--- gcc/configure	2018/04/24 18:02:06	1.1.1.4
+++ gcc/configure	2018/04/24 18:11:58	1.1.1.6
@@ -1,6 +1,6 @@
 #!/bin/sh
 # Configuration script for GNU CC
-#   Copyright (C) 1988, 1990, 1991, 1992 Free Software Foundation, Inc.
+#   Copyright (C) 1988, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
 
 #This file is part of GNU CC.
 
@@ -28,10 +28,12 @@
 #	   --build=TARGET	specifies configuration of machine you are
 #				using to compile GCC.
 #	   --prefix=DIR		specifies directory to install in.
+#	   --local-prefix=DIR	specifies directory to put local ./include in.
 #	   --exec-prefix=DIR	specifies directory to install executables in.
 #	   --with-gnu-ld	arrange to work with GNU ld.
 #	   --with-gnu-as	arrange to work with GAS.
 #	   --with-stabs		arrange to use stabs instead of host debug format.
+#	   --with-elf		arrange to use elf instead of host debug format.
 #	   --nfp		assume system has no FPU.
 #
 # If configure succeeds, it leaves its status in config.status.
@@ -54,6 +56,14 @@ host=
 
 # Default prefix to /usr/local.
 prefix=/usr/local
+
+# local_prefix specifies where to find the directory /usr/local/include
+# We don't use $(prefix) for this
+# because we always want GCC to search /usr/local/include
+# even if GCC is installed somewhere other than /usr/local.
+# Think THREE TIMES before specifying any other value for this!
+# DO NOT make this use $prefix!
+local_prefix=/usr/local
 # Default is to let the Makefile set exec_prefix from $(prefix)
 exec_prefix='$(prefix)'
 
@@ -97,6 +107,10 @@ do
     prefix=$arg
     next_arg=
     ;;
+  --local-prefix)
+    local_prefix=$arg
+    next_arg=
+    ;;
   --exec-prefix)
     exec_prefix=$arg
     next_arg=
@@ -133,6 +147,15 @@ do
      -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
 	prefix=`echo $arg | sed 's/-*p[a-z]*=//'`
 	;;
+     -local-prefix | --local-prefix | --local-prefi | --local-pref | --local-pre \
+	| --local-pr | --local-p | --local- | --local | --loc | --lo | --l)
+	next_arg=--local-prefix
+	;;
+     -local-prefix=* | --local-prefix=* | --local-prefi=* | --local-pref=* \
+	| --local-pre=* | --local-pr=* | --local-p=* | --local-=* | --local=* \
+	| --loc=* | --lo=* | --l=*)
+	local_prefix=`echo $arg | sed 's/-*l[-a-z]*=//'`
+	;;
      -exec-prefix | --exec-prefix | --exec-prefi | --exec-pref | --exec-pre \
 	| --exec-pr | --exec-p | --exec- | --exec | --exe | --ex | --e)
 	next_arg=--exec-prefix
@@ -157,8 +180,16 @@ do
 	| --stabs | --stab | --sta | --st)
 	stabs=yes
 	;;
+     -with-elf | -with-el | -with-se \
+	| --with-elf | --with-el | --with-e \
+	| -elf | -el | -e \
+	|--elf | --el | --e)
+	elf=yes
+	;;
      -with-* | --with-*) ;; #ignored
+     -enable-* | --enable-*) ;; #ignored
      -x | --x) ;; # ignored
+     --verbose) ;; # ignored for now
      -*)
 	echo "Invalid option \`$arg'" 1>&2
 	exit 1
@@ -206,18 +237,23 @@ fi
 # Complain if an arg is missing
 if [ x$target = x ]
 then
-	echo "No target specified." 1>&2
-
-	echo "\
+	# This way of testing the result of a command substitution is
+	# defined by Posix.2 (section 3.9.1) as well as traditional shells.
+	if target=`${srcdir}/config.guess` ; then
+		echo "Configuring for a ${target} host." 1>&2
+	else
+		echo 'Config.guess failed to determine the host type.  You need to specify one.' 1>&2
+		echo "\
 Usage: `basename $progname` [--host=HOST] [--build=BUILD]
-       [--prefix=DIR] [--exec-pref=DIR]
-       [--with-gnu-as] [--with-gnu-ld] [--with-stabs] [--nfp] TARGET" 1>&2
+       [--prefix=DIR] [--local-pref=DIR] [--exec-pref=DIR]
+       [--with-gnu-as] [--with-gnu-ld] [--with-stabs] [--with-elf] [--nfp] TARGET" 1>&2
 	echo "Where HOST, TARGET and BUILD are three-part configuration names " 1>&2
-	if [ -r config.status ]
-	then
-		tail +2 config.status 1>&2
+		if [ -r config.status ]
+		then
+			tail +2 config.status 1>&2
+		fi
+		exit 1
 	fi
-	exit 1
 fi
 
 # Default other arg
@@ -235,11 +271,13 @@ build_xm_file=
 host_xm_file=
 host_xmake_file=
 host_broken_install=
+host_install_headers_dir=install-headers-tar
+host_truncate_target=
 
