIGHUP, ussignal, TRUE, (boolean *) NULL);
}
if (qdialer != NULL
&& qdialer == &sdialer)
(void) uuconf_dialer_free (puuconf, &sdialer);
#if ! HAVE_RESET_BUG
/* Reset the terminal to make sure we drop DTR. It should be
dropped when we close the descriptor, but that doesn't seem to
happen on some systems. Use a 30 second timeout to avoid hanging
while draining output. */
if (qsysdep->fterminal)
{
#if HAVE_BSD_TTY
qsysdep->snew.stty.sg_ispeed = B0;
qsysdep->snew.stty.sg_ospeed = B0;
#endif
#if HAVE_SYSV_TERMIO
qsysdep->snew.c_cflag = (qsysdep->snew.c_cflag &~ CBAUD) | B0;
#endif
#if HAVE_POSIX_TERMIOS
(void) cfsetospeed (&qsysdep->snew, B0);
#endif
fSalarm = FALSE;
if (fsysdep_catch ())
{
usysdep_start_catch ();
usset_signal (SIGALRM, usalarm, TRUE, (boolean *) NULL);
(void) alarm (30);
(void) fsetterminfodrain (qsysdep->o, &qsysdep->snew);
}
usset_signal (SIGALRM, SIG_IGN, TRUE, (boolean *) NULL);
(void) alarm (0);
usysdep_end_catch ();
/* Let the port settle. */
sleep (2);
}
#endif /* ! HAVE_RESET_BUG */
if (! fsserial_close (qsysdep))
fret = FALSE;
return fret;
}
/* Close a direct port. */
/*ARGSUSED*/
static boolean
fsdirect_close (qconn, puuconf, qdialer, fsuccess)
struct sconnection *qconn;
pointer puuconf;
struct uuconf_dialer *qdialer;
boolean fsuccess;
{
return fsserial_close ((struct ssysdep_conn *) qconn->psysdep);
}
/* Reset a serial port by hanging up. */
static boolean
fsserial_reset (qconn)
struct sconnection *qconn;
{
struct ssysdep_conn *q;
sterminal sbaud;
q = (struct ssysdep_conn *) qconn->psysdep;
if (! q->fterminal)
return TRUE;
sbaud = q->snew;
#if HAVE_BSD_TTY
sbaud.stty.sg_ispeed = B0;
sbaud.stty.sg_ospeed = B0;
#endif
#if HAVE_SYSV_TERMIO
sbaud.c_cflag = (sbaud.c_cflag &~ CBAUD) | B0;
#endif
#if HAVE_POSIX_TERMIOS
if (cfsetospeed (&sbaud, B0) < 0)
{
ulog (LOG_ERROR, "Can't set baud rate: %s", strerror (errno));
return FALSE;
}
#endif
if (! fsetterminfodrain (q->o, &sbaud))
{
ulog (LOG_ERROR, "Can't hangup terminal: %s", strerror (errno));
return FALSE;
}
/* Give the terminal a chance to settle. */
sleep (2);
if (! fsetterminfo (q->o, &q->snew))
{
ulog (LOG_ERROR, "Can't reopen terminal: %s", strerror (errno));
return FALSE;
}
return TRUE;
}
/* Reset a standard input port. */
static boolean
fsstdin_reset (qconn)
struct sconnection *qconn;
{
struct ssysdep_conn *qsysdep;
qsysdep = (struct ssysdep_conn *) qconn->psysdep;
qsysdep->o = 0;
return fsserial_reset (qconn);
}
/* Begin dialing out on a modem port. This opens the dialer device if
there is one. */
boolean
fsysdep_modem_begin_dial (qconn, qdial)
struct sconnection *qconn;
struct uuconf_dialer *qdial;
{
struct ssysdep_conn *qsysdep;
const char *z;
qsysdep = (struct ssysdep_conn *) qconn->psysdep;
#ifdef TIOCMODEM
/* If we can tell the modem to obey modem control, do so. */
{
int iperm;
iperm = 0;
(void) ioctl (qsysdep->o, TIOCMODEM, &iperm);
}
#endif /* TIOCMODEM */
/* If we supposed to toggle DTR, do so. */
if (qdial->uuconf_fdtr_toggle)
{
#ifdef TIOCCDTR
(void) ioctl (qsysdep->o, TIOCCDTR, 0);
sleep (2);
(void) ioctl (qsysdep->o, TIOCSDTR, 0);
#else /* ! defined (TIOCCDTR) */
(void) fconn_reset (qconn);
#endif /* ! defined (TIOCCDTR) */
if (qdial->uuconf_fdtr_toggle_wait)
sleep (2);
}
if (! fsmodem_carrier (qconn, FALSE))
return FALSE;
/* Open the dial device if there is one. */
z = qconn->qport->uuconf_u.uuconf_smodem.uuconf_zdial_device;
if (z != NULL)
{
char *zfree;
int o;
qsysdep->ohold = qsysdep->o;
zfree = NULL;
if (*z != '/')
{
zfree = zbufalc (sizeof "/dev/" + strlen (z));
sprintf (zfree, "/dev/%s", z);
z = zfree;
}
o = open ((char *) z, O_RDWR | O_NOCTTY);
if (o < 0)
{
ulog (LOG_ERROR, "open (%s): %s", z, strerror (errno));
ubuffree (zfree);
return FALSE;
}
ubuffree (zfree);
if (fcntl (o, F_SETFD, fcntl (o, F_GETFD, 0) | FD_CLOEXEC) < 0)
{
ulog (LOG_ERROR, "fcntl (FD_CLOEXEC): %s", strerror (errno));
(void) close (o);
return FALSE;
}
qsysdep->o = o;
}
return TRUE;
}
/* Tell the port to require or not require carrier. On BSD this uses
TIOCCAR and TIOCNCAR, which I assume are generally supported (it
can also use the LNOMDM bit supported by IS68K Unix). On System V
it resets or sets CLOCAL. We only require carrier if the port
supports it. This will only be called with fcarrier TRUE if the
dialer supports carrier. */
static boolean
fsmodem_carrier (qconn, fcarrier)
struct sconnection *qconn;
boolean fcarrier;
{
