--- gcc/config/pa/pa.md	2018/04/24 18:23:31	1.1.1.3
+++ gcc/config/pa/pa.md	2018/04/24 18:31:13	1.1.1.4
@@ -1,5 +1,5 @@
 ;;- Machine description for HP PA-RISC architecture for GNU C compiler
-;;   Copyright (C) 1992 Free Software Foundation, Inc.
+;;   Copyright (C) 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
 ;;   Contributed by the Center for Software Science at the University
 ;;   of Utah.
 
@@ -17,7 +17,8 @@
 
 ;; You should have received a copy of the GNU General Public License
 ;; along with GNU CC; see the file COPYING.  If not, write to
-;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+;; the Free Software Foundation, 59 Temple Place - Suite 330,
+;; Boston, MA 02111-1307, USA.
 
 ;; This gcc Version 2 machine description is inspired by sparc.md and
 ;; mips.md.
@@ -30,9 +31,16 @@
 ;; type "binary" insns have two input operands (1,2) and one output (0)
 
 (define_attr "type"
-  "move,unary,binary,compare,load,store,uncond_branch,branch,cbranch,fbranch,call,dyncall,fpload,fpstore,fpalu,fpcc,fpmul,fpdivsgl,fpdivdbl,fpsqrtsgl,fpsqrtdbl,multi,misc,milli"
+  "move,unary,binary,shift,nullshift,compare,load,store,uncond_branch,branch,cbranch,fbranch,call,dyncall,fpload,fpstore,fpalu,fpcc,fpmulsgl,fpmuldbl,fpdivsgl,fpdivdbl,fpsqrtsgl,fpsqrtdbl,multi,milli"
   (const_string "binary"))
 
+;; Processor type (for scheduling, not code generation) -- this attribute
+;; must exactly match the processor_type enumeration in pa.h.
+;;
+;; FIXME: Add 800 scheduling for completeness?
+
+(define_attr "cpu" "700,7100,7100LC" (const (symbol_ref "pa_cpu_attr")))
+
 ;; Length (in # of insns).
 (define_attr "length" ""
   (cond [(eq_attr "type" "load,fpload")
@@ -43,11 +51,11 @@
 	 (if_then_else (match_operand 0 "symbolic_memory_operand" "")
 		       (const_int 8) (const_int 4))
 
-	 (eq_attr "type" "binary")
+	 (eq_attr "type" "binary,shift,nullshift")
 	 (if_then_else (match_operand 2 "arith_operand" "")
 		       (const_int 4) (const_int 12))
 
-	 (eq_attr "type" "move,unary")
+	 (eq_attr "type" "move,unary,shift,nullshift")
 	 (if_then_else (match_operand 1 "arith_operand" "")
 		       (const_int 4) (const_int 8))]
 
@@ -69,7 +77,7 @@
 ;; Disallow instructions which use the FPU since they will tie up the FPU
 ;; even if the instruction is nullified.
 (define_attr "in_nullified_branch_delay" "false,true"
-  (if_then_else (and (eq_attr "type" "!uncond_branch,branch,cbranch,fbranch,call,dyncall,multi,milli,fpcc,fpalu,fpmul,fpdivsgl,fpdivdbl,fpsqrtsgl,fpsqrtdbl")
+  (if_then_else (and (eq_attr "type" "!uncond_branch,branch,cbranch,fbranch,call,dyncall,multi,milli,fpcc,fpalu,fpmulsgl,fpmuldbl,fpdivsgl,fpdivdbl,fpsqrtsgl,fpsqrtdbl")
 		     (eq_attr "length" "4"))
 		(const_string "true")
 		(const_string "false")))
@@ -93,10 +101,11 @@
   [(eq_attr "in_call_delay" "true") (nil) (nil)])
 
 ;; millicode call delay slot description.  Note it disallows delay slot
-;; when TARGET_LONG_CALLS is true.
+;; when TARGET_PORTABLE_RUNTIME or TARGET_MILLICODE_LONG_CALLS is true.
 (define_delay (eq_attr "type" "milli")
   [(and (eq_attr "in_call_delay" "true")
-	(eq (symbol_ref "TARGET_LONG_CALLS") (const_int 0)))
+	(and (eq (symbol_ref "TARGET_PORTABLE_RUNTIME") (const_int 0))
+	     (eq (symbol_ref "TARGET_MILLICODE_LONG_CALLS") (const_int 0))))
    (nil) (nil)])
 
 ;; Unconditional branch, return and other similar instructions.
@@ -121,8 +130,8 @@
    (and (eq_attr "in_nullified_branch_delay" "true")
 	(attr_flag "backward"))])
 
-;; Function units of the HPPA. The following data is for the "Snake"
-;; (Mustang CPU + Timex FPU) because that's what I have the docs for.
+;; Function units of the HPPA. The following data is for the 700 CPUs
+;; (Mustang CPU + Timex FPU aka PA-89) because that's what I have the docs for.
 ;; Scheduling instructions for PA-83 machines according to the Snake
 ;; constraints shouldn't hurt.
 
@@ -134,19 +143,23 @@
 ;; be specified.)
 
 ;; (define_function_unit "alu" 1 0
-;;  (eq_attr "type" "unary,binary,move,address") 1 0)
+;;  (and (eq_attr "type" "unary,shift,nullshift,binary,move,address")
+;;	 (eq_attr "cpu" "700"))
+;;  1 0)
 
 
 ;; Memory. Disregarding Cache misses, the Mustang memory times are:
-;; load: 2
+;; load: 2, fpload: 3
 ;; store, fpstore: 3, no D-cache operations should be scheduled.
-;; fpload: 3 (really 2 for flops, but I don't think we can specify that).
 
-(define_function_unit "memory" 1 0 (eq_attr "type" "load") 2 0)
-(define_function_unit "memory" 1 0 (eq_attr "type" "store,fpstore") 3 3)
-(define_function_unit "memory" 1 0 (eq_attr "type" "fpload") 2 0)
+(define_function_unit "pa700memory" 1 0
+  (and (eq_attr "type" "load,fpload")
+       (eq_attr "cpu" "700")) 2 0)
+(define_function_unit "pa700memory" 1 0 
+  (and (eq_attr "type" "store,fpstore")
+       (eq_attr "cpu" "700")) 3 3)
 
-;; The Timex has two floating-point units: ALU, and MUL/DIV/SQRT unit.
+;; The Timex (aka 700) has two floating-point units: ALU, and MUL/DIV/SQRT.
 ;; Timings:
 ;; Instruction	Time	Unit	Minimum Distance (unit contention)
 ;; fcpy		3	ALU	2
@@ -165,13 +178,160 @@
 ;; fsqrt,sgl	14	MPY	14
 ;; fsqrt,dbl	18	MPY	18
 
-(define_function_unit "fp_alu" 1 0 (eq_attr "type" "fpcc") 4 2)
-(define_function_unit "fp_alu" 1 0 (eq_attr "type" "fpalu") 3 2)
-(define_function_unit "fp_mpy" 1 0 (eq_attr "type" "fpmul") 3 2)
-(define_function_unit "fp_mpy" 1 0 (eq_attr "type" "fpdivsgl") 10 10)
-(define_function_unit "fp_mpy" 1 0 (eq_attr "type" "fpdivdbl") 12 12)
-(define_function_unit "fp_mpy" 1 0 (eq_attr "type" "fpsqrtsgl") 14 14)
-(define_function_unit "fp_mpy" 1 0 (eq_attr "type" "fpsqrtdbl") 18 18)
+(define_function_unit "pa700fp_alu" 1 0
+  (and (eq_attr "type" "fpcc")
+       (eq_attr "cpu" "700")) 4 2)
+(define_function_unit "pa700fp_alu" 1 0
+  (and (eq_attr "type" "fpalu")
+       (eq_attr "cpu" "700")) 3 2)
+(define_function_unit "pa700fp_mpy" 1 0
+  (and (eq_attr "type" "fpmulsgl,fpmuldbl")
+       (eq_attr "cpu" "700")) 3 2)
+(define_function_unit "pa700fp_mpy" 1 0
+  (and (eq_attr "type" "fpdivsgl")
+       (eq_attr "cpu" "700")) 10 10)
+(define_function_unit "pa700fp_mpy" 1 0
+  (and (eq_attr "type" "fpdivdbl")
+       (eq_attr "cpu" "700")) 12 12)
+(define_function_unit "pa700fp_mpy" 1 0
+  (and (eq_attr "type" "fpsqrtsgl")
+       (eq_attr "cpu" "700")) 14 14)
+(define_function_unit "pa700fp_mpy" 1 0
+  (and (eq_attr "type" "fpsqrtdbl")
+       (eq_attr "cpu" "700")) 18 18)
+
+;; Function units for the 7100 and 7150.  The 7100/7150 can dual-issue
+;; floating point computations with non-floating point computations (fp loads
+;; and stores are not fp computations).
+;;
+;; As with the alpha we multiply the ready delay by two to encourage
+;; schedules which will allow the 7100/7150 to dual issue as many instructions
+;; as possible.
+
+;; Memory. Disregarding Cache misses, memory loads take two cycles; stores also
+;; take two cycles, during which no Dcache operations should be scheduled.
+;; Any special cases are handled in pa_adjust_cost.  The 7100, 7150 and 7100LC
+;; all have the same memory characteristics if one disregards cache misses.
+(define_function_unit "pa7100memory" 1 0
+  (and (eq_attr "type" "load,fpload")
+       (eq_attr "cpu" "7100,7100LC")) 4 0)
+(define_function_unit "pa7100memory" 1 0 
+  (and (eq_attr "type" "store,fpstore")
+       (eq_attr "cpu" "7100,7100LC")) 4 4)
+
+;; The 7100/7150 has three floating-point units: ALU, MUL, and DIV.
+;; Timings:
+;; Instruction	Time	Unit	Minimum Distance (unit contention)
+;; fcpy		2	ALU	1
+;; fabs		2	ALU	1
+;; fadd		2	ALU	1
+;; fsub		2	ALU	1
+;; fcmp		2	ALU	1
+;; fcnv		2	ALU	1
+;; fmpyadd	2	ALU,MPY	1
+;; fmpysub	2	ALU,MPY 1
+;; fmpycfxt	2	ALU,MPY 1
+;; fmpy		2	MPY	1
+;; fmpyi	2	MPY	1
+;; fdiv,sgl	8	DIV	8
+;; fdiv,dbl	15	DIV	15
+;; fsqrt,sgl	8	DIV	8
+;; fsqrt,dbl	15	DIV	15
+
+(define_function_unit "pa7100fp_alu" 1 0
+  (and (eq_attr "type" "fpcc,fpalu")
+       (eq_attr "cpu" "7100")) 4 2)
+(define_function_unit "pa7100fp_mpy" 1 0
+  (and (eq_attr "type" "fpmulsgl,fpmuldbl")
+       (eq_attr "cpu" "7100")) 4 2)
+(define_function_unit "pa7100fp_div" 1 0
+  (and (eq_attr "type" "fpdivsgl,fpsqrtsgl")
+       (eq_attr "cpu" "7100")) 16 16)
+(define_function_unit "pa7100fp_div" 1 0
+  (and (eq_attr "type" "fpdivdbl,fpsqrtdbl")
+       (eq_attr "cpu" "7100")) 30 30)
+
+;; To encourage dual issue we define function units corresponding to
+;; the instructions which can be dual issued.    This is a rather crude
+;; approximation, the "pa7100nonflop" test in particular could be refined.
+(define_function_unit "pa7100flop" 1 1
+  (and
+    (eq_attr "type" "fpcc,fpalu,fpmulsgl,fpmuldbl,fpdivsgl,fpsqrtsgl,fpdivdbl,fpsqrtdbl")
+    (eq_attr "cpu" "7100,7100LC")) 2 2)
+
+(define_function_unit "pa7100nonflop" 1 1
+  (and
+    (eq_attr "type" "!fpcc,fpalu,fpmulsgl,fpmuldbl,fpdivsgl,fpsqrtsgl,fpdivdbl,fpsqrtdbl")
+    (eq_attr "cpu" "7100")) 2 2)
+
+
+;; Memory subsystem works just like 7100/7150 (except for cache miss times which
+;; we don't model here).  
+
+;; The 7100LC has three floating-point units: ALU, MUL, and DIV.
+;; Note divides and sqrt flops lock the cpu until the flop is
+;; finished.  fmpy and xmpyu (fmpyi) lock the cpu for one cycle.
+;; There's no way to avoid the penalty.
+;; Timings:
+;; Instruction	Time	Unit	Minimum Distance (unit contention)
+;; fcpy		2	ALU	1
+;; fabs		2	ALU	1
+;; fadd		2	ALU	1
+;; fsub		2	ALU	1
+;; fcmp		2	ALU	1
+;; fcnv		2	ALU	1
+;; fmpyadd,sgl	2	ALU,MPY	1
+;; fmpyadd,dbl	3	ALU,MPY	2
+;; fmpysub,sgl	2	ALU,MPY 1
+;; fmpysub,dbl	3	ALU,MPY 2
+;; fmpycfxt,sgl	2	ALU,MPY 1
+;; fmpycfxt,dbl	3	ALU,MPY 2
+;; fmpy,sgl	2	MPY	1
+;; fmpy,dbl	3	MPY	2
+;; fmpyi	3	MPY	2
+;; fdiv,sgl	8	DIV	8
+;; fdiv,dbl	15	DIV	15
+;; fsqrt,sgl	8	DIV	8
+;; fsqrt,dbl	15	DIV	15
+
+(define_function_unit "pa7100LCfp_alu" 1 0
+  (and (eq_attr "type" "fpcc,fpalu")
+       (eq_attr "cpu" "7100LC")) 4 2)
+(define_function_unit "pa7100LCfp_mpy" 1 0
+  (and (eq_attr "type" "fpmulsgl")
+       (eq_attr "cpu" "7100LC")) 4 2)
+(define_function_unit "pa7100LCfp_mpy" 1 0
+  (and (eq_attr "type" "fpmuldbl")
+       (eq_attr "cpu" "7100LC")) 6 4)
+(define_function_unit "pa7100LCfp_div" 1 0
+  (and (eq_attr "type" "fpdivsgl,fpsqrtsgl")
+       (eq_attr "cpu" "7100LC")) 16 16)
+(define_function_unit "pa7100LCfp_div" 1 0
+  (and (eq_attr "type" "fpdivdbl,fpsqrtdbl")
+       (eq_attr "cpu" "7100LC")) 30 30)
+
+;; Define the various functional units for dual-issue.
+;; The 7100LC shares the generic "flop" unit specification with the 7100/7150.
+
+;; The 7100LC has two basic integer which allow dual issue of most integer
+;; instructions.  This needs further refinement to deal with the nullify,
+;; carry/borrow possible the ldw/ldw stw/stw special dual issue cases, and
+;; of course it needs to know about hte 2nd alu.
+(define_function_unit "pa7100LCnonflop" 1 1
+  (and
+    (eq_attr "type" "!fpcc,fpalu,fpmulsgl,fpmuldbl,fpdivsgl,fpsqrtsgl,fpdivdbl,fpsqrtdbl,load,fpload,store,fpstore,shift,nullshift")
+    (eq_attr "cpu" "7100LC")) 2 2)
+
+(define_function_unit "pa7100LCshifter" 1 1
+  (and
+    (eq_attr "type" "shift,nullshift")
+    (eq_attr "cpu" "7100LC")) 2 2)
+
+(define_function_unit "pa7100LCmem" 1 1
+  (and
+    (eq_attr "type" "load,fpload,store,fpstore")
+    (eq_attr "cpu" "7100LC")) 2 2)
+
 
