--- gas/Makefile	2018/04/24 16:37:55	1.1.1.2
+++ gas/Makefile	2018/04/24 16:39:13	1.1.1.4
@@ -1,68 +1,265 @@
-# This makefile may be used to make either the VAX or the 68020 assembler
+# Makefile for GAS.
+# Copyright (C) 1989, Free Software Foundation
+# 
+# This file is part of GAS, the GNU Assembler.
+# 
+# GAS is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 1, or (at your option)
+# any later version.
+# 
+# GAS is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with GAS; see the file COPYING.  If not, write to
+# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+# This makefile may be used to make the VAX, 68020, 80386, 
+# SPARC, or ns32k assembler(s).
+
+BINDIR = /usr/local/bin
+
+# If you are on a BSD system, un-comment the next two lines, and comment out
+# the lines for SystemV and HPUX below
+G0 = -g -I.
+LDFLAGS = $(CFLAGS)
+#
+# To compile gas on a System Five machine, comment out the two lines above
+# and un-comment out the next three lines
+# Comment out the -lPW on the LOADLIBES line if you are using GCC.
+# G0 = -g -I. -DUSG
+# LDFLAGS = $(CFLAGS)
+# LOADLIBES = -lmalloc -lPW
+#
+# To compile gas for HPUX, link m-hpux.h to m68k.h , and un-comment the
+# next two lines.  (If you are using GCC, comment out the alloca.o part)
+# (Get alloca from the emacs distribution, or use GCC.)
+# G0 = -g -I. -DUSG
+# LOADLIBES = alloca.o
+#
+# To compile gas for a Sequent Symmetry, comment out all the above lines,
+# and un-comment the next two lines.
+# G0 = -g -I. -DUSE_SYSTEM_HDR -DEXEC_VERSION=1
+# LOADLIBES = -lc /usr/att/lib/libc.a
+
+# If you just want to compile the vax assembler, type 'make avax'
+
+# If you just want to compile the i386 assembler, type 'make a386'
+
+# If you just want to compile the ns32k assembler, type 'make a32k'
+
+# If you just want to compile the sparc assembler, type 'make asparc'
+
+# If you just want to compile the mc68020 assembler, make sure m68k.h
+# is correctly set up, and type type 'make a68'  (Except on HPUX machines,
+# where you will have to make the changes marked below before typing
+# 'make a68'
+# m68k.h should be a symbolic or hard-link to one of
+# m-sun3.h , m-hpux.h or m-generic.h
+# depending on which machine you want to compile the 68020 assembler for.
+#
+# If you machine does not have vfprintf, but does have _doprnt(),
+# remove the # from the -DNO_VARARGS line below.
+#
+# If the return-type of a signal-hander is void (instead of int),
+# remove the # from the -DSIGTY line below.
+#
+# To include the mc68851 mmu coprocessor instructions in the 68020 assembler,
+# remove the # from the -Dm68851 line below.
+#
+# If you want the 80386 assembler to correctly handle fsub/fsubr and fdiv/fdivr
+# opcodes (unlike most 80386 assemblers), remove the # from
+# the -DNON_BROKEN_WORDS line below.
+#
+# To compile 80386 Gas for the Sequent Symmetry, un-comment the -DEXEC_VERSION
+# and the -DUSE_SYSTEM_HDR lines below.
+#
+# To compile gas for the HP 9000/300 un-comment the -DUSE_HP_HDR line below.
+#
+
+O1 =  -DNO_VARARGS
+O2 = # -DNON_BROKEN_WORDS
+O3 = # -Dm68851
+O4 = # -DEXEC_VERSION=1
+O5 = # -DSIGTY=void
+G4 = # -DUSE_SYSTEM_HDR
+G5 = # -DUSE_HP_HDR
+
+OPTIONS = $(O1) $(O2) $(O3) $(O4) $(O5)
 
-# This makefile must be changed to to compile the 68020 assembler on
-# the HPUX machines.  See the instructions around line 23.  (They should
-# be clearly marked with HPUX.)
+CFLAGS = $(G0) $(G4) $(G5)
 