 # Validate the specs, and canonicalize them.
-canon_build=`$srcdir/config.sub $build` || exit 1
-canon_host=`$srcdir/config.sub $host` || exit 1
-canon_target=`$srcdir/config.sub $target` || exit 1
+canon_build=`/bin/sh $srcdir/config.sub $build` || exit 1
+canon_host=`/bin/sh $srcdir/config.sub $host` || exit 1
+canon_target=`/bin/sh $srcdir/config.sub $target` || exit 1
 
 # Decode the host machine, then the target machine.
 # For the host machine, we save the xm_file variable as host_xm_file;
@@ -254,6 +292,7 @@ for machine in $canon_build $canon_host
 	xmake_file=
 	tmake_file=
 	header_files=
+	extra_passes=
 	# Set this to force installation and use of collect2.
 	use_collect2=
 	# Set this to override the default target model.
@@ -262,262 +301,391 @@ for machine in $canon_build $canon_host
 	broken_install=
 	# Set this to control which fixincludes program to use.
 	fixincludes=fixincludes
+	# Set this to control how the header file directory is installed.
+	install_headers_dir=install-headers-tar
+	# Set this to a non-empty list of args to pass to cpp if the target
+	# wants its .md file passed through cpp.
+	cpp_md_flags=
+	# Set this if directory names should be truncated to 14 characters.
+	truncate_target=
 
 	case $machine in
 	# Support site-specific machine types.
 	*local*)
-		cpu_type=$machine
-		xm_file=xm-$machine.h
-		tm_file=$machine.h
-		if [ -f $srcdir/config/x-$machine ] ; \
-		then xmake_file=x-$machine; \
+		cpu_type=`echo $machine | sed -e 's/-.*//'`
+		rest=`echo $machine | sed -e "s/$cpu_type-//"`
+		xm_file=${cpu_type}/xm-$rest.h
+		tm_file=${cpu_type}/$rest.h
+		if [ -f $srcdir/config/${cpu_type}/x-$rest ] ; \
+		then xmake_file=${cpu_type}/x-$rest; \
 		else true; \
 		fi
-		if [ -f $srcdir/config/t-$machine ] ; \
-		then tmake_file=t-$machine; \
+		if [ -f $srcdir/config/${cpu_type}/t-$rest ] ; \
+		then tmake_file=${cpu_type}/t-$rest; \
 		else true; \
 		fi
 		;;
 	vax-*-bsd*)			# vaxen running BSD
-		tm_file=vax.h
 		use_collect2=yes
 		;;
 	vax-*-ultrix*)			# vaxen running ultrix
-		tm_file=ultrix.h
+		tm_file=vax/ultrix.h
 		use_collect2=yes
 		;;
 	vax-*-vms*)			# vaxen running VMS
-		xm_file=xm-vax-vms.h
-		tm_file=vax-vms.h
+		xm_file=vax/xm-vms.h
+		tm_file=vax/vms.h
 		;;
 	vax-*-sysv*)			# vaxen running system V
-		xm_file=xm-vaxv.h
-		tm_file=vaxv.h
+		xm_file=vax/xm-vaxv.h
+		tm_file=vax/vaxv.h
 		;;
 # This hasn't been upgraded to GCC 2.
 #	tahoe-harris-*)			# Harris tahoe, using COFF.
-#		tm_file=harris.h
+#		tm_file=tahoe/harris.h
 #		;;
 #	tahoe-*-bsd*)			# tahoe running BSD
-#		xm_file=xm-tahoe.h
-#		tm_file=tahoe.h
 #		;;
+	i370-*-mvs*)
+		cpu_type=i370
+		tm_file=i370/mvs.h
+		xm_file=i370/xm-mvs.h
+		out_file=i370/mvs370.c
+		;;
 	i[34]86-*-osfrose*)		# 386 using OSF/rose
-		tm_file=i386rose.h
-		xmake_file=x-i386rose
-		tmake_file=t-i386rose
-		use_collect2=yes
+# The following line (and similar below) is not redundant since this can
+# be used for i486 or i386.
+		cpu_type=i386
+                if [ x$elf = xyes ]
+		then
+			tm_file=i386/osfelf.h
+			use_collect2=
+		else
+			tm_file=i386/osfrose.h
+			use_collect2=yes
+		fi
+		xmake_file=i386/x-osfrose
+		tmake_file=i386/t-osfrose
 		;;
 	i[34]86-sequent-bsd*) 		# 80386 from Sequent
-		xm_file=xm-i386.h
+		cpu_type=i386
 		use_collect2=yes
 		if [ x$gas = xyes ]
 		then
-			tm_file=seq386gas.h
+			tm_file=i386/seq-gas.h
 		else
-			tm_file=seq386.h
+			tm_file=i386/sequent.h
 		fi
 		;;
+	i[34]86-next-*)
+		cpu_type=i386
+		tm_file=i386/next.h
+		out_file=i386/next.c
+		xm_file=i386/xm-next.h
+		tmake_file=i386/t-next
+		xmake_file=i386/x-next
+		;;
 	i[34]86-*-bsd*)
-		xm_file=xm-i386.h
-		tm_file=i386bsd.h
+		cpu_type=i386
+		tm_file=i386/386bsd.h
 #		tmake_file=t-libc-ok
-		use_collect2=yes
+# Next line turned off because both 386BSD and BSD/386 use GNU ld.