register struct ssysdep_conn *q;
q = (struct ssysdep_conn *) qconn->psysdep;
if (! q->fterminal)
return TRUE;
if (fcarrier)
{
if (qconn->qport->uuconf_u.uuconf_smodem.uuconf_fcarrier)
{
#ifdef TIOCCAR
/* Tell the modem to pay attention to carrier. */
if (ioctl (q->o, TIOCCAR, 0) < 0)
{
ulog (LOG_ERROR, "ioctl (TIOCCAR): %s", strerror (errno));
return FALSE;
}
#endif /* TIOCCAR */
#if HAVE_BSD_TTY
#ifdef LNOMDM
/* IS68K Unix uses a local LNOMDM bit. */
{
int iparam;
iparam = LNOMDM;
if (ioctl (q->o, TIOCLBIC, &iparam) < 0)
{
ulog (LOG_ERROR, "ioctl (TIOCLBIC, LNOMDM): %s",
strerror (errno));
return FALSE;
}
}
#endif /* LNOMDM */
#endif /* HAVE_BSD_TTY */
#if HAVE_SYSV_TERMIO || HAVE_POSIX_TERMIOS
/* Put the modem into nonlocal mode. */
q->snew.c_cflag &=~ CLOCAL;
if (! fsetterminfo (q->o, &q->snew))
{
ulog (LOG_ERROR, "Can't clear CLOCAL: %s", strerror (errno));
return FALSE;
}
#endif /* HAVE_SYSV_TERMIO || HAVE_POSIX_TERMIOS */
}
}
else
{
#ifdef TIOCNCAR
/* Tell the modem to ignore carrier. */
if (ioctl (q->o, TIOCNCAR, 0) < 0)
{
ulog (LOG_ERROR, "ioctl (TIOCNCAR): %s", strerror (errno));
return FALSE;
}
#endif /* TIOCNCAR */
#if HAVE_BSD_TTY
#ifdef LNOMDM
/* IS68K Unix uses a local LNOMDM bit. */
{
int iparam;
iparam = LNOMDM;
if (ioctl (q->o, TIOCLBIS, &iparam) < 0)
{
ulog (LOG_ERROR, "ioctl (TIOCLBIS, LNOMDM): %s",
strerror (errno));
return FALSE;
}
}
#endif /* LNOMDM */
#endif /* HAVE_BSD_TTY */
#if HAVE_SYSV_TERMIO || HAVE_POSIX_TERMIOS
/* Put the modem into local mode (ignore carrier) to start the chat
script. */
q->snew.c_cflag |= CLOCAL;
if (! fsetterminfo (q->o, &q->snew))
{
ulog (LOG_ERROR, "Can't set CLOCAL: %s", strerror (errno));
return FALSE;
}
#if HAVE_CLOCAL_BUG
/* On SCO and AT&T UNIX PC you have to reopen the port. */
{
int onew;
onew = open (q->zdevice, O_RDWR);
if (onew < 0)
{
ulog (LOG_ERROR, "open (%s): %s", q->zdevice, strerror (errno));
return FALSE;
}
if (fcntl (onew, F_SETFD,
fcntl (onew, F_GETFD, 0) | FD_CLOEXEC) < 0)
{
ulog (LOG_ERROR, "fcntl (FD_CLOEXEC): %s", strerror (errno));
(void) close (onew);
return FALSE;
}
(void) close (q->o);
q->o = onew;
}
#endif /* HAVE_CLOCAL_BUG */
#endif /* HAVE_SYSV_TERMIO || HAVE_POSIX_TERMIOS */
}
return TRUE;
}
/* Finish dialing out on a modem by closing any dialer device and waiting
for carrier. */
boolean
fsysdep_modem_end_dial (qconn, qdial)
struct sconnection *qconn;
struct uuconf_dialer *qdial;
{
struct ssysdep_conn *q;
q = (struct ssysdep_conn *) qconn->psysdep;
if (qconn->qport->uuconf_u.uuconf_smodem.uuconf_zdial_device != NULL)
{
(void) close (q->o);
q->o = q->ohold;
}
if (qconn->qport->uuconf_u.uuconf_smodem.uuconf_fcarrier
&& qdial->uuconf_fcarrier)
{
/* Tell the port that we need carrier. */
if (! fsmodem_carrier (qconn, TRUE))
return FALSE;
#ifdef TIOCWONLINE
/* We know how to wait for carrier, so do so. */
/* If we already got a signal, just quit now. */
if (FGOT_QUIT_SIGNAL ())
return FALSE;
/* This bit of code handles signals just like fsysdep_conn_read
does. See that function for a longer explanation. */
/* Use fsysdep_catch to handle a longjmp from the signal
handler. */
fSalarm = FALSE;
if (fsysdep_catch ())
{
/* Start catching SIGALRM; normally we ignore it. */
usysdep_start_catch ();
usset_signal (SIGALRM, usalarm, TRUE, (boolean *) NULL);
(void) alarm (qdial->uuconf_ccarrier_wait);
/* We really don't care if we get an error, since that will
probably just mean that TIOCWONLINE isn't supported in
which case there's nothing we can do anyhow. If we get
SIGINT we want to keep waiting for carrier, because
SIGINT just means don't start any new sessions. We don't
handle SIGINT correctly if we do a longjmp in the signal
handler; too bad. */
while (ioctl (q->o, TIOCWONLINE, 0) < 0
&& errno == EINTR)
{
/* Log the signal. */
ulog (LOG_ERROR, (const char *) NULL);
if (FGOT_QUIT_SIGNAL () || fSalarm)
break;
}
}
/* Turn off the pending SIGALRM and ignore SIGALARM again. */
usset_signal (SIGALRM, SIG_IGN, TRUE, (boolean *) NULL);
(void) alarm (0);
usysdep_end_catch ();
/* If we got a random signal, just return FALSE. */
if (FGOT_QUIT_SIGNAL ())
return FALSE;
/* If we timed out, give an error. */
if (fSalarm)
{
ulog (LOG_ERROR, "Timed out waiting for carrier");
return FALSE;
}
#endif /* TIOCWONLINE */
}
return TRUE;
}
/* Read data from a connection, with a timeout. This routine handles
all types of connections, including TLI.
