![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to romp.h CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [GCC 2.x] / gcc / config|
Return to romp.h CVS log | Up to [GCC 2.x] / gcc / config |
1.1 root 1: /* Definitions of target machine for GNU compiler, for ROMP chip.
2: Copyright (C) 1989, 1991 Free Software Foundation, Inc.
3: Contributed by Richard Kenner ([email protected])
4:
5: This file is part of GNU CC.
6:
7: GNU CC is free software; you can redistribute it and/or modify
8: it under the terms of the GNU General Public License as published by
9: the Free Software Foundation; either version 2, or (at your option)
10: any later version.
11:
12: GNU CC is distributed in the hope that it will be useful,
13: but WITHOUT ANY WARRANTY; without even the implied warranty of
14: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15: GNU General Public License for more details.
16:
17: You should have received a copy of the GNU General Public License
18: along with GNU CC; see the file COPYING. If not, write to
19: the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
20:
21:
22: /* Names to predefine in the preprocessor for this target machine. */
23:
24: #define CPP_PREDEFINES "-Dibm032 -Dunix"
25:
26: /* Print subsidiary information on the compiler version in use. */
27: #define TARGET_VERSION ;
28:
29: /* Add -lfp_p when running with -p or -pg. */
30: #define LIB_SPEC "%{pg:-lfp_p}%{p:-lfp_p} %{!p:%{!pg:-lc}}%{p:-lc_p}%{pg:-lc_p}"
31:
32: /* Run-time compilation parameters selecting different hardware subsets. */
33:
34: /* Flag to generate all multiplies as an in-line sequence of multiply-step
35: insns instead of calling a library routine. */
36: #define TARGET_IN_LINE_MUL (target_flags & 1)
37:
38: /* Flag to generate padded floating-point data blocks. Otherwise, we generate
39: them the minimum size. This trades off execution speed against size. */
40: #define TARGET_FULL_FP_BLOCKS (target_flags & 2)
41:
42: /* Flag to pass and return floating point values in floating point registers.
43: Since this violates the linkage convention, we feel free to destroy fr2
44: and fr3 on function calls.
45: fr1-fr3 are used to pass the arguments. */
46: #define TARGET_FP_REGS (target_flags & 4)
47:
48: /* Flag to return structures of more than one word in memory. This is for
49: compatibility with the MetaWare HighC (hc) compiler. */
50: #define TARGET_HC_STRUCT_RETURN (target_flags & 010)
51:
52: extern int target_flags;
53:
54: /* Macro to define tables used to set the flags.
55: This is a list in braces of pairs in braces,
56: each pair being { "NAME", VALUE }
57: where VALUE is the bits to set or minus the bits to clear.
58: An empty string NAME is used to identify the default VALUE. */
59:
60: #define TARGET_SWITCHES \
61: { {"in-line-mul", 1}, \
62: {"call-lib-mul", -1}, \
63: {"full-fp-blocks", 2}, \
64: {"minimum-fp-blocks", -2}, \
65: {"fp-arg-in-fpregs", 4}, \
66: {"fp-arg-in-gregs", -4}, \
67: {"hc-struct-return", 010}, \
68: {"nohc-struct-return", - 010}, \
69: { "", TARGET_DEFAULT}}
70:
71: #define TARGET_DEFAULT 3
72:
73: /* Define this to change the optimizations peformed by default.
74:
75: This used to depend on the value of write_symbols,
76: but that is contrary to the general plan for GCC options. */
77:
78: #define OPTIMIZATION_OPTIONS(LEVEL) \
79: { \
80: if ((LEVEL) > 0) \
81: { \
82: flag_force_addr = 1; \
83: flag_force_mem = 1; \
84: } \
85: }
86:
87: /* target machine storage layout */
88:
89: /* Define this if most significant bit is lowest numbered
90: in instructions that operate on numbered bit-fields. */
91: /* That is true on ROMP. */
92: #define BITS_BIG_ENDIAN 1
93:
94: /* Define this if most significant byte of a word is the lowest numbered. */
95: /* That is true on ROMP. */
96: #define BYTES_BIG_ENDIAN 1
97:
98: /* Define this if most significant word of a multiword number is lowest
99: numbered.
100:
101: For ROMP we can decide arbitrarily since there are no machine instructions
102: for them. Might as well be consistent with bits and bytes. */
103: #define WORDS_BIG_ENDIAN 1
104:
105: /* number of bits in an addressible storage unit */
106: #define BITS_PER_UNIT 8
107:
108: /* Width in bits of a "word", which is the contents of a machine register.
109: Note that this is not necessarily the width of data type `int';
110: if using 16-bit ints on a 68000, this would still be 32.
111: But on a machine with 16-bit registers, this would be 16. */
112: #define BITS_PER_WORD 32
113:
114: /* Width of a word, in units (bytes). */
115: #define UNITS_PER_WORD 4
116:
117: /* Width in bits of a pointer.
118: See also the macro `Pmode' defined below. */
119: #define POINTER_SIZE 32
120:
121: /* Allocation boundary (in *bits*) for storing arguments in argument list. */
122: #define PARM_BOUNDARY 32
123:
124: /* Boundary (in *bits*) on which stack pointer should be aligned. */
125: #define STACK_BOUNDARY 32
126:
127: /* Allocation boundary (in *bits*) for the code of a function. */
128: #define FUNCTION_BOUNDARY 16
129:
130: /* No data type wants to be aligned rounder than this. */
131: #define BIGGEST_ALIGNMENT 32
132:
133: /* Alignment of field after `int : 0' in a structure. */
134: #define EMPTY_FIELD_BOUNDARY 32
135:
136: /* Every structure's size must be a multiple of this. */
137: #define STRUCTURE_SIZE_BOUNDARY 8
138:
139: /* A bitfield declared as `int' forces `int' alignment for the struct. */
140: #define PCC_BITFIELD_TYPE_MATTERS 1
141:
142: /* Make strings word-aligned so strcpy from constants will be faster. */
143: #define CONSTANT_ALIGNMENT(EXP, ALIGN) \
144: (TREE_CODE (EXP) == STRING_CST \
145: && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN))
146:
147: /* Make arrays of chars word-aligned for the same reasons. */
148: #define DATA_ALIGNMENT(TYPE, ALIGN) \
149: (TREE_CODE (TYPE) == ARRAY_TYPE \
150: && TYPE_MODE (TREE_TYPE (TYPE)) == QImode \
151: && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN))
152:
153: /* Define this if move instructions will actually fail to work
154: when given unaligned data. */
155: #define STRICT_ALIGNMENT
156:
157: /* Standard register usage. */
158:
159: /* Number of actual hardware registers.
160: The hardware registers are assigned numbers for the compiler
161: from 0 to just below FIRST_PSEUDO_REGISTER.
162: All registers that the compiler knows about must be given numbers,
163: even those that are not normally considered general registers.
164:
165: ROMP has 16 fullword registers and 8 floating point registers.
166:
167: In addition, the difference between the frame and argument pointers is
168: a function of the number of registers saved, so we need to have a register
169: to use for AP that will later be eliminated in favor of sp or fp. This is
170: a normal register, but it is fixed. */
171:
172: #define FIRST_PSEUDO_REGISTER 25
173:
174: /* 1 for registers that have pervasive standard uses
175: and are not available for the register allocator.
176:
177: On ROMP, r1 is used for the stack and r14 is used for a
178: data area pointer.
179:
180: HACK WARNING: On the RT, there is a bug in code generation for
181: the MC68881 when the first and third operands are the same floating-point
182: register. See the definition of the FINAL_PRESCAN_INSN macro for details.
183: Here we need to reserve fr0 for this purpose. */
184: #define FIXED_REGISTERS \
185: {0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
186: 1, \
187: 1, 0, 0, 0, 0, 0, 0, 0}
188:
189: /* 1 for registers not available across function calls.
190: These must include the FIXED_REGISTERS and also any
191: registers that can be used without being saved.
192: The latter must include the registers where values are returned
193: and the register where structure-value addresses are passed.
194: Aside from that, you can include as many other registers as you like. */
195: #define CALL_USED_REGISTERS \
196: {1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
197: 1, \
198: 1, 1, 0, 0, 0, 0, 0, 0}
199:
200: /* List the order in which to allocate registers. Each register must be
201: listed once, even those in FIXED_REGISTERS.
202:
203: We allocate in the following order:
204: fr0, fr1 (not saved)
205: fr2 ... fr6
206: fr7 (more expensive for some FPA's)
207: r0 (not saved and won't conflict with parameter register)
208: r4, r3, r2 (not saved, highest used first to make less conflict)
209: r5 (not saved, but forces r6 to be saved if DI/DFmode)
210: r15, r14, r13, r12, r11, r10, r9, r8, r7, r6 (less to save)
211: r1, ap */
212:
213: #define REG_ALLOC_ORDER \
214: {17, 18, \
215: 19, 20, 21, 22, 23, \
216: 24, \
217: 0, \
218: 4, 3, 2, \
219: 5, \
220: 15, 14, 13, 12, 11, 10, \
221: 9, 8, 7, 6, \
222: 1, 16}
223:
224: /* True if register is floating-point. */
225: #define FP_REGNO_P(N) ((N) >= 17)
226:
227: /* Return number of consecutive hard regs needed starting at reg REGNO
228: to hold something of mode MODE.