 ;; Compare instructions.
 ;; This controls RTL generation and register allocation.
@@ -198,7 +358,7 @@
   [(set (reg:CCFP 0)
 	(compare:CCFP (match_operand:SF 0 "reg_or_0_operand" "")
 		      (match_operand:SF 1 "reg_or_0_operand" "")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "
 {
   hppa_compare_op0 = operands[0];
@@ -211,7 +371,7 @@
   [(set (reg:CCFP 0)
       (compare:CCFP (match_operand:DF 0 "reg_or_0_operand" "")
                     (match_operand:DF 1 "reg_or_0_operand" "")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "
 {
   hppa_compare_op0 = operands[0];
@@ -225,18 +385,20 @@
 	(match_operator:CCFP 2 "comparison_operator"
 			     [(match_operand:SF 0 "reg_or_0_operand" "fG")
 			      (match_operand:SF 1 "reg_or_0_operand" "fG")]))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fcmp,sgl,%Y2 %r0,%r1"
-  [(set_attr "type" "fpcc")])
+  [(set_attr "length" "4")
+   (set_attr "type" "fpcc")])
 
 (define_insn ""
   [(set (reg:CCFP 0)
 	(match_operator:CCFP 2 "comparison_operator"
 			     [(match_operand:DF 0 "reg_or_0_operand" "fG")
 			      (match_operand:DF 1 "reg_or_0_operand" "fG")]))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fcmp,dbl,%Y2 %r0,%r1"
-  [(set_attr "type" "fpcc")])
+  [(set_attr "length" "4")
+   (set_attr "type" "fpcc")])
 
 ;; scc insns.
 
@@ -402,7 +564,7 @@
   ""
   "com%I2clr,%S3 %2,%1,0\;com%I5clr,%B6 %5,%4,%0\;ldi 1,%0"
   [(set_attr "type" "binary")
-   (set_attr "length" "8")])
+   (set_attr "length" "12")])
 
 ;; Combiner patterns for common operations performed with the output
 ;; from an scc insn (negscc and incscc).
@@ -601,6 +763,29 @@
  (set_attr "length" "8,8")])
 ;;; Experimental conditional move patterns
 
+(define_expand "movsicc"
+  [(set (match_operand:SI 0 "register_operand" "")
+	(if_then_else:SI
+	 (match_operator 1 "comparison_operator"
+	    [(match_dup 4)
+	     (match_dup 5)])
+	 (match_operand:SI 2 "reg_or_cint_move_operand" "")
+	 (match_operand:SI 3 "reg_or_cint_move_operand" "")))]
+  ""
+  "
+{
+  enum rtx_code code = GET_CODE (operands[1]);
+
+  if (hppa_branch_type != CMP_SI)
+    FAIL;
+
+  /* operands[1] is currently the result of compare_from_rtx.  We want to
+     emit a compare of the original operands.  */
+  operands[1] = gen_rtx (code, SImode, hppa_compare_op0, hppa_compare_op1);
+  operands[4] = hppa_compare_op0;
+  operands[5] = hppa_compare_op1;
+}")
+
 ; We need the first constraint alternative in order to avoid
 ; earlyclobbers on all other alternatives.
 (define_insn ""
@@ -618,7 +803,7 @@
    com%I4clr,%B5 %4,%3,%0\;ldi %1,%0
    com%I4clr,%B5 %4,%3,%0\;ldil L'%1,%0
    com%I4clr,%B5 %4,%3,%0\;zdepi %Z1,%0"
-  [(set_attr "type" "multi,multi,multi,multi,multi")
+  [(set_attr "type" "multi,multi,multi,multi,nullshift")
    (set_attr "length" "8,8,8,8,8")])
 
 (define_insn ""
@@ -639,7 +824,7 @@
    com%I4clr,%B5 %4,%3,0\;ldi %1,%0
    com%I4clr,%B5 %4,%3,0\;ldil L'%1,%0
    com%I4clr,%B5 %4,%3,0\;zdepi %Z1,%0"
-  [(set_attr "type" "multi,multi,multi,multi,multi,multi,multi,multi")
+  [(set_attr "type" "multi,multi,multi,nullshift,multi,multi,multi,nullshift")
    (set_attr "length" "8,8,8,8,8,8,8,8")])
 
 ;; Conditional Branches
@@ -867,19 +1052,39 @@
 			      (const_int 1)
 			      (match_operand:SI 1 "uint5_operand" ""))
 	     (const_int 0))
-	 (match_operand 2 "pc_or_label_operand" "")
-	 (match_operand 3 "pc_or_label_operand" "")))]
+	 (label_ref (match_operand 2 "" ""))
+	 (pc)))]
   ""
   "*
 {
   return output_bb (operands, INSN_ANNULLED_BRANCH_P (insn),
-			 get_attr_length (insn),
-			 (operands[3] != pc_rtx),
-			 insn, 0);
+			 get_attr_length (insn), 0, insn, 0);
 }"
 [(set_attr "type" "cbranch")
  (set (attr "length")
-    (if_then_else (lt (abs (minus (match_dup 0) (plus (pc) (const_int 8))))
+    (if_then_else (lt (abs (minus (match_dup 2) (plus (pc) (const_int 8))))
+		      (const_int 8188))
+           (const_int 4)
+	   (const_int 8)))])
+
+(define_insn ""
+  [(set (pc)
+	(if_then_else
+	 (ne (zero_extract:SI (match_operand:SI 0 "register_operand" "r")
+			      (const_int 1)
+			      (match_operand:SI 1 "uint5_operand" ""))
+	     (const_int 0))
+	 (pc)
+	 (label_ref (match_operand 2 "" ""))))]
+  ""
+  "*
+{
+  return output_bb (operands, INSN_ANNULLED_BRANCH_P (insn),
+			 get_attr_length (insn), 1, insn, 0);
+}"
+[(set_attr "type" "cbranch")
+ (set (attr "length")
+    (if_then_else (lt (abs (minus (match_dup 2) (plus (pc) (const_int 8))))
 		      (const_int 8188))
            (const_int 4)
 	   (const_int 8)))])
@@ -891,19 +1096,39 @@
 			      (const_int 1)
 			      (match_operand:SI 1 "uint5_operand" ""))
 	     (const_int 0))
-	 (match_operand 2 "pc_or_label_operand" "")
-	 (match_operand 3 "pc_or_label_operand" "")))]
+	 (label_ref (match_operand 2 "" ""))
+	 (pc)))]
   ""
   "*
 {
   return output_bb (operands, INSN_ANNULLED_BRANCH_P (insn),
-			 get_attr_length (insn),
-			 (operands[3] != pc_rtx),
-			 insn, 1);
+			 get_attr_length (insn), 0, insn, 1);
 }"
 [(set_attr "type" "cbranch")
  (set (attr "length")
-    (if_then_else (lt (abs (minus (match_dup 0) (plus (pc) (const_int 8))))
+    (if_then_else (lt (abs (minus (match_dup 2) (plus (pc) (const_int 8))))
+		      (const_int 8188))
+           (const_int 4)
+	   (const_int 8)))])
+
+(define_insn ""
+  [(set (pc)
+	(if_then_else
+	 (eq (zero_extract:SI (match_operand:SI 0 "register_operand" "r")
+			      (const_int 1)
+			      (match_operand:SI 1 "uint5_operand" ""))
+	     (const_int 0))
+	 (pc)
+	 (label_ref (match_operand 2 "" ""))))]
+  ""
+  "*
+{
+  return output_bb (operands, INSN_ANNULLED_BRANCH_P (insn),
+			 get_attr_length (insn), 1, insn, 1);
+}"
+[(set_attr "type" "cbranch")
+ (set (attr "length")
+    (if_then_else (lt (abs (minus (match_dup 2) (plus (pc) (const_int 8))))
 		      (const_int 8188))
            (const_int 4)
 	   (const_int 8)))])
@@ -913,7 +1138,7 @@
   [(set (pc) (if_then_else (ne (reg:CCFP 0) (const_int 0))
 			   (label_ref (match_operand 0 "" ""))
 			   (pc)))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "*
 {
   if (INSN_ANNULLED_BRANCH_P (insn))
@@ -928,7 +1153,7 @@
   [(set (pc) (if_then_else (ne (reg:CCFP 0) (const_int 0))
 			   (pc)
 			   (label_ref (match_operand 0 "" ""))))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "*
 {
   if (INSN_ANNULLED_BRANCH_P (insn))
@@ -1000,8 +1225,9 @@
 				"=r,r,r,r,r,Q,*q,!f,f,*T")
 	(match_operand:SI 1 "move_operand"
 				"r,J,N,K,Q,rM,rM,!fM,*T,f"))]
-  "register_operand (operands[0], SImode)
-   || reg_or_0_operand (operands[1], SImode)"
+  "(register_operand (operands[0], SImode)
+    || reg_or_0_operand (operands[1], SImode))
+   && ! TARGET_SOFT_FLOAT"
   "@
    copy %1,%0
    ldi %1,%0
@@ -1013,9 +1239,28 @@
    fcpy,sgl %r1,%0
    fldws%F1 %1,%0
    fstws%F0 %1,%0"
-  [(set_attr "type" "move,move,move,move,load,store,move,fpalu,fpload,fpstore")
+  [(set_attr "type" "move,move,move,shift,load,store,move,fpalu,fpload,fpstore")
    (set_attr "length" "4,4,4,4,4,4,4,4,4,4")])
 