This function should return when we have read cmin characters or
the timeout has occurred. We have to work a bit to get Unix to do
this efficiently on a terminal. The simple implementation
schedules a SIGALRM signal and then calls read; if there is a
single character available, the call to read will return
immediately, so there must be a loop which terminates when the
SIGALRM is delivered or the correct number of characters has been
read. This can be very inefficient with a fast CPU or a low baud
rate (or both!), since each call to read may return only one or two
characters.
Under POSIX or System V, we can specify a minimum number of
characters to read, so there is no serious trouble.
Under BSD, we figure out how many characters we have left to read,
how long it will take for them to arrive at the current baud rate,
and sleep that long.
Doing this with a timeout and avoiding all possible race conditions
get very hairy, though. Basically, we're going to schedule a
SIGALRM for when the timeout expires. I don't really want to do a
longjmp in the SIGALRM handler, though, because that may lose data.
Therefore, I have the signal handler set a variable. However, this
means that there will be a span of time between the time the code
checks the variable and the time it calls the read system call; if
the SIGALRM occurs during that time, the read might hang forever.
To avoid this, the SIGALRM handler not only sets a global variable,
it also schedules another SIGALRM for one second in the future
(POSIX specifies that a signal handler is permitted to safely call
alarm). To avoid getting a continual sequence of SIGALRM
interrupts, we change the signal handler to ignore SIGALRM when
we're about to exit the function. This means that every time we
execute fsysdep_conn_read we make at least five system calls. It's
the best I've been able to come up with, though.
When fsysdep_conn_read finishes, there will be no SIGALRM scheduled
and SIGALRM will be ignored. */
boolean
fsysdep_conn_read (qconn, zbuf, pclen, cmin, ctimeout, freport)
struct sconnection *qconn;
char *zbuf;
size_t *pclen;
size_t cmin;
int ctimeout;
boolean freport;
{
CATCH_PROTECT size_t cwant;
boolean fret;
register struct ssysdep_conn * const q
= (struct ssysdep_conn *) qconn->psysdep;
cwant = *pclen;
*pclen = 0;
/* Guard against a bad timeout. We return TRUE when a timeout
expires. It is possible to get a negative timeout here because
the calling code does not check user supplied timeouts for
plausibility. */
if (ctimeout <= 0)
return TRUE;
/* We want to do a blocking read. */
if (! fsblock (q, TRUE))
return FALSE;
fSalarm = FALSE;
/* We're going to set up an alarm signal to last for the entire
read. If the read system call cannot be interrupted, the signal
handler will do a longjmp causing fsysdep_catch (a macro) to
return FALSE. We handle that here. If read can be interrupted,
fsysdep_catch will be defined to TRUE. */
if (fsysdep_catch ())
{
/* Prepare to catch SIGALRM and schedule the signal. */
usysdep_start_catch ();
usset_signal (SIGALRM, usalarm, TRUE, (boolean *) NULL);
alarm (ctimeout);
}
else
{
/* We caught a signal. We don't actually have to do anything,
as all the appropriate checks are made at the start of the
following loop. */
}
fret = FALSE;
while (TRUE)
{
int cgot;
#if HAVE_SYSV_TERMIO || HAVE_POSIX_TERMIOS
/* If we can tell the terminal not to return until we have a
certain number of characters, do so. */
if (q->fterminal)
{