+#		use_collect2=yes
 		;;
 	i[34]86-*-mach*)
-		xm_file=xm-i386.h
-		tm_file=i386mach.h
+		cpu_type=i386
+		tm_file=i386/mach.h
 #		tmake_file=t-libc-ok
 		use_collect2=yes
 		;;
 	i[34]86-*-sco3.2v4*)	 	# 80386 running SCO 3.2v4 system
-		xm_file=xm-i386sco.h
-		tm_file=i386sco4.h
-		xmake_file=x-i386s4
-		tmake_file=t-i386sco
+		cpu_type=i386
+		xm_file=i386/xm-sco.h
+		xmake_file=i386/x-sco4
 		fixincludes=fixinc.sco
 		broken_install=yes
+		install_headers_dir=install-headers-cpio
+                if [ x$stabs = xyes ]
+		then
+			tm_file=i386/sco4dbx.h
+			tmake_file=i386/t-svr3dbx
+		else
+			tm_file=i386/sco4.h
+			tmake_file=i386/t-sco
+		fi
 		;;
 	i[34]86-*-sco*)		 	# 80386 running SCO system
-		xm_file=xm-i386sco.h
-		tm_file=i386sco.h
-		xmake_file=x-i386sco
-		tmake_file=t-i386sco
+		cpu_type=i386
+		xm_file=i386/xm-sco.h
+		xmake_file=i386/x-sco
 		broken_install=yes
+		install_headers_dir=install-headers-cpio
+                if [ x$stabs = xyes ]
+		then
+			tm_file=i386/scodbx.h
+			tmake_file=i386/t-svr3dbx
+		else
+			tm_file=i386/sco.h
+			tmake_file=i386/t-sco
+		fi
+		truncate_target=yes
 		;;
 	i[34]86-*-isc*)			# 80386 running ISC system
-		xm_file=xm-i386isc.h
-		xmake_file=x-i386isc
+		cpu_type=i386
+		xm_file=i386/xm-isc.h
+		case $machine in
+		  i[34]86-*-isc3*)
+		    xmake_file=i386/x-isc3
+		    ;;
+		  *)
+		    xmake_file=i386/x-isc
+		    ;;
+		esac
+		echo $xmake_file
                 if [ x$gas = xyes ]
 		then
-			tm_file=i386iscgas.h
-			tmake_file=t-i386iscgas
+			if [ x$stabs = xyes ]
+			then
+				tm_file=i386/iscdbx.h
+				tmake_file=i386/t-svr3dbx
+			else
+				# iscgas.h, a nonexistent file, was used here.
+				tm_file=i386/isccoff.h
+				tmake_file=i386/t-isc
+			fi
 		else
-			tm_file=i386isc.h
-			tmake_file=t-i386isc
+			tm_file=i386/isccoff.h
+			tmake_file=i386/t-isc
 		fi
+		install_headers_dir=install-headers-cpio
 		broken_install=yes
 		;;
 	i[34]86-ibm-aix*)		# IBM PS/2 running AIX
+		cpu_type=i386
                 if [ x$gas = xyes ]
 		then
-			tm_file=aix386.h
+			tm_file=i386/aix386.h
+			tmake_file=i386/t-aix
 		else
-			tm_file=aix386ng.h
+			tm_file=i386/aix386ng.h
 			use_collect2=yes
 		fi
-		xm_file=xm-aix386.h
-		xmake_file=x-aix386
+		xm_file=i386/xm-aix.h
+		xmake_file=i386/x-aix
 		broken_install=yes
+		fixincludes=fixinc.ps2
 		;;
 	i386-sun-sunos*)		# Sun i386 roadrunner
-		xm_file=xm-sun386.h
-		tm_file=i386sun.h
+		xm_file=i386/xm-sun.h
+		tm_file=i386/sun.h
 		use_collect2=yes
 		;;
 	i[34]86-*-linux*)               # Intel 80386's running Linux
 		cpu_type=i386
-		xm_file=xm-linux.h
-		xmake_file=x-linux
-		tm_file=i386linux.h
+		xm_file=i386/xm-linux.h
+		xmake_file=i386/x-linux
+                if [ x$elf = xyes ]
+		then
+			tm_file=i386/linuxelf.h
+		else
+			tm_file=i386/linux.h
+		fi
+		fixincludes=Makefile.in #On Linux, the headers are ok already.
