--- gcc/INSTALL 2018/04/24 18:00:44 1.1.1.4 +++ gcc/INSTALL 2018/04/24 18:06:46 1.1.1.5 @@ -1,11 +1,10 @@ -This file documents the installation of the GNU compiler. Copyright (C) -1988, 1989, 1992 Free Software Foundation, Inc. You may copy, +This file documents the installation of the GNU compiler. Copyright +(C) 1988, 1989, 1992 Free Software Foundation, Inc. You may copy, distribute, and modify it freely as long as you preserve this copyright notice and permission notice. - Installing GNU CC -****************** +***************** Here is the procedure for installing GNU CC on a Unix system. @@ -25,7 +24,7 @@ Installing GNU CC If you are building a compiler to produce code for the machine it runs on, specify just one machine type. Use the `--target' - option; the host type will default to be the same as the target. + option; the host type will default to be the same as the target. (For information on building a cross-compiler, see *Note Cross-Compiler::.) The command looks like this: @@ -35,13 +34,13 @@ Installing GNU CC abbreviated. A canonical configuration name has three parts, separated by - dashes. It looks like this: `CPU-COMPANY-SYSTEM'. (The three parts - may themselves contain dashes; `configure' can figure out which - dashes serve which purpose.) For example, `m68k-sun-sunos4.1' - specifies a Sun 3. + dashes. It looks like this: `CPU-COMPANY-SYSTEM'. (The three + parts may themselves contain dashes; `configure' can figure out + which dashes serve which purpose.) For example, + `m68k-sun-sunos4.1' specifies a Sun 3. You can also replace parts of the configuration by nicknames or - aliases. For example, `sun3' stands for `m68k-sun', so + aliases. For example, `sun3' stands for `m68k-sun', so `sun3-sunos4.1' is another way to specify a Sun 3. You can also use simply `sun3-sunos', since the version of SunOS is assumed by default to be version 4. `sun3-bsd' also works, since `configure' @@ -54,16 +53,17 @@ Installing GNU CC Here are the possible CPU types: - a29k, alpha, arm, cN, elxsi, hppa1.0, hppa1.1, i386, i860, - i960, m68000, m68k, m88k, mips, ns32k, pyramid, romp, rs6000, - sparc, vax, we32k. + a29k, alpha, arm, cN, clipper, elxsi, h8300, hppa1.0, hppa1.1, + i386, i860, i960, m68000, m68k, m88k, mips, ns32k, pyramid, + romp, rs6000, sh, sparc, sparclite, vax, we32k. Here are the recognized company names. As you can see, customary abbreviations are used rather than the longer official names. - alliant, altos, apollo, att, cbm, convergent, convex, crds, - dec, dg, encore, harris, hp, ibm, mips, motorola, ncr, next, - ns, omron, sequent, sgi, sony, sun, tti, unicom. + alliant, altos, apollo, att, bull, cbm, convergent, convex, + crds, dec, dg, dolphin, elxsi, encore, harris, hitachi, hp, + ibm, intergraph, isi, mips, motorola, ncr, next, ns, omron, + plexus, sequent, sgi, sony, sun, tti, unicom. The company name is meaningful only to disambiguate when the rest of the information supplied is insufficient. You can omit it, @@ -72,9 +72,9 @@ Installing GNU CC Here is a list of system types: - aix, aos, bsd, ctix, dgux, dynix, genix, hpux, isc, linux, - luna, mach, minix, newsos, osf, osfrose, riscos, sco, sunos, - sysv, ultrix, unos, vms. + aix, acis, aos, bsd, clix, ctix, dgux, dynix, genix, hpux, + isc, linux, luna, mach, minix, newsos, osf, osfrose, riscos, + sco, solaris, sunos, sysv, ultrix, unos, vms. You can omit the system type; then `configure' guesses the operating system from the CPU and company. @@ -88,13 +88,13 @@ Installing GNU CC If you specify an impossible combination such as `i860-dg-vms', then you may get an error message from `configure', or it may ignore part of the information and do the best it can with the - rest. `configure' always prints the canonical name for the + rest. `configure' always prints the canonical name for the alternative that it used. Often a particular model of machine has a name. Many machine - names are recognized as aliases for CPU/company combinations. + names are recognized as aliases for CPU/company combinations. Thus, the machine name `sun3', mentioned above, is an alias for - `m68k-sun'. Sometimes we accept a company name as a machine name, + `m68k-sun'. Sometimes we accept a company name as a machine name, when the name is popularly used for a particular machine. Here is a table of the known machine names: @@ -114,22 +114,32 @@ Installing GNU CC `--with-gnu-as', `--with-gnu-ld', `--with-stabs' and `--nfp'. `--with-gnu-as' - On certain systems, you must specify whether you want GNU CC - to work with the usual compilation tools or with the GNU - compilation tools (including GAS). Use the `--with-gnu-as' - argument when you run `configure', if you want to use the GNU - tools. (Specify `--with-gnu-ld' as well, since on these - systems GAS works only with the GNU linker.) The systems - where this makes a difference are `i386-ANYTHING-sysv', - `i860-ANYTHING-bsd', `m68k-hp-hpux', `m68k-sony-bsd', - `m68k-altos-sysv', `m68000-hp-hpux', and `m68000-att-sysv'. - On any other system, `--with-gnu-as' has no effect. + If you will use GNU CC with the GNU assembler (GAS), you + should declare this by using the `--with-gnu-as' option when + you run `configure'. + + Using this option does not install GAS. It only modifies the + output of GNU CC to work with GAS. Building and installing + GAS is up to you. + + The systems where it makes a difference whether you use GAS + are `i386-ANYTHING-sysv', `i860-ANYTHING-bsd', + `m68k-hp-hpux', `m68k-sony-bsd', `m68k-altos-sysv', + `m68000-hp-hpux', `m68000-att-sysv', and `mips-ANY'). On any + other system, `--with-gnu-as' has no effect. + + On the systems listed above, if you use GAS, you should also + use the GNU linker (and specify `--with-gnu-ld'). `--with-gnu-ld' Specify the option `--with-gnu-ld' if you plan to use the GNU - linker. This inhibits the installation of `collect2', a - program which otherwise serves as a front-end for the - system's linker on most configurations. + linker with GNU CC. + + This option does not cause the GNU linker to be installed; it + just modifies the behavior of GNU CC to work with the GNU + linker. Specifically, it inhibits the installation of + `collect2', a program which otherwise serves as a front-end + for the system's linker on most configurations. `--with-stabs' On MIPS based systems, you must specify whether you want GNU @@ -150,60 +160,51 @@ Installing GNU CC `--nfp' On certain systems, you must specify whether the machine has - a floating point unit. These systems are `m68k-sun-sunosN' - and `m68k-isi-bsd'. On any other system, `--nfp' currently - has no effect, though perhaps there are other systems where - it could usefully make a difference. + a floating point unit. These systems include + `m68k-sun-sunosN' and `m68k-isi-bsd'. On any other system, + `--nfp' currently has no effect, though perhaps there are + other systems where it could usefully make a difference. If you want to install your own homemade configuration files, you can use `local' as the company name to access them. If you use - configuration `CPU-local', the entire configuration name is used - to form the configuration file names. + configuration `CPU-local', the configuration name without the cpu + prefix is used to form the configuration file names. - Thus, if you specify `m68k-local', then the files used are - `m68k-local.md', `m68k-local.h', `m68k-local.c', - `xm-m68k-local.h', `t-m68k-local', and `x-m68k-local'. + Thus, if you specify `m68k-local', configuration uses files + `local.md', `local.h', `local.c', `xm-local.h', `t-local', and + `x-local', all in the directory `config/m68k'. Here is a list of configurations that have special treatment or special things you must know: `alpha-*-osf1' Systems using processors that implement the DEC Alpha - architecture and are running the OSF/1 operating system. (VMS - on the Alpha is not currently supported by GNU CC.) As of - this writing, the only Alpha-based product currently - available from DEC is the 21064 (EV4) processor chip; no - system-level products can be ordered. This port is provided - for those developers who might have early Alpha hardware from - DEC or other vendors and run the OSF/1 operating system. It - has not been extensively tested and both the C++ and - Objective-C languages may not work, except in a - cross-compilation environment. - - The `ASSEMBLE_FILE_START' macro writes a `.verstamp' directive - containing the version of the calling sequence. Currently, - we use `9 0', which we believe will work until the official - release by DEC of their system, at which point `3 11' is the - correct value. If you get a mismatch error from the - assembler on a `.verstamp' line, consult the file - `/usr/include/stamp.h' for the present value. GNU C on the - Alpha does not support versions of DEC's OSF/1 earlier than - BL9; if you are running an older version, we suggest you ask - your DEC contact for an update. + architecture and are running the OSF/1 operating system, for + example the DEC Alpha AXP systems. (VMS on the Alpha is not + currently supported by GNU CC.) + + GNU CC writes a `.verstamp' directive to the assembler output + file unless it is built as a cross-compiler. It gets the + version to use from the system header file + `/usr/include/stamp.h'. If you install a new version of + OSF/1, you should rebuild GCC to pick up the new version + stamp. Note that since the Alpha is a 64-bit architecture, cross-compilers from 32-bit machines will not generate as efficient code as that generated when the compiler is running on a 64-bit machine because many optimizations that depend on being able to represent a word on the target in an integral - value on the host cannot be performed. + value on the host cannot be performed. Building + cross-compilers for 32-bit machines that run on the Alpha has + not been tested and may not work properly. `a29k' - AMD Am29K-family processors. These are normally used in + AMD Am29k-family processors. These are normally used in embedded applications. There are no standard Unix - configurations. This configuration corresponds to AMD's + configurations. This configuration corresponds to AMD's standard calling sequence and binary interface and is - compatible with other 29K tools. + compatible with other 29k tools. You may need to make a variant of the file `a29k.h' for your particular configuration. @@ -217,11 +218,21 @@ Installing GNU CC more details. `i386-*-sco' - Compilation with RCC is recommended. + Compilation with RCC is recommended. Also, it may be a good + idea to link with GNU malloc instead of the malloc that comes + with the system. + + `i386-*-isc' + It may be good idea to link with GNU malloc instead of the + malloc that comes with the system. + + `i386-*-esix' + It may be good idea to link with GNU malloc instead of the + malloc that comes with the system. `i386-ibm-aix' - You need a version of GAS that you can get from - `tranle@intellicorp.com'. + You need to use GAS version 2.1 or later, and and LD from GNU + binutils version 2.2 or later. `i386-sequent' Go to the Berkeley universe before compiling. In addition, @@ -249,8 +260,8 @@ Installing GNU CC `m68k-altos' Altos 3068. You must use the GNU assembler, linker and - debugger, with COFF-encapsulation. Also, you must fix a - kernel bug. Details in the file `README.ALTOS'. + debugger. Also, you must fix a kernel bug. Details in the + file `README.ALTOS'. `m68k-hp-hpux' HP 9000 series 