229: This is ordinarily the length in words of a value of mode MODE
230: but can be less for certain modes in special long registers.
231:
232: On ROMP, ordinary registers hold 32 bits worth;
233: a single floating point register is always enough for
234: anything that can be stored in them at all. */
235: #define HARD_REGNO_NREGS(REGNO, MODE) \
236: (FP_REGNO_P (REGNO) ? GET_MODE_NUNITS (MODE) \
237: : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD))
238:
239: /* Value is 1 if hard register REGNO can hold a value of machine-mode MODE.
240: On ROMP, the cpu registers can hold any mode but the float registers
241: can hold only floating point. */
242: #define HARD_REGNO_MODE_OK(REGNO, MODE) \
243: (! FP_REGNO_P (REGNO) || GET_MODE_CLASS (MODE) == MODE_FLOAT \
244: || GET_MODE_CLASS (MODE) == MODE_COMPLEX_FLOAT)
245:
246: /* Value is 1 if it is a good idea to tie two pseudo registers
247: when one has mode MODE1 and one has mode MODE2.
248: If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
249: for any hard reg, then this must be 0 for correct output. */
250: #define MODES_TIEABLE_P(MODE1, MODE2) \
251: ((GET_MODE_CLASS (MODE1) == MODE_FLOAT \
252: || GET_MODE_CLASS (MODE1) == MODE_COMPLEX_FLOAT) \
253: == (GET_MODE_CLASS (MODE2) == MODE_FLOAT \
254: || GET_MODE_CLASS (MODE2) == MODE_COMPLEX_FLOAT))
255:
256: /* A C expression returning the cost of moving data from a register of class
257: CLASS1 to one of CLASS2.
258:
259: On the ROMP, access to floating-point registers is expensive (even between
260: two FP regs.) */
261: #define REGISTER_MOVE_COST(CLASS1, CLASS2) \
262: (2 + 10 * ((CLASS1) == FP_REGS) + 10 * (CLASS2 == FP_REGS))
263:
264: /* Specify the registers used for certain standard purposes.
265: The values of these macros are register numbers. */
266:
267: /* ROMP pc isn't overloaded on a register that the compiler knows about. */
268: /* #define PC_REGNUM */
269:
270: /* Register to use for pushing function arguments. */
271: #define STACK_POINTER_REGNUM 1
272:
273: /* Base register for access to local variables of the function. */
274: #define FRAME_POINTER_REGNUM 13
275:
276: /* Value should be nonzero if functions must have frame pointers.
277: Zero means the frame pointer need not be set up (and parms
278: may be accessed via the stack pointer) in functions that seem suitable.
279: This is computed in `reload', in reload1.c. */
280: #define FRAME_POINTER_REQUIRED 0
281:
282: /* Base register for access to arguments of the function. */
283: #define ARG_POINTER_REGNUM 16
284:
285: /* Place to put static chain when calling a function that requires it. */
286: #define STATIC_CHAIN \
287: gen_rtx (MEM, Pmode, gen_rtx (PLUS, Pmode, stack_pointer_rtx, \
288: gen_rtx (CONST_INT, VOIDmode, -36)))
289:
290: /* Place where static chain is found upon entry to routine. */
291: #define STATIC_CHAIN_INCOMING \
292: gen_rtx (MEM, Pmode, gen_rtx (PLUS, Pmode, arg_pointer_rtx, \
293: gen_rtx (CONST_INT, VOIDmode, -20)))
294:
295: /* Place that structure value return address is placed.
296:
297: On the ROMP, it is passed as an extra parameter. */
298: #define STRUCT_VALUE 0
299:
300: /* Define the classes of registers for register constraints in the
301: machine description. Also define ranges of constants.
302:
303: One of the classes must always be named ALL_REGS and include all hard regs.
304: If there is more than one class, another class must be named NO_REGS
305: and contain no registers.
306:
307: The name GENERAL_REGS must be the name of a class (or an alias for
308: another name such as ALL_REGS). This is the class of registers
309: that is allowed by "g" or "r" in a register constraint.
310: Also, registers outside this class are allocated only when
311: instructions express preferences for them.
312:
313: The classes must be numbered in nondecreasing order; that is,
314: a larger-numbered class must never be contained completely
315: in a smaller-numbered class.
316:
317: For any two classes, it is very desirable that there be another
318: class that represents their union. */
319:
320: /* The ROMP has two types of registers, general and floating-point.
321:
322: However, r0 is special in that it cannot be used as a base register.
323: So make a class for registers valid as base registers.
324:
325: For floating-point support, add classes that just consist of r0 and
326: r15, respectively. */
327:
328: enum reg_class { NO_REGS, R0_REGS, R15_REGS, BASE_REGS, GENERAL_REGS,
329: FP_REGS, ALL_REGS, LIM_REG_CLASSES };
330:
331: #define N_REG_CLASSES (int) LIM_REG_CLASSES
332:
333: /* Give names of register classes as strings for dump file. */
334:
335: #define REG_CLASS_NAMES \
336: {"NO_REGS", "R0_REGS", "R15_REGS", "BASE_REGS", "GENERAL_REGS", \
337: "FP_REGS", "ALL_REGS" }
338:
339: /* Define which registers fit in which classes.
340: This is an initializer for a vector of HARD_REG_SET
341: of length N_REG_CLASSES. */
342:
343: #define REG_CLASS_CONTENTS {0, 0x00001, 0x08000, 0x1fffe, 0x1ffff, \
344: 0x1fe0000, 0x1ffffff }
345:
346: /* The same information, inverted:
347: Return the class number of the smallest class containing
348: reg number REGNO. This could be a conditional expression
349: or could index an array. */
350:
351: #define REGNO_REG_CLASS(REGNO) \
352: ((REGNO) == 0 ? GENERAL_REGS : FP_REGNO_P (REGNO) ? FP_REGS : BASE_REGS)
353:
354: /* The class value for index registers, and the one for base regs. */
355: #define INDEX_REG_CLASS BASE_REGS
356: #define BASE_REG_CLASS BASE_REGS
357:
358: /* Get reg_class from a letter such as appears in the machine description. */
359:
360: #define REG_CLASS_FROM_LETTER(C) \
361: ((C) == 'f' ? FP_REGS \
362: : (C) == 'b' ? BASE_REGS \
363: : (C) == 'z' ? R0_REGS \
364: : (C) == 't' ? R15_REGS \
365: : NO_REGS)
366:
367: /* The letters I, J, K, L, M, N, and P in a register constraint string
368: can be used to stand for particular ranges of immediate operands.
369: This macro defines what the ranges are.
370: C is the letter, and VALUE is a constant value.
371: Return 1 if VALUE is in the range specified by C.
372:
373: `I' is constants less than 16
374: `J' is negative constants greater than -16
375: `K' is the range for a normal D insn.
376: `L' is a constant with only the low-order 16 bits set
377: `M' is a constant with only the high-order 16 bits set
378: `N' is a single-bit constant
379: `O' is a constant with either the high-order or low-order 16 bits all ones
380: `P' is the complement of a single-bit constant
381: */
382:
383: #define CONST_OK_FOR_LETTER_P(VALUE, C) \
384: ( (C) == 'I' ? (unsigned) (VALUE) < 0x10 \
385: : (C) == 'J' ? (VALUE) < 0 && (VALUE) > -16 \
386: : (C) == 'K' ? (unsigned) ((VALUE) + 0x8000) < 0x10000 \
387: : (C) == 'L' ? ((VALUE) & 0xffff0000) == 0 \
388: : (C) == 'M' ? ((VALUE) & 0xffff) == 0 \
389: : (C) == 'N' ? exact_log2 (VALUE) >= 0 \
390: : (C) == 'O' ? ((VALUE) & 0xffff) == 0xffff \
391: || ((VALUE) & 0xffff0000) == 0xffff0000 \
392: : (C) == 'P' ? exact_log2 (~ (VALUE)) >= 0 \
393: : 0)
394:
395: /* Similar, but for floating constants, and defining letters G and H.
396: Here VALUE is the CONST_DOUBLE rtx itself.
397: No floating-point constants on ROMP. */
398:
399: #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) 0
400:
401: /* Optional extra constraints for this machine.
402:
403: For the ROMP, `Q' means that this is a memory operand but not a symbolic
404: memory operand. Note that an unassigned pseudo register is such a
405: memory operand. If register allocation has not been done, we reject
406: pseudos, since we assume (hope) that they will get hard registers.
407:
408: `R' means that this is a constant pool reference to the current function.
409: This is just r14 and so can be treated as a register. We bother with this
410: just in move insns as that is the only place it is likely to occur.
411:
412: `S' means that this is the address of a constant pool location. This is
413: equal to r14 plus a constant. We also only check for this in move insns. */
414:
415: #define EXTRA_CONSTRAINT(OP, C) \
416: ((C) == 'Q' ? \
417: ((GET_CODE (OP) == REG \
418: && REGNO (OP) >= FIRST_PSEUDO_REGISTER \
419: && reg_renumber != 0 \
420: && reg_renumber[REGNO (OP)] < 0) \
421: || (memory_operand (OP, VOIDmode) \
422: && ! symbolic_memory_operand (OP, VOIDmode))) \
423: : (C) == 'R' ? current_function_operand (OP, VOIDmode) \
424: : (C) == 'S' ? constant_pool_address_operand (OP, VOIDmode) \
425: : 0)
426:
427: /* Given an rtx X being reloaded into a reg required to be
428: in class CLASS, return the class of reg to actually use.