 		broken_install=yes
 		;;
 	i486-ncr-sysv4*)		# NCR 3000 - i486 running system V.4
 		cpu_type=i386
-		xm_file=xm-i38v4.h
-		xmake_file=x-ncr3000
-		tm_file=i386v4.h
+		xm_file=i386/xm-sysv4.h
+		xmake_file=i386/x-ncr3000
+		tm_file=i386/sysv4.h
 		tmake_file=t-svr4
 		;;
 	i[34]86-*-sysv4*)		# Intel 80386's running system V.4
 		cpu_type=i386
-		xm_file=xm-i38v4.h
-		tm_file=i386v4.h
+		xm_file=i386/xm-sysv4.h
+		tm_file=i386/sysv4.h
 		tmake_file=t-svr4
 		xmake_file=x-svr4
 		;;
-	i[34]86-*-sysv*)		# Intel 80386's running system V
-		xm_file=xm-i386v.h
-		xmake_file=x-i386v
+	i[34]86-sequent-sysv*)		# Sequent 80386's running system V
+		cpu_type=i386
+		xm_file=i386/xm-sysv3.h
+		xmake_file=i386/x-sysv3
+		tm_file=i386/seq-sysv3.h
 		tmake_file=t-svr3
+		fixincludes=fixinc.svr4
+		broken_install=yes
+		;;
+	i[34]86-*-sysv*)		# Intel 80386's running system V
+		cpu_type=i386
+		xm_file=i386/xm-sysv3.h
+		xmake_file=i386/x-sysv3
 		if [ x$gas = xyes ]
 		then
 			if [ x$stabs = xyes ]
 			then
-				tm_file=i386gstabs.h
+				tm_file=i386/svr3dbx.h
+				tmake_file=i386/t-svr3dbx
 			else
-				tm_file=i386gas.h
+				tm_file=i386/svr3gas.h
+				tmake_file=t-svr3
 			fi
 		else
-			tm_file=i386v.h
+			tm_file=i386/sysv3.h
+			tmake_file=t-svr3
 		fi
 		;;
+	i[34]86-*-solaris2* | i[34]86-*-sunos5*)
+		cpu_type=i386
+		xm_file=i386/xm-sysv4.h
+		tm_file=i386/sol2.h
+		tmake_file=i386/t-sol2
+		xmake_file=x-svr4
+		fixincludes=fixinc.svr4
+		broken_install=yes
+		;;
+	i[34]86-*-lynxos)
+		cpu_type=i386
+		tm_file=i386/lynx.h
+		xm_file=xm-lynx.h
+		xmake_file=x-lynx
+		# ??? Due to bugs in /bin/sh, it is too much trouble to get
+		# the fixincludes script to run correctly, so just don't do it.
+		# There are only a very few very minor things that need fixing
+		# anyways.  Also, a number of headers files do not have final
+		# newlines, which causes them to be incorrectly editted by sed.
+		fixincludes=Makefile.in
+		;;
+	i860-*-osf*)			# Intel Paragon XP/S, OSF/1AD
+		xm_file=i860/xm-paragon.h
+		tm_file=i860/paragon.h
+		tmake_file=t-osf
+		broken_install=yes
+		;;
 	i860-*-mach*)
-		xm_file=xm-i860.h
-		tm_file=i860mach.h
+		xm_file=i860/xm-i860.h
+		tm_file=i860/mach.h
 		tmake_file=t-libc-ok
 		;;
 	i860-*-sysv3*)
-		xm_file=xm-i86v3.h
-		xmake_file=x-i860v3
-		tm_file=i860v3.h
+		xm_file=i860/xm-sysv3.h
+		xmake_file=i860/x-sysv3
+		tm_file=i860/sysv3.h
 		tmake_file=t-svr3
 		;;
 	i860-*-sysv4*)
-		xm_file=xm-i86v4.h
-		xmake_file=x-i860v4
-		tm_file=i860v4.h
+		xm_file=i860/xm-sysv4.h
+		xmake_file=i860/x-sysv4
+		tm_file=i860/sysv4.h
 		tmake_file=t-svr4
 		;;
 	i860-alliant-*)		# Alliant FX/2800
-		xm_file=xm-fx2800.h
-		xmake_file=x-fx2800
-		tm_file=fx2800.h
-		tmake_file=t-fx2800
+		xm_file=i860/xm-fx2800.h
+		xmake_file=i860/x-fx2800
+		tm_file=i860/fx2800.h
+		tmake_file=i860/t-fx2800
 		;;
 	i860-*-bsd*)
 		if [ x$gas = xyes ]
 		then
-			tm_file=i860bg.h
+			tm_file=i860/bsd-gas.h
 		else
-			tm_file=i860b.h
+			tm_file=i860/bsd.h
 		fi
 		use_collect2=yes
 		;;
-	sparc-tti-*)
-		tm_file=pbd.h
-		xm_file=xm-pbd.h
-		use_collect2=yes
-		;;
 	elxsi-elxsi-*)
-		tm_file=elxsi.h
-		xm_file=xm-elxsi.h
 		use_collect2=yes
 		;;
+	sparc-tti-*)
+		tm_file=sparc/pbd.h
+		xm_file=sparc/xm-pbd.h
+		;;
 	sparc-*-sunos4*)
-		tm_file=sparc.h
+		tm_file=sparc/sparc.h
 		use_collect2=yes
 		;;
 	sparc-*-sunos3*)
-		tm_file=sun4o3.h
+		tm_file=sparc/sun4o3.h
 		use_collect2=yes
 		;;
+	sparc-*-bsd*)
+		tm_file=sparc/bsd.h
+		;;
 	sparc-*-sysv4*)
-		xm_file=xm-spcv4.h
-		tm_file=sparcv4.h
+		xm_file=sparc/xm-sysv4.h
+		tm_file=sparc/sysv4.h
 		tmake_file=t-svr4
-		xmake_file=x-sparcv4
+		xmake_file=sparc/x-sysv4
 		;;
 	sparc-*-solaris2* | sparc-*-sunos5*)
-		xm_file=xm-spc-sol2.h
-		tm_file=spc-sol2.h
-		tmake_file=t-sol2
-		xmake_file=x-sparcv4
+		xm_file=sparc/xm-sol2.h
+		tm_file=sparc/sol2.h
+		tmake_file=sparc/t-sol2
+		xmake_file=sparc/x-sysv4
 		fixincludes=fixinc.svr4
 		broken_install=yes
 		;;
+	sparc-*-lynxos)
+		tm_file=sparc/lynx.h
+		xm_file=xm-lynx.h
+		xmake_file=x-lynx
+		# ??? Due to bugs in /bin/sh, it is too much trouble to get
+		# the fixincludes script to run correctly, so just don't do it.