300 or 400 running HP-UX. HP-UX version 8.0 @@ -267,18 +278,21 @@ Installing GNU CC handlers for floating point traps inherently cannot work with the FPA. - `m88k-svr3' + `m88k-*-svr3' Motorola m88k running the AT&T/Unisoft/Motorola V.3 reference - port. These systems tend to use the Green Hills C, revision + port. These systems tend to use the Green Hills C, revision 1.8.5, as the standard C compiler. There are apparently bugs in this compiler that result in object files differences between stage 2 and stage 3. If this happens, make the stage 4 compiler and compare it to the stage 3 compiler. If the stage 3 and stage 4 object files are identical, this suggests - a problem with the standard C compiler. It is best, however, - to use an older version of GNU CC for bootstrapping. + you encountered a problem with the standard C compiler; the + stage 3 and 4 compilers may be usable. + + It is best, however, to use an older version of GNU CC for + bootstrapping if you have one. - `m88k-dgux' + `m88k-*-dgux' Motorola m88k running DG/UX. To build native or cross compilers on DG/UX, you must first change to the 88open BCS software development environment. This is done by issuing @@ -286,17 +300,34 @@ Installing GNU CC eval `sde-target m88kbcs` + `m88k-tektronix-sysv3' + Tektronix XD88 running UTekV 3.2e. Do not turn on + optimization while building stage1 if you bootstrap with the + buggy Green Hills compiler. Also, The bundled LAI System V + NFS is buggy so if you build in an NFS mounted directory, + start from a fresh reboot, or avoid NFS all together. + Otherwise you may have trouble getting clean comparisons + between stages. + `mips-mips-bsd' - MIPS machines running the MIPS operating system in BSD mode. + MIPS machines running the MIPS operating system in BSD mode. It's possible that some old versions of the system lack the functions `memcpy', `memcmp', and `memset'. If your system lacks these, you must remove or undo the definition of `TARGET_MEM_FUNCTIONS' in `mips-bsd.h'. + `mips-sgi-*' + Silicon Graphics MIPS machines running IRIX. In order to + compile GCC on an SGI the "c.hdr.lib" option must be + installed from the CD-ROM supplied from Silicon Graphics. + This is found on the 2nd CD in release 4.0.1. + `mips-sony-sysv' Sony MIPS NEWS. This works in NEWSOS 5.0.1, but not in 5.0.2 (which uses ELF instead of COFF). Support for 5.0.2 will - probably be provided soon by volunteers. + probably be provided soon by volunteers. In particular, the + linker does not like the code generated by GCC when shared + libraries are linked in. `ns32k-encore' Encore ns32000 system. Encore systems are supported only @@ -322,16 +353,16 @@ Installing GNU CC `romp-*-mach' The only operating systems supported for the IBM RT PC are AOS and MACH. GNU CC does not support AIX running on the RT. - We recommend you compile GNU CC with an earlier version of + We recommend you compile GNU CC with an earlier version of itself; if you compile GNU CC with `hc', the Metaware compiler, it will work, but you will get mismatches between - the stage 2 and stage 3 compilers in various files. These + the stage 2 and stage 3 compilers in various files. These errors are minor differences in some floating-point constants and can be safely ignored; the stage 3 compiler is correct. `rs6000-*-aix' *Read the file `README.RS6000' for information on how to get - a fix for a problem in the IBM assembler that prevents use of + a fix for problems in the IBM assembler that interfere with GNU CC.* You must either obtain the new assembler or avoid using the `-g' switch. Note that `Makefile.in' uses `-g' by default when compiling `libgcc2.c'. @@ -347,7 +378,7 @@ Installing GNU CC compiler first, and use it to recompile building all the languages that you want to run. - Here we spell out what files will be set up by `configure'. + Here we spell out what files will be set up by `configure'. Normally you need not be concerned with these files. * A symbolic link named `config.h' is made to the top-level @@ -357,7 +388,7 @@ Installing GNU CC machine. It includes `tm.h'. The top-level config file is located in the subdirectory - `config'. Its name is always `xm-SOMETHING.h'; usually + `config'. Its name is always `xm-SOMETHING.h'; usually `xm-MACHINE.h', but there are some exceptions. If your system does not support symbolic links, you might @@ -383,13 +414,26 @@ Installing GNU CC output subroutine file for your machine. It should be in the `config' subdirectory and its name should be `MACHINE.c'. - * The command file `configure' also constructs `Makefile' by - adding some text to the template file `Makefile.in'. The - additional text comes from files in the `config' directory, - named `t-TARGET' and `h-HOST'. If these files do not exist, - it means nothing needs to be added for a given target or host. + * The command file `configure' also constructs the file + `Makefile' by adding some text to the template file + `Makefile.in'. The additional text comes from files in the + `config' directory, named `t-TARGET' and `x-HOST'. If these + files do not exist, it means nothing needs to be added for a + given target or host. + + 4. The standard directory for installing GNU CC is `/usr/local/lib'. + If you want to install its files somewhere else, specify + `--prefix=DIR' when you run `configure'. Here DIR is a directory + name to use instead of `/usr/local' for all purposes with one + exception: the directory `/usr/local/include' is searched for + header files no matter where you install the compiler. + + 5. Specify `--local-prefix=DIR' if you want the compiler to search + directory `DIR/include' for header files *instead* of + `/usr/local/include'. (This is for systems that have different + conventions for where to put site-specific things.) - 4. Make sure the Bison parser generator is installed. (This is + 6. Make sure the Bison parser generator is installed. (This is unnecessary if the Bison output files `c-parse.c' and `cexp.c' are more recent than `c-parse.y' and `cexp.y' and you do not plan to change the `.y' files.) @@ -397,7 +441,7 @@ Installing GNU CC Bison versions older than Sept 8, 1988 will produce incorrect output for `c-parse.c'. - 5. Build the compiler. Just type `make LANGUAGES=c' in the compiler + 7. Build the compiler. Just type `make LANGUAGES=c' in the compiler directory. `LANGUAGES=c' specifies that only the C compiler should be @@ -412,9 +456,11 @@ Installing GNU CC the list `c', `c++', and `objective-c'. Ignore any warnings you may see about "statement not reached" in - `insn-emit.c'; they are normal. Any other compilation errors may - represent bugs in the port to your machine or operating system, and - should be investigated and reported. + `insn-emit.c'; they are normal. Also, warnings about "unknown + escape sequence" are normal in `genopinit.c' and perhaps some + other files. Any other compilation errors may represent bugs in + the port to your machine or operating system, and should be + investigated and reported. Some commercial compilers fail to compile GNU CC because they have bugs or limitations. For example, the Microsoft compiler is said @@ -423,30 +469,36 @@ Installing GNU CC the problem happens. If you are building with a previous GNU C compiler, do not use - `CC=gcc' on the make command or by editing the Makefile. Instead, + `CC=gcc' on the make command or by editing the Makefile. Instead, use a full pathname to specify the compiler, such as `CC=/usr/local/bin/gcc'. This is because make might execute the `gcc' in the current directory before all of the compiler components have been built. - 6. If you are using COFF-encapsulation, you must convert `libgcc.a' to - a GNU-format library at this point. See the file `README.ENCAP' - in the directory containing the GNU binary file utilities, for - directions. - - 7. If you are building a cross-compiler, stop here. *Note + 8. If you are building a cross-compiler, stop here. *Note Cross-Compiler::. - 8. Move the first-stage object files and executables into a + 9. Move the first-stage object files and executables into a subdirectory with this command: make stage1 - The files are moved into a subdirectory named `stage1'. Once + The files are moved into a subdirectory named `stage1'. Once installation is complete, you may wish to delete these files with `rm -r stage1'. - 9. Recompile the compiler with itself, with this command: + 10. If you have chosen a configuration for GNU CC which requires other + GNU tools (such as GAS or the GNU linker) instead of the standard + system tools, install the required tools in the `stage1' + subdirectory under the names `as', `ld' or whatever is + appropriate. This will enable the stage 1 compiler to find the + proper tools in the following stage. + + Alternatively, you can do subsequent compilation using a value of + the `PATH' environment variable such that the necessary GNU tools + come before the standard system tools. + + 11. Recompile the compiler with itself, with this command: make CC="stage1/xgcc -Bstage1/" CFLAGS="-g -O" @@ -473,8 +525,10 @@ Installing GNU CC make CC="stage1/xgcc -Bstage1/" CFLAGS="-g -O -msoft-float" - 10. If you wish to test the compiler by compiling it with itself one - more time, do this: + 12. If you wish to test the compiler by compiling it with itself one + more time, install any other necessary GNU tools (such as GAS or + the GNU linker) in the `stage2' subdirectory as you did in the + `stage1' subdirectory, then do this: make stage2 make CC="stage2/xgcc -Bstage2/" CFLAGS="-g -O" @@ -510,33 +564,40 @@ Installing GNU CC If you have built the compiler with the `-mno-mips-tfile' option on MIPS machines, you will not be able to compare the files. - 11. Install the compiler driver, the compiler's passes and run-time - support. You can use the following command: + The Alpha stores file names in the object files and `make compare' + does not know how to ignore them, so normally you cannot compare + on the Alpha. However, if you use the `-save-temps' option when + compiling *both* stage 2 and stage 3, this causes the same file + names to be used in both stages; then you can do the comparison. + + 13. Install the compiler driver, the compiler's passes and run-time + support with `make install'. Use the same value for `CC', + `CFLAGS' and `LANGUAGES' that you used when compiling the files + that are being installed. One reason this is necessary is that + some versions of Make have bugs and recompile files gratuitously + when you do this step. If you use the same variable values, those + files will be recompiled properly. - make install CC="stage2/xgcc -Bstage2/" CFLAGS="-g -O" LANGUAGES="LIST" + For example, if you have built the stage 2 compiler, you can use + the following command: - (Use the same value for `CC', `CFLAGS' and `LANGUAGES' that you - used when compiling the files that are being installed. One - reason this is necessary is that some versions of Make have bugs - and recompile files gratuitously when you do this step. If you - use the same variable values, those files will be recompiled - properly. + make install CC="stage2/xgcc -Bstage2/" CFLAGS="-g -O" LANGUAGES="LIST" This copies the files `cc1', `cpp' and `libgcc.a' to files `cc1', - `cpp' and `libgcc.a' in directory + `cpp' and `libgcc.a' in the directory `/usr/local/lib/gcc-lib/TARGET/VERSION', which is where the compiler driver program looks for them. Here TARGET is the target machine type specified