+#
 # To make the 68020 assembler compile as the default, un-comment the next
-# four lines, and comment out the four lines below the next (text) comment
-a:	a68
+# line, and comment out all the other lines that start with DEFAULT_GAS
+DEFAULT_GAS=a68
+#
+# To make the VAX assembler compile as the default, un-comment the next
+# line and commment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=avax
+#
+# To make the 80386 assembler compile as the default, un-comment the next
+# line and commment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=a386
+#
+# To make the ns32k assembler compile as the default, un-comment the next
+# line and commment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=a32k
+#
+# To make the sparc assembler compile as the default, un-comment the next
+# line and commment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=asparc
+
+# Global Sources -------------------------------------------------------------
+
+a =\
+as.o		xrealloc.o	xmalloc.o	hash.o		hex-value.o   \
+atof-generic.o	append.o	messages.o	expr.o		app.o         \
+frags.o		input-file.o	input-scrub.o	output-file.o	              \
+subsegs.o	symbols.o					version.o     \
+flonum-const.o	flonum-copy.o	flonum-mult.o	strstr.o	bignum-copy.o \
+gdb.o		gdb-file.o	gdb-symbols.o	gdb-blocks.o	obstack.o     \
+gdb-lines.o
+
+a:	$(DEFAULT_GAS)
 	@rm -f a
-	@ln a68 a
-lint:	lint_68k
-# To make the VAX assembler compile as the default, un-comment the next four
-# lines, and comment out the four lines above this comment
-#a:	avax
-#	@rm -f a
-#	@ln avax a
-#lint:	lint_vax
+	@ln $(DEFAULT_GAS) a
 
-# NOTE:  m68k.h should be a symlink to either m-sun3.h , m-hpux.h or m-generic.h
-# depending on which machine you want to compile the 68020 assembler for.
+# SPARC GAS ------------------------------------------------------------------
+v = sparc.o  atof-m68k.o  write-sparc.o  read-sparc.o
 
-# To compile for HPUX, symlink m-hpux.h to m68k.h , un-comment the
-# next two lines, and comment out the CFLAGS line seven lines (or so) down.
-# CFLAGS = -g -I../hp-include -I.
-# LOADLIBES = -lGNU
-
-# to include the mc68851 mmu coprocessor instructions un-comment
-# the next line, and comment out the following line.  (68020 only)
-# CFLAGS = -g -I. -Dm68851
-CFLAGS = -g -I.
-LDFLAGS = $(CFLAGS)
+V = sparc.c  sparc.h  sparc-opcode.h
 
-x =\
-as.o		xrealloc.o	xmalloc.o	hash.o		hex-value.o\
-atof-generic.o	append.o	messages.o	expr.o		app.o\
-frags.o		input-file.o	input-scrub.o	output-file.o	read.o\
-subsegs.o	symbols.o	write.o		error.o		version.o\
-flonum-const.o	flonum-copy.o	flonum-mult.o	strstr.o	bignum-copy.o \
-gdb.o		gdb-file.o	gdb-symbols.o	gdb-blocks.o	obstack.o\
-gdb-lines.o
+atof-m68k.o:	flonum.h
+sparc.o:	sparc.c sparc.h sparc-opcode.h as.h frags.h struc-symbol.h
+sparc.o:	flonum.h expr.h hash.h md.h write.h read.h symbols.h
+	$(CC) -c $(CFLAGS) -DSPARC sparc.c
 
+write-sparc.o:	write.c
+	$(CC) -c -DSPARC $(CFLAGS) write.c
+	mv write.o write-sparc.o
 
-# files that aren't used       flonum-normal.o	flonum-print.o   cpystr.o
-y =\
-m68k.o		atof-m68k.o
-z = \
-vax.o		atof-vax.o	
+read-sparc.o: read.c
+	$(CC) -c -DSPARC $(CFLAGS) read.c
+	mv read.o read-sparc.o
 
-a68: $x $y
-	$(CC) -o a68 $(LDFLAGS) $x $y $(LOADLIBES)
+asparc: $a $v
+	$(CC) -o asparc $(LDFLAGS) $a $v $(LOADLIBES)
 
-avax:	$x $z
-	$(CC) -o avax $(LDFLAGS) $x $z $(LOADLIBES)
+# NS32K GAS ------------------------------------------------------------------
+w = ns32k.o  atof-ns32k.o  write-ns32k.o  read-ns32k.o
 