+		# There are only a very few very minor things that need fixing
+		# anyways.  Also, a number of headers files do not have final
+		# newlines, which causes them to be incorrectly editted by sed.
+		fixincludes=Makefile.in
+		;;
+	sparclite-*-*)
+		cpu_type=sparc
+		tm_file=sparc/lite.h
+		use_collect2=yes
+		;;
 	m68k-cbm-sysv4*)		# Commodore variant of V.4.
-		tm_file=amix.h
-		xm_file=xm-amix.h
-		xmake_file=x-amix
+		tm_file=m68k/amix.h
+		xm_file=m68k/xm-amix.h
+		xmake_file=m68k/x-amix
 		tmake_file=t-svr4
 		header_files=math-68881.h
 		;;
 	m68k-*-sysv4*)			# Motorola m68k's running system V.4
-		tm_file=m68kv4.h
-		xm_file=xm-m68kv.h
+		tm_file=m68k/m68kv4.h
+		xm_file=m68k/xm-m68kv.h
 		tmake_file=t-svr4
 		header_files=math-68881.h
 		;;
 	m68k-bull-sysv*)		# Bull DPX/2
 		if [ x$gas = xyes ]
 		then
-			tm_file=dpx2g.h
+			if [ x$stabs = xyes ]
+			then
+				tm_file=m68k/dpx2cdbx.h
+			else
+				tm_file=m68k/dpx2g.h
+			fi
 		else
-			echo dpx2 supported only with GAS 1>&2
-			exit 1
-			tm_file=dpx2.h
+			tm_file=m68k/dpx2.h
 		fi
-		xm_file=xm-m68kv.h
-		xmake_file=x-dpx2
+		xm_file=m68k/xm-m68kv.h
+		xmake_file=m68k/x-dpx2
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
 	m68k-next-*)
-		tm_file=next.h
-		out_file=next.c
-		xm_file=xm-next.h
-		tmake_file=t-next
-		xmake_file=x-next
-		use_collect2=yes
+		tm_file=m68k/next.h
+		out_file=m68k/next.c
+		xm_file=m68k/xm-next.h
+		tmake_file=m68k/t-next
+		xmake_file=m68k/x-next
 		header_files=math-68881.h
 		;;
 	m68k-sun-sunos3*)
 		if [ x$nfp = xyes ]
 		then
-			tm_file=sun3n3.h
+			tm_file=m68k/sun3n3.h
 		else
-			tm_file=sun3o3.h
+			tm_file=m68k/sun3o3.h
 		fi
 		use_collect2=yes
 		header_files=math-68881.h
@@ -525,72 +693,92 @@ for machine in $canon_build $canon_host
 	m68k-sun-sunos*)		# For SunOS 4 (the default).
 		if [ x$nfp = xyes ]
 		then
-			tm_file=sun3n.h
+			tm_file=m68k/sun3n.h
 		else
-			tm_file=sun3.h
+			tm_file=m68k/sun3.h
 		fi
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
 	m68k-sun-mach*)
-		tm_file=sun3mach.h
+		tm_file=m68k/sun3mach.h
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
 	m68k-tti-*)
-		tm_file=pbb.h
-		xm_file=xm-m68kv.h
+		tm_file=m68k/pbb.h
+		xm_file=m68k/xm-m68kv.h
+		header_files=math-68881.h
+		;;
+	m68k-hp-hpux7*)	# HP 9000 series 300 running HPUX version 7.
