Return to tm-att386.h CVS log

Up to [GCC 1.x] / gcc / config

Annotation of gcc/config/tm-att386.h, revision 1.1

1.1     ! root        1: /* Definitions for AT&T assembler syntax for the Intel 80386.
        !             2:    Copyright (C) 1988 Free Software Foundation, Inc.
        !             3: 
        !             4: This file is part of GNU CC.
        !             5: 
        !             6: GNU CC is free software; you can redistribute it and/or modify
        !             7: it under the terms of the GNU General Public License as published by
        !             8: the Free Software Foundation; either version 1, or (at your option)
        !             9: any later version.
        !            10: 
        !            11: GNU CC is distributed in the hope that it will be useful,
        !            12: but WITHOUT ANY WARRANTY; without even the implied warranty of
        !            13: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
        !            14: GNU General Public License for more details.
        !            15: 
        !            16: You should have received a copy of the GNU General Public License
        !            17: along with GNU CC; see the file COPYING.  If not, write to
        !            18: the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
        !            19: 
        !            20: 
        !            21: #define TARGET_VERSION fprintf (stderr, " (80386, ATT syntax)");
        !            22: 
        !            23: /* Define the syntax of instructions and addresses.  */
        !            24: 
        !            25: /* Define some concatenation macros to concatenate an opcode
        !            26:    and one, two or three operands.  In other assembler syntaxes
        !            27:    they may alter the order of ther operands.  */
        !            28: 
        !            29: #ifdef __STDC__
        !            30: #define AS2(a,b,c) #a " " #b "," #c
        !            31: #define AS3(a,b,c,d) #a " " #b "," #c "," #d
        !            32: #define AS1(a,b) #a " " #b
        !            33: #else
        !            34: #define AS1(a,b) "a b"
        !            35: #define AS2(a,b,c) "a b,c"
        !            36: #define AS3(a,b,c,d) "a b,c,d"
        !            37: #endif  
        !            38: 
        !            39: /* Output the size-letter for an opcode.
        !            40:    CODE is the letter used in an operand spec (L, B, W, S or Q).
        !            41:    CH is the corresponding lower case letter
        !            42:      (except if CODE is L then CH is `l').  */
        !            43: #define PUT_OP_SIZE(CODE,CH,FILE) putc (CH,(FILE))
        !            44: 
        !            45: /* Opcode suffix for fullword insn.  */
        !            46: #define L_SIZE "l"
        !            47: 
        !            48: /* Prefix for register names in this syntax.  */
        !            49: #define RP "%"
        !            50: 
        !            51: /* Prefix for immediate operands in this syntax.  */
        !            52: #define IP "$"
        !            53: 
        !            54: /* Prefix for internally generated assembler labels.  */
        !            55: #define LPREFIX ".L"
        !            56: 
        !            57: /* Output the prefix for an immediate operand, or for an offset operand.  */
        !            58: #define PRINT_IMMED_PREFIX(FILE)  fputs ("$", (FILE))
        !            59: #define PRINT_OFFSET_PREFIX(FILE)  fputs ("$", (FILE))
        !            60: 
        !            61: /* Indirect call instructions should use `*'.  */
        !            62: #define USE_STAR 1
        !            63: 
        !            64: /* Prefix for a memory-operand X.  */
        !            65: #define PRINT_PTR(X, FILE)
        !            66: 
        !            67: /* Delimiters that surround base reg and index reg.  */
        !            68: #define ADDR_BEG(FILE) putc('(', (FILE))
        !            69: #define ADDR_END(FILE) putc(')', (FILE))
        !            70: 
        !            71: /* Print an index register (whose rtx is IREG).  */
        !            72: #define PRINT_IREG(FILE,IREG) \
        !            73:   do                                                           \
        !            74:   { fputs (",", (FILE)); PRINT_REG ((IREG), 0, (FILE)); }      \
        !            75:   while (0)
        !            76:   
        !            77: /* Print an index scale factor SCALE.  */
        !            78: #define PRINT_SCALE(FILE,SCALE) \
        !            79:   if ((SCALE) != 1) fprintf ((FILE), ",%d", (SCALE))
        !            80: 
        !            81: /* Print a base/index combination.
        !            82:    BREG is the base reg rtx, IREG is the index reg rtx,
        !            83:    and SCALE is the index scale factor (an integer).  */
        !            84: 
        !            85: #define PRINT_B_I_S(BREG,IREG,SCALE,FILE) \
        !            86:   { ADDR_BEG (FILE);                           \
        !            87:     if (BREG) PRINT_REG ((BREG), 0, (FILE));   \
        !            88:     if ((IREG) != 0)                           \
        !            89:       { PRINT_IREG ((FILE), (IREG));           \
        !            90:         PRINT_SCALE ((FILE), (SCALE)); }       \
        !            91:     ADDR_END (FILE); }
        !            92: 
        !            93: /* Define the syntax of pseudo-ops, labels and comments.  */
        !            94: 
        !            95: /* Assembler pseudos to introduce constants of various size.  */
        !            96: 
        !            97: #define ASM_BYTE "\t.byte "
        !            98: #define ASM_SHORT "\t.value "
        !            99: #define ASM_LONG "\t.long "
        !           100: #define ASM_DOUBLE "\t.double "
        !           101: 