+(define_insn ""
+  [(set (match_operand:SI 0 "reg_or_nonsymb_mem_operand"
+				"=r,r,r,r,r,Q,*q")
+	(match_operand:SI 1 "move_operand"
+				"r,J,N,K,Q,rM,rM"))]
+  "(register_operand (operands[0], SImode)
+    || reg_or_0_operand (operands[1], SImode))
+   && TARGET_SOFT_FLOAT"
+  "@
+   copy %1,%0
+   ldi %1,%0
+   ldil L'%1,%0
+   zdepi %Z1,%0
+   ldw%M1 %1,%0
+   stw%M0 %r1,%0
+   mtsar %r1"
+  [(set_attr "type" "move,move,move,move,load,store,move")
+   (set_attr "length" "4,4,4,4,4,4,4")])
+
 ;; Load indexed.  We don't use unscaled modes since they can't be used
 ;; unless we can tell which of the registers is the base and which is
 ;; the index, due to PA's idea of segment selection using the top bits
@@ -1038,7 +1283,7 @@
 ;; has constraints allowing a register.  I don't know how this works,
 ;; but it somehow makes sure that out-of-range constants are placed
 ;; in a register which somehow magically is a "const_int_operand".
-;; (this was stolen from alpha.md, I'm not going to try and change it.
+;; (this was stolen from alpha.md, I'm not going to try and change it.)
 (define_insn ""
   [(set (match_operand:SI 0 "register_operand" "&=r")
 	(mem:SI (plus:SI (plus:SI
@@ -1124,10 +1369,11 @@
    (set_attr "length" "4")])
 
 ;; For pic
-(define_insn ""
-  [(set (match_operand:SI 0 "register_operand" "=r")
-	(match_operand:SI 1 "pic_operand" "i"))
-   (clobber (match_scratch:SI 2 "=a"))]
+;; Note since this pattern can be created at reload time (via movsi), all
+;; the same rules for movsi apply here.  (no new pseudos, no temporaries).
+(define_insn "pic_load_label"
+  [(set (match_operand:SI 0 "register_operand" "=a")
+	(match_operand:SI 1 "pic_label_operand" ""))]
   ""
   "*
 {
@@ -1138,14 +1384,60 @@
   xoperands[0] = operands[0];
   xoperands[1] = operands[1];
   xoperands[2] = label_rtx;
-  output_asm_insn (\"bl .+8,%0\;addil L'%1-%2,%0\", xoperands);
-  ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, \"L\", CODE_LABEL_NUMBER (label_rtx));
-  output_asm_insn (\"ldo R'%1-%2(1),%0\", xoperands);
+  output_asm_insn (\"bl .+8,%0\", xoperands);
+  output_asm_insn (\"depi 0,31,2,%0\", xoperands);
+  ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, \"L\",
+			     CODE_LABEL_NUMBER (label_rtx));
+
+  /* If we're trying to load the address of a label that happens to be
+     close, then we can use a shorter sequence.  */
+  if (GET_CODE (operands[1]) == LABEL_REF
+      && insn_addresses
+      && abs (insn_addresses[INSN_UID (XEXP (operands[1], 0))]
+	        - insn_current_address) < 8100)
+    {
+      /* Prefixing with R% here is wrong, it extracts just 11 bits and is
+	 always non-negative.  */
+      output_asm_insn (\"ldo %1-%2(%0),%0\", xoperands);
+    }
+  else
+    {
+      output_asm_insn (\"addil L%%%1-%2,%0\", xoperands);
+      output_asm_insn (\"ldo R%%%1-%2(%0),%0\", xoperands);
+    }
   return \"\";
-  }
-"
+}"
   [(set_attr "type" "multi")
-   (set_attr "length" "12")])
+   (set_attr "length" "16")])		; 12 or 16
+
+(define_insn "pic2_highpart"
+  [(set (match_operand:SI 0 "register_operand" "=a")
+	(plus:SI (match_operand:SI 1 "register_operand" "r")
+		 (high:SI (match_operand 2 "" ""))))]
+  "symbolic_operand (operands[2], Pmode)
+   && ! function_label_operand (operands[2])
+   && flag_pic == 2"
+  "addil LT'%G2,%1"
+  [(set_attr "type" "binary")
+   (set_attr "length" "4")])
+
+; We need this to make sure CSE doesn't simplify a memory load with a
+; symbolic address, whose content it think it knows.  For PIC, what CSE
+; think is the real value will be the address of that value.
+(define_insn "pic2_lo_sum"
+  [(set (match_operand:SI 0 "register_operand" "=r")
+	(mem:SI (lo_sum:SI (match_operand:SI 1 "register_operand" "r")
+			   (unspec:SI [(match_operand:SI 2 "symbolic_operand" "")] 0))))]
+  ""
+  "*
+{
+  if (flag_pic != 2)
+    abort ();
+  return \"ldw RT'%G2(%1),%0\";
+}"
+  [(set_attr "type" "load")
+   (set_attr "length" "4")])
+
 
 ;; Always use addil rather than ldil;add sequences.  This allows the
 ;; HP linker to eliminate the dp relocation if the symbolic operand
@@ -1155,9 +1447,9 @@
 	(high:SI (match_operand 1 "" "")))]
   "symbolic_operand (operands[1], Pmode)
    && ! function_label_operand (operands[1])
-   && ! read_only_operand (operands[1])"
-  "@
-   addil L'%G1,%%r27"
+   && ! read_only_operand (operands[1])
+   && ! flag_pic"
+  "addil LR'%G1,%%r27"
   [(set_attr "type" "binary")
    (set_attr "length" "4")])
 
@@ -1199,8 +1491,15 @@
 (define_insn ""
   [(set (match_operand:SI 0 "register_operand" "=r")
 	(high:SI (match_operand 1 "" "")))]
-  "check_pic (1) && !is_function_label_plus_const (operands[1])"
-  "ldil L'%G1,%0"
+  "(!flag_pic || !symbolic_operand (operands[1]), Pmode)
+    && !is_function_label_plus_const (operands[1])"
+  "*
+{
+  if (symbolic_operand (operands[1], Pmode))
+    return \"ldil LR'%G1,%0\";
+  else
+    return \"ldil L'%G1,%0\";
+}"
   [(set_attr "type" "move")
    (set_attr "length" "4")])
 
@@ -1216,7 +1515,8 @@
 		   (match_operand:SI 2 "function_label_operand" "")))]
   "!TARGET_PORTABLE_RUNTIME"
   "ldo RP'%G2(%1),%0"
-  [(set_attr "length" "4")])
+  [(set_attr "type" "move")
+   (set_attr "length" "4")])
 
 ;; This version is used only for the portable runtime conventions model
 ;; (it does not use/support plabels)
@@ -1226,15 +1526,25 @@
 		   (match_operand:SI 2 "function_label_operand" "")))]
   "TARGET_PORTABLE_RUNTIME"
   "ldo R'%G2(%1),%0"
-  [(set_attr "length" "4")])
+  [(set_attr "type" "move")
+   (set_attr "length" "4")])
 
 (define_insn ""
   [(set (match_operand:SI 0 "register_operand" "=r")
 	(lo_sum:SI (match_operand:SI 1 "register_operand" "r")
 		   (match_operand:SI 2 "immediate_operand" "i")))]
   "!is_function_label_plus_const (operands[2])"
-  "ldo R'%G2(%1),%0"
-  [(set_attr "length" "4")])
+  "*
+{
+  if (flag_pic && symbolic_operand (operands[2], Pmode))
+    abort ();
+  else if (symbolic_operand (operands[2], Pmode))
+    return \"ldo RR'%G2(%1),%0\";
+  else
+    return \"ldo R'%G2(%1),%0\";
+}"
+  [(set_attr "type" "move")
+   (set_attr "length" "4")])
 
 ;; Now that a symbolic_address plus a constant is broken up early
 ;; in the compilation phase (for better CSE) we need a special
@@ -1245,7 +1555,7 @@
   [(set (match_operand:SI 0 "register_operand" "")
 	(match_operand:SI 1 "symbolic_operand" ""))
    (clobber (match_operand:SI 2 "register_operand" ""))]
-  ""
+  "! (flag_pic && pic_label_operand (operands[1], SImode))"
   [(set (match_dup 2) (high:SI (match_dup 1)))
    (set (match_dup 0) (lo_sum:SI (match_dup 2) (match_dup 1)))]
   "")
@@ -1274,7 +1584,7 @@
    sth%M0 %r1,%0
    mtsar %r1
    fcpy,sgl %r1,%0"
-  [(set_attr "type" "move,move,move,move,load,store,move,fpalu")
+  [(set_attr "type" "move,move,move,shift,load,store,move,fpalu")
    (set_attr "length" "4,4,4,4,4,4,4,4")])
 
 (define_insn ""
@@ -1337,8 +1647,8 @@
 
 (define_insn ""
   [(set (match_operand:HI 0 "register_operand" "=r")
-	(high:HI (match_operand 1 "" "")))]
-  "check_pic (1)"
+	(high:HI (match_operand 1 "const_int_operand" "")))]
+  ""
   "ldil L'%G1,%0"
   [(set_attr "type" "move")
    (set_attr "length" "4")])
@@ -1346,10 +1656,11 @@
 (define_insn ""
   [(set (match_operand:HI 0 "register_operand" "=r")
 	(lo_sum:HI (match_operand:HI 1 "register_operand" "r")
-		   (match_operand 2 "immediate_operand" "i")))]
+		   (match_operand 2 "const_int_operand" "")))]
   ""
   "ldo R'%G2(%1),%0"
-  [(set_attr "length" "4")])
+  [(set_attr "type" "move")
+   (set_attr "length" "4")])
 
 (define_expand "movqi"
   [(set (match_operand:QI 0 "general_operand" "")
@@ -1375,7 +1686,7 @@
    stb%M0 %r1,%0
    mtsar %r1
    fcpy,sgl %r1,%0"
-  [(set_attr "type" "move,move,move,move,load,store,move,fpalu")
+  [(set_attr "type" "move,move,move,shift,load,store,move,fpalu")
    (set_attr "length" "4,4,4,4,4,4,4,4")])
 
 (define_insn ""
@@ -1462,9 +1773,10 @@
 ;; to handle obscure reloading cases.
 (define_insn ""
   [(set (match_operand:DF 0 "general_operand" "=?r,f")
-	(match_operand:DF 1 "" "?E,m"))]
+	(match_operand:DF 1 "" "?F,m"))]
   "GET_CODE (operands[1]) == CONST_DOUBLE
-   && operands[1] != CONST0_RTX (DFmode)"
+   && operands[1] != CONST0_RTX (DFmode)
+   && ! TARGET_SOFT_FLOAT"
   "* return (which_alternative == 0 ? output_move_double (operands)
 				    : \" fldds%F1 %1,%0\");"
   [(set_attr "type" "move,fpload")
@@ -1518,8 +1830,9 @@
 			  "=f,*r,Q,?o,?Q,f,*&r,*&r")
 	(match_operand:DF 1 "reg_or_0_or_nonsymb_mem_operand"
 			  "fG,*rG,f,*r,*r,Q,o,Q"))]
-  "register_operand (operands[0], DFmode)
-   || reg_or_0_operand (operands[1], DFmode)"
+  "(register_operand (operands[0], DFmode)
+    || reg_or_0_operand (operands[1], DFmode))
+   && ! TARGET_SOFT_FLOAT"
   "*
 {
   if (FP_REG_P (operands[0]) || FP_REG_P (operands[1])
@@ -1531,11 +1844,26 @@
    (set_attr "length" "4,8,4,8,16,4,8,16")])
 