int csetmin;
/* I'm not that confident about setting MIN to values larger
than 127, although up to 255 would probably work. */
if (cmin < 127)
csetmin = cmin;
else
csetmin = 127;
if (csetmin != cSmin)
{
q->snew.c_cc[VMIN] = csetmin;
while (! fsetterminfo (q->o, &q->snew))
{
if (errno != EINTR
|| FGOT_QUIT_SIGNAL ())
{
int ierr;
/* We turn off the signal before reporting the
error to minimize any problems with
interrupted system calls. */
ierr = errno;
usset_signal (SIGALRM, SIG_IGN, TRUE, (boolean *) NULL);
alarm (0);
usysdep_end_catch ();
ulog (LOG_ERROR, "Can't set MIN for terminal: %s",
strerror (ierr));
return FALSE;
}
if (fSalarm)
{
ulog (LOG_ERROR,
"Timed out when setting MIN to %d; retrying",
csetmin);
fSalarm = FALSE;
alarm (ctimeout);
}
}
cSmin = csetmin;
}
}
#endif /* HAVE_SYSV_TERMIO || HAVE_POSIX_TERMIOS */
/* If we've received a signal, get out now. */
if (FGOT_QUIT_SIGNAL ())
break;
/* If we've already gotten a SIGALRM, get out with whatever
we've accumulated. */
if (fSalarm)
{
fret = TRUE;
break;
}
/* Right here is the race condition which we avoid by having the
SIGALRM handler schedule another SIGALRM. */
#if HAVE_TLI
if (q->ftli)
{
int iflags;
cgot = t_rcv (q->o, zbuf, cwant, &iflags);
if (cgot < 0 && t_errno != TSYSERR)
{
usset_signal (SIGALRM, SIG_IGN, TRUE, (boolean *) NULL);
alarm (0);
usysdep_end_catch ();
if (freport)
ulog (LOG_ERROR, "t_rcv: %s",
(t_errno >= 0 && t_errno < t_nerr
? t_errlist[t_errno]
: "unknown TLI error"));
return FALSE;
}
}
else
#endif
cgot = read (q->o, zbuf, cwant);
/* If the read returned an error, check for signals. */
if (cgot < 0)
{
if (errno == EINTR)
{
/* Log the signal. */
ulog (LOG_ERROR, (const char *) NULL);
}
if (fSalarm)
{
fret = TRUE;
break;
}
if (FGOT_QUIT_SIGNAL ())
break;
}
/* If read returned an error, get out. We just ignore EINTR
here, since it must be from some signal we don't care about.
If the read returned 0 then the line must have been hung up
(normally we would have received SIGHUP, but we can't count
on that). We turn off the signals before calling ulog to
reduce problems with interrupted system calls. */
if (cgot <= 0)
{
if (cgot < 0 && errno == EINTR)
cgot = 0;
else
{
int ierr;
ierr = errno;
usset_signal (SIGALRM, SIG_IGN, TRUE, (boolean *) NULL);
alarm (0);
usysdep_end_catch ();
if (freport)
{
if (cgot == 0)
ulog (LOG_ERROR, "Line disconnected");
else
ulog (LOG_ERROR, "read: %s", strerror (ierr));
}
return FALSE;
}
}
cwant -= cgot;
if (cgot >= cmin)
cmin = 0;
else
cmin -= cgot;
zbuf += cgot;
*pclen += cgot;
/* If we have enough data, get out now. */
if (cmin == 0)
{
fret = TRUE;
break;
}
#if HAVE_BSD_TTY
/* We still want more data, so sleep long enough for the rest of
it to arrive. We don't this for System V or POSIX because
setting MIN is good enough (we can't sleep longer than it
takes to get MAX_INPUT characters anyhow).
The baud rate is approximately 10 times the number of
characters which will arrive in one second, so the number of
milliseconds to sleep ==
characters * (milliseconds / character) ==
characters * (1000 * (seconds / character)) ==
characters * (1000 * (1 / (baud / 10))) ==
characters * (10000 / baud)
We arbitrarily reduce the sleep amount by 10 milliseconds to
attempt to account for the amount of time it takes to set up
the sleep. This is how long it takes to get half a character
at 19200 baud. We then don't bother to sleep for less than
10 milliseconds. We don't sleep if the read was interrupted.