429: In general this is just CLASS; but on some machines
430: in some cases it is preferable to use a more restrictive class.
431:
432: For the ROMP, if X is a memory reference that involves a symbol,
433: we must use a BASE_REGS register instead of GENERAL_REGS
434: to do the reload. The argument of MEM be either REG, PLUS, or SYMBOL_REF
435: to be valid, so we assume that this is the case.
436:
437: Also, if X is an integer class, ensure that floating-point registers
438: aren't used. */
439:
440: #define PREFERRED_RELOAD_CLASS(X,CLASS) \
441: ((CLASS) == FP_REGS && GET_MODE_CLASS (GET_MODE (X)) == MODE_INT \
442: ? GENERAL_REGS : \
443: (CLASS) != GENERAL_REGS ? (CLASS) : \
444: GET_CODE (X) != MEM ? GENERAL_REGS : \
445: GET_CODE (XEXP (X, 0)) == SYMBOL_REF ? BASE_REGS : \
446: GET_CODE (XEXP (X, 0)) == LABEL_REF ? BASE_REGS : \
447: GET_CODE (XEXP (X, 0)) == CONST ? BASE_REGS : \
448: GET_CODE (XEXP (X, 0)) == REG ? GENERAL_REGS : \
449: GET_CODE (XEXP (X, 0)) != PLUS ? GENERAL_REGS : \
450: GET_CODE (XEXP (XEXP (X, 0), 1)) == SYMBOL_REF ? BASE_REGS : \
451: GET_CODE (XEXP (XEXP (X, 0), 1)) == LABEL_REF ? BASE_REGS : \
452: GET_CODE (XEXP (XEXP (X, 0), 1)) == CONST ? BASE_REGS : GENERAL_REGS)
453:
454: /* Return the register class of a scratch register needed to store into
455: OUT from a register of class CLASS in MODE.
456:
457: On the ROMP, we cannot store into a symbolic memory address from an
458: integer register; we need a BASE_REGS register as a scratch to do it. */
459:
460: #define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS, MODE, OUT) \
461: (GET_MODE_CLASS (MODE) == MODE_INT && symbolic_memory_operand (OUT, MODE) \
462: ? BASE_REGS : NO_REGS)
463:
464: /* Return the maximum number of consecutive registers
465: needed to represent mode MODE in a register of class CLASS.
466:
467: On ROMP, this is the size of MODE in words,
468: except in the FP regs, where a single reg is always enough. */
469: #define CLASS_MAX_NREGS(CLASS, MODE) \
470: ((CLASS) == FP_REGS ? 1 \
471: : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD))
472:
473: /* Stack layout; function entry, exit and calling. */
474:
475: /* Define this if pushing a word on the stack
476: makes the stack pointer a smaller address. */
477: #define STACK_GROWS_DOWNWARD
478:
479: /* Define this if the nominal address of the stack frame
480: is at the high-address end of the local variables;
481: that is, each additional local variable allocated
482: goes at a more negative offset in the frame. */
483: #define FRAME_GROWS_DOWNWARD
484:
485: /* Offset within stack frame to start allocating local variables at.
486: If FRAME_GROWS_DOWNWARD, this is the offset to the END of the
487: first local allocated. Otherwise, it is the offset to the BEGINNING
488: of the first local allocated.
489: On the ROMP, if we set the frame pointer to 15 words below the highest
490: address of the highest local variable, the first 16 words will be
491: addressable via D-short insns. */
492: #define STARTING_FRAME_OFFSET 64
493:
494: /* If we generate an insn to push BYTES bytes,
495: this says how many the stack pointer really advances by.
496: On ROMP, don't define this because there are no push insns. */
497: /* #define PUSH_ROUNDING(BYTES) */
498:
499: /* Offset of first parameter from the argument pointer register value.
500: On the ROMP, we define the argument pointer to the start of the argument
501: area. */
502: #define FIRST_PARM_OFFSET(FNDECL) 0
503:
504: /* Define this if stack space is still allocated for a parameter passed
505: in a register. The value is the number of bytes. */
506: #define REG_PARM_STACK_SPACE(FNDECL) 16
507:
508: /* This is the difference between the logical top of stack and the actual sp.
509:
510: For the ROMP, sp points past the words allocated for the first four outgoing
511: arguments (they are part of the callee's frame). */
512: #define STACK_POINTER_OFFSET -16
513:
514: /* Define this if the maximum size of all the outgoing args is to be
515: accumulated and pushed during the prologue. The amount can be
516: found in the variable current_function_outgoing_args_size. */
517: #define ACCUMULATE_OUTGOING_ARGS
518:
519: /* Value is the number of bytes of arguments automatically
520: popped when returning from a subroutine call.
521: FUNTYPE is the data type of the function (as a tree),
522: or for a library call it is an identifier node for the subroutine name.
523: SIZE is the number of bytes of arguments passed on the stack. */
524:
525: #define RETURN_POPS_ARGS(FUNTYPE,SIZE) 0
526:
527: /* Define how to find the value returned by a function.
528: VALTYPE is the data type of the value (as a tree).
529: If the precise function being called is known, FUNC is its FUNCTION_DECL;
530: otherwise, FUNC is 0.
531:
532: On ROMP the value is found in r2, unless the machine specific option
533: fp-arg-in-fpregs is selected, in which case FP return values are in fr1 */
534:
535: #define FUNCTION_VALUE(VALTYPE, FUNC) \
536: gen_rtx (REG, TYPE_MODE (VALTYPE), \
537: (TARGET_FP_REGS && \
538: GET_MODE_CLASS (TYPE_MODE (VALTYPE)) == MODE_FLOAT) ? 18 : 2)
539:
540: /* Define how to find the value returned by a library function
541: assuming the value has mode MODE. */
542:
543: #define LIBCALL_VALUE(MODE) gen_rtx (REG, MODE, 2)
544:
545: /* The definition of this macro implies that there are cases where
546: a scalar value cannot be returned in registers.
547:
548: For the ROMP, if compatibility with HC is required, anything of
549: type DImode is returned in memory. */
550:
551: #define RETURN_IN_MEMORY(type) \
552: (TARGET_HC_STRUCT_RETURN && TYPE_MODE (type) == DImode)
553:
554: /* 1 if N is a possible register number for a function value
555: as seen by the caller.
556:
557: On ROMP, r2 is the only register thus used unless fp values are to be
558: returned in fp regs, in which case fr1 is also used. */
559:
560: #define FUNCTION_VALUE_REGNO_P(N) ((N) == 2 || ((N) == 18 && TARGET_FP_REGS))
561:
562: /* 1 if N is a possible register number for function argument passing.
563: On ROMP, these are r2-r5 (and fr1-fr4 if fp regs are used). */
564:
565: #define FUNCTION_ARG_REGNO_P(N) \
566: (((N) <= 5 && (N) >= 2) || (TARGET_FP_REGS && (N) > 17 && (N) < 21))
567:
568: /* Define a data type for recording info about an argument list
569: during the scan of that argument list. This data type should
570: hold all necessary information about the function itself
571: and about the args processed so far, enough to enable macros
572: such as FUNCTION_ARG to determine where the next arg should go.
573:
574: On the ROMP, this is a structure. The first word is the number of
575: words of (integer only if -mfp-arg-in-fpregs is specified) arguments
576: scanned so far (including the invisible argument, if any, which holds
577: the structure-value-address). The second word hold the corresponding
578: value for floating-point arguments, except that both single and double
579: count as one register. */
580:
581: struct rt_cargs {int gregs, fregs; };
582: #define CUMULATIVE_ARGS struct rt_cargs
583:
584: #define USE_FP_REG(MODE,CUM) \
585: (TARGET_FP_REGS && GET_MODE_CLASS (MODE) == MODE_FLOAT \
586: && (CUM).fregs < 3)
587:
588: /* Define intermediate macro to compute the size (in registers) of an argument
589: for the ROMP. */
590:
591: #define ROMP_ARG_SIZE(MODE, TYPE, NAMED) \
592: (! (NAMED) ? 0 \
593: : (MODE) != BLKmode \
594: ? (GET_MODE_SIZE (MODE) + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD \
595: : (int_size_in_bytes (TYPE) + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD)
596:
597: /* Initialize a variable CUM of type CUMULATIVE_ARGS
598: for a call to a function whose data type is FNTYPE.
599: For a library call, FNTYPE is 0.
600:
601: On ROMP, the offset normally starts at 0, but starts at 4 bytes
602: when the function gets a structure-value-address as an
603: invisible first argument. */
604:
605: #define INIT_CUMULATIVE_ARGS(CUM,FNTYPE,LIBNAME) \
606: (CUM).gregs = 0, \
607: (CUM).fregs = 0
608:
609: /* Update the data in CUM to advance over an argument
610: of mode MODE and data type TYPE.