+W = ns32k.c atof-ns32k.c ns32k-opcode.h
 
-m68k.o:		a.out.h as.h expr.h flonum.h frags.h hash.h
-m68k.o:		m68k-opcode.h m68k.h md.h obstack.h struc-symbol.h pmmu.h
+atof-ns32k.o:	flonum.h
+ns32k.o:	as.h frags.h struc-symbol.h flonum.h expr.h md.h hash.h
+ns32k.o:	write.h symbols.h ns32k-opcode.h
 
-app.o:		as.h
+write-ns32k.o:	write.c
+	$(CC) -c -DNS32K $(CFLAGS) write.c
+	mv write.o write-ns32k.o
+
+read-ns32k.o:
+	$(CC) -c -DNS32K $(CFLAGS) read.c
+	mv read.o read-ns32k.o
+
+a32k: $a $w
+	$(CC) -o a32k $(LDFLAGS) $a $w $(LOADLIBES)
+
+# 80386 GAS ------------------------------------------------------------------
+x = i386.o  atof-i386.o  write.o  read.o
+
+X = i386.c  atof-i386.c  i386.h  i386-opcode.h
+
+i386.o:		i386.c as.h read.h flonum.h frags.h struc-symbol.h expr.h
+i386.o:		symbols.h hash.h md.h i386.h i386-opcode.h
+	$(CC) $(CFLAGS) $(OPTIONS) -c i386.c
+
+atof-i386.o:	flonum.h
+
+a386: $a $x
+	$(CC) -o a386 $(LDFLAGS) $a $x $(LOADLIBES)
+
+# 68020 GAS ------------------------------------------------------------------
+y = m68k.o  atof-m68k.o  write.o  read.o
+
+Y = m68k.c atof-m68k.c m68k-opcode.h m-hpux.h m-sun3.h m-generic.h
 
-as.o:		a.out.h as.h read.h struc-symbol.h write.h
-atof-generic.o:	flonum.h
 atof-m68k.o:	flonum.h
+m68k.o:		m68k.c a.out.h as.h expr.h flonum.h frags.h hash.h
+m68k.o:		m68k-opcode.h m68k.h md.h obstack.h struc-symbol.h
+	$(CC) $(CFLAGS) $(OPTIONS) -c m68k.c
+
+a68: $a $y
+	$(CC) -o a68 $(LDFLAGS) $a $y $(LOADLIBES)
+
+# VAX GAS --------------------------------------------------------------------
+z = vax.o  atof-vax.o  write.o  read.o
+
+Z = vax.c atof-vax.c vax-opcode.h vax-inst.h    make-gas.com objrecdef.h vms.c
+
+vax.o:		vax.c a.out.h as.h expr.h flonum.h frags.h md.h obstack.h
+vax.o:		read.h struc-symbol.h symbols.h vax-inst.h vax-opcode.h
 atof-vax.o:	as.h flonum.h read.h
+
+avax:	$a $z
+	$(CC) -o avax $(LDFLAGS) $a $z $(LOADLIBES)
+
+# global files ---------------------------------------------------------------
+
+as.o: as.c
+	$(CC) $(CFLAGS) $(OPTIONS) -c as.c
+
+messages.o: messages.c
+	$(CC) $(CFLAGS) $(OPTIONS) -c messages.c
+
+hash.o:	hash.c
+	$(CC) $(CFLAGS) -Derror=as_fatal -c hash.c
+
+xmalloc.o:	xmalloc.c
+	$(CC) $(CFLAGS) -Derror=as_fatal -c xmalloc.c
+
+xrealloc.o:	xrealloc.c
+	$(CC) $(CFLAGS) -Derror=as_fatal -c xrealloc.c
+
+A =\
+as.c		xrealloc.c	xmalloc.c	hash.c		hex-value.c \
+atof-generic.c	append.c	messages.c	expr.c		bignum-copy.c \
+frags.c		input-file.c	input-scrub.c	output-file.c	read.c \
+subsegs.c	symbols.c	write.c				strstr.c \
+flonum-const.c	flonum-copy.c	flonum-mult.c	app.c		version.c \
+gdb.c		gdb-file.c	gdb-symbols.c	gdb-blocks.c	obstack.c \
+gdb-lines.c
+
+H = \
+a.out.h		as.h		bignum.h	expr.h		flonum.h \
+frags.h		hash.h		input-file.h	md.h	 \
+obstack.h	read.h		struc-symbol.h	subsegs.h	\
+symbols.h	write.h
+
+dist: COPYING README ChangeLog $A $H $Z $Y $X $W $V Makefile
+	echo gas-`sed -e 's/[^0-9.]*\([0-9.]*\).*/\1/' -e q < version.c` > .fname
+	mkdir `cat .fname`
+
+	ln COPYING README ChangeLog $A $H $Z $Y $X $W $V Makefile `cat .fname`
+	tar cvhZf `cat .fname`.tar.Z `cat .fname`
+	-rm -r `cat .fname`
+
+clean:
+	rm -f a avax a68 a386 a32k asparc $a $v $w $x $y $z a core gmon.out bugs a.out
+
+install:	a
+	cp a $(BINDIR)/gas
+
+
+# General .o-->.h dependencies
+
+app.o:		as.h
+as.o:		a.out.h as.h read.h struc-symbol.h write.h
+atof-generic.o:	flonum.h
 bignum-copy.o:	bignum.h
 expr.o:		a.out.h as.h expr.h flonum.h obstack.h read.h struc-symbol.h
 expr.o:		 symbols.h
@@ -85,60 +282,8 @@ read.o:		a.out.h as.h expr.h flonum.h fr
 read.o:		read.h struc-symbol.h symbols.h
 subsegs.o:	a.out.h as.h frags.h obstack.h struc-symbol.h subsegs.h write.h
 symbols.o:	a.out.h as.h frags.h hash.h obstack.h struc-symbol.h symbols.h
-vax.o:		a.out.h as.h expr.h flonum.h frags.h md.h obstack.h read.h
-vax.o:		struc-symbol.h symbols.h vax-inst.h vax-opcode.h
 write.o:	a.out.h as.h md.h obstack.h struc-symbol.h subsegs.h
 write.o:	symbols.h write.h
 