We use select to sleep. It would be easy to use poll as
well, but it's unlikely that any system with BSD ttys would
have poll but not select. Using select avoids hassles with
the pending SIGALRM; if it hits the select will be
interrupted, and otherwise the select will not affect it. */
#if ! HAVE_SELECT
#error This code requires select; feel free to extend it
#endif
if (q->fterminal && cmin > 1 && cgot > 0)
{
int csleepchars;
int isleep;
/* We don't try to read all the way up to MAX_INPUT,
since that might drop a character. */
if (cmin <= MAX_INPUT - 10)
csleepchars = cmin;
else
csleepchars = MAX_INPUT - 10;
isleep = (int) (((long) csleepchars * 10000L) / q->ibaud);
isleep -= 10;
if (isleep > 10)
{
struct timeval s;
s.tv_sec = isleep / 1000;
s.tv_usec = (isleep % 1000) * 1000;
/* Some versions of select take a pointer to an int,
while some take a pointer to an fd_set. I just cast
the arguments to a generic pointer, and assume that
any machine which distinguishes int * from fd_set *
(I would be amazed if there are any such machines)
have an appropriate prototype somewhere or other. */
(void) select (0, (pointer) NULL, (pointer) NULL,
(pointer) NULL, &s);
/* Here either the select finished sleeping or we got a
SIGALRM. If the latter occurred, fSalarm was set to
TRUE; it will be checked at the top of the loop. */
}
}
#endif /* HAVE_BSD_TTY */
}
/* Turn off the pending SIGALRM and return. */
usset_signal (SIGALRM, SIG_IGN, TRUE, (boolean *) NULL);
alarm (0);
usysdep_end_catch ();
return fret;
}
/* Read from a stdin port. */
static boolean
fsstdin_read (qconn, zbuf, pclen, cmin, ctimeout, freport)
struct sconnection *qconn;
char *zbuf;
size_t *pclen;
size_t cmin;
int ctimeout;
boolean freport;
{
struct ssysdep_conn *qsysdep;
qsysdep = (struct ssysdep_conn *) qconn->psysdep;
qsysdep->o = 0;
return fsysdep_conn_read (qconn, zbuf, pclen, cmin, ctimeout, freport);
}
/* Write data to a connection. This routine handles all types of
connections, including TLI. */
boolean
fsysdep_conn_write (qconn, zwrite, cwrite)
struct sconnection *qconn;
const char *zwrite;
size_t cwrite;
{
struct ssysdep_conn *q;
int czero;
q = (struct ssysdep_conn *) qconn->psysdep;
/* We want blocking writes here. */
if (! fsblock (q, TRUE))
return FALSE;
czero = 0;
while (cwrite > 0)
{
int cdid;
/* Loop until we don't get an interrupt. */
while (TRUE)
{
/* If we've received a signal, don't continue. */
if (FGOT_QUIT_SIGNAL ())
return FALSE;
#if HAVE_TLI
if (q->ftli)
{
cdid = t_snd (q->o, zwrite, cwrite, 0);
if (cdid < 0 && t_errno != TSYSERR)
{
ulog (LOG_ERROR, "t_snd: %s",
(t_errno >= 0 && t_errno < t_nerr
? t_errlist[t_errno]
: "unknown TLI error"));
return FALSE;
}
}
else
#endif
cdid = write (q->o, zwrite, cwrite);
if (cdid >= 0)
break;
if (errno != EINTR)
break;
/* We were interrupted by a signal. Log it. */
ulog (LOG_ERROR, (const char *) NULL);
}
if (cdid < 0)
{
if (errno != EAGAIN && errno != EWOULDBLOCK && errno != ENODATA)
{
ulog (LOG_ERROR, "write: %s", strerror (errno));
return FALSE;
}
cdid = 0;
}
if (cdid == 0)
{
/* On some systems write will return 0 if carrier is lost.
If we fail to write anything ten times in a row, we
assume that this has happened. This is hacked in like
this because there seems to be no reliable way to tell
exactly why the write returned 0. */
++czero;
if (czero >= 10)
{
ulog (LOG_ERROR, "Line disconnected");
return FALSE;
}
}
else
{
czero = 0;
cwrite -= cdid;
zwrite += cdid;
}
}
return TRUE;
}
/* Write to a stdin port. */
static boolean
fsstdin_write (qconn, zwrite, cwrite)
struct sconnection *qconn;
const char *zwrite;
size_t cwrite;
{
struct ssysdep_conn *qsysdep;
qsysdep = (struct ssysdep_conn *) qconn->psysdep;
qsysdep->o = 0;
if (! fsblock (qsysdep, TRUE))
return FALSE;
qsysdep->o = 1;
return fsysdep_conn_write (qconn, zwrite, cwrite);
}
/* The fsysdep_conn_io routine is supposed to both read and write data
until it has either filled its read buffer or written out all the
data it was given. This lets us write out large packets without
losing incoming data. It handles all types of connections,
including TLI. */
boolean
fsysdep_conn_io (qconn, zwrite, pcwrite, zread, pcread)
struct sconnection *qconn;
const char *zwrite;
size_t *pcwrite;
char *zread;
size_t *pcread;
{
struct ssysdep_conn *q;
size_t cwrite, cread;
int czero;
q = (struct ssysdep_conn *) qconn->psysdep;
cwrite = *pcwrite;
*pcwrite = 0;
cread = *pcread;
*pcread = 0;
czero = 0;
while (TRUE)
{
int cgot, cdid;
size_t cdo;
/* This used to always use nonblocking writes, but it turns out
that some systems don't support them on terminals.
The current algorithm is:
loop:
unblocked read
if read buffer full, return
if nothing to write, return
if HAVE_UNBLOCKED_WRITES
write all data
else
write up to SINGLE_WRITE bytes
if all data written, return
if no data written
blocked write of up to SINGLE_WRITE bytes
This algorithm should work whether the system supports
unblocked writes on terminals or not. If the system supports
unblocked writes but HAVE_UNBLOCKED_WRITES is 0, then it will
call write more often than it needs to. If the system does
not support unblocked writes but HAVE_UNBLOCKED_WRITES is 1,
then the write may hang so long that incoming data is lost.