611: (TYPE is null for libcalls where that information may not be available.) */
612:
613: #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
614: { if (NAMED) \
615: { \
616: if (USE_FP_REG(MODE, CUM)) \
617: (CUM).fregs++; \
618: else \
619: (CUM).gregs += ROMP_ARG_SIZE (MODE, TYPE, NAMED); \
620: } \
621: }
622:
623: /* Determine where to put an argument to a function.
624: Value is zero to push the argument on the stack,
625: or a hard register in which to store the argument.
626:
627: MODE is the argument's machine mode.
628: TYPE is the data type of the argument (as a tree).
629: This is null for libcalls where that information may
630: not be available.
631: CUM is a variable of type CUMULATIVE_ARGS which gives info about
632: the preceding args and about the function being called.
633: NAMED is nonzero if this argument is a named parameter
634: (otherwise it is an extra parameter matching an ellipsis).
635:
636: On ROMP the first four words of args are normally in registers
637: and the rest are pushed. */
638:
639: #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
640: (! (NAMED) ? 0 \
641: : USE_FP_REG(MODE,CUM) ? gen_rtx(REG, (MODE),(CUM.fregs) + 17) \
642: : (CUM).gregs < 4 ? gen_rtx(REG, (MODE), 2 + (CUM).gregs) : 0)
643:
644: /* For an arg passed partly in registers and partly in memory,
645: this is the number of registers used.
646: For args passed entirely in registers or entirely in memory, zero. */
647:
648: #define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \
649: (! (NAMED) ? 0 \
650: : USE_FP_REG(MODE,CUM) ? 0 \
651: : (((CUM).gregs < 4 \
652: && 4 < ((CUM).gregs + ROMP_ARG_SIZE (MODE, TYPE, NAMED))) \
653: ? 4 - (CUM).gregs : 0))
654:
655: /* Perform any needed actions needed for a function that is receiving a
656: variable number of arguments.
657:
658: CUM is as above.
659:
660: MODE and TYPE are the mode and type of the current parameter.
661:
662: PRETEND_SIZE is a variable that should be set to the amount of stack
663: that must be pushed by the prolog to pretend that our caller pushed
664: it.
665:
666: Normally, this macro will push all remaining incoming registers on the
667: stack and set PRETEND_SIZE to the length of the registers pushed. */
668:
669: #define SETUP_INCOMING_VARARGS(CUM,MODE,TYPE,PRETEND_SIZE,NO_RTL) \
670: { if (TARGET_FP_REGS) \
671: error ("can't have varargs with -mfp-arg-in-fp-regs"); \
672: else if ((CUM).gregs < 4) \
673: { \
674: int first_reg_offset = (CUM).gregs; \
675: \
676: if (MUST_PASS_IN_STACK (MODE, TYPE)) \
677: first_reg_offset += ROMP_ARG_SIZE (TYPE_MODE (TYPE), TYPE, 1); \
678: \
679: if (first_reg_offset > 4) \
680: first_reg_offset = 4; \
681: \
682: if (! NO_RTL && first_reg_offset != 4) \
683: move_block_from_reg \
684: (2 + first_reg_offset, \
685: gen_rtx (MEM, BLKmode, \
686: plus_constant (virtual_incoming_args_rtx, \
687: first_reg_offset * 4)), \
688: 4 - first_reg_offset); \
689: PRETEND_SIZE = (4 - first_reg_offset) * UNITS_PER_WORD; \
690: } \
691: }
692:
693: /* This macro produces the initial definition of a function name.
694: On the ROMP, we need to place an extra '.' in the function name. */
695:
696: #define ASM_DECLARE_FUNCTION_NAME(FILE,NAME,DECL) \
697: { if (TREE_PUBLIC(DECL)) \
698: fprintf (FILE, "\t.globl _.%s\n", NAME); \
699: fprintf (FILE, "_.%s:\n", NAME); \
700: }
701:
702: /* This macro is used to output the start of the data area.
703:
704: On the ROMP, the _name is a pointer to the data area. At that
705: location is the address of _.name, which is really the name of
706: the function. We need to set all this up here.
707:
708: The global declaration of the data area, if needed, is done in
709: `assemble_function', where it thinks it is globalizing the function
710: itself. */
711:
712: #define ASM_OUTPUT_POOL_PROLOGUE(FILE, NAME, DECL, SIZE) \
713: { extern int data_offset; \
714: data_section (); \
715: fprintf (FILE, "\t.align 2\n"); \
716: ASM_OUTPUT_LABEL (FILE, NAME); \
717: fprintf (FILE, "\t.long _.%s, 0, ", NAME); \
718: if (current_function_calls_alloca) \
719: fprintf (FILE, "0x%x\n", \
720: 0xf6900000 + current_function_outgoing_args_size); \
721: else \
722: fprintf (FILE, "0\n"); \
723: data_offset = ((SIZE) + 12 + 3) / 4; \
724: }
725:
726: /* Select section for constant in constant pool.
727:
728: On ROMP, all constants are in the data area. */
729:
730: #define SELECT_RTX_SECTION(MODE, X) data_section ()
731:
732: /* This macro generates the assembly code for function entry.
733: FILE is a stdio stream to output the code to.
734: SIZE is an int: how many units of temporary storage to allocate.
735: Refer to the array `regs_ever_live' to determine which registers
736: to save; `regs_ever_live[I]' is nonzero if register number I
737: is ever used in the function. This macro is responsible for
738: knowing which registers should not be saved even if used. */
739:
740: #define FUNCTION_PROLOGUE(FILE, SIZE) output_prolog (FILE, SIZE)
741:
742: /* Output assembler code to FILE to increment profiler label # LABELNO
743: for profiling a function entry. */
744:
745: #define FUNCTION_PROFILER(FILE, LABELNO) \
746: fprintf(FILE, "\tcas r0,r15,r0\n\tbali r15,mcount\n");
747:
748: /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
749: the stack pointer does not matter. The value is tested only in
750: functions that have frame pointers.
751: No definition is equivalent to always zero. */
752: /* #define EXIT_IGNORE_STACK 1 */
753:
754: /* This macro generates the assembly code for function exit,
755: on machines that need it. If FUNCTION_EPILOGUE is not defined
756: then individual return instructions are generated for each
757: return statement. Args are same as for FUNCTION_PROLOGUE.
758:
759: The function epilogue should not depend on the current stack pointer!
760: It should use the frame pointer only. This is mandatory because
761: of alloca; we also take advantage of it to omit stack adjustments
762: before returning. */
763:
764: #define FUNCTION_EPILOGUE(FILE, SIZE) output_epilog (FILE, SIZE)
765:
766: /* Output assembler code for a block containing the constant parts
767: of a trampoline, leaving space for the variable parts.
768:
769: The trampoline should set the static chain pointer to value placed
770: into the trampoline and should branch to the specified routine.
771:
772: On the ROMP, we have a problem. There are no free registers to use
773: to construct the static chain and function addresses. Hence we use
774: the following kludge: r15 (the return address) is first saved in mq.
775: Then we use r15 to form the function address. We then branch to the
776: function and restore r15 in the delay slot. This makes it appear that
777: the function was called directly from the caller.
778:
779: (Note that the function address built is actually that of the data block.
780: This is passed in r0 and the actual routine address is loaded into r15.)
781:
782: In addition, note that the address of the "called function", in this case
783: the trampoline, is actually the address of the data area. So we need to
784: make a fake data area that will contain the address of the trampoline.
785: Note that this must be defined as two half-words, since the trampoline
786: template (as opposed to the trampoline on the stack) is only half-word
787: aligned. */
788:
789: #define TRAMPOLINE_TEMPLATE(FILE) \
790: { \
791: fprintf (FILE, "\t.short 0,0\n"); \
792: fprintf (FILE, "\tcau r0,0(r0)\n"); \
793: fprintf (FILE, "\toil r0,r0,0\n"); \
794: fprintf (FILE, "\tmts r10,r15\n"); \
795: fprintf (FILE, "\tst r0,-36(r1)\n"); \
796: fprintf (FILE, "\tcau r15,0(r0)\n"); \
797: fprintf (FILE, "\toil r15,r15,0\n"); \
798: fprintf (FILE, "\tcas r0,r15,r0\n"); \
799: fprintf (FILE, "\tls r15,0(r15)\n"); \
800: fprintf (FILE, "\tbrx r15\n"); \
801: fprintf (FILE, "\tmfs r10,r15\n"); \
802: }
803:
804: /* Length in units of the trampoline for entering a nested function. */
805:
806: #define TRAMPOLINE_SIZE 36
807:
808: /* Emit RTL insns to initialize the variable parts of a trampoline.
809: FNADDR is an RTX for the address of the function's pure code.
810: CXT is an RTX for the static chain value for the function.
811:
812: On the RT, the static chain and function addresses are written in
813: two 16-bit sections.