+		xm_file=m68k/xm-hp320.h
+		if [ x$gas = xyes ]
+		then
+			xmake_file=m68k/x-hp320g
+			tmake_file=m68k/t-hp320g
+			tm_file=m68k/hp320g.h
+		else
+			xmake_file=m68k/x-hp320
+			tm_file=m68k/hpux7.h
+		fi
+		broken_install=yes
+		install_headers_dir=install-headers-cpio
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
 	m68k-hp-hpux*)	# HP 9000 series 300
-		xm_file=xm-hp320.h
+		xm_file=m68k/xm-hp320.h
 		if [ x$gas = xyes ]
 		then
-			xmake_file=x-hp320g
-			tmake_file=t-hp320g
-			tm_file=hp320g.h
+			xmake_file=m68k/x-hp320g
+			tmake_file=m68k/t-hp320g
+			tm_file=m68k/hp320g.h
 		else
-			xmake_file=x-hp320
-			tm_file=hp320.h
+			xmake_file=m68k/x-hp320
+			tm_file=m68k/hp320.h
 		fi
 		broken_install=yes
+		install_headers_dir=install-headers-cpio
+		use_collect2=yes
+		header_files=math-68881.h
+		;;
+	m68k-hp-bsd4.4*)		# HP 9000/3xx running 4.4bsd
+		tm_file=m68k/hp3bsd44.h
+		xmake_file=m68k/x-hp3bsd44
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
 	m68k-hp-bsd*)			# HP 9000/3xx running Berkeley Unix
-		tm_file=hp3bsd.h
+		tm_file=m68k/hp3bsd.h
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
 	m68k-isi-bsd*)
 		if [ x$nfp = xyes ]
 		then
-			tm_file=isi-nfp.h
+			tm_file=m68k/isi-nfp.h
 		else
-			tm_file=isi.h
+			tm_file=m68k/isi.h
 		fi
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
 	m68k-sony-newsos3*)
-	        xm_file=xm-m68k.h
 		if [ x$gas = xyes ]
 		then
-			tm_file=news3gas.h
+			tm_file=m68k/news3gas.h
 		else
-			tm_file=news3.h
+			tm_file=m68k/news3.h
 		fi
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
 	m68k-sony-bsd* | m68k-sony-newsos*)
-	        xm_file=xm-m68k.h
 		if [ x$gas = xyes ]
 		then
-			tm_file=newsgas.h
+			tm_file=m68k/newsgas.h
 		else
-			tm_file=news.h
+			tm_file=m68k/news.h
 		fi
 		use_collect2=yes
 		header_files=math-68881.h
@@ -598,8 +786,8 @@ for machine in $canon_build $canon_host
 	m68k-altos-sysv*)		   # Altos 3068
 		if [ x$gas = xyes ]
 		then
-		        xm_file=xm-altos3068.h
-		        tm_file=altos3068.h
+		        xm_file=m68k/xm-altos3068.h
+		        tm_file=m68k/altos3068.h
 		else
 			echo "The Altos is supported only with the GNU assembler" 1>&2
 			exit 1
@@ -607,456 +795,793 @@ for machine in $canon_build $canon_host
 		header_files=math-68881.h
 	        ;;
 	m68k-motorola-sysv*)
-		tm_file=mot3300.h
-		xm_file=xm-mot3300.h
+		tm_file=m68k/mot3300.h
+		xm_file=m68k/xm-mot3300.h
+		xmake_file=m68k/x-alloca-c
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
 	m68k-crds-unos*)
-		xm_file=xm-crds.h
-		xmake_file=x-crds
-		tm_file=crds.h
+		xm_file=m68k/xm-crds.h
+		xmake_file=m68k/x-crds
+		tm_file=m68k/crds.h
 		broken_install=yes
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
 	m68k-apollo-*)
-		xmake_file=x-apollo68
-		tm_file=apollo68.h
+		xmake_file=m68k/x-apollo68
+		tm_file=m68k/apollo68.h
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
         m68k-plexus-sysv*)
-	        cpu_type=m68k
-		tm_file=plexus.h
+		tm_file=m68k/plexus.h
+		xm_file=m68k/xm-plexus.h
 		use_collect2=yes
-		xm_file=xm-plexus.h
 		header_files=math-68881.h
 		;;
 	m68k-ncr-sysv*)			# NCR Tower 32 SVR3
-		tm_file=tower-as.h
-		xm_file=xm-tower.h
-		xmake_file=x-tower
+		tm_file=m68k/tower-as.h
+		xm_file=m68k/xm-tower.h
+		xmake_file=m68k/x-tower
 		tmake_file=t-svr3
 		header_files=math-68881.h
 		;;
 	m68k-*-sysv3*)			# Motorola m68k's running system V.3
-		tm_file=m68k.h
-		xm_file=xm-m68kv.h
-		xmake_file=x-m68kv
+		xm_file=m68k/xm-m68kv.h
+		xmake_file=m68k/x-m68kv
 		tmake_file=t-svr3
 		header_files=math-68881.h
 		;;
 	m68000-sun-sunos3*)
 		cpu_type=m68k
-		tm_file=sun2.h
+		tm_file=m68k/sun2.h
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
 	m68000-sun-sunos4*)
 		cpu_type=m68k
-		tm_file=sun2o4.h
+		tm_file=m68k/sun2o4.h
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
 	m68000-hp-hpux*)		# HP 9000 series 300
 		cpu_type=m68k
-		xm_file=xm-hp320.h
+		xm_file=m68k/xm-hp320.h
 		if [ x$gas = xyes ]
 		then
-			xmake_file=x-hp320g
-			tm_file=hp310g.h
+			xmake_file=m68k/x-hp320g
+			tm_file=m68k/hp310g.h
 		else
-			xmake_file=x-hp320
-			tm_file=hp310.h
+			xmake_file=m68k/x-hp320
+			tm_file=m68k/hp310.h
 		fi
 		broken_install=yes
+		install_headers_dir=install-headers-cpio
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
 	m68000-hp-bsd*)			# HP 9000/200 running BSD
 		cpu_type=m68k
-		tm_file=hp2bsd.h
-		xmake_file=x-hp2bsd
+		tm_file=m68k/hp2bsd.h
+		xmake_file=m68k/x-hp2bsd
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
 	m68000-att-sysv*)
 		cpu_type=m68k
-		xm_file=xm-3b1.h
+		xm_file=m68k/xm-3b1.h
 		if [ x$gas = xyes ]
 		then
-			tm_file=3b1g.h
+			tm_file=m68k/3b1g.h
 		else
-			tm_file=3b1.h
+			tm_file=m68k/3b1.h
 		fi
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
+	m68k-*-lynxos)
+		tm_file=m68k/lynx.h
+		xm_file=xm-lynx.h
+		xmake_file=x-lynx
+		# ??? Due to bugs in /bin/sh, it is too much trouble to get
+		# the fixincludes script to run correctly, so just don't do it.