        !           102: /* String containing the assembler's comment-starter.  */
        !           103: 
        !           104: #define COMMENT_BEGIN "/"
        !           105: 
        !           106: /* Output at beginning of assembler file.  */
        !           107: /* The .file command should always begin the output.  */
        !           108: 
        !           109: #undef ASM_FILE_START
        !           110: #define ASM_FILE_START(FILE)                           \
        !           111:   do { sdbout_filename ((FILE), main_input_filename);  \
        !           112:        if (optimize) ASM_FILE_START_1 (FILE);          \
        !           113:      } while (0)
        !           114: 
        !           115: #define ASM_FILE_START_1(FILE) fprintf (FILE, "\t.optim\n")
        !           116: 
        !           117: /* Output to assembler file text saying following lines
        !           118:    may contain character constants, extra white space, comments, etc.  */
        !           119: 
        !           120: #define ASM_APP_ON "/APP\n"
        !           121: 
        !           122: /* Output to assembler file text saying following lines
        !           123:    no longer contain unusual constructs.  */
        !           124: 
        !           125: #define ASM_APP_OFF "/NO_APP\n"
        !           126: 
        !           127: /* This is how to output an assembler line
        !           128:    that says to advance the location counter
        !           129:    to a multiple of 2**LOG bytes.  */
        !           130: 
        !           131: #define ASM_OUTPUT_ALIGN(FILE,LOG)     \
        !           132:     if ((LOG)!=0) fprintf ((FILE), "\t.align %d\n", 1<<(LOG))
        !           133: 
        !           134: /* This is how to output an assembler line
        !           135:    that says to advance the location counter by SIZE bytes.  */
        !           136: 
        !           137: #define ASM_OUTPUT_SKIP(FILE,SIZE)  \
        !           138:   fprintf ((FILE), "\t.set .,.+%d\n", (SIZE))
        !           139: 
        !           140: /* Output before read-only data.  */
        !           141: 
        !           142: #define TEXT_SECTION_ASM_OP ".text"
        !           143: 
        !           144: /* Output before writable data.  */
        !           145: 
        !           146: #define DATA_SECTION_ASM_OP ".data"
        !           147: 
        !           148: /* Define the syntax of labels and symbol definitions/declarations.  */
        !           149: 
        !           150: /* This says how to output an assembler line
        !           151:    to define a global common symbol.  */
        !           152: 
        !           153: #define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED)  \
        !           154: ( fputs (".comm ", (FILE)),                    \
        !           155:   assemble_name ((FILE), (NAME)),              \
        !           156:   fprintf ((FILE), ",%d\n", (SIZE)))
        !           157: 
        !           158: /* This says how to output an assembler line
        !           159:    to define a local common symbol.  */
        !           160: 
        !           161: #define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE, ROUNDED)  \
        !           162:   (data_section (),                            \
        !           163:    ASM_OUTPUT_LABEL ((FILE), (NAME)),          \
        !           164:    fprintf ((FILE), "\t.set .,.+%d\n", (SIZE)))
        !           165: 
        !           166: /* This is how to store into the string BUF
        !           167:    the symbol_ref name of an internal numbered label where
        !           168:    PREFIX is the class of label and NUM is the number within the class.
        !           169:    This is suitable for output with `assemble_name'.  */
        !           170: 
        !           171: #define ASM_GENERATE_INTERNAL_LABEL(BUF,PREFIX,NUMBER) \
        !           172:   sprintf ((BUF), ".%s%d", (PREFIX), (NUMBER))
        !           173: 
        !           174: /* This is how to output a reference to a user-level label named NAME.  */
        !           175: 
        !           176: #define ASM_OUTPUT_LABELREF(FILE,NAME) \
        !           177:   fprintf (FILE, "%s", NAME)
        !           178: 
        !           179: /* This is how to output an internal numbered label where
        !           180:    PREFIX is the class of label and NUM is the number within the class.  */
        !           181: 
        !           182: #define ASM_OUTPUT_INTERNAL_LABEL(FILE,PREFIX,NUM)     \
        !           183:   fprintf (FILE, ".%s%d:\n", PREFIX, NUM)
        !           184: 
        !           185: /* This is how to output a command to make the user-level label named NAME
        !           186:    defined for reference from other files.  */
        !           187: 
        !           188: #define ASM_GLOBALIZE_LABEL(FILE,NAME) \
        !           189:   (fputs (".globl ", FILE), assemble_name (FILE, NAME), fputs ("\n", FILE))
        !           190: 
        !           191: /* How to output an ASCII string constant.  */
        !           192: 
        !           193: #define ASM_OUTPUT_ASCII(FILE, p, size) \
        !           194: { int i=0;                                             \
        !           195:   while (i < size)                                     \
        !           196:     { if (i%10 == 0) { if (i!=0) fprintf (FILE, "\n"); \
        !           197:                       fprintf (FILE, ASM_BYTE); }      \
        !           198:       else fprintf (FILE, ",");                                \
        !           199:        fprintf (FILE, "0x%x",(p[i++] & 0377)) ;}       \
        !           200:       fprintf (FILE, "\n"); }

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.