 (define_insn ""
+  [(set (match_operand:DF 0 "reg_or_nonsymb_mem_operand"
+			  "=r,?o,?Q,&r,&r")
+	(match_operand:DF 1 "reg_or_0_or_nonsymb_mem_operand"
+			  "rG,r,r,o,Q"))]
+  "(register_operand (operands[0], DFmode)
+    || reg_or_0_operand (operands[1], DFmode))
+   && TARGET_SOFT_FLOAT"
+  "*
+{
+  return output_move_double (operands);
+}"
+  [(set_attr "type" "move,store,store,load,load")
+   (set_attr "length" "8,8,16,8,16")])
+
+(define_insn ""
   [(set (match_operand:DF 0 "register_operand" "=f")
 	(mem:DF (plus:SI (mult:SI (match_operand:SI 1 "register_operand" "r")
 				  (const_int 8))
 			 (match_operand:SI 2 "register_operand" "r"))))]
-  "! TARGET_DISABLE_INDEXING"
+  "! TARGET_DISABLE_INDEXING && ! TARGET_SOFT_FLOAT"
   "flddx,s %1(0,%2),%0"
   [(set_attr "type" "fpload")
    (set_attr "length" "4")])
@@ -1558,7 +1886,7 @@
 			     (const_int 8))
 		    (match_operand:SI 2 "register_operand" "r"))
 		  (match_operand:SI 3 "const_int_operand" "rL"))))]
-  "! TARGET_DISABLE_INDEXING && reload_in_progress"
+  "! TARGET_DISABLE_INDEXING && ! TARGET_SOFT_FLOAT && reload_in_progress"
   "*
 {
   if (GET_CODE (operands[3]) == CONST_INT)
@@ -1574,7 +1902,7 @@
 				  (const_int 8))
 			 (match_operand:SI 2 "register_operand" "r")))
 	(match_operand:DF 0 "register_operand" "f"))]
-  "! TARGET_DISABLE_INDEXING"
+  "! TARGET_DISABLE_INDEXING && ! TARGET_SOFT_FLOAT"
   "fstdx,s %0,%1(0,%2)"
   [(set_attr "type" "fpstore")
    (set_attr "length" "4")])
@@ -1597,7 +1925,7 @@
 		     (match_operand:SI 2 "register_operand" "r"))
 		  (match_operand:SI 3 "const_int_operand" "rL")))
 	(match_operand:DF 0 "register_operand" "f"))]
-  "! TARGET_DISABLE_INDEXING && reload_in_progress"
+  "! TARGET_DISABLE_INDEXING && ! TARGET_SOFT_FLOAT && reload_in_progress"
   "*
 {
   if (GET_CODE (operands[3]) == CONST_INT)
@@ -1651,7 +1979,7 @@
 (define_insn ""
   [(set (match_operand:DI 0 "register_operand" "=r")
 	(high:DI (match_operand 1 "" "")))]
-  "check_pic (1)"
+  ""
   "*
 {
   rtx op0 = operands[0];
@@ -1672,11 +2000,11 @@
   else if (GET_CODE (op1) == CONST_DOUBLE)
     {
       operands[0] = operand_subword (op0, 1, 0, DImode);
-      operands[1] = gen_rtx (CONST_INT, VOIDmode, CONST_DOUBLE_LOW (op1));
+      operands[1] = GEN_INT (CONST_DOUBLE_LOW (op1));
       output_asm_insn (\"ldil L'%1,%0\", operands);
 
       operands[0] = operand_subword (op0, 0, 0, DImode);
-      operands[1] = gen_rtx (CONST_INT, VOIDmode, CONST_DOUBLE_HIGH (op1));
+      operands[1] = GEN_INT (CONST_DOUBLE_HIGH (op1));
       output_asm_insn (singlemove_string (operands), operands);
       return \"\";
     }
@@ -1693,8 +2021,9 @@
 			  "=r,o,Q,&r,&r,&r,f,f,*T")
 	(match_operand:DI 1 "general_operand"
 			  "rM,r,r,o,Q,i,fM,*T,f"))]
-  "register_operand (operands[0], DImode)
-   || reg_or_0_operand (operands[1], DImode)"
+  "(register_operand (operands[0], DImode)
+    || reg_or_0_operand (operands[1], DImode))
+   && ! TARGET_SOFT_FLOAT"
   "*
 {
   if (FP_REG_P (operands[0]) || FP_REG_P (operands[1])
@@ -1702,10 +2031,25 @@
     return output_fp_move_double (operands);
   return output_move_double (operands);
 }"
-  [(set_attr "type" "move,store,store,load,load,misc,fpalu,fpload,fpstore")
+  [(set_attr "type" "move,store,store,load,load,multi,fpalu,fpload,fpstore")
    (set_attr "length" "8,8,16,8,16,16,4,4,4")])
 
 (define_insn ""
+  [(set (match_operand:DI 0 "reg_or_nonsymb_mem_operand"
+			  "=r,o,Q,&r,&r,&r")
+	(match_operand:DI 1 "general_operand"
+			  "rM,r,r,o,Q,i"))]
+  "(register_operand (operands[0], DImode)
+    || reg_or_0_operand (operands[1], DImode))
+   && TARGET_SOFT_FLOAT"
+  "*
+{
+  return output_move_double (operands);
+}"
+  [(set_attr "type" "move,store,store,load,load,multi")
+   (set_attr "length" "8,8,16,8,16,16")])
+
+(define_insn ""
   [(set (match_operand:DI 0 "register_operand" "=r,&r")
 	(lo_sum:DI (match_operand:DI 1 "register_operand" "0,r")
 		   (match_operand:DI 2 "immediate_operand" "i,i")))]
@@ -1715,14 +2059,13 @@
   /* Don't output a 64 bit constant, since we can't trust the assembler to
      handle it correctly.  */
   if (GET_CODE (operands[2]) == CONST_DOUBLE)
-    operands[2] = gen_rtx (CONST_INT, VOIDmode, CONST_DOUBLE_LOW (operands[2]));
+    operands[2] = GEN_INT (CONST_DOUBLE_LOW (operands[2]));
   if (which_alternative == 1)
     output_asm_insn (\"copy %1,%0\", operands);
   return \"ldo R'%G2(%R1),%R0\";
 }"
-  ;; Need to set length for this arith insn because operand2
-  ;; is not an "arith_operand".
-  [(set_attr "length" "4,8")])
+  [(set_attr "type" "move,move")
+   (set_attr "length" "4,8")])
 
 ;; This pattern forces (set (reg:SF ...) (const_double ...))
 ;; to be reloaded by putting the constant into memory when
@@ -1735,9 +2078,10 @@
 ;; to handle obscure reloading cases.
 (define_insn ""
   [(set (match_operand:SF 0 "general_operand" "=?r,f")
-	(match_operand:SF 1 "" "?E,m"))]
+	(match_operand:SF 1 "" "?F,m"))]
   "GET_CODE (operands[1]) == CONST_DOUBLE
-   && operands[1] != CONST0_RTX (SFmode)"
+   && operands[1] != CONST0_RTX (SFmode)
+   && ! TARGET_SOFT_FLOAT"
   "* return (which_alternative == 0 ? singlemove_string (operands)
 				    : \" fldws%F1 %1,%0\");"
   [(set_attr "type" "move,fpload")
@@ -1791,8 +2135,9 @@
 			  "=f,r,f,r,Q,Q")
 	(match_operand:SF 1 "reg_or_0_or_nonsymb_mem_operand"
 			  "fG,rG,Q,Q,f,rG"))]
-  "register_operand (operands[0], SFmode)
-   || reg_or_0_operand (operands[1], SFmode)"
+  "(register_operand (operands[0], SFmode)
+    || reg_or_0_operand (operands[1], SFmode))
+   && ! TARGET_SOFT_FLOAT"
   "@
    fcpy,sgl %r1,%0
    copy %r1,%0
@@ -1804,11 +2149,26 @@
    (set_attr "length" "4,4,4,4,4,4")])
 
 (define_insn ""
+  [(set (match_operand:SF 0 "reg_or_nonsymb_mem_operand"
+			  "=r,r,Q")
+	(match_operand:SF 1 "reg_or_0_or_nonsymb_mem_operand"
+			  "rG,Q,rG"))]
+  "(register_operand (operands[0], SFmode)
+    || reg_or_0_operand (operands[1], SFmode))
+   && TARGET_SOFT_FLOAT"
+  "@
+   copy %r1,%0
+   ldw%M1 %1,%0
+   stw%M0 %r1,%0"
+  [(set_attr "type" "move,load,store")
+   (set_attr "length" "4,4,4")])
+
+(define_insn ""
   [(set (match_operand:SF 0 "register_operand" "=f")
 	(mem:SF (plus:SI (mult:SI (match_operand:SI 1 "register_operand" "r")
 				  (const_int 4))
 			 (match_operand:SI 2 "register_operand" "r"))))]
-  "! TARGET_DISABLE_INDEXING"
+  "! TARGET_DISABLE_INDEXING && ! TARGET_SOFT_FLOAT"
   "fldwx,s %1(0,%2),%0"
   [(set_attr "type" "fpload")
    (set_attr "length" "4")])
@@ -1831,7 +2191,7 @@
 			     (const_int 4))
 		    (match_operand:SI 2 "register_operand" "r"))
 		  (match_operand:SI 3 "const_int_operand" "rL"))))]
-  "! TARGET_DISABLE_INDEXING && reload_in_progress"
+  "! TARGET_DISABLE_INDEXING && ! TARGET_SOFT_FLOAT && reload_in_progress"
   "*
 {
   if (GET_CODE (operands[3]) == CONST_INT)
@@ -1847,7 +2207,7 @@
 				  (const_int 4))
 			 (match_operand:SI 2 "register_operand" "r")))
 	(match_operand:SF 0 "register_operand" "f"))]
-  "! TARGET_DISABLE_INDEXING"
+  "! TARGET_DISABLE_INDEXING && ! TARGET_SOFT_FLOAT"
   "fstwx,s %0,%1(0,%2)"
   [(set_attr "type" "fpstore")
    (set_attr "length" "4")])
@@ -1870,7 +2230,7 @@
 		     (match_operand:SI 2 "register_operand" "r"))
 		  (match_operand:SI 3 "const_int_operand" "rL")))
 	(match_operand:SF 0 "register_operand" "f"))]
-  "! TARGET_DISABLE_INDEXING && reload_in_progress"
+  "! TARGET_DISABLE_INDEXING && ! TARGET_SOFT_FLOAT && reload_in_progress"
   "*
 {
   if (GET_CODE (operands[3]) == CONST_INT)
@@ -1891,7 +2251,8 @@
   "@
    extru %1,31,16,%0
    ldh%M1 %1,%0"
-  [(set_attr "type" "unary,load")])
+  [(set_attr "type" "shift,load")
+   (set_attr "length" "4,4")])
 
 (define_insn "zero_extendqihi2"
   [(set (match_operand:HI 0 "register_operand" "=r,r")
@@ -1901,7 +2262,8 @@
   "@
    extru %1,31,8,%0
    ldb%M1 %1,%0"
-  [(set_attr "type" "unary,load")])
+  [(set_attr "type" "shift,load")
+   (set_attr "length" "4,4")])
 
 (define_insn "zero_extendqisi2"
   [(set (match_operand:SI 0 "register_operand" "=r,r")
@@ -1911,7 +2273,8 @@
   "@
    extru %1,31,8,%0
    ldb%M1 %1,%0"
-  [(set_attr "type" "unary,load")])
+  [(set_attr "type" "shift,load")
+   (set_attr "length" "4,4")])
 
 ;;- sign extension instructions
 
@@ -1920,21 +2283,24 @@
 	(sign_extend:SI (match_operand:HI 1 "register_operand" "r")))]
   ""
   "extrs %1,31,16,%0"
-  [(set_attr "type" "unary")])
+  [(set_attr "type" "shift")
+   (set_attr "length" "4")])
 
 (define_insn "extendqihi2"
   [(set (match_operand:HI 0 "register_operand" "=r")
 	(sign_extend:HI (match_operand:QI 1 "register_operand" "r")))]
   ""
   "extrs %1,31,8,%0"
-  [(set_attr "type" "unary")])
+  [(set_attr "type" "shift") 
+  (set_attr "length" "4")])
 
 (define_insn "extendqisi2"
   [(set (match_operand:SI 0 "register_operand" "=r")
 	(sign_extend:SI (match_operand:QI 1 "register_operand" "r")))]
   ""
   "extrs %1,31,8,%0"
-  [(set_attr "type" "unary")])
+  [(set_attr "type" "shift")
+   (set_attr "length" "4")])
 
 ;; Conversions between float and double.
 