814:
815: We also need to write the address of the first instruction in
816: the trampoline into the first word of the trampoline to simulate a
817: data area. */
818:
819: #define INITIALIZE_TRAMPOLINE(ADDR, FNADDR, CXT) \
820: { \
821: rtx _addr, _temp; \
822: rtx _val; \
823: \
824: _temp = expand_binop (SImode, add_optab, ADDR, \
825: gen_rtx (CONST_INT, VOIDmode, 4), \
826: 0, 1, OPTAB_LIB_WIDEN); \
827: emit_move_insn (gen_rtx (MEM, SImode, \
828: memory_address (SImode, ADDR)), _temp); \
829: \
830: _val = force_reg (SImode, CXT); \
831: _addr = memory_address (HImode, plus_constant (ADDR, 10)); \
832: emit_move_insn (gen_rtx (MEM, HImode, _addr), \
833: gen_lowpart (HImode, _val)); \
834: _temp = expand_shift (RSHIFT_EXPR, SImode, _val, \
835: build_int_2 (16, 0), 0, 1); \
836: _addr = memory_address (HImode, plus_constant (ADDR, 6)); \
837: emit_move_insn (gen_rtx (MEM, HImode, _addr), \
838: gen_lowpart (HImode, _temp)); \
839: \
840: _val = force_reg (SImode, FNADDR); \
841: _addr = memory_address (HImode, plus_constant (ADDR, 24)); \
842: emit_move_insn (gen_rtx (MEM, HImode, _addr), \
843: gen_lowpart (HImode, _val)); \
844: _temp = expand_shift (RSHIFT_EXPR, SImode, _val, \
845: build_int_2 (16, 0), 0, 1); \
846: _addr = memory_address (HImode, plus_constant (ADDR, 20)); \
847: emit_move_insn (gen_rtx (MEM, HImode, _addr), \
848: gen_lowpart (HImode, _temp)); \
849: \
850: }
851:
852: /* Definitions for register eliminations.
853:
854: We have two registers that can be eliminated on the ROMP. First, the
855: frame pointer register can often be eliminated in favor of the stack
856: pointer register. Secondly, the argument pointer register can always be
857: eliminated; it is replaced with either the stack or frame pointer.
858:
859: In addition, we use the elimination mechanism to see if r14 is needed.
860: Initially we assume that it isn't. If it is, we spill it. This is done
861: by making it an eliminable register. It doesn't matter what we replace
862: it with, since it will never occur in the rtl at this point. */
863:
864: /* This is an array of structures. Each structure initializes one pair
865: of eliminable registers. The "from" register number is given first,
866: followed by "to". Eliminations of the same "from" register are listed
867: in order of preference. */
868: #define ELIMINABLE_REGS \
869: {{ FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
870: { ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
871: { ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \
872: { 14, 0}}
873:
874: /* Given FROM and TO register numbers, say whether this elimination is allowed.
875: Frame pointer elimination is automatically handled.
876:
877: For the ROMP, if frame pointer elimination is being done, we would like to
878: convert ap into fp, not sp.
879:
880: We need r14 if various conditions (tested in romp_using_r14) are true.
881:
882: All other eliminations are valid. */
883: #define CAN_ELIMINATE(FROM, TO) \
884: ((FROM) == ARG_POINTER_REGNUM && (TO) == STACK_POINTER_REGNUM \
885: ? ! frame_pointer_needed \
886: : (FROM) == 14 ? ! romp_using_r14 () \
887: : 1)
888:
889: /* Define the offset between two registers, one to be eliminated, and the other
890: its replacement, at the start of a routine. */
891: #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
892: { if ((FROM) == FRAME_POINTER_REGNUM && (TO) == STACK_POINTER_REGNUM) \
893: { \
894: if (romp_pushes_stack ()) \
895: (OFFSET) = ((get_frame_size () - 64) \
896: + current_function_outgoing_args_size); \
897: else \
898: (OFFSET) = - (romp_sa_size () + 64); \
899: } \
900: else if ((FROM) == ARG_POINTER_REGNUM && (TO) == FRAME_POINTER_REGNUM) \
901: (OFFSET) = romp_sa_size () - 16 + 64; \
902: else if ((FROM) == ARG_POINTER_REGNUM && (TO) == STACK_POINTER_REGNUM) \
903: { \
904: if (romp_pushes_stack ()) \
905: (OFFSET) = (get_frame_size () + (romp_sa_size () - 16) \
906: + current_function_outgoing_args_size); \
907: else \
908: (OFFSET) = -16; \
909: } \
910: else if ((FROM) == 14) \
911: (OFFSET) = 0; \
912: else \
913: abort (); \
914: }
915:
916: /* Addressing modes, and classification of registers for them. */
917:
918: /* #define HAVE_POST_INCREMENT */
919: /* #define HAVE_POST_DECREMENT */
920:
921: /* #define HAVE_PRE_DECREMENT */
922: /* #define HAVE_PRE_INCREMENT */
923:
924: /* Macros to check register numbers against specific register classes. */
925:
926: /* These assume that REGNO is a hard or pseudo reg number.
927: They give nonzero only if REGNO is a hard reg of the suitable class
928: or a pseudo reg currently allocated to a suitable hard reg.
929: Since they use reg_renumber, they are safe only once reg_renumber
930: has been allocated, which happens in local-alloc.c. */
931:
932: #define REGNO_OK_FOR_INDEX_P(REGNO) 0
933: #define REGNO_OK_FOR_BASE_P(REGNO) \
934: ((REGNO) < FIRST_PSEUDO_REGISTER \
935: ? (REGNO) < 16 && (REGNO) != 0 && (REGNO) != 16 \
936: : (reg_renumber[REGNO] < 16 && reg_renumber[REGNO] >= 0 \
937: && reg_renumber[REGNO] != 16))
938:
939: /* Maximum number of registers that can appear in a valid memory address. */
940:
941: #define MAX_REGS_PER_ADDRESS 1
942:
943: /* Recognize any constant value that is a valid address. */
944:
945: #define CONSTANT_ADDRESS_P(X) CONSTANT_P (X)
946:
947: /* Nonzero if the constant value X is a legitimate general operand.
948: It is given that X satisfies CONSTANT_P or is a CONST_DOUBLE.
949:
950: On the ROMP, there is a bit of a hack here. Basically, we wish to
951: only issue instructions that are not `as' macros. However, in the
952: case of `get', `load', and `store', if the operand is a relocatable
953: symbol (possibly +/- an integer), there is no way to express the
954: resulting split-relocation except with the macro. Therefore, allow
955: either a constant valid in a normal (sign-extended) D-format insn or
956: a relocatable expression.
957:
958: Also, for DFmode and DImode, we must ensure that both words are
959: addressable.
960:
961: We define two macros: The first is given an offset (0 or 4) and indicates
962: that the operand is a CONST_INT that is valid for that offset. The second
963: indicates a valid non-CONST_INT constant. */
964:
965: #define LEGITIMATE_ADDRESS_INTEGER_P(X,OFFSET) \
966: (GET_CODE (X) == CONST_INT \
967: && (unsigned) (INTVAL (X) + (OFFSET) + 0x8000) < 0x10000)
968:
969: #define LEGITIMATE_ADDRESS_CONSTANT_P(X) \
970: (GET_CODE (X) == SYMBOL_REF \
971: || GET_CODE (X) == LABEL_REF \
972: || (GET_CODE (X) == CONST \
973: && (GET_CODE (XEXP (XEXP (X, 0), 0)) == SYMBOL_REF \
974: || GET_CODE (XEXP (XEXP (X, 0), 0)) == LABEL_REF) \
975: && GET_CODE (XEXP (XEXP (X, 0), 1)) == CONST_INT))
976:
977: /* Include all constant integers and constant double, but exclude
978: SYMBOL_REFs that are to be obtained from the data area (see below). */
979: #define LEGITIMATE_CONSTANT_P(X) \
980: ((LEGITIMATE_ADDRESS_CONSTANT_P (X) \
981: || GET_CODE (X) == CONST_INT \
982: || GET_CODE (X) == CONST_DOUBLE) \
983: && ! (GET_CODE (X) == SYMBOL_REF && SYMBOL_REF_FLAG (X)))
984:
985: /* For no good reason, we do the same as the other RT compilers and load
986: the addresses of data areas for a function from our data area. That means
987: that we need to mark such SYMBOL_REFs. We do so here. */
988: #define ENCODE_SECTION_INFO(DECL) \
989: if (TREE_CODE (TREE_TYPE (DECL)) == FUNCTION_TYPE) \
990: SYMBOL_REF_FLAG (XEXP (DECL_RTL (DECL), 0)) = 1;
991:
992: /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
993: and check its validity for a certain class.
994: We have two alternate definitions for each of them.
995: The usual definition accepts all pseudo regs; the other rejects
996: them unless they have been allocated suitable hard regs.
997: The symbol REG_OK_STRICT causes the latter definition to be used.
998:
999: Most source files want to accept pseudo regs in the hope that
1000: they will get allocated to the class that the insn wants them to be in.
1001: Source files for reload pass need to be strict.
1002: After reload, it makes no difference, since pseudo regs have
1003: been eliminated by then. */
1004:
1005: #ifndef REG_OK_STRICT
1006:
1007: /* Nonzero if X is a hard reg that can be used as an index
1008: or if it is a pseudo reg. */
1009: #define REG_OK_FOR_INDEX_P(X) 0
1010: /* Nonzero if X is a hard reg that can be used as a base reg
1011: or if it is a pseudo reg. */
1012: #define REG_OK_FOR_BASE_P(X) \
1013: (REGNO (X) != 0 && (REGNO (X) < 17 || REGNO (X) >= FIRST_PSEUDO_REGISTER))
1014:
1015: #else
1016:
1017: /* Nonzero if X is a hard reg that can be used as an index. */
1018: #define REG_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X))
1019: /* Nonzero if X is a hard reg that can be used as a base reg. */
1020: #define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X))
1021:
1022: #endif
1023:
1024: /* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression
1025: that is a valid memory address for an instruction.