+		# There are only a very few very minor things that need fixing
+		# anyways.  Also, a number of headers files do not have final
+		# newlines, which causes them to be incorrectly editted by sed.
+		fixincludes=Makefile.in
+		header_files=math-68881.h
+		;;
 	m68000-convergent-sysv*)
 		cpu_type=m68k
-		xm_file=xm-3b1.h
-		tm_file=ctix.h
+		xm_file=m68k/xm-3b1.h
+		tm_file=m68k/ctix.h
 		use_collect2=yes
 		header_files=math-68881.h
 		;;
-	ns32k-encore-osf*)		# Encore with OSF/rose
-		tm_file=encrose.h
-		xmake_file=x-encrose
-		tmake_file=t-encrose
-		use_collect2=yes
-		;;
 	ns32k-sequent-bsd*)
-		tm_file=sequent.h
+		tm_file=ns32k/sequent.h
 		use_collect2=yes
 		;;
 	ns32k-encore-bsd*)
-		tm_file=encore.h
+		tm_file=ns32k/encore.h
 		use_collect2=yes
 		;;
 # This has not been updated to GCC 2.
 #	ns32k-ns-genix*)
-#		xm_file=xm-genix.h
-#		xmake_file=x-genix
-#		tm_file=genix.h
+#		xm_file=ns32k/xm-genix.h
+#		xmake_file=ns32k/x-genix
+#		tm_file=ns32k/genix.h
 #		broken_install=yes
 #		use_collect2=yes
 #		;;
 	ns32k-merlin-*)
-		tm_file=merlin.h
+		tm_file=ns32k/merlin.h
 		use_collect2=yes
 		;;
 	ns32k-tek6100-bsd*)
-		tm_file=tek6100.h
+		tm_file=ns32k/tek6100.h
 		broken_install=yes
 		use_collect2=yes
 		;;
 	ns32k-tek6200-bsd*)
-		tm_file=tek6200.h
+		tm_file=ns32k/tek6200.h
 		broken_install=yes
 		use_collect2=yes
 		;;
 	ns32k-pc532-mach*)
-		tm_file=pc532-mach.h
+		tm_file=ns32k/pc532-mach.h
 		use_collect2=yes
 		;;
 	ns32k-pc532-minix*)
-		tm_file=pc532-min.h
-		xm_file=xm-pc532-min.h
+		tm_file=ns32k/pc532-min.h
+		xm_file=ns32k/xm-pc532-min.h
 		use_collect2=yes
 		;;
 	m88k-*-luna*)
-		tm_file=m88kluna.h
-		tmake_file=t-m88kluna
+		tm_file=m88k/luna.h
+		if [ x$gas = xyes ]
+		then
+		  tmake_file=m88k/t-luna-gas
+		else
+		  tmake_file=m88k/t-luna
+		fi
 		;;
 	m88k-dg-dgux*)
-		tm_file=m88kdgux.h
-		xmake_file=x-m88kdgux
+		tm_file=m88k/dgux.h
+		xmake_file=m88k/x-dgux
 		broken_install=yes
+		if [ x$gas = xyes ]
+		then
+		  tmake_file=m88k/t-dgux-gas
+		else
+		  tmake_file=m88k/t-dgux
+		fi
+		fixincludes=fixinc.dgux
 		;;
+	m88k-mot*-sysv4*)	#added by kev for Motorola delta machines
+		tm_file=m88k/mot-sysv4.h	#added by kev
+		xmake_file=m88k/x-sysv4		#added by kev
+		tmake_file=m88k/t-sysv4		#added by kev
+		;;				#added by kev
 	m88k-*-sysv4*)
-		tm_file=m88kv4.h
-		xmake_file=x-m88kv4
-		tmake_file=t-m88kv4
+		tm_file=m88k/sysv4.h
+		xmake_file=m88k/x-sysv4
+		tmake_file=m88k/t-sysv4
 		;;
 	m88k-dolphin-sysv3*)
-		tm_file=m88kdolph.h
-		xm_file=xm-m88kv3.h
-		xmake_file=x-m88kdolph
+		tm_file=m88k/dolph.h
+		xm_file=m88k/xm-sysv3.h
+		xmake_file=m88k/x-dolph
+		if [ x$gas = xyes ]
+		then
+		  tmake_file=m88k/t-m88k-gas
+		fi
+		;;
+
+	m88k-tektronix-sysv3)
+		tm_file=m88k/tekXD88.h
+		xm_file=m88k/xm-sysv3.h
+		xmake_file=m88k/x-tekXD88
+		if [ x$gas = xyes ]
+		then
+		  tmake_file=m88k/t-m88k-gas
+		fi
 		;;
+
 	m88k-*-sysv3*)
-		tm_file=m88kv3.h
-		xm_file=xm-m88kv3.h
+		tm_file=m88k/sysv3.h
+		xm_file=m88k/xm-sysv3.h
+		xmake_file=m88k/x-sysv3
+		if [ x$gas = xyes ]
+		then
+		  tmake_file=m88k/t-m88k-gas
+		fi
 		;;