@@ -1942,17 +2308,19 @@
   [(set (match_operand:DF 0 "register_operand" "=f")
 	(float_extend:DF
 	 (match_operand:SF 1 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fcnvff,sgl,dbl %1,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 (define_insn "truncdfsf2"
   [(set (match_operand:SF 0 "register_operand" "=f")
 	(float_truncate:SF
 	 (match_operand:DF 1 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fcnvff,dbl,sgl %1,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 ;; Conversion between fixed point and floating point.
 ;; Note that among the fix-to-float insns
@@ -1968,7 +2336,7 @@
 (define_insn ""
   [(set (match_operand:SF 0 "general_operand" "=f")
 	(float:SF (match_operand:SI 1 "const_int_operand" "m")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fldws %1,%0\;fcnvxf,sgl,sgl %0,%0"
   [(set_attr "type" "fpalu")
    (set_attr "length" "8")])
@@ -1976,9 +2344,10 @@
 (define_insn "floatsisf2"
   [(set (match_operand:SF 0 "general_operand" "=f")
 	(float:SF (match_operand:SI 1 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fcnvxf,sgl,sgl %1,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 ;; This pattern forces (set (reg:DF ...) (float:DF (const_int ...)))
 ;; to be reloaded by putting the constant into memory.
@@ -1986,7 +2355,7 @@
 (define_insn ""
   [(set (match_operand:DF 0 "general_operand" "=f")
 	(float:DF (match_operand:SI 1 "const_int_operand" "m")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fldws %1,%0\;fcnvxf,sgl,dbl %0,%0"
   [(set_attr "type" "fpalu")
    (set_attr "length" "8")])
@@ -1994,9 +2363,10 @@
 (define_insn "floatsidf2"
   [(set (match_operand:DF 0 "general_operand" "=f")
 	(float:DF (match_operand:SI 1 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fcnvxf,sgl,dbl %1,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 (define_expand "floatunssisf2"
   [(set (subreg:SI (match_dup 2) 1)
@@ -2005,7 +2375,7 @@
 	(const_int 0))
    (set (match_operand:SF 0 "general_operand" "")
 	(float:SF (match_dup 2)))]
-  "TARGET_SNAKE"
+  "TARGET_SNAKE && ! TARGET_SOFT_FLOAT"
   "operands[2] = gen_reg_rtx (DImode);")
 
 (define_expand "floatunssidf2"
@@ -2015,22 +2385,24 @@
 	(const_int 0))
    (set (match_operand:DF 0 "general_operand" "")
 	(float:DF (match_dup 2)))]
-  "TARGET_SNAKE"
+  "TARGET_SNAKE && ! TARGET_SOFT_FLOAT"
   "operands[2] = gen_reg_rtx (DImode);")
 
 (define_insn "floatdisf2"
   [(set (match_operand:SF 0 "general_operand" "=f")
 	(float:SF (match_operand:DI 1 "register_operand" "f")))]
-  "TARGET_SNAKE"
+  "TARGET_SNAKE && ! TARGET_SOFT_FLOAT"
   "fcnvxf,dbl,sgl %1,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 (define_insn "floatdidf2"
   [(set (match_operand:DF 0 "general_operand" "=f")
 	(float:DF (match_operand:DI 1 "register_operand" "f")))]
-  "TARGET_SNAKE"
+  "TARGET_SNAKE && ! TARGET_SOFT_FLOAT"
   "fcnvxf,dbl,dbl %1,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 ;; Convert a float to an actual integer.
 ;; Truncation is performed as part of the conversion.
@@ -2038,30 +2410,34 @@
 (define_insn "fix_truncsfsi2"
   [(set (match_operand:SI 0 "register_operand" "=f")
 	(fix:SI (fix:SF (match_operand:SF 1 "register_operand" "f"))))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fcnvfxt,sgl,sgl %1,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 (define_insn "fix_truncdfsi2"
   [(set (match_operand:SI 0 "register_operand" "=f")
 	(fix:SI (fix:DF (match_operand:DF 1 "register_operand" "f"))))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fcnvfxt,dbl,sgl %1,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 (define_insn "fix_truncsfdi2"
   [(set (match_operand:DI 0 "register_operand" "=f")
 	(fix:DI (fix:SF (match_operand:SF 1 "register_operand" "f"))))]
-  "TARGET_SNAKE"
+  "TARGET_SNAKE && ! TARGET_SOFT_FLOAT"
   "fcnvfxt,sgl,dbl %1,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 (define_insn "fix_truncdfdi2"
   [(set (match_operand:DI 0 "register_operand" "=f")
 	(fix:DI (fix:DF (match_operand:DF 1 "register_operand" "f"))))]
-  "TARGET_SNAKE"
+  "TARGET_SNAKE && ! TARGET_SOFT_FLOAT"
   "fcnvfxt,dbl,dbl %1,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 ;;- arithmetic instructions
 
@@ -2082,14 +2458,17 @@
   else
     return \"add %R2,%R1,%R0\;addc %2,%1,%0\";
 }"
-  [(set_attr "length" "8")])
+  [(set_attr "type" "binary")
+   (set_attr "length" "8")])
 
 (define_insn ""
   [(set (match_operand:SI 0 "register_operand" "=r")
 	(plus:SI (not:SI (match_operand:SI 1 "register_operand" "r"))
 		 (match_operand:SI 2 "register_operand" "r")))]
   ""
-  "uaddcm %2,%1,%0")
+  "uaddcm %2,%1,%0"
+  [(set_attr "type" "binary")
+   (set_attr "length" "4")])
 
 ;; define_splits to optimize cases of adding a constant integer
 ;; to a register when the constant does not fit in 14 bits.  */
@@ -2154,7 +2533,28 @@
   ""
   "@
    addl %1,%2,%0
-   ldo %2(%1),%0")
+   ldo %2(%1),%0"
+  [(set_attr "type" "binary,binary")
+   (set_attr "length" "4,4")])
+
+;; Disgusting kludge to work around reload bugs with frame pointer
+;; elimination.  Similar to other magic reload patterns in the
+;; indexed memory operations.
+(define_insn ""
+  [(set (match_operand:SI 0 "register_operand" "=&r")
+	(plus:SI (plus:SI (match_operand:SI 1 "register_operand" "%r")
+			  (match_operand:SI 2 "register_operand" "r"))
+		 (match_operand:SI 3 "const_int_operand" "rL")))]
+  "reload_in_progress"
+  "*
+{
+  if (GET_CODE (operands[3]) == CONST_INT)
+    return \"ldo %3(%2),%0\;addl %1,%0,%0\";
+  else
+    return \"addl %3,%2,%0\;addl %1,%0,%0\";
+}"
+  [(set_attr "type" "binary")
+   (set_attr "length" "8")])
 
 (define_insn "subdi3"
   [(set (match_operand:DI 0 "register_operand" "=r")
@@ -2162,7 +2562,8 @@
 		  (match_operand:DI 2 "register_operand" "r")))]
   ""
   "sub %R1,%R2,%R0\;subb %1,%2,%0"
-  [(set_attr "length" "8")])
+  [(set_attr "type" "binary")
+  (set_attr "length" "8")])
 
 (define_insn "subsi3"
   [(set (match_operand:SI 0 "register_operand" "=r,r")
@@ -2171,7 +2572,9 @@
   ""
   "@
    sub %1,%2,%0
-   subi %1,%2,%0")
+   subi %1,%2,%0"
+  [(set_attr "type" "binary,binary")
+   (set_attr "length" "4,4")])
 
 ;; Clobbering a "register_operand" instead of a match_scratch
 ;; in operand3 of millicode calls avoids spilling %r1 and
@@ -2190,7 +2593,7 @@
   ""
   "
 {
-  if (TARGET_SNAKE && ! TARGET_DISABLE_FPREGS)
+  if (TARGET_SNAKE && ! TARGET_DISABLE_FPREGS && ! TARGET_SOFT_FLOAT)
     {
       rtx scratch = gen_reg_rtx (DImode);
       operands[1] = force_reg (SImode, operands[1]);
@@ -2208,17 +2611,19 @@
   [(set (match_operand:DI 0 "nonimmediate_operand" "=f")
 	(mult:DI (zero_extend:DI (match_operand:SI 1 "nonimmediate_operand" "f"))
 		 (zero_extend:DI (match_operand:SI 2 "nonimmediate_operand" "f"))))]
-  "TARGET_SNAKE && ! TARGET_DISABLE_FPREGS"
+  "TARGET_SNAKE && ! TARGET_DISABLE_FPREGS && ! TARGET_SOFT_FLOAT"
   "xmpyu %1,%2,%0"
-  [(set_attr "type" "fpmul")])
+  [(set_attr "type" "fpmuldbl")
+   (set_attr "length" "4")])
 
 (define_insn ""
   [(set (match_operand:DI 0 "nonimmediate_operand" "=f")
 	(mult:DI (zero_extend:DI (match_operand:SI 1 "nonimmediate_operand" "f"))
 		 (match_operand:DI 2 "uint32_operand" "f")))]
-  "TARGET_SNAKE && ! TARGET_DISABLE_FPREGS"
+  "TARGET_SNAKE && ! TARGET_DISABLE_FPREGS && ! TARGET_SOFT_FLOAT"
   "xmpyu %1,%R2,%0"
-  [(set_attr "type" "fpmul")])
+  [(set_attr "type" "fpmuldbl")
+   (set_attr "length" "4")])
 
 (define_insn ""
   [(set (reg:SI 29) (mult:SI (reg:SI 26) (reg:SI 25)))
@@ -2229,10 +2634,13 @@
   ""
   "* return output_mul_insn (0, insn);"
   [(set_attr "type" "milli")
-   (set (attr "length") (if_then_else (ne (symbol_ref "TARGET_LONG_CALLS")
-					  (const_int 0))
-				      (const_int 4)
-				      (const_int 24)))])
+   (set (attr "length")
+     (if_then_else (and (eq (symbol_ref "TARGET_PORTABLE_RUNTIME")
+			    (const_int 0))
+			(eq (symbol_ref "TARGET_MILLICODE_LONG_CALLS")
+			    (const_int 0)))
+		   (const_int 4)
+		   (const_int 24)))])
 
 ;;; Division and mod.
 (define_expand "divsi3"
@@ -2247,30 +2655,14 @@
   ""
   "
 {
-  operands[3] = gen_reg_rtx(SImode);
-  if (!(GET_CODE (operands[2]) == CONST_INT && emit_hpdiv_const(operands, 0)))
-    {
-      emit_move_insn (gen_rtx (REG, SImode, 26), operands[1]);
-      emit_move_insn (gen_rtx (REG, SImode, 25), operands[2]);
-      emit
-	(gen_rtx
-	 (PARALLEL, VOIDmode,
-	  gen_rtvec (5, gen_rtx (SET, VOIDmode, gen_rtx (REG, SImode, 29),
-				 gen_rtx (DIV, SImode,
-					  gen_rtx (REG, SImode, 26),
-					  gen_rtx (REG, SImode, 25))),
-		     gen_rtx (CLOBBER, VOIDmode, operands[3]),
-		     gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 26)),
-		     gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 25)),
-		     gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 31)))));
-      emit_move_insn (operands[0], gen_rtx (REG, SImode, 29));
-    }
-  DONE;
+  operands[3] = gen_reg_rtx (SImode);
+  if (GET_CODE (operands[2]) == CONST_INT && emit_hpdiv_const (operands, 0))
+    DONE;
 }")
 
 (define_insn ""
   [(set (reg:SI 29)
-    (div:SI (reg:SI 26) (match_operand:SI 0 "div_operand" "")))
+	(div:SI (reg:SI 26) (match_operand:SI 0 "div_operand" "")))
    (clobber (match_operand:SI 1 "register_operand" "=a"))
    (clobber (reg:SI 26))
    (clobber (reg:SI 25))
@@ -2279,10 +2671,13 @@
   "*
    return output_div_insn (operands, 0, insn);"
   [(set_attr "type" "milli")
-   (set (attr "length") (if_then_else (ne (symbol_ref "TARGET_LONG_CALLS")
-					  (const_int 0))
-				      (const_int 4)
-				      (const_int 24)))])
+   (set (attr "length")
+     (if_then_else (and (eq (symbol_ref "TARGET_PORTABLE_RUNTIME")
+			    (const_int 0))
+			(eq (symbol_ref "TARGET_MILLICODE_LONG_CALLS")
+			    (const_int 0)))
+		   (const_int 4)
+		   (const_int 24)))])
 