1026: The MODE argument is the machine mode for the MEM expression
1027: that wants to use this address.
1028:
1029: On the ROMP, a legitimate address is either a legitimate constant,
1030: a register plus a legitimate constant, or a register. See the
1031: discussion at the LEGITIMATE_ADDRESS_CONSTANT_P macro. */
1032: #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
1033: { if (GET_CODE (X) == REG && REG_OK_FOR_BASE_P (X)) \
1034: goto ADDR; \
1035: if (GET_CODE (X) != CONST_INT && LEGITIMATE_ADDRESS_CONSTANT_P (X)) \
1036: goto ADDR; \
1037: if (GET_CODE (X) == PLUS \
1038: && GET_CODE (XEXP (X, 0)) == REG \
1039: && REG_OK_FOR_BASE_P (XEXP (X, 0)) \
1040: && LEGITIMATE_ADDRESS_CONSTANT_P (XEXP (X, 1))) \
1041: goto ADDR; \
1042: if (GET_CODE (X) == PLUS \
1043: && GET_CODE (XEXP (X, 0)) == REG \
1044: && REG_OK_FOR_BASE_P (XEXP (X, 0)) \
1045: && LEGITIMATE_ADDRESS_INTEGER_P (XEXP (X, 1), 0) \
1046: && (((MODE) != DFmode && (MODE) != DImode) \
1047: || (LEGITIMATE_ADDRESS_INTEGER_P (XEXP (X, 1), 4)))) \
1048: goto ADDR; \
1049: }
1050:
1051: /* Try machine-dependent ways of modifying an illegitimate address
1052: to be legitimate. If we find one, return the new, valid address.
1053: This macro is used in only one place: `memory_address' in explow.c.
1054:
1055: OLDX is the address as it was before break_out_memory_refs was called.
1056: In some cases it is useful to look at this to decide what needs to be done.
1057:
1058: MODE and WIN are passed so that this macro can use
1059: GO_IF_LEGITIMATE_ADDRESS.
1060:
1061: It is always safe for this macro to do nothing. It exists to recognize
1062: opportunities to optimize the output.
1063:
1064: On ROMP, check for the sum of a register with a constant
1065: integer that is out of range. If so, generate code to add the
1066: constant with the low-order 16 bits masked to the register and force
1067: this result into another register (this can be done with `cau').
1068: Then generate an address of REG+(CONST&0xffff), allowing for the
1069: possibility of bit 16 being a one.
1070:
1071: If the register is not OK for a base register, abort. */
1072:
1073: #define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \
1074: { if (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 0)) == REG \
1075: && GET_CODE (XEXP (X, 1)) == CONST_INT \
1076: && (unsigned) (INTVAL (XEXP (X, 1)) + 0x8000) >= 0x10000) \
1077: { int high_int, low_int; \
1078: if (! REG_OK_FOR_BASE_P (XEXP (X, 0))) \
1079: abort (); \
1080: high_int = INTVAL (XEXP (X, 1)) >> 16; \
1081: low_int = INTVAL (XEXP (X, 1)) & 0xffff; \
1082: if (low_int & 0x8000) \
1083: high_int += 1, low_int |= 0xffff0000; \
1084: (X) = gen_rtx (PLUS, SImode, \
1085: force_operand \
1086: (gen_rtx (PLUS, SImode, XEXP (X, 0), \
1087: gen_rtx (CONST_INT, VOIDmode, \
1088: high_int << 16)), 0),\
1089: gen_rtx (CONST_INT, VOIDmode, low_int)); \
1090: } \
1091: }
1092:
1093: /* Go to LABEL if ADDR (a legitimate address expression)
1094: has an effect that depends on the machine mode it is used for.
1095:
1096: On the ROMP this is true only if the address is valid with a zero offset
1097: but not with an offset of four (this means it cannot be used as an
1098: address for DImode or DFmode). Since we know it is valid, we just check
1099: for an address that is not valid with an offset of four. */
1100:
1101: #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \
1102: { if (GET_CODE (ADDR) == PLUS \
1103: && ! LEGITIMATE_ADDRESS_CONSTANT_P (XEXP (ADDR, 1)) \
1104: && ! LEGITIMATE_ADDRESS_INTEGER_P (XEXP (ADDR, 1), 4)) \
1105: goto LABEL; \
1106: }
1107:
1108: /* Define this if some processing needs to be done immediately before
1109: emitting code for an insn.
1110:
1111: This is used on the ROMP, to compensate for a bug in the floating-point
1112: code. When a floating-point operation is done with the first and third
1113: operands both the same floating-point register, it will generate bad code
1114: for the MC68881. So we must detect this. If it occurs, we patch the
1115: first operand to be fr0 and insert a move insn to move it to the desired
1116: destination. */
1117: #define FINAL_PRESCAN_INSN(INSN,OPERANDS,NOPERANDS) \
1118: { rtx op0, op1, op2, operation, tem; \
1119: if (NOPERANDS >= 3 && get_attr_type (INSN) == TYPE_FP) \
1120: { \
1121: op0 = OPERANDS[0]; \
1122: operation = OPERANDS[1]; \
1123: if (float_conversion (operation, VOIDmode)) \
1124: operation = XEXP (operation, 0); \
1125: if (float_binary (operation, VOIDmode)) \
1126: { \
1127: op1 = XEXP (operation, 0), op2 = XEXP (operation, 1); \
1128: if (float_conversion (op1, VOIDmode)) \
1129: op1 = XEXP (op1, 0); \
1130: if (float_conversion (op2, VOIDmode)) \
1131: op2 = XEXP (op2, 0); \
1132: if (rtx_equal_p (op0, op2) \
1133: && (GET_CODE (operation) == PLUS \
1134: || GET_CODE (operation) == MULT)) \
1135: tem = op1, op1 = op2, op2 = tem; \
1136: if (GET_CODE (op0) == REG && FP_REGNO_P (REGNO (op0)) \
1137: && GET_CODE (op2) == REG && FP_REGNO_P (REGNO (op2)) \
1138: && REGNO (op0) == REGNO (op2)) \
1139: { \
1140: tem = gen_rtx (REG, GET_MODE (op0), 17); \
1141: emit_insn_after (gen_move_insn (op0, tem), INSN); \
1142: SET_DEST (XVECEXP (PATTERN (INSN), 0, 0)) = tem; \
1143: OPERANDS[0] = tem; \
1144: } \
1145: } \
1146: } \
1147: }
1148:
1149: /* Specify the machine mode that this machine uses
1150: for the index in the tablejump instruction. */
1151: #define CASE_VECTOR_MODE SImode
1152:
1153: /* Define this if the tablejump instruction expects the table
1154: to contain offsets from the address of the table.
1155: Do not define this if the table should contain absolute addresses. */
1156: /* #define CASE_VECTOR_PC_RELATIVE */
1157:
1158: /* Specify the tree operation to be used to convert reals to integers. */
1159: #define IMPLICIT_FIX_EXPR FIX_ROUND_EXPR
1160:
1161: /* This is the kind of divide that is easiest to do in the general case. */
1162: #define EASY_DIV_EXPR TRUNC_DIV_EXPR
1163:
1164: /* Define this as 1 if `char' should by default be signed; else as 0. */
1165: #define DEFAULT_SIGNED_CHAR 0
1166:
1167: /* This flag, if defined, says the same insns that convert to a signed fixnum
1168: also convert validly to an unsigned one.
1169:
1170: We actually lie a bit here as overflow conditions are different. But
1171: they aren't being checked anyway. */
1172:
1173: #define FIXUNS_TRUNC_LIKE_FIX_TRUNC
1174:
1175: /* Max number of bytes we can move from memory to memory
1176: in one reasonably fast instruction. */
1177: #define MOVE_MAX 4
1178:
1179: /* Nonzero if access to memory by bytes is no faster than for words.
1180: Also non-zero if doing byte operations (specifically shifts) in registers
1181: is undesirable. */
1182: #define SLOW_BYTE_ACCESS 1
1183:
1184: /* Define if normal loads of shorter-than-word items from memory clears
1185: the rest of the bigs in the register. */
1186: #define BYTE_LOADS_ZERO_EXTEND
1187:
1188: /* This is BSD, so it wants DBX format. */
1189: #define DBX_DEBUGGING_INFO
1190:
1191: /* We don't have GAS for the RT yet, so don't write out special
1192: .stabs in cc1plus. */
1193:
1194: #define FASCIST_ASSEMBLER
1195:
1196: /* Do not break .stabs pseudos into continuations. */
1197: #define DBX_CONTIN_LENGTH 0
1198:
1199: /* Don't try to use the `x' type-cross-reference character in DBX data.
1200: Also has the consequence of putting each struct, union or enum
1201: into a separate .stabs, containing only cross-refs to the others. */
1202: #define DBX_NO_XREFS
1203:
1204: /* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
1205: is done just by pretending it is already truncated. */
1206: #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
1207:
1208: /* Specify the machine mode that pointers have.