 flonum.h:					bignum.h
 
-# app is no longer a separate process.
-# app:	app.c
-#	$(CC) -o app app.c
-clean:
-	rm -f avax a68 $x $y $z a core gmon.out
-
-oprint:	oprint.o pp.o
-	$(CC) $(LDFLAGS) -o oprint oprint.o pp.o
-
-
-A =\
-as.c		xrealloc.c	xmalloc.c	hash.c		hex-value.c\
-atof-generic.c	append.c	messages.c	expr.c		bignum-copy.c\
-frags.c		input-file.c	input-scrub.c	output-file.c	read.c\
-subsegs.c	symbols.c	write.c		error.c		strstr.c\
-flonum-const.c	flonum-copy.c	flonum-mult.c	app.c		version.c\
-gdb.c		gdb-file.c	gdb-symbols.c	gdb-blocks.c	obstack.c\
-gdb-lines.c
-
-B =\
-m68k.c		atof-m68k.c	
-
-C =\
-vax.c		atof-vax.c
-
-H = \
-a.out.h		as.h		bignum.h	expr.h		flonum.h \
-frags.h		hash.h		input-file.h	m68k-opcode.h	md.h	 \
-obstack.h	read.h		struc-symbol.h	subsegs.h		 \
-symbols.h	vax-inst.h	vax-opcode.h	write.h			 \
-m-sun3.h	m-generic.h	pmmu.h		m-hpux.h
-
-V = \
-make-gas.com objrecdef.h vms.c
-
-# JF unused	flonum-normal.c	flonum-print.c cpystr.c
-
-lint_68k:
-	lint -I. $A $B
-
-lint_vax:
-	lint -I. $A $C
-
-gas-dist.tar: COPYING README $A $B $C $H $V Makefile
-	tar cvf gas-dist.tar COPYING README $A $B $C $H $V Makefile
-
-gas-dist.tar.Z:	gas-dist.tar
-	compress < gas-dist.tar > gas-dist.tar.Z
-
-dist:	gas-dist.tar gas-dist.tar.Z