when you ran `configure', and VERSION is the version number of GNU CC. This naming scheme permits various versions and/or cross-compilers to coexist. - It also copies the driver program `gcc' into the directory - `/usr/local/bin', so that it appears in typical execution search - paths. - - On some systems, this command will cause recompilation of some - files. This is usually due to bugs in `make'. You should either - ignore this problem, or use GNU Make. + This also copies the driver program `xgcc' into + `/usr/local/bin/gcc', so that it appears in typical execution + search paths. + + On some systems, this command causes recompilation of some files. + This is usually due to bugs in `make'. You should either ignore + this problem, or use GNU Make. *Warning: there is a bug in `alloca' in the Sun library. To avoid this bug, be sure to install the executables of GNU CC that were @@ -548,68 +609,20 @@ Installing GNU CC or 3, since they usually run faster than the ones compiled with some other compiler.) - 12. Install the Objective C library (if you have built the Objective C + 14. Install the Objective C library (if you have built the Objective C compiler). Here is the command to do this: make install-libobjc CC="stage2/xgcc -Bstage2/" CFLAGS="-g -O" - 13. Correct errors in the header files on your machine. - - Various system header files often contain constructs which are - erroneous, incompatible with ANSI C or otherwise unsuitable, and - they will not work when you compile programs with GNU CC. - - The most common erroneous construct is found in `ioctl.h', where a - macro expects argument values to be substituted for argument names - inside of character constants--something not done in ANSI C. This - particular problem can be prevented by using `-traditional'. Other - problems are not so easy to work around. - - GNU CC comes with shell scripts to fix known header file problems. - They install corrected copies of various header files in a - special directory where only GNU CC will normally look for them. - The scripts adapt to various systems by searching all the system - header files for the problem cases that we know about. - - Use the following command to do this: - - make install-fixincludes - - If you selected a different directory for GNU CC installation when - you installed it, by specifying the Make variable `prefix' or - `libdir', specify it the same way in this command. - - Note that some systems are starting to come with ANSI C system - header files. On these systems, don't run `install-fixincludes'; - it may not work, and is certainly not necessary. One exception: - there are is a special script for System V release 4, which you - should run. - - It is not the purpose of `install-fixincludes' to add prototypes to - the system header files. We support headers with ANSI C - prototypes in the GNU C Library, and we have no time to support - adding them to other systems' header files. - - 14. If you're going to use C++, it's likely that you need to also - install the `libg++' distribution. It should be available from - the same place where you got the GCC distribution. Just as GCC + 15. If you're going to use C++, it's likely that you need to also + install the libg++ distribution. It should be available from the + same place where you got the GNU C distribution. Just as GNU C does not distribute a C runtime library, it also does not include a C++ run-time library. All I/O functionality, special class - libraries, etc., are available in the `libg++' distribution. - - If you cannot install the compiler's passes and run-time support in -`/usr/local/lib', you can alternatively use the `-B' option to specify -a prefix by which they may be found. The compiler concatenates the -prefix with the names `cpp', `cc1' and `libgcc.a'. Thus, you can put -the files in a directory `/usr/foo/gcc' and specify `-B/usr/foo/gcc/' -when you run GNU CC. - - Also, you can specify an alternative default directory for these -files by setting the Make variable `libdir' when you make GNU CC. - + libraries, etc., are available in the libg++ distribution. Compilation in a Separate Directory -==================================== +=================================== If you wish to build the object files and executables in a directory other than the one containing the source files, here is what you must @@ -652,16 +665,15 @@ configuration steps shown above, when or must, however, run `configure' again when the configuration files change, if your system does not support symbolic links. - Building and Installing a Cross-Compiler -========================================= +======================================== GNU CC can function as a cross-compiler for many machines, but not all. - * Cross-compilers for the Mips as target do not work because the - auxiliary programs `mips-tdump.c' and `mips-tfile.c' can't be - compiled on anything but a Mips. + * Cross-compilers for the Mips as target currently do not work + because the auxiliary programs `mips-tdump.c' and `mips-tfile.c' + can't be compiled on anything but a Mips. * Cross-compilers to or from the Vax probably don't work completely because the Vax uses an incompatible floating point format (not @@ -684,13 +696,13 @@ system and produces code for an HP 68030 Next you should install the cross-assembler and cross-linker (and `ar' and `ranlib'). Put them in the directory `/usr/local/TARGET/bin'. - The installation of GNU CC will find them there and copy or link them +The installation of GNU CC will find them there and copy or link them to the proper place to find them when you run the cross-compiler later. If you want to install any additional libraries to use with the cross-compiler, put them in the