1209: After generation of rtl, the compiler makes no further distinction
1210: between pointers and any other objects of this machine mode. */
1211: #define Pmode SImode
1212:
1213: /* Mode of a function address in a call instruction (for indexing purposes).
1214:
1215: Doesn't matter on ROMP. */
1216: #define FUNCTION_MODE SImode
1217:
1218: /* Define this if addresses of constant functions
1219: shouldn't be put through pseudo regs where they can be cse'd.
1220: Desirable on machines where ordinary constants are expensive
1221: but a CALL with constant address is cheap. */
1222: #define NO_FUNCTION_CSE
1223:
1224: /* Define this if shift instructions ignore all but the low-order
1225: few bits. */
1226: #define SHIFT_COUNT_TRUNCATED
1227:
1228: /* Compute the cost of computing a constant rtl expression RTX
1229: whose rtx-code is CODE. The body of this macro is a portion
1230: of a switch statement. If the code is computed here,
1231: return it with a return statement. Otherwise, break from the switch. */
1232:
1233: #define CONST_COSTS(RTX,CODE) \
1234: case CONST_INT: \
1235: return 0; \
1236: case CONST: \
1237: case LABEL_REF: \
1238: case SYMBOL_REF: \
1239: case CONST_DOUBLE: \
1240: return COSTS_N_INSNS (2);
1241:
1242: /* Provide the costs of a rtl expression. This is in the body of a
1243: switch on CODE.
1244:
1245: References to our own data area are really references to r14, so they
1246: are very cheap. Multiples and divides are very expensive. */
1247:
1248: #define RTX_COSTS(X,CODE) \
1249: case MEM: \
1250: return current_function_operand (X, Pmode) ? 0 : COSTS_N_INSNS (2); \
1251: case MULT: \
1252: return TARGET_IN_LINE_MUL ? COSTS_N_INSNS (19) : COSTS_N_INSNS (25); \
1253: case DIV: \
1254: case UDIV: \
1255: case MOD: \
1256: case UMOD: \
1257: return COSTS_N_INSNS (45);
1258:
1259: /* Compute the cost of an address. This is meant to approximate the size
1260: and/or execution delay of an insn using that address. If the cost is
1261: approximated by the RTL complexity, including CONST_COSTS above, as
1262: is usually the case for CISC machines, this macro should not be defined.
1263: For aggressively RISCy machines, only one insn format is allowed, so
1264: this macro should be a constant. The value of this macro only matters
1265: for valid addresses.
1266:
1267: For the ROMP, everything is cost 0 except for addresses involving
1268: symbolic constants, which are cost 1. */
1269:
1270: #define ADDRESS_COST(RTX) \
1271: ((GET_CODE (RTX) == SYMBOL_REF \
1272: && ! CONSTANT_POOL_ADDRESS_P (RTX)) \
1273: || GET_CODE (RTX) == LABEL_REF \
1274: || (GET_CODE (RTX) == CONST \
1275: && ! constant_pool_address_operand (RTX, Pmode)) \
1276: || (GET_CODE (RTX) == PLUS \
1277: && ((GET_CODE (XEXP (RTX, 1)) == SYMBOL_REF \
1278: && ! CONSTANT_POOL_ADDRESS_P (XEXP (RTX, 0))) \
1279: || GET_CODE (XEXP (RTX, 1)) == LABEL_REF \
1280: || GET_CODE (XEXP (RTX, 1)) == CONST)))
1281:
1282: /* Adjust the length of an INSN. LENGTH is the currently-computed length and
1283: should be adjusted to reflect any required changes. This macro is used when
1284: there is some systematic length adjustment required that would be difficult
1285: to express in the length attribute.
1286:
1287: On the ROMP, there are two adjustments: First, a 2-byte insn in the delay
1288: slot of a CALL (including floating-point operations) actually takes four
1289: bytes. Second, we have to make the worst-case alignment assumption for
1290: address vectors. */
1291:
1292: #define ADJUST_INSN_LENGTH(X,LENGTH) \
1293: if (GET_CODE (X) == INSN && GET_CODE (PATTERN (X)) == SEQUENCE \
1294: && GET_CODE (XVECEXP (PATTERN (X), 0, 0)) != JUMP_INSN \
1295: && get_attr_length (XVECEXP (PATTERN (X), 0, 1)) == 2) \
1296: (LENGTH) += 2; \
1297: else if (GET_CODE (X) == JUMP_INSN && GET_CODE (PATTERN (X)) == ADDR_VEC) \
1298: (LENGTH) += 2;
1299:
1300: /* Tell final.c how to eliminate redundant test instructions. */
1301:
1302: /* Here we define machine-dependent flags and fields in cc_status
1303: (see `conditions.h'). */
1304:
1305: /* Set if condition code (really not-Z) is stored in `test bit'. */
1306: #define CC_IN_TB 01000
1307:
1308: /* Set if condition code is set by an unsigned compare. */
1309: #define CC_UNSIGNED 02000
1310:
1311: /* Store in cc_status the expressions
1312: that the condition codes will describe
1313: after execution of an instruction whose pattern is EXP.
1314: Do not alter them if the instruction would not alter the cc's. */
1315:
1316: #define NOTICE_UPDATE_CC(BODY,INSN) \
1317: update_cc (BODY, INSN)
1318:
1319: /* Control the assembler format that we output. */
1320:
1321: /* Output at beginning of assembler file. */
1322:
1323: #define ASM_FILE_START(FILE) \
1324: { extern char *version_string; \
1325: fprintf (FILE, "\t.globl .oVncs\n\t.set .oVncs,0\n") ; \
1326: fprintf (FILE, "\t.globl .oVgcc%s\n\t.set .oVgcc%s,0\n", \
1327: version_string, version_string); \
1328: }
1329:
1330: /* Output to assembler file text saying following lines
1331: may contain character constants, extra white space, comments, etc. */
1332:
1333: #define ASM_APP_ON ""
1334:
1335: /* Output to assembler file text saying following lines
1336: no longer contain unusual constructs. */
1337:
1338: #define ASM_APP_OFF ""
1339:
1340: /* Output before instructions and read-only data. */
1341:
1342: #define TEXT_SECTION_ASM_OP "\t.text"
1343:
1344: /* Output before writable data. */
1345:
1346: #define DATA_SECTION_ASM_OP "\t.data"
1347:
1348: /* How to refer to registers in assembler output.
1349: This sequence is indexed by compiler's hard-register-number (see above). */
1350:
1351: #define REGISTER_NAMES \
1352: {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", \
1353: "r10", "r11", "r12", "r13", "r14", "r15", "ap", \
1354: "fr0", "fr1", "fr2", "fr3", "fr4", "fr5", "fr6", "fr7" }
1355:
1356: /* How to renumber registers for dbx and gdb. */
1357:
1358: #define DBX_REGISTER_NUMBER(REGNO) (REGNO)
1359:
1360: /* This is how to output the definition of a user-level label named NAME,
1361: such as the label on a static function or variable NAME. */
1362:
1363: #define ASM_OUTPUT_LABEL(FILE,NAME) \
1364: do { assemble_name (FILE, NAME); fputs (":\n", FILE); } while (0)
1365:
1366: /* This is how to output a command to make the user-level label named NAME
1367: defined for reference from other files. */
1368:
1369: #define ASM_GLOBALIZE_LABEL(FILE,NAME) \
1370: do { fputs ("\t.globl ", FILE); assemble_name (FILE, NAME); fputs ("\n", FILE);} while (0)
1371:
1372: /* This is how to output a reference to a user-level label named NAME.
1373: `assemble_name' uses this. */
1374:
1375: #define ASM_OUTPUT_LABELREF(FILE,NAME) \
1376: fprintf (FILE, "_%s", NAME)
1377:
1378: /* This is how to output an internal numbered label where
1379: PREFIX is the class of label and NUM is the number within the class. */
1380:
1381: #define ASM_OUTPUT_INTERNAL_LABEL(FILE,PREFIX,NUM) \
1382: fprintf (FILE, "%s%d:\n", PREFIX, NUM)
1383:
1384: /* This is how to output a label for a jump table. Arguments are the same as
1385: for ASM_OUTPUT_INTERNAL_LABEL, except the insn for the jump table is
1386: passed. */
1387:
1388: #define ASM_OUTPUT_CASE_LABEL(FILE,PREFIX,NUM,TABLEINSN) \
1389: { ASM_OUTPUT_ALIGN (FILE, 2); ASM_OUTPUT_INTERNAL_LABEL (FILE, PREFIX, NUM); }
1390:
1391: /* This is how to store into the string LABEL
1392: the symbol_ref name of an internal numbered label where
1393: PREFIX is the class of label and NUM is the number within the class.
1394: This is suitable for output with `assemble_name'. */
1395:
1396: #define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \
1397: sprintf (LABEL, "*%s%d", PREFIX, NUM)
1398:
1399: /* This is how to output an assembler line defining a `double' constant. */
1400:
1401: #define ASM_OUTPUT_DOUBLE(FILE,VALUE) \
1402: fprintf (FILE, "\t.double 0d%.20e\n", (VALUE))
1403:
1404: /* This is how to output an assembler line defining a `float' constant.