This is actually possible at high baud rates on any system
when a blocking write is done; there is no solution, except
hardware handshaking. */
/* If we are running on standard input, we switch the file
descriptors by hand. */
if (q->istdout_flags >= 0)
q->o = 0;
/* Do an unblocked read. */
if (! fsblock (q, FALSE))
return FALSE;
/* Loop until we get something (error or data) other than an
acceptable EINTR. */
while (TRUE)
{
/* If we've received a signal, don't continue. */
if (FGOT_QUIT_SIGNAL ())
return FALSE;
#if HAVE_TLI
if (q->ftli)
{
int iflags;
cgot = t_rcv (q->o, zread, cread, &iflags);
if (cgot < 0)
{
if (t_errno == TNODATA)
errno = EAGAIN;
else if (t_errno != TSYSERR)
{
ulog (LOG_ERROR, "t_rcv: %s",
(t_errno >= 0 && t_errno < t_nerr
? t_errlist[t_errno]
: "unknown TLI error"));
return FALSE;
}
}
}
else
#endif
cgot = read (q->o, zread, cread);
if (cgot >= 0)
break;
if (errno != EINTR)
break;
/* We got interrupted by a signal. Log it. */
ulog (LOG_ERROR, (const char *) NULL);
}
if (cgot < 0)
{
if (errno != EAGAIN && errno != EWOULDBLOCK && errno != ENODATA)
{
ulog (LOG_ERROR, "read: %s", strerror (errno));
return FALSE;
}
cgot = 0;
}
cread -= cgot;
zread += cgot;
*pcread += cgot;
/* If we've filled the read buffer, or we have nothing left to
write, return out. */
if (cread == 0 || cwrite == 0)
return TRUE;
/* The port is currently unblocked. Do a write. */
cdo = cwrite;
#if ! HAVE_UNBLOCKED_WRITES
if (q->fterminal && cdo > SINGLE_WRITE)
cdo = SINGLE_WRITE;
#endif
if (q->istdout_flags >= 0)
q->o = 1;
/* Loop until we get something besides EINTR. */
while (TRUE)
{
/* If we've received a signal, don't continue. */
if (FGOT_QUIT_SIGNAL ())
return FALSE;
#if HAVE_TLI
if (q->ftli)
{
cdid = t_snd (q->o, zwrite, cdo, 0);
if (cdid < 0)
{
if (t_errno == TFLOW)
errno = EAGAIN;
else if (t_errno != TSYSERR)
{
ulog (LOG_ERROR, "t_snd: %s",
(t_errno >= 0 && t_errno < t_nerr
? t_errlist[t_errno]
: "unknown TLI error"));
return FALSE;
}
}
}
else
#endif
cdid = write (q->o, zwrite, cdo);
if (cdid >= 0)
break;
if (errno != EINTR)
break;
/* We got interrupted by a signal. Log it. */
ulog (LOG_ERROR, (const char *) NULL);
}
if (cdid < 0)
{
if (errno != EAGAIN && errno != EWOULDBLOCK && errno != ENODATA)
{
ulog (LOG_ERROR, "write: %s", strerror (errno));
return FALSE;
}
cdid = 0;
}
if (cdid > 0)
{
/* We wrote some data. If we wrote everything, return out.
Otherwise loop around and do another read. */
cwrite -= cdid;
zwrite += cdid;
*pcwrite += cdid;
if (cwrite == 0)
return TRUE;
czero = 0;
}
else
{
/* We didn't write any data. Do a blocking write. */
if (q->istdout_flags >= 0)
q->o = 0;
if (! fsblock (q, TRUE))
return FALSE;
cdo = cwrite;
if (cdo > SINGLE_WRITE)
cdo = SINGLE_WRITE;
DEBUG_MESSAGE1 (DEBUG_PORT,
"fsysdep_conn_io: Blocking write of %lud",
(unsigned long) cdo);
if (q->istdout_flags >= 0)
q->o = 1;
/* Loop until we get something besides EINTR. */
while (TRUE)
{
/* If we've received a signal, don't continue. */
if (FGOT_QUIT_SIGNAL ())
return FALSE;
#if HAVE_TLI
if (q->ftli)
{
cdid = t_snd (q->o, zwrite, cdo, 0);
if (cdid < 0 && t_errno != TSYSERR)
{
ulog (LOG_ERROR, "t_snd: %s",
(t_errno >= 0 && t_errno < t_nerr
? t_errlist[t_errno]
: "unknown TLI error"));
return FALSE;
}
}
else
#endif
cdid = write (q->o, zwrite, cdo);
if (cdid >= 0)
break;
if (errno != EINTR)
break;
/* We got interrupted by a signal. Log it. */
ulog (LOG_ERROR, (const char *) NULL);
}
if (cdid < 0)
{
ulog (LOG_ERROR, "write: %s", strerror (errno));
return FALSE;
}
if (cdid == 0)
{
/* On some systems write will return 0 if carrier is
lost. If we fail to write anything ten times in a
row, we assume that this has happened. This is
hacked in like this because there seems to be no
reliable way to tell exactly why the write returned
0. */
++czero;
if (czero >= 10)
{
ulog (LOG_ERROR, "Line disconnected");
return FALSE;
}
}
else
{
cwrite -= cdid;
zwrite += cdid;
*pcwrite += cdid;
czero = 0;
}
}
}
}
/* Send a break character to a serial port. */
static boolean