 (define_expand "udivsi3"
   [(set (reg:SI 26) (match_operand:SI 1 "move_operand" ""))
@@ -2296,30 +2691,14 @@
   ""
   "
 {
-  operands[3] = gen_reg_rtx(SImode);
-  if (!(GET_CODE (operands[2]) == CONST_INT && emit_hpdiv_const(operands, 1)))
-    {
-      emit_move_insn (gen_rtx (REG, SImode, 26), operands[1]);
-      emit_move_insn (gen_rtx (REG, SImode, 25), operands[2]);
-      emit
-	(gen_rtx
-	 (PARALLEL, VOIDmode,
-	  gen_rtvec (5, gen_rtx (SET, VOIDmode, gen_rtx (REG, SImode, 29),
-				 gen_rtx (UDIV, SImode,
-					  gen_rtx (REG, SImode, 26),
-					  gen_rtx (REG, SImode, 25))),
-		     gen_rtx (CLOBBER, VOIDmode, operands[3]),
-		     gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 26)),
-		     gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 25)),
-		     gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 31)))));
-      emit_move_insn (operands[0], gen_rtx (REG, SImode, 29));
-    }
-  DONE;
+  operands[3] = gen_reg_rtx (SImode);
+  if (GET_CODE (operands[2]) == CONST_INT && emit_hpdiv_const (operands, 1))
+    DONE;
 }")
 
 (define_insn ""
   [(set (reg:SI 29)
-    (udiv:SI (reg:SI 26) (match_operand:SI 0 "div_operand" "")))
+	(udiv:SI (reg:SI 26) (match_operand:SI 0 "div_operand" "")))
    (clobber (match_operand:SI 1 "register_operand" "=a"))
    (clobber (reg:SI 26))
    (clobber (reg:SI 25))
@@ -2328,10 +2707,13 @@
   "*
    return output_div_insn (operands, 1, insn);"
   [(set_attr "type" "milli")
-   (set (attr "length") (if_then_else (ne (symbol_ref "TARGET_LONG_CALLS")
-					  (const_int 0))
-				      (const_int 4)
-				      (const_int 24)))])
+   (set (attr "length")
+     (if_then_else (and (eq (symbol_ref "TARGET_PORTABLE_RUNTIME")
+			    (const_int 0))
+			(eq (symbol_ref "TARGET_MILLICODE_LONG_CALLS")
+			    (const_int 0)))
+		   (const_int 4)
+		   (const_int 24)))])
 
 (define_expand "modsi3"
   [(set (reg:SI 26) (match_operand:SI 1 "move_operand" ""))
@@ -2345,22 +2727,7 @@
   ""
   "
 {
-  operands[3] = gen_reg_rtx(SImode);
-  emit_move_insn (gen_rtx (REG, SImode, 26), operands[1]);
-  emit_move_insn (gen_rtx (REG, SImode, 25), operands[2]);
-  emit
-    (gen_rtx
-     (PARALLEL, VOIDmode,
-      gen_rtvec (5, gen_rtx (SET, VOIDmode, gen_rtx (REG, SImode, 29),
-			     gen_rtx (MOD, SImode,
-				      gen_rtx (REG, SImode, 26),
-				      gen_rtx (REG, SImode, 25))),
-		 gen_rtx (CLOBBER, VOIDmode, operands[3]),
-		 gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 26)),
-		 gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 25)),
-		 gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 31)))));
-  emit_move_insn (operands[0], gen_rtx (REG, SImode, 29));
-  DONE;
+  operands[3] = gen_reg_rtx (SImode);
 }")
 
 (define_insn ""
@@ -2373,10 +2740,13 @@
   "*
   return output_mod_insn (0, insn);"
   [(set_attr "type" "milli")
-   (set (attr "length") (if_then_else (ne (symbol_ref "TARGET_LONG_CALLS")
-					  (const_int 0))
-				      (const_int 4)
-				      (const_int 24)))])
+   (set (attr "length")
+     (if_then_else (and (eq (symbol_ref "TARGET_PORTABLE_RUNTIME")
+			    (const_int 0))
+			(eq (symbol_ref "TARGET_MILLICODE_LONG_CALLS")
+			    (const_int 0)))
+		   (const_int 4)
+		   (const_int 24)))])
 
 (define_expand "umodsi3"
   [(set (reg:SI 26) (match_operand:SI 1 "move_operand" ""))
@@ -2390,22 +2760,7 @@
   ""
   "
 {
-  operands[3] = gen_reg_rtx(SImode);
-  emit_move_insn (gen_rtx (REG, SImode, 26), operands[1]);
-  emit_move_insn (gen_rtx (REG, SImode, 25), operands[2]);
-  emit
-    (gen_rtx
-     (PARALLEL, VOIDmode,
-      gen_rtvec (5, gen_rtx (SET, VOIDmode, gen_rtx (REG, SImode, 29),
-			     gen_rtx (UMOD, SImode,
-				      gen_rtx (REG, SImode, 26),
-				      gen_rtx (REG, SImode, 25))),
-		 gen_rtx (CLOBBER, VOIDmode, operands[3]),
-		 gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 26)),
-		 gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 25)),
-		 gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 31)))));
-  emit_move_insn (operands[0], gen_rtx (REG, SImode, 29));
-  DONE;
+  operands[3] = gen_reg_rtx (SImode);
 }")
 
 (define_insn ""
@@ -2418,10 +2773,13 @@
   "*
   return output_mod_insn (1, insn);"
   [(set_attr "type" "milli")
-   (set (attr "length") (if_then_else (ne (symbol_ref "TARGET_LONG_CALLS")
-					  (const_int 0))
-				      (const_int 4)
-				      (const_int 24)))])
+   (set (attr "length")
+     (if_then_else (and (eq (symbol_ref "TARGET_PORTABLE_RUNTIME")
+			    (const_int 0))
+			(eq (symbol_ref "TARGET_MILLICODE_LONG_CALLS")
+			    (const_int 0)))
+		   (const_int 4)
+		   (const_int 24)))])
 
 ;;- and instructions
 ;; We define DImode `and` so with DImode `not` we can get
@@ -2446,7 +2804,8 @@
 		(match_operand:DI 2 "register_operand" "r")))]
   ""
   "and %1,%2,%0\;and %R1,%R2,%R0"
-  [(set_attr "length" "8")])
+  [(set_attr "type" "binary")
+   (set_attr "length" "8")])
 
 ; The ? for op1 makes reload prefer zdepi instead of loading a huge
 ; constant with ldil;ldo.
@@ -2456,8 +2815,8 @@
 		(match_operand:SI 2 "and_operand" "rO,P")))]
   ""
   "* return output_and (operands); "
-  [(set_attr "type" "binary")
-   (set_attr "length" "4")])
+  [(set_attr "type" "binary,shift")
+   (set_attr "length" "4,4")])
 
 (define_insn ""
   [(set (match_operand:DI 0 "register_operand" "=r")
@@ -2465,14 +2824,17 @@
 		(match_operand:DI 2 "register_operand" "r")))]
   ""
   "andcm %2,%1,%0\;andcm %R2,%R1,%R0"
-  [(set_attr "length" "8")])
+  [(set_attr "type" "binary")
+   (set_attr "length" "8")])
 
 (define_insn ""
   [(set (match_operand:SI 0 "register_operand" "=r")
 	(and:SI (not:SI (match_operand:SI 1 "register_operand" "r"))
 		(match_operand:SI 2 "register_operand" "r")))]
   ""
-  "andcm %2,%1,%0")
+  "andcm %2,%1,%0"
+  [(set_attr "type" "binary")
+  (set_attr "length" "4")])
 
 (define_expand "iordi3"
   [(set (match_operand:DI 0 "register_operand" "")
@@ -2493,7 +2855,8 @@
 		(match_operand:DI 2 "register_operand" "r")))]
   ""
   "or %1,%2,%0\;or %R1,%R2,%R0"
-  [(set_attr "length" "8")])
+  [(set_attr "type" "binary")
+   (set_attr "length" "8")])
 
 ;; Need a define_expand because we've run out of CONST_OK... characters.
 (define_expand "iorsi3"
@@ -2508,20 +2871,22 @@
 }")
 
 (define_insn ""
-  [(set (match_operand:SI 0 "register_operand" "=r")
-	(ior:SI (match_operand:SI 1 "register_operand" "0")
-		(match_operand:SI 2 "ior_operand" "")))]
+  [(set (match_operand:SI 0 "register_operand" "=r,r")
+	(ior:SI (match_operand:SI 1 "register_operand" "0,0")
+		(match_operand:SI 2 "ior_operand" "M,i")))]
   ""
   "* return output_ior (operands); "
-  [(set_attr "type" "binary")
-   (set_attr "length" "4")])
+  [(set_attr "type" "binary,shift")
+   (set_attr "length" "4,4")])
 
 (define_insn ""
   [(set (match_operand:SI 0 "register_operand" "=r")
 	(ior:SI (match_operand:SI 1 "register_operand" "%r")
 		(match_operand:SI 2 "register_operand" "r")))]
   ""
-  "or %1,%2,%0")
+  "or %1,%2,%0"
+  [(set_attr "type" "binary")
+   (set_attr "length" "4")])
 
 (define_expand "xordi3"
   [(set (match_operand:DI 0 "register_operand" "")
@@ -2542,14 +2907,17 @@
 		(match_operand:DI 2 "register_operand" "r")))]
   ""
   "xor %1,%2,%0\;xor %R1,%R2,%R0"
-  [(set_attr "length" "8")])
+  [(set_attr "type" "binary")
+   (set_attr "length" "8")])
 
 (define_insn "xorsi3"
   [(set (match_operand:SI 0 "register_operand" "=r")
 	(xor:SI (match_operand:SI 1 "register_operand" "%r")
 		(match_operand:SI 2 "register_operand" "r")))]
   ""
-  "xor %1,%2,%0")
+  "xor %1,%2,%0"
+  [(set_attr "type" "binary")
+   (set_attr "length" "4")])
 
 (define_insn "negdi2"
   [(set (match_operand:DI 0 "register_operand" "=r")
@@ -2564,7 +2932,8 @@
 	(neg:SI (match_operand:SI 1 "register_operand" "r")))]
   ""
   "sub 0,%1,%0"
-  [(set_attr "type" "unary")])
+  [(set_attr "type" "unary")
+   (set_attr "length" "4")])
 
 (define_expand "one_cmpldi2"
   [(set (match_operand:DI 0 "register_operand" "")
@@ -2589,7 +2958,8 @@
 	(not:SI (match_operand:SI 1 "register_operand" "r")))]
   ""
   "uaddcm 0,%1,%0"
-  [(set_attr "type" "unary")])
+  [(set_attr "type" "unary")
+   (set_attr "length" "4")])
 
 ;; Floating point arithmetic instructions.
 