1405:
1406: WARNING: Believe it or not, the ROMP assembler has a bug in its
1407: handling of single-precision floating-point values making it impossible
1408: to output such values in the expected way. Therefore, it must be output
1409: in hex. THIS WILL NOT WORK IF CROSS-COMPILING FROM A MACHINE THAT DOES
1410: NOT USE IEEE-FORMAT FLOATING-POINT, but there is nothing that can be done
1411: about it short of fixing the assembler. */
1412:
1413: #define ASM_OUTPUT_FLOAT(FILE,VALUE) \
1414: do { union { int i; float f; } u_i_f; \
1415: u_i_f.f = (VALUE); \
1416: fprintf (FILE, "\t.long 0x%x\n", u_i_f.i);\
1417: } while (0)
1418:
1419: /* This is how to output an assembler line defining an `int' constant. */
1420:
1421: #define ASM_OUTPUT_INT(FILE,VALUE) \
1422: ( fprintf (FILE, "\t.long "), \
1423: output_addr_const (FILE, (VALUE)), \
1424: fprintf (FILE, "\n"))
1425:
1426: /* Likewise for `char' and `short' constants. */
1427:
1428: #define ASM_OUTPUT_SHORT(FILE,VALUE) \
1429: ( fprintf (FILE, "\t.short "), \
1430: output_addr_const (FILE, (VALUE)), \
1431: fprintf (FILE, "\n"))
1432:
1433: #define ASM_OUTPUT_CHAR(FILE,VALUE) \
1434: ( fprintf (FILE, "\t.byte "), \
1435: output_addr_const (FILE, (VALUE)), \
1436: fprintf (FILE, "\n"))
1437:
1438: /* This is how to output an assembler line for a numeric constant byte. */
1439:
1440: #define ASM_OUTPUT_BYTE(FILE,VALUE) \
1441: fprintf (FILE, "\t.byte 0x%x\n", (VALUE))
1442:
1443: /* This is how to output code to push a register on the stack.
1444: It need not be very fast code. */
1445:
1446: #define ASM_OUTPUT_REG_PUSH(FILE,REGNO) \
1447: fprintf (FILE, "\tsis r1,4\n\tsts %s,0(r1)\n", reg_names[REGNO])
1448:
1449: /* This is how to output an insn to pop a register from the stack.
1450: It need not be very fast code. */
1451:
1452: #define ASM_OUTPUT_REG_POP(FILE,REGNO) \
1453: fprintf (FILE, "\tls r1,0(r1)\n\tais r1,4\n", reg_names[REGNO])
1454:
1455: /* This is how to output an element of a case-vector that is absolute. */
1456:
1457: #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \
1458: fprintf (FILE, "\t.long L%d\n", VALUE)
1459:
1460: /* This is how to output an element of a case-vector that is relative.
1461: (ROMP does not use such vectors,
1462: but we must define this macro anyway.) */
1463:
1464: #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL) abort ()
1465:
1466: /* This is how to output an assembler line
1467: that says to advance the location counter
1468: to a multiple of 2**LOG bytes. */
1469:
1470: #define ASM_OUTPUT_ALIGN(FILE,LOG) \
1471: if ((LOG) != 0) \
1472: fprintf (FILE, "\t.align %d\n", (LOG))
1473:
1474: #define ASM_OUTPUT_SKIP(FILE,SIZE) \
1475: fprintf (FILE, "\t.space %d\n", (SIZE))
1476:
1477: /* This says how to output an assembler line
1478: to define a global common symbol. */
1479:
1480: #define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \
1481: ( fputs (".comm ", (FILE)), \
1482: assemble_name ((FILE), (NAME)), \
1483: fprintf ((FILE), ",%d\n", (SIZE)))
1484:
1485: /* This says how to output an assembler line
1486: to define a local common symbol. */
1487:
1488: #define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE,ROUNDED) \
1489: ( fputs (".lcomm ", (FILE)), \
1490: assemble_name ((FILE), (NAME)), \
1491: fprintf ((FILE), ",%d\n", (SIZE)))
1492:
1493: /* Store in OUTPUT a string (made with alloca) containing
1494: an assembler-name for a local static variable named NAME.
1495: LABELNO is an integer which is different for each call. */
1496:
1497: #define ASM_FORMAT_PRIVATE_NAME(OUTPUT, NAME, LABELNO) \
1498: ( (OUTPUT) = (char *) alloca (strlen ((NAME)) + 10), \
1499: sprintf ((OUTPUT), "%s.%d", (NAME), (LABELNO)))
1500:
1501: /* Define the parentheses used to group arithmetic operations
1502: in assembler code. */
1503:
1504: #define ASM_OPEN_PAREN "("
1505: #define ASM_CLOSE_PAREN ")"
1506:
1507: /* Define results of standard character escape sequences. */
1508: #define TARGET_BELL 007
1509: #define TARGET_BS 010
1510: #define TARGET_TAB 011
1511: #define TARGET_NEWLINE 012
1512: #define TARGET_VT 013
1513: #define TARGET_FF 014
1514: #define TARGET_CR 015
1515:
1516: /* Print operand X (an rtx) in assembler syntax to file FILE.
1517: CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified.
1518: For `%' followed by punctuation, CODE is the punctuation and X is null. */
1519:
1520: #define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE)
1521:
1522: /* Define which CODE values are valid. */
1523:
1524: #define PRINT_OPERAND_PUNCT_VALID_P(CODE) \
1525: ((CODE) == '.' || (CODE) == '#')
1526:
1527: /* Print a memory address as an operand to reference that memory location. */
1528:
1529: #define PRINT_OPERAND_ADDRESS(FILE, ADDR) \
1530: { register rtx addr = ADDR; \
1531: register rtx base = 0, offset = addr; \
1532: if (GET_CODE (addr) == REG) \
1533: base = addr, offset = const0_rtx; \
1534: else if (GET_CODE (addr) == PLUS \
1535: && GET_CODE (XEXP (addr, 0)) == REG) \
1536: base = XEXP (addr, 0), offset = XEXP (addr, 1); \
1537: else if (GET_CODE (addr) == SYMBOL_REF \
1538: && CONSTANT_POOL_ADDRESS_P (addr)) \
1539: { \
1540: offset = gen_rtx (CONST_INT, VOIDmode, get_pool_offset (addr) + 12); \
1541: base = gen_rtx (REG, SImode, 14); \
1542: } \
1543: else if (GET_CODE (addr) == CONST \
1544: && GET_CODE (XEXP (addr, 0)) == PLUS \
1545: && GET_CODE (XEXP (XEXP (addr, 0), 1)) == CONST_INT \
1546: && GET_CODE (XEXP (XEXP (addr, 0), 0)) == SYMBOL_REF \
1547: && CONSTANT_POOL_ADDRESS_P (XEXP (XEXP (addr, 0), 0))) \
1548: { \
1549: offset = plus_constant (XEXP (XEXP (addr, 0), 1), \
1550: (get_pool_offset (XEXP (XEXP (addr, 0), 0)) \
1551: + 12)); \
1552: base = gen_rtx (REG, SImode, 14); \
1553: } \
1554: output_addr_const (FILE, offset); \
1555: if (base) \
1556: fprintf (FILE, "(%s)", reg_names [REGNO (base)]); \
1557: }
1558:
1559: /* Define the codes that are matched by predicates in aux-output.c. */
1560:
1561: #define PREDICATE_CODES \
1562: {"zero_memory_operand", {SUBREG, MEM}}, \
1563: {"short_memory_operand", {SUBREG, MEM}}, \
1564: {"symbolic_memory_operand", {SUBREG, MEM}}, \
1565: {"current_function_operand", {MEM}}, \
1566: {"constant_pool_address_operand", {SUBREG, CONST}}, \
1567: {"romp_symbolic_operand", {LABEL_REF, SYMBOL_REF, CONST}}, \
1568: {"constant_operand", {LABEL_REF, SYMBOL_REF, PLUS, CONST, CONST_INT}}, \
1569: {"reg_or_cint_operand", {SUBREG, REG, CONST_INT}}, \
1570: {"reg_or_any_cint_operand", {SUBREG, REG, CONST_INT}}, \
1571: {"short_cint_operand", {CONST_INT}}, \
1572: {"reg_or_D_operand", {SUBREG, REG, CONST_INT}}, \
1573: {"reg_or_add_operand", {SUBREG, REG, LABEL_REF, SYMBOL_REF, \
1574: PLUS, CONST, CONST_INT}}, \
1575: {"reg_or_and_operand", {SUBREG, REG, CONST_INT}}, \
1576: {"reg_or_mem_operand", {SUBREG, REG, MEM}}, \
1577: {"reg_or_nonsymb_mem_operand", {SUBREG, REG, MEM}}, \
1578: {"romp_operand", {SUBREG, MEM, REG, CONST_INT, CONST, LABEL_REF, \
1579: SYMBOL_REF, CONST_DOUBLE}}, \
1580: {"reg_0_operand", {REG}}, \
1581: {"reg_15_operand", {REG}}, \
1582: {"float_binary", {PLUS, MINUS, MULT, DIV}}, \
1583: {"float_unary", {NEG, ABS}}, \
1584: {"float_conversion", {FLOAT_TRUNCATE, FLOAT_EXTEND, FLOAT, FIX}},
1585:
1586: /* Define functions defined in aux-output.c and used in templates. */
1587:
1588: extern char *output_in_line_mul ();
1589: extern char *output_fpop ();
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.