fsserial_break (qconn)
struct sconnection *qconn;
{
struct ssysdep_conn *q;
q = (struct ssysdep_conn *) qconn->psysdep;
#if HAVE_BSD_TTY
(void) ioctl (q->o, TIOCSBRK, 0);
sleep (2);
(void) ioctl (q->o, TIOCCBRK, 0);
return TRUE;
#endif /* HAVE_BSD_TTY */
#if HAVE_SYSV_TERMIO
(void) ioctl (q->o, TCSBRK, 0);
return TRUE;
#endif /* HAVE_SYSV_TERMIO */
#if HAVE_POSIX_TERMIOS
return tcsendbreak (q->o, 0) == 0;
#endif /* HAVE_POSIX_TERMIOS */
}
/* Send a break character to a stdin port. */
static boolean
fsstdin_break (qconn)
struct sconnection *qconn;
{
struct ssysdep_conn *qsysdep;
qsysdep = (struct ssysdep_conn *) qconn->psysdep;
qsysdep->o = 1;
return fsserial_break (qconn);
}
/* Change the setting of a serial port. */
/*ARGSUSED*/
static boolean
fsserial_set (qconn, tparity, tstrip, txonxoff)
struct sconnection *qconn;
enum tparitysetting tparity;
enum tstripsetting tstrip;
enum txonxoffsetting txonxoff;
{
register struct ssysdep_conn *q;
boolean fchanged, fdo;
int iset = 0;
int iclear = 0;
q = (struct ssysdep_conn *) qconn->psysdep;
if (! q->fterminal)
return TRUE;
fchanged = FALSE;
/* Set the parity for output characters. */
#if HAVE_BSD_TTY
/* This will also cause parity detection on input characters. */
fdo = FALSE;
switch (tparity)
{
case PARITYSETTING_DEFAULT:
break;
case PARITYSETTING_NONE:
#if HAVE_PARITY_BUG
/* The Sony NEWS mishandles this for some reason. */
iset = 0;
iclear = ANYP;
#else
iset = ANYP;
iclear = 0;
#endif
fdo = TRUE;
break;
case PARITYSETTING_EVEN:
iset = EVENP;
iclear = ODDP;
fdo = TRUE;
break;
case PARITYSETTING_ODD:
iset = ODDP;
iclear = EVENP;
fdo = TRUE;
break;
case PARITYSETTING_MARK:
case PARITYSETTING_SPACE:
/* Not supported. */
break;
}
if (fdo)
{
if ((q->snew.stty.sg_flags & iset) != iset
|| (q->snew.stty.sg_flags & iclear) != 0)
{
q->snew.stty.sg_flags |= iset;
q->snew.stty.sg_flags &=~ iclear;
fchanged = TRUE;
}
}
#else /* ! HAVE_BSD_TTY */
fdo = FALSE;
switch (tparity)
{
case PARITYSETTING_DEFAULT:
break;
case PARITYSETTING_NONE:
iset = CS8;
iclear = PARENB | PARODD | (CSIZE &~ CS8);
fdo = TRUE;
break;
case PARITYSETTING_EVEN:
iset = PARENB | CS7;
iclear = PARODD | (CSIZE &~ CS7);
fdo = TRUE;
break;
case PARITYSETTING_ODD:
iset = PARENB | PARODD | CS7;
iclear = CSIZE &~ CS7;
fdo = TRUE;
break;
case PARITYSETTING_MARK:
case PARITYSETTING_SPACE:
/* Not supported. */
break;
}
if (fdo)
{
if ((q->snew.c_cflag & iset) != iset
|| (q->snew.c_cflag & iclear) != 0)
{
q->snew.c_cflag |= iset;
q->snew.c_cflag &=~ iclear;
fchanged = TRUE;
}
}
#endif /* ! HAVE_BSD_TTY */
/* Set whether input characters are stripped to seven bits. */
#if HAVE_BSD_TTY
#ifdef LPASS8
{
int i;
i = LPASS8;
if (tstrip == STRIPSETTING_EIGHTBITS)
{
i = LPASS8;
(void) ioctl (q->o, TIOCLBIS, &i);
}
else if (tstrip == STRIPSETTING_SEVENBITS)
{
i = LPASS8;
(void) ioctl (q->o, TIOCLBIC, &i);
}
}
#endif
#else /* ! HAVE_BSD_TTY */
fdo = FALSE;
switch (tstrip)
{
case STRIPSETTING_DEFAULT:
break;
case STRIPSETTING_EIGHTBITS:
iset = 0;
iclear = ISTRIP;
fdo = TRUE;
break;
case STRIPSETTING_SEVENBITS:
iset = ISTRIP;
iclear = 0;
fdo = TRUE;
break;
}
if (fdo)
{
if ((q->snew.c_iflag & iset) != iset
|| (q->snew.c_iflag & iclear) != 0)
{
q->snew.c_iflag |= iset;
q->snew.c_iflag &=~ iclear;
fchanged = TRUE;
}
}
#endif /* ! HAVE_BSD_TTY */
/* Set XON/XOFF handshaking. */
#if HAVE_BSD_TTY
fdo = FALSE;
switch (txonxoff)
{
case XONXOFF_DEFAULT:
break;
case XONXOFF_OFF:
iset = RAW;
iclear = TANDEM | CBREAK;
fdo = TRUE;
break;
case XONXOFF_ON:
iset = CBREAK | TANDEM;
iclear = RAW;
fdo = TRUE;
break;
}
if (fdo)
{
if ((q->snew.stty.sg_flags & iset) != iset
|| (q->snew.stty.sg_flags & iclear) != 0)
{
q->snew.stty.sg_flags |= iset;
q->snew.stty.sg_flags &=~ iclear;
fchanged = TRUE;
}
}
#else /* ! HAVE_BSD_TTY */
fdo = FALSE;
switch (txonxoff)
{
case XONXOFF_DEFAULT:
break;
case XONXOFF_OFF:
iset = 0;
iclear = IXON | IXOFF;
fdo = TRUE;
break;
case XONXOFF_ON:
#ifdef CRTSCTS
#if HAVE_POSIX_TERMIOS
/* This is system dependent, but I haven't figured out a good