@@ -2597,107 +2967,121 @@
   [(set (match_operand:DF 0 "register_operand" "=f")
 	(plus:DF (match_operand:DF 1 "register_operand" "f")
 		 (match_operand:DF 2 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fadd,dbl %1,%2,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 (define_insn "addsf3"
   [(set (match_operand:SF 0 "register_operand" "=f")
 	(plus:SF (match_operand:SF 1 "register_operand" "f")
 		 (match_operand:SF 2 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fadd,sgl %1,%2,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 (define_insn "subdf3"
   [(set (match_operand:DF 0 "register_operand" "=f")
 	(minus:DF (match_operand:DF 1 "register_operand" "f")
 		  (match_operand:DF 2 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fsub,dbl %1,%2,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 (define_insn "subsf3"
   [(set (match_operand:SF 0 "register_operand" "=f")
 	(minus:SF (match_operand:SF 1 "register_operand" "f")
 		  (match_operand:SF 2 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fsub,sgl %1,%2,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 (define_insn "muldf3"
   [(set (match_operand:DF 0 "register_operand" "=f")
 	(mult:DF (match_operand:DF 1 "register_operand" "f")
 		 (match_operand:DF 2 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fmpy,dbl %1,%2,%0"
-  [(set_attr "type" "fpmul")])
+  [(set_attr "type" "fpmuldbl")
+   (set_attr "length" "4")])
 
 (define_insn "mulsf3"
   [(set (match_operand:SF 0 "register_operand" "=f")
 	(mult:SF (match_operand:SF 1 "register_operand" "f")
 		 (match_operand:SF 2 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fmpy,sgl %1,%2,%0"
-  [(set_attr "type" "fpmul")])
+  [(set_attr "type" "fpmulsgl")
+   (set_attr "length" "4")])
 
 (define_insn "divdf3"
   [(set (match_operand:DF 0 "register_operand" "=f")
 	(div:DF (match_operand:DF 1 "register_operand" "f")
 		(match_operand:DF 2 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fdiv,dbl %1,%2,%0"
-  [(set_attr "type" "fpdivdbl")])
+  [(set_attr "type" "fpdivdbl")
+   (set_attr "length" "4")])
 
 (define_insn "divsf3"
   [(set (match_operand:SF 0 "register_operand" "=f")
 	(div:SF (match_operand:SF 1 "register_operand" "f")
 		(match_operand:SF 2 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fdiv,sgl %1,%2,%0"
-  [(set_attr "type" "fpdivsgl")])
+  [(set_attr "type" "fpdivsgl")
+   (set_attr "length" "4")])
 
 (define_insn "negdf2"
   [(set (match_operand:DF 0 "register_operand" "=f")
 	(neg:DF (match_operand:DF 1 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fsub,dbl 0,%1,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 (define_insn "negsf2"
   [(set (match_operand:SF 0 "register_operand" "=f")
 	(neg:SF (match_operand:SF 1 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fsub,sgl 0,%1,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 (define_insn "absdf2"
   [(set (match_operand:DF 0 "register_operand" "=f")
 	(abs:DF (match_operand:DF 1 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fabs,dbl %1,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 (define_insn "abssf2"
   [(set (match_operand:SF 0 "register_operand" "=f")
 	(abs:SF (match_operand:SF 1 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fabs,sgl %1,%0"
-  [(set_attr "type" "fpalu")])
+  [(set_attr "type" "fpalu")
+   (set_attr "length" "4")])
 
 (define_insn "sqrtdf2"
   [(set (match_operand:DF 0 "register_operand" "=f")
 	(sqrt:DF (match_operand:DF 1 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fsqrt,dbl %1,%0"
-  [(set_attr "type" "fpsqrtdbl")])
+  [(set_attr "type" "fpsqrtdbl")
+   (set_attr "length" "4")])
 
 (define_insn "sqrtsf2"
   [(set (match_operand:SF 0 "register_operand" "=f")
 	(sqrt:SF (match_operand:SF 1 "register_operand" "f")))]
-  ""
+  "! TARGET_SOFT_FLOAT"
   "fsqrt,sgl %1,%0"
-  [(set_attr "type" "fpsqrtsgl")])
+  [(set_attr "type" "fpsqrtsgl")
+   (set_attr "length" "4")])
 
 ;;- Shift instructions
 
@@ -2727,7 +3111,9 @@
 			  (match_operand:SI 3 "shadd_operand" ""))
 		 (match_operand:SI 1 "register_operand" "r")))]
   ""
-  "sh%O3addl %2,%1,%0")
+  "sh%O3addl %2,%1,%0"
+  [(set_attr "type" "binary")
+   (set_attr "length" "4")])
 
 ;; This variant of the above insn can occur if the first operand
 ;; is the frame pointer.  This is a kludge, but there doesn't
@@ -2762,14 +3148,14 @@
     {
       rtx temp = gen_reg_rtx (SImode);
       emit_insn (gen_subsi3 (temp, GEN_INT (31), operands[2]));
-	if (GET_CODE (operands[1]) == CONST_INT)
-	  emit_insn (gen_zvdep_imm (operands[0], operands[1], temp));
-	else
-	  emit_insn (gen_zvdep32 (operands[0], operands[1], temp));
+      if (GET_CODE (operands[1]) == CONST_INT)
+	emit_insn (gen_zvdep_imm (operands[0], operands[1], temp));
+      else
+	emit_insn (gen_zvdep32 (operands[0], operands[1], temp));
       DONE;
     }
   /* Make sure both inputs are not constants,
-     the recognizer can't handle that.  */
+     there are no patterns for that.  */
   operands[1] = force_reg (SImode, operands[1]);
 }")
 
@@ -2779,7 +3165,7 @@
 		   (match_operand:SI 2 "const_int_operand" "n")))]
   ""
   "zdep %1,%P2,%L2,%0"
-  [(set_attr "type" "binary")
+  [(set_attr "type" "shift")
    (set_attr "length" "4")])
 
 ; Match cases of op1 a CONST_INT here that zvdep_imm doesn't handle.
@@ -2796,7 +3182,9 @@
   ""
   "@
    zvdep %1,32,%0
-   zvdepi %1,32,%0")
+   zvdepi %1,32,%0"
+  [(set_attr "type" "shift,shift")
+   (set_attr "length" "4,4")])
 
 (define_insn "zvdep_imm"
   [(set (match_operand:SI 0 "register_operand" "=r")
@@ -2810,7 +3198,9 @@
   operands[2] = GEN_INT (4 + exact_log2 ((x >> 4) + 1));
   operands[1] = GEN_INT ((x & 0xf) - 0x10);
   return \"zvdepi %1,%2,%0\";
-}")
+}"
+  [(set_attr "type" "shift")
+   (set_attr "length" "4")])
 
 (define_insn "vdepi_ior"
   [(set (match_operand:SI 0 "register_operand" "=r")
@@ -2825,7 +3215,9 @@
   int x = INTVAL (operands[1]);
   operands[2] = GEN_INT (exact_log2 (x + 1));
   return \"vdepi -1,%2,%0\";
-}")
+}"
+  [(set_attr "type" "shift")
+   (set_attr "length" "4")])
 
 (define_insn "vdepi_and"
   [(set (match_operand:SI 0 "register_operand" "=r")
@@ -2840,7 +3232,9 @@
   int x = INTVAL (operands[1]);
   operands[2] = GEN_INT (exact_log2 ((~x) + 1));
   return \"vdepi 0,%2,%0\";
-}")
+}"
+  [(set_attr "type" "shift")
+   (set_attr "length" "4")])
 
 (define_expand "ashrsi3"
   [(set (match_operand:SI 0 "register_operand" "")
@@ -2864,7 +3258,7 @@
 		     (match_operand:SI 2 "const_int_operand" "n")))]
   ""
   "extrs %1,%P2,%L2,%0"
-  [(set_attr "type" "binary")
+  [(set_attr "type" "shift")
    (set_attr "length" "4")])
 
 (define_insn "vextrs32"
@@ -2873,7 +3267,9 @@
 		     (minus:SI (const_int 31)
 			       (match_operand:SI 2 "register_operand" "q"))))]
   ""
-  "vextrs %1,32,%0")
+  "vextrs %1,32,%0"
+  [(set_attr "type" "shift")
+   (set_attr "length" "4")])
 
 (define_insn "lshrsi3"
   [(set (match_operand:SI 0 "register_operand" "=r,r")
@@ -2883,7 +3279,7 @@
   "@
    vshd 0,%1,%0
    extru %1,%P2,%L2,%0"
-  [(set_attr "type" "binary")
+  [(set_attr "type" "shift")
    (set_attr "length" "4")])
 
 (define_insn "rotrsi3"
@@ -2901,7 +3297,7 @@
   else
     return \"vshd %1,%1,%0\";
 }"
-  [(set_attr "type" "binary")
+  [(set_attr "type" "shift")
    (set_attr "length" "4")])
 
 (define_insn "rotlsi3"
@@ -2914,7 +3310,7 @@
   operands[2] = GEN_INT ((32 - INTVAL (operands[2])) & 31);
   return \"shd %1,%1,%2,%0\";
 }"
-  [(set_attr "type" "binary")
+  [(set_attr "type" "shift")
    (set_attr "length" "4")])
 
 (define_insn ""
@@ -2926,7 +3322,7 @@
 			(match_operand:SI 4 "const_int_operand" "n"))]))]
   "INTVAL (operands[3]) + INTVAL (operands[4]) == 32"
   "shd %1,%2,%4,%0"
-  [(set_attr "type" "binary")
+  [(set_attr "type" "shift")
    (set_attr "length" "4")])
 
 (define_insn ""
@@ -2938,7 +3334,7 @@
 		      (match_operand:SI 3 "const_int_operand" "n"))]))]
   "INTVAL (operands[3]) + INTVAL (operands[4]) == 32"
   "shd %1,%2,%4,%0"
-  [(set_attr "type" "binary")
+  [(set_attr "type" "shift")
    (set_attr "length" "4")])
 
 (define_insn ""
@@ -2954,7 +3350,7 @@
   operands[2] = GEN_INT (31 - cnt);
   return \"zdep %1,%2,%3,%0\";
 }"
-  [(set_attr "type" "binary")
+  [(set_attr "type" "shift")
    (set_attr "length" "4")])
 
 ;; Unconditional and other jump instructions.
@@ -2963,7 +3359,8 @@
   [(return)]
   "hppa_can_use_return_insn_p ()"
   "bv%* 0(%%r2)"
-  [(set_attr "type" "branch")])
+  [(set_attr "type" "branch")
+   (set_attr "length" "4")])
 
 ;; Use a different pattern for functions which have non-trivial
 ;; epilogues so as not to confuse jump and reorg.
@@ -2972,7 +3369,8 @@
    (return)]
   ""
   "bv%* 0(%%r2)"
-  [(set_attr "type" "branch")])
+  [(set_attr "type" "branch")
+   (set_attr "length" "4")])
 
 (define_expand "prologue"
   [(const_int 0)]
@@ -3004,7 +3402,8 @@
    (use (match_operand:SI 0 "const_int_operand" ""))]
   ""
   "bl _mcount,%%r2\;ldo %0(%%r2),%%r25"
-  [(set_attr "length" "8")])
+  [(set_attr "type" "multi")
+   (set_attr "length" "8")])
 
 (define_insn "blockage"
   [(unspec_volatile [(const_int 2)] 0)]
@@ -3012,6 +3411,13 @@
   ""
   [(set_attr "length" "0")])
 
+(define_insn "switch_jump"
+  [(set:DI (pc) (label_ref (match_operand 0 "" "")))]
+  ""
+  "bl %l0,0%#"
+  [(set_attr "type" "uncond_branch")
+   (set_attr "length" "4")])
+
 (define_insn "jump"
   [(set (pc) (label_ref (match_operand 0 "" "")))]
   ""
@@ -3088,7 +3494,8 @@
       return \"sub,>> %0,%1,0\;blr,n %0,0\;b,n %l3\";
     }
 }"
-  [(set_attr "length" "12")])
+  [(set_attr "type" "multi")
+   (set_attr "length" "12")])
 
 ;; Need nops for the calls because execution is supposed to continue
 ;; past; we don't want to nullify an instruction that we need.
@@ -3102,12 +3509,9 @@
   "
 {
   rtx op;
+  rtx call_insn;
 
-  if (flag_pic)
-    emit_insn (gen_rtx (USE, VOIDmode,
-			gen_rtx (REG, Pmode, PIC_OFFSET_TABLE_REGNUM)));
-
-  if (TARGET_LONG_CALLS)
+  if (TARGET_PORTABLE_RUNTIME)
     op = force_reg (SImode, XEXP (operands[0], 0));
   else
     op = XEXP (operands[0], 0);
@@ -3118,18 +3522,23 @@
      to change the named call into an indirect call in some cases (using
      two patterns keeps CSE from performing this optimization).  */
   if (GET_CODE (op) == SYMBOL_REF)
-    emit_call_insn (gen_call_internal_symref (op, operands[1]));
+    call_insn = emit_call_insn (gen_call_internal_symref (op, operands[1]));
   else
-    emit_call_insn (gen_call_internal_reg (force_reg (SImode, op),
-					   operands[1]));
+    call_insn = emit_call_insn (gen_call_internal_reg (force_reg (SImode, op),
+						       operands[1]));
 
   if (flag_pic)
     {
-      if (!hppa_save_pic_table_rtx)
-	hppa_save_pic_table_rtx = gen_reg_rtx (Pmode);
-      emit_insn (gen_rtx (SET, VOIDmode,
-			  gen_rtx (REG, Pmode, PIC_OFFSET_TABLE_REGNUM),
-			  hppa_save_pic_table_rtx));
+      use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), pic_offset_table_rtx);
+
+      /* After each call we must restore the PIC register, even if it
+	 doesn't appear to be used.
+
+         This will set regs_ever_live for the callee saved register we
+	 stored the PIC register in.  */
+      emit_move_insn (pic_offset_table_rtx,
+		      gen_rtx (REG, SImode, PIC_OFFSET_TABLE_REGNUM_SAVED));
+      emit_insn (gen_rtx (USE, VOIDmode, pic_offset_table_rtx));
     }
   DONE;
 }")
@@ -3139,14 +3548,21 @@
 	 (match_operand 1 "" "i"))
    (clobber (reg:SI 2))
    (use (const_int 0))]
-  "! TARGET_LONG_CALLS"
+  "! TARGET_PORTABLE_RUNTIME"
   "*
 {
   output_arg_descriptor (insn);
   return output_call (insn, operands[0], gen_rtx (REG, SImode, 2));
 }"
   [(set_attr "type" "call")
-   (set_attr "length" "4")])
+   (set (attr "length")
+      (if_then_else (lt (plus (symbol_ref "total_code_bytes") (pc))
+			(const_int 240000))
+		    (const_int 4)
+		    (if_then_else (ne (symbol_ref "TARGET_MILLICODE_LONG_CALLS")
+				      (const_int 0))
+				  (const_int 64)
+				  (const_int 52))))])
 