directory `/usr/local/TARGET/lib'; all files in that subdirectory will be installed in the proper place when -you install the cross-compiler. Likewise, put the header files for the +you install the cross-compiler. Likewise, put the header files for the target machine in `/usr/local/TARGET/include'. You must now produce a substitute for `libgcc1.a'. Normally this @@ -700,14 +712,14 @@ machine's compiler also doesn't work--th run on the host, and you need it to run on the target. We can't give you any automatic way to produce this substitute. For -some targets, the subroutines in `libgcc1.c' are not actually used. You -need not provide the ones that won't be used. The ones that most +some targets, the subroutines in `libgcc1.c' are not actually used. +You need not provide the ones that won't be used. The ones that most commonly are used are the multiplication, division and remainder routines--many RISC machines rely on the library for this. One way to make them work is to define the appropriate `perform_...' macros for the subroutines that you need. If these definitions do not use the C arithmetic operators that they are meant to implement, you might be -able to compile them with the cross-compiler you are building. To do +able to compile them with the cross-compiler you are building. To do this, specify `LIBGCC1=libgcc1.a OLDCC=./xgcc' when building the compiler. @@ -738,9 +750,8 @@ for a 386 as the host). If you want to whether you compile it on a 68030 or with a cross-compiler on a 386, you must specify a 68030 as the host when you configure it. - -Installing GNU CC on the HP Precision Architecture -=================================================== +Installing on the HP Precision Architecture +=========================================== There are two variants of this CPU, called 1.0 and 1.1, which have different machine descriptions. You must use the right one for your @@ -778,9 +789,26 @@ recently. To enable debugging, configure GNU CC with the `--gas' option before building. + It has been reported that GNU CC produces invalid assembly code for +1.1 machines running HP-UX 8.02 when using the HP assembler. Typically +the errors look like this: + as: bug.s @line#15 [err#1060] + Argument 0 or 2 in FARG upper + - lookahead = ARGW1=FR,RTNVAL=GR + as: foo.s @line#28 [err#1060] + Argument 0 or 2 in FARG upper + - lookahead = ARGW1=FR + + You can check the version of HP-UX you are running by executing the +command `uname -r'. If you are indeed running HP-UX 8.02 on a 1.1 +machine and using the HP assembler then configure GCC with +"hp700-hpux8.02". Installing GNU CC on the Sun -============================= +============================ + + On Solaris (version 2.1), do not use the linker or other tools in +`/usr/ucb' to build GNU CC. Use `/usr/ccs/bin'. Make sure the environment variable `FLOAT_OPTION' is not set when you compile `libgcc.a'. If this option were set to `f68881' when @@ -800,9 +828,8 @@ it by using the following command to com make CC="TERMCAP=x OBJS=x LIBFUNCS=x STAGESTUFF=x cc" - Installing GNU CC on the 3b1 -============================= +============================ Installing GNU CC on the 3b1 is difficult if you do not already have GNU CC running, due to bugs in the installed C compiler. However, the @@ -829,9 +856,8 @@ following procedure might work. We are 8. Now you can compile GNU CC with itself and install it in the normal fashion. - Installing GNU CC on Unos -========================== +========================= Use `configure unos' for building on Unos. @@ -844,12 +870,12 @@ are installed: #!/bin/sh casm $* - The default Unos library is named `libunos.a' instead of `libc.a'. + The default Unos library is named `libunos.a' instead of `libc.a'. To allow GNU CC to function, either change all references to `-lc' in `gcc.c' to `-lunos' or link `/lib/libc.a' to `/lib/libunos.a'. When compiling GNU CC with the standard compiler, to overcome bugs in -the support of `alloca', do not use `-O' when making stage 2. Then use +the support of `alloca', do not use `-O' when making stage 2. Then use the stage 2 compiler with `-O' to make the stage 3 compiler. This compiler will have the same characteristics as the usual stage 2 compiler on other systems. Use it to make a stage 4 compiler and @@ -861,12 +887,11 @@ inform us of whether this works.) Unos uses memory segmentation instead of demand paging, so you will need a lot of memory. 5 Mb is barely enough if no other tasks are -running. If linking `cc1' fails, try putting the object files into a +running. If linking `cc1' fails, try putting the object files into a library and linking from that library. - Installing GNU CC on VMS -========================= +======================== The VMS version of GNU CC is distributed in a backup saveset containing both source code and precompiled binaries. @@ -909,7 +934,7 @@ perform the following steps: 1. Define the VMS logical name `GNU_GXX_INCLUDE' to point to the directory where the preprocessor will search for the C++ header - files. This can be done with the command: + files. This can be done with the command: $ assign /system /translation=concealed - disk:[gcc.gxx_include.] gnu_gxx_include @@ -933,12 +958,11 @@ the binaries and compare it with the sou whether this is so.) In this case, you should use the binaries you get to recompile the sources. If you must recompile, here is how: - 1. Execute the command procedure `vmsconfig.com' to copy files - `vax-vms.h', `xm-vax-vms.h', `vax.c' and `vax.md' to `tm.h', - `config.h', `aux-output.c', and `md.' respectively, and to create - files `tconfig.h' and `hconfig.h'. This procedure also creates - several linker option files used by `make-cc1.com' and a data file - used by `make-l2.com'. + 1. Execute the command procedure `vmsconfig.com' to set up the files + `tm.h', `config.h', `aux-output.c', and `md.', and to create files + `tconfig.h' and `hconfig.h'. This procedure also creates several + linker option files used by `make-cc1.com' and a data file used by + `make-l2.com'. $ @vmsconfig.com @@ -960,9 +984,9 @@ to recompile the sources. If you must r gnu_bison:[000000]bison $ install replace sys$common:[syslib]dcltables - 4. Type `@make-gcc' to recompile everything (alternatively, you may - submit the file `make-gcc.com' to a batch queue). If you wish to - build the GNU C++ compiler as well as the GNU CC compiler, you must + 4. Type `@make-gcc' to recompile everything (alternatively, submit + the file `make-gcc.com' to a batch queue). If you wish to build + the GNU C++ compiler as well as the GNU CC compiler, you must first edit `make-gcc.com' and follow the instructions that appear in the comments. @@ -970,7 +994,7 @@ to recompile the sources. If you must r compiled code will call to perform certain tasks, and these functions are defined in the file `libgcc2.c'. To compile this you should use the command procedure `make-l2.com', which will - generate the library `libgcc2.olb'. `libgcc2.olb' should be built + generate the library `libgcc2.olb'. `libgcc2.olb' should be built using the compiler built from the same distribution that `libgcc2.c' came from, and `make-gcc.com' will automatically do all of this for you. @@ -978,13 +1002,17 @@ to recompile the sources. If you must r To install the library, use the following commands: $ library gnu_cc:[000000]gcclib/delete=(new,eprintf) + $ library gnu_cc:[000000]gcclib/delete=L_* $ library libgcc2/extract=*/output=libgcc2.obj $ library gnu_cc:[000000]gcclib libgcc2.obj The first command simply removes old modules that will be replaced - with modules from libgcc2. If the VMS librarian complains about - those modules not being present, simply ignore the message and - continue on with the next command. + with modules from `libgcc2' under different module names. The + modules `new' and `eprintf' may not actually be present in your + `gcclib.olb'--if the VMS librarian complains about those modules + not being present, simply ignore the message and continue on with + the next command. The second command removes the modules that + came from the previous version of the library `libgcc2.c'. Whenever you update the compiler on your system, you should also update the library with the above procedure. @@ -999,20 +1027,20 @@ to recompile the sources. If you must r dua1:[gcc.source_dir.]/translation=concealed gcc_build $ set default gcc_build:[000000] - where `dua1:[gcc.source_dir]' contains the source code, and - `dua0:[gcc.build_dir]' is meant to contain all of the generated - object files and executables. Once you have done this, you can - proceed building GCC as described above. (Keep in mind that - `gcc_build' is a rooted logical name, and thus the device names in - each element of the search list must be an actual physical device - name rather than another rooted logical name). + where the directory `dua1:[gcc.source_dir]' contains the source + code, and the directory `dua0:[gcc.build_dir]' is meant to contain + all of the generated object files and executables. Once you have + done this, you can proceed building GCC as described above. (Keep + in mind that `gcc_build' is a rooted logical name, and thus the + device names in each element of the search list must be an actual + physical device name rather than another rooted logical name). 7. *If you are building GNU CC with a previous version of GNU CC, you also should check to see that you have the newest version of the assembler*. In particular, GNU CC version 2 treats global constant variables slightly differently from GNU CC version 1, and GAS version 1.38.1 does not have the patches required to work with GCC - version 2. If you use GAS 1.38.1, then `extern const' variables + version 2. If you use GAS 1.38.1, then `extern const' variables will not have the read-only bit set, and the linker will generate warning messages about mismatched psect attributes for these variables. These warning messages are merely a nuisance, and can @@ -1021,7 +1049,7 @@ to recompile the sources. If you must r If you are compiling with a version of GNU CC older than 1.33, specify `/DEFINE=("inline=")' as an option in all the compilations. This requires editing all the `gcc' commands in - `make-cc1.com'. (The older versions had problems supporting + `make-cc1.com'. (The older versions had problems supporting `inline'.) Once you have a working 1.33 or newer GNU CC, you can change this file back. @@ -1050,26 +1078,25 @@ to recompile the sources. If you must r Under previous versions of GNU CC, the generated code would occasionally give strange results when linked with the sharable -`VAXCRTL' library. Now this should work. +`VAXCRTL' library. Now this should work. Even with this version, however, GNU CC itself should not be linked with the sharable `VAXCRTL'. The version of `qsort' in `VAXCRTL' has a bug (known to be present in VMS versions V4.6 through V5.5) which causes the compiler to fail. - The executables that are generated by `make-cc1.com' and -`make-cccp.com' use the object library version of `VAXCRTL' in order to -make use of the `qsort' routine in `gcclib.olb'. If you wish to link -the compiler executables with the shareable image version of `VAXCRTL', -you should edit the file `tm.h' (created by `vmsconfig.com') to define -the macro `QSORT_WORKAROUND'. + The executables are generated by `make-cc1.com' and `make-cccp.com' +use the object library version of `VAXCRTL' in order to make use of the +`qsort' routine in `gcclib.olb'. If