way around it yet. If we are doing hardware flow control, we
don't send XON/XOFF characters but we do recognize them. */
if ((q->snew.c_cflag & CRTSCTS) != 0)
{
iset = IXON;
iclear = IXOFF;
fdo = TRUE;
break;
}
#endif /* HAVE_POSIX_TERMIOS */
#endif /* defined (CRTSCTS) */
iset = IXON | IXOFF;
iclear = 0;
fdo = TRUE;
break;
}
if (fdo)
{
if ((q->snew.c_iflag & iset) != iset
|| (q->snew.c_iflag & iclear) != 0)
{
q->snew.c_iflag |= iset;
q->snew.c_iflag &=~ iclear;
fchanged = TRUE;
}
}
#endif /* ! HAVE_BSD_TTY */
if (fchanged)
{
if (! fsetterminfodrain (q->o, &q->snew))
{
ulog (LOG_ERROR, "Can't change terminal settings: %s",
strerror (errno));
return FALSE;
}
}
#if HAVE_BSD_TTY
if (txonxoff == XONXOFF_ON
&& (q->snew.stty.sg_flags & ANYP) == ANYP)
{
int i;
/* At least on Ultrix, we seem to have to set LLITOUT and
LPASS8. This shouldn't foul things up anywhere else. As far
as I can tell, this has to be done after setting the terminal
into cbreak mode, not before. */
#ifndef LLITOUT
#define LLITOUT 0
#endif
#ifndef LPASS8
#define LPASS8 0
#endif
#ifndef LAUTOFLOW
#define LAUTOFLOW 0
#endif
i = LLITOUT | LPASS8 | LAUTOFLOW;
(void) ioctl (q->o, TIOCLBIS, &i);
#if HAVE_STRIP_BUG
/* Ultrix 4.0 has a peculiar problem: setting CBREAK always
causes input characters to be stripped. I hope this does not
apply to other BSD systems. It is possible to work around
this by using the termio call. I wish this sort of stuff was
not necessary!!! */
{
struct termio s;
if (ioctl (q->o, TCGETA, &s) >= 0)
{
s.c_iflag &=~ ISTRIP;
(void) ioctl (q->o, TCSETA, &s);
}
}
#endif /* HAVE_STRIP_BUG */
}
#endif /* HAVE_BSD_TTY */
return TRUE;
}
/* Change settings of a stdin port. */
static boolean
fsstdin_set (qconn, tparity, tstrip, txonxoff)
struct sconnection *qconn;
enum tparitysetting tparity;
enum tstripsetting tstrip;
enum txonxoffsetting txonxoff;
{
struct ssysdep_conn *qsysdep;
qsysdep = (struct ssysdep_conn *) qconn->psysdep;
qsysdep->o = 0;
return fsserial_set (qconn, tparity, tstrip, txonxoff);
}
/* Run a chat program. */
static boolean
fsrun_chat (oread, owrite, pzprog)
int oread;
int owrite;
char **pzprog;
{
int aidescs[3];
FILE *e;
pid_t ipid;
char *z;
size_t c;
aidescs[0] = oread;
aidescs[1] = owrite;
aidescs[2] = SPAWN_READ_PIPE;
/* Pass fkeepuid, fkeepenv and fshell as TRUE. This puts the
responsibility of maintaing security on the chat program. */
ipid = ixsspawn ((const char **) pzprog, aidescs, TRUE, TRUE,
(const char *) NULL, FALSE, TRUE, (const char *) NULL,
(const char *) NULL, (const char *) NULL);
if (ipid < 0)
{
ulog (LOG_ERROR, "ixsspawn (%s): %s", pzprog[0], strerror (errno));
return FALSE;
}
e = fdopen (aidescs[2], (char *) "r");
if (e == NULL)
{
ulog (LOG_ERROR, "fdopen: %s", strerror (errno));
(void) close (aidescs[2]);
(void) kill (ipid, SIGKILL);
(void) ixswait ((unsigned long) ipid, (const char *) NULL);
return FALSE;
}
/* The FILE e now is attached to stderr of the program. Forward
every line the program outputs to the log file. */
z = NULL;
c = 0;
while (getline (&z, &c, e) > 0)
{
size_t clen;
clen = strlen (z);
if (z[clen - 1] == '\n')
z[clen - 1] = '\0';
if (*z != '\0')
ulog (LOG_NORMAL, "chat: %s", z);
}
xfree ((pointer) z);
(void) fclose (e);
return ixswait ((unsigned long) ipid, "Chat program") == 0;
}
/* Run a chat program on a stdin port. */
/*ARGSUSED*/
static boolean
fsstdin_chat (qconn, pzprog)
struct sconnection *qconn;
char **pzprog;
{
return fsrun_chat (0, 1, pzprog);
}
/* Run a chat program on any general type of connection. */
boolean
fsysdep_conn_chat (qconn, pzprog)
struct sconnection *qconn;
char **pzprog;
{
struct ssysdep_conn *qsysdep;
qsysdep = (struct ssysdep_conn *) qconn->psysdep;
return fsrun_chat (qsysdep->o, qsysdep->o, pzprog);
}
/* Return baud rate of a serial port. */
static long
isserial_baud (qconn)
struct sconnection *qconn;
{
struct ssysdep_conn *qsysdep;
qsysdep = (struct ssysdep_conn *) qconn->psysdep;
return qsysdep->ibaud;
}
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.