 (define_insn "call_internal_reg"
   [(call (mem:SI (match_operand:SI 0 "register_operand" "r"))
@@ -3156,34 +3572,36 @@
   ""
   "*
 {
+  if (TARGET_FAST_INDIRECT_CALLS)
+    return \"ble 0(%%sr4,%r0)\;copy %%r31,%%r2\";
+
   /* Yuk!  bl may not be able to reach $$dyncall.  */
-  if (TARGET_LONG_CALLS)
+  if (TARGET_PORTABLE_RUNTIME || TARGET_MILLICODE_LONG_CALLS)
     return \"copy %r0,%%r22\;ldil L%%$$dyncall,%%r31\;ldo R%%$$dyncall(%%r31),%%r31\;blr 0,%%r2\;bv,n 0(%%r31)\;nop\";
   else
     return \"copy %r0,%%r22\;.CALL\\tARGW0=GR\;bl $$dyncall,%%r31\;copy %%r31,%%r2\";
 }"
   [(set_attr "type" "dyncall")
-   (set (attr "length") (if_then_else (ne (symbol_ref "TARGET_LONG_CALLS")
-					  (const_int 0))
-				      (const_int 12)
-				      (const_int 24)))])
+   (set (attr "length")
+     (if_then_else (and (eq (symbol_ref "TARGET_PORTABLE_RUNTIME")
+			    (const_int 0))
+			(eq (symbol_ref "TARGET_MILLICODE_LONG_CALLS")
+			    (const_int 0)))
+		   (const_int 12)
+		   (const_int 24)))])
 
 (define_expand "call_value"
   [(parallel [(set (match_operand 0 "" "")
 		   (call (match_operand:SI 1 "" "")
 			 (match_operand 2 "" "")))
 	      (clobber (reg:SI 2))])]
-  ;;- Don't use operand 1 for most machines.
   ""
   "
 {
   rtx op;
+  rtx call_insn;
 
-  if (flag_pic)
-    emit_insn (gen_rtx (USE, VOIDmode,
-			gen_rtx (REG, Pmode, PIC_OFFSET_TABLE_REGNUM)));
-
-  if (TARGET_LONG_CALLS)
+  if (TARGET_PORTABLE_RUNTIME)
     op = force_reg (SImode, XEXP (operands[1], 0));
   else
     op = XEXP (operands[1], 0);
@@ -3194,20 +3612,46 @@
      to change the named call into an indirect call in some cases (using
      two patterns keeps CSE from performing this optimization).  */
   if (GET_CODE (op) == SYMBOL_REF)
-    emit_call_insn (gen_call_value_internal_symref (operands[0], op,
-						    operands[2]));
+    call_insn = emit_call_insn (gen_call_value_internal_symref (operands[0],
+								op,
+								operands[2]));
   else
-    emit_call_insn (gen_call_value_internal_reg (operands[0],
-						 force_reg (SImode, op),
-						 operands[2]));
+    call_insn = emit_call_insn (gen_call_value_internal_reg (operands[0],
+							     force_reg (SImode, op),
+							     operands[2]));
 
   if (flag_pic)
     {
-      if (!hppa_save_pic_table_rtx)
-	hppa_save_pic_table_rtx = gen_reg_rtx (Pmode);
-      emit_insn (gen_rtx (SET, VOIDmode,
-			  gen_rtx (REG, Pmode, PIC_OFFSET_TABLE_REGNUM),
-			  hppa_save_pic_table_rtx));
+      use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), pic_offset_table_rtx);
+
+      /* After each call we must restore the PIC register, even if it
+	 doesn't appear to be used.
+
+         This will set regs_ever_live for the callee saved register we
+	 stored the PIC register in.  */
+      emit_move_insn (pic_offset_table_rtx,
+		      gen_rtx (REG, SImode, PIC_OFFSET_TABLE_REGNUM_SAVED));
+      emit_insn (gen_rtx (USE, VOIDmode, pic_offset_table_rtx));
+
+      /* Gross.  We have to keep the scheduler from moving the restore
+	 of the PIC register away from the call.  SCHED_GROUP_P is
+	 supposed to do this, but for some reason the compiler will
+	 go into an infinite loop when we use that.
+
+	 This method (blockage insn) may make worse code (then again
+	 it may not since calls are nearly blockages anyway), but at
+	 least it should work.  */
+      emit_insn (gen_blockage ());
+
+      /* Gross.  We have to keep the scheduler from moving the restore
+	 of the PIC register away from the call.  SCHED_GROUP_P is
+	 supposed to do this, but for some reason the compiler will
+	 go into an infinite loop when we use that.
+
+	 This method (blockage insn) may make worse code (then again
+	 it may not since calls are nearly blockages anyway), but at
+	 least it should work.  */
+      emit_insn (gen_blockage ());
     }
   DONE;
 }")
@@ -3219,14 +3663,21 @@
    (clobber (reg:SI 2))
    (use (const_int 0))]
   ;;- Don't use operand 1 for most machines.
-  "! TARGET_LONG_CALLS"
+  "! TARGET_PORTABLE_RUNTIME"
   "*
 {
   output_arg_descriptor (insn);
   return output_call (insn, operands[1], gen_rtx (REG, SImode, 2));
 }"
   [(set_attr "type" "call")
-   (set_attr "length" "4")])
+   (set (attr "length")
+      (if_then_else (lt (plus (symbol_ref "total_code_bytes") (pc))
+			(const_int 240000))
+		    (const_int 4)
+		    (if_then_else (ne (symbol_ref "TARGET_MILLICODE_LONG_CALLS")
+				      (const_int 0))
+				  (const_int 64)
+				  (const_int 52))))])
 
 (define_insn "call_value_internal_reg"
   [(set (match_operand 0 "" "=rf")
@@ -3234,21 +3685,26 @@
 	      (match_operand 2 "" "i")))
    (clobber (reg:SI 2))
    (use (const_int 1))]
-  ;;- Don't use operand 1 for most machines.
   ""
   "*
 {
+  if (TARGET_FAST_INDIRECT_CALLS)
+    return \"ble 0(%%sr4,%r1)\;copy %%r31,%%r2\";
+
   /* Yuk!  bl may not be able to reach $$dyncall.  */
-  if (TARGET_LONG_CALLS)
+  if (TARGET_PORTABLE_RUNTIME || TARGET_MILLICODE_LONG_CALLS)
     return \"copy %r1,%%r22\;ldil L%%$$dyncall,%%r31\;ldo R%%$$dyncall(%%r31),%%r31\;blr 0,%%r2\;bv,n 0(%%r31)\;nop\";
   else
     return \"copy %r1,%%r22\;.CALL\\tARGW0=GR\;bl $$dyncall,%%r31\;copy %%r31,%%r2\";
 }"
   [(set_attr "type" "dyncall")
-   (set (attr "length") (if_then_else (ne (symbol_ref "TARGET_LONG_CALLS")
-					  (const_int 0))
-				      (const_int 12)
-				      (const_int 24)))])
+   (set (attr "length")
+     (if_then_else (and (eq (symbol_ref "TARGET_PORTABLE_RUNTIME")
+			    (const_int 0))
+			(eq (symbol_ref "TARGET_MILLICODE_LONG_CALLS")
+			    (const_int 0)))
+		   (const_int 12)
+		   (const_int 24)))])
 
 ;; Call subroutine returning any type.
 
@@ -3281,14 +3737,17 @@
 (define_insn "nop"
   [(const_int 0)]
   ""
-  "nop")
+  "nop"
+  [(set_attr "type" "move")
+   (set_attr "length" "4")])
 
 ;;; Hope this is only within a function...
 (define_insn "indirect_jump"
   [(set (pc) (match_operand:SI 0 "register_operand" "r"))]
   ""
   "bv%* 0(%0)"
-  [(set_attr "type" "branch")])
+  [(set_attr "type" "branch")
+   (set_attr "length" "4")])
 
 (define_insn "extzv"
   [(set (match_operand:SI 0 "register_operand" "=r")
@@ -3296,7 +3755,9 @@
 			 (match_operand:SI 2 "uint5_operand" "")
 			 (match_operand:SI 3 "uint5_operand" "")))]
   ""
-  "extru %1,%3+%2-1,%2,%0")
+  "extru %1,%3+%2-1,%2,%0"
+  [(set_attr "type" "shift")
+   (set_attr "length" "4")])
 
 (define_insn ""
   [(set (match_operand:SI 0 "register_operand" "=r")
@@ -3304,7 +3765,9 @@
 			 (const_int 1)
 			 (match_operand:SI 3 "register_operand" "q")))]
   ""
-  "vextru %1,1,%0")
+  "vextru %1,1,%0"
+  [(set_attr "type" "shift")
+   (set_attr "length" "4")])
 
 (define_insn "extv"
   [(set (match_operand:SI 0 "register_operand" "=r")
@@ -3312,7 +3775,9 @@
 			 (match_operand:SI 2 "uint5_operand" "")
 			 (match_operand:SI 3 "uint5_operand" "")))]
   ""
-  "extrs %1,%3+%2-1,%2,%0")
+  "extrs %1,%3+%2-1,%2,%0"
+  [(set_attr "type" "shift")
+   (set_attr "length" "4")])
 
 (define_insn ""
   [(set (match_operand:SI 0 "register_operand" "=r")
@@ -3320,7 +3785,9 @@
 			 (const_int 1)
 			 (match_operand:SI 3 "register_operand" "q")))]
   ""
-  "vextrs %1,1,%0")
+  "vextrs %1,1,%0"
+  [(set_attr "type" "shift")
+   (set_attr "length" "4")])
 
 (define_insn "insv"
   [(set (zero_extract:SI (match_operand:SI 0 "register_operand" "+r,r")
@@ -3330,7 +3797,9 @@
   ""
   "@
    dep %3,%2+%1-1,%1,%0
-   depi %3,%2+%1-1,%1,%0")
+   depi %3,%2+%1-1,%1,%0"
+  [(set_attr "type" "shift,shift")
+   (set_attr "length" "4,4")])
 
 ;; Optimize insertion of const_int values of type 1...1xxxx.
 (define_insn ""
@@ -3344,7 +3813,9 @@
 {
   operands[3] = GEN_INT ((INTVAL (operands[3]) & 0xf) - 0x10);
   return \"depi %3,%2+%1-1,%1,%0\";
-}")
+}"
+  [(set_attr "type" "shift")
+   (set_attr "length" "4")])
 
 ;; This insn is used for some loop tests, typically loops reversed when
 ;; strength reduction is used.  It is actually created when the instruction
@@ -3656,7 +4127,8 @@
    (use (mem:SI (match_operand:SI 1 "register_operand" "r")))]
   ""
   "fdc 0(0,%0)\;fdc 0(0,%1)\;sync"
-  [(set_attr "length" "12")])
+  [(set_attr "type" "multi")
+   (set_attr "length" "12")])
 
 (define_insn "icacheflush"
   [(unspec_volatile [(const_int 2)] 0)
@@ -3667,4 +4139,5 @@
    (clobber (match_operand:SI 4 "register_operand" "=&r"))]
   ""
   "mfsp %%sr0,%4\;ldsid (0,%2),%3\;mtsp %3,%%sr0\;fic 0(%%sr0,%0)\;fic 0(%%sr0,%1)\;sync\;mtsp %4,%%sr0\;nop\;nop\;nop\;nop\;nop\;nop"
-  [(set_attr "length" "52")])
+  [(set_attr "type" "multi")
+   (set_attr "length" "52")])