you wish to link the compiler +executables with the shareable image version of `VAXCRTL', you should +edit the file `tm.h' (created by `vmsconfig.com') to define the macro +`QSORT_WORKAROUND'. `QSORT_WORKAROUND' is always defined when GNU CC is compiled with VAX C, to avoid a problem in case `gcclib.olb' is not yet available. - Installing GNU CC on the WE32K -=============================== +============================== These computers are also known as the 3b2, 3b5, 3b20 and other similar names. (However, the 3b1 is actually a 68000; see *Note 3b1 @@ -1091,7 +1118,7 @@ compiler to compile `stmt.c'. Here is h The system's compiler produces bad code for some of the GNU CC optimization files. So you must build the stage 2 compiler without -optimization. Then build a stage 3 compiler with optimization. That +optimization. Then build a stage 3 compiler with optimization. That executable should work. Here are the necessary commands: make LANGUAGES=c CC=stage1/xgcc CFLAGS="-Bstage1/ -g" @@ -1101,16 +1128,16 @@ executable should work. Here are the ne You may need to raise the ULIMIT setting to build a C++ compiler, as the file `cc1plus' is larger than one megabyte. - Installing GNU CC on the MIPS -============================== +============================= - See *Note Installation:: about whether to use `--with-stabs' or not. + See *Note Installation:: about whether to use either of the options +`--with-stabs' or `--with-gnu-as'. The MIPS C compiler needs to be told to increase its table size for switch statements with the `-Wf,-XNg1500' option in order to compile `cp-parse.c'. If you use the `-O2' optimization option, you also need -to use `-Olimit 3000'. Both of these options are automatically +to use `-Olimit 3000'. Both of these options are automatically generated in the `Makefile' that the shell script `configure' builds. If you override the `CC' make variable and use the MIPS compilers, you may need to add `-Wf,-XNg1500 -Olimit 3000'. @@ -1151,3 +1178,90 @@ following configurations: OSF/rose object file format instead of ECOFF. Normally, you would not select this configuration. + On Irix version 4.0.5F, and perhaps on some other versions as well, +there is an assembler bug that reorders instructions incorrectly. To +work around it, specify the target configuration `mips-sgi-irix4loser'. +This configuration inhibits assembler optimization. + + You can turn off assembler optimization in a compiler configured with +target `mips-sgi-irix4' using the `-noasmopt' option. This compiler +option passes the option `-O0' to the assembler, to inhibit reordering. + + The `-noasmopt' option can be useful for testing whether a problem +is due to erroneous assembler reordering. Even if a problem does not go +away with `-noasmopt', it may still be due to assembler +reordering--perhaps GNU CC itself was miscompiled as a result. + + We know this is inconvenient, but it's the best that can be done at +the last minute. + +`collect2' +========== + + Many target systems do not have support in the assembler and linker +for "constructors"--initialization functions to be called before the +official "start" of `main'. On such systems, GNU CC uses a utility +called `collect2' to arrange to call these functions at start time. + + The program `collect2' works by linking the program once and looking +through the linker output file for symbols with particular names +indicating they are constructor functions. If it finds any, it creates +a new temporary `.c' file containing a table of them, compiles it, and +links the program a second time including that file. + + The actual calls to the constructors are carried out by a subroutine +called `__main', which is called (automatically) at the beginning of +the body of `main' (provided `main' was compiled with GNU CC). + + The program `collect2' is installed as `ld' in the directory where +the passes of the compiler are installed. When `collect2' needs to +find the *real* `ld', it tries the following file names: + + * `gld' in the directories listed in the compiler's search + directories. + + * `gld' in the directories listed in the environment variable `PATH'. + + * `real-ld' in the compiler's search directories. + + * `real-ld' in `PATH'. + + * `ld' in `PATH'. + + "The compiler's search directories" means all the directories where +`gcc' searches for passes of the compiler. This includes directories +that you specify with `-B'. + + Cross compilers search a little differently: + + * `gld' in the compiler's search directories. + + * `TARGET-gld' in `PATH'. + + * `real-ld' in the compiler's search directories. + + * `TARGET-real-ld' in `PATH'. + + * `TARGET-ld' in `PATH'. + + `collect2' does not search for `ld' using the compiler's search +directories, because if it did, it would find itself--not the real +`ld'--and this could lead to infinite recursion. However, the +directory where `collect2' is installed might happen to be in `PATH'. +That could lead `collect2' to invoke itself anyway. when looking for +`ld'. + + To prevent this, `collect2' explicitly avoids running `ld' using the +file name under which `collect2' itself was invoked. In fact, it +remembers up to two such names--in case one copy of `collect2' finds +another copy (or version) of `collect2' installed as `ld' in a second +place in the search path. + + If two file names to avoid are not sufficient, you may still +encounter an infinite recursion of `collect2' processes. When this +happens. check all the files installed as `ld' in any of the +directories searched, and straighten out the situation. + + (In a future version, we will probably change `collect2' to avoid +any reinvocation of a file from which any parent `collect2' was run.) +