 # This hasn't been upgraded to GCC 2.
 #	fx80-alliant-*)			# Alliant FX/80
-#		tm_file=fx80.h
 #		;;
-	arm-*-*)			# Acorn RISC machine
-		tm_file=arm.h
+	arm-*-riscix1.[01]*)		# Acorn RISC machine (early versions)
+		tm_file=arm/riscix1-1.h
+		use_collect2=yes
+		;;
+	arm-*-riscix*)			# Acorn RISC machine
+		if [ x$gas = xyes ]
+		then
+		    tm_file=arm/rix-gas.h
+		else
+		    tm_file=arm/riscix.h
+		fi
+		use_collect2=yes
+		;;
+	arm-*-*)			# generic version
 		;;
 	c1-convex-*)			# Convex C1
-		tm_file=convex1.h
 		cpu_type=convex
+		tm_file=convex/convex1.h
 		use_collect2=yes
 		;;
 	c2-convex-*)			# Convex C2
-		tm_file=convex2.h
 		cpu_type=convex
+		tm_file=convex/convex2.h
 		use_collect2=yes
 		;;
 	c32-convex-*)
-		tm_file=convex32.h	# Convex C32xx
 		cpu_type=convex
+		tm_file=convex/convex32.h	# Convex C32xx
 		use_collect2=yes
 		;;
 	c34-convex-*)
-		tm_file=convex34.h	# Convex C34xx
 		cpu_type=convex
+		tm_file=convex/convex34.h	# Convex C34xx
 		use_collect2=yes
 		;;
 	c38-convex-*)
-		tm_file=convex38.h	# Convex C38xx
 		cpu_type=convex
+		tm_file=convex/convex38.h	# Convex C38xx
 		use_collect2=yes
 		;;
+	mips-sgi-irix5*)		# SGI System V.4., IRIX 5
+		tm_file=mips/iris5.h
+		xm_file=mips/xm-iris5.h
+		broken_install=yes
+		fixincludes=Makefile.in
+		xmake_file=mips/x-iris
+		# mips-tfile doesn't work yet
+		tmake_file=mips/t-mips-gas
+		;;
+	mips-sgi-irix4loser*)		# Mostly like a MIPS.
+		if [ x$stabs = xyes ]; then
+			tm_file=mips/iris4gl.h
+		else
+			tm_file=mips/iris4loser.h
+		fi
+		xm_file=mips/xm-iris4.h
+		broken_install=yes
+		xmake_file=mips/x-iris
+		if [ x$gas = xyes ]
+		then
+			tmake_file=mips/t-mips-gas
+		else
+			extra_passes="mips-tfile mips-tdump"
+		fi
+		if [ x$gnu_ld != xyes ]
+		then
+			use_collect2=yes
+		fi
+		;;
 	mips-sgi-irix4*)		# Mostly like a MIPS.
 		if [ x$stabs = xyes ]; then
-		    tm_file=iris4g.h
+			tm_file=mips/iris4-gdb.h
 		else
-		    tm_file=iris4.h
+			tm_file=mips/iris4.h
 		fi
-		xm_file=xm-irix4.h
+		xm_file=mips/xm-iris4.h
 		broken_install=yes
-		xmake_file=x-iris
-		use_collect2=yes
+		xmake_file=mips/x-iris
+		if [ x$gas = xyes ]
+		then
+			tmake_file=mips/t-mips-gas
+		else
+			extra_passes="mips-tfile mips-tdump"
+		fi
+		if [ x$gnu_ld != xyes ]
+		then
+			use_collect2=yes
+		fi
 		;;
 	mips-sgi-*)			# Mostly like a MIPS.
 		if [ x$stabs = xyes ]; then
-		    tm_file=irisgdb.h
+			tm_file=mips/iris3-gdb.h
 		else
-		    tm_file=iris.h
+			tm_file=mips/iris3.h
 		fi
-		xm_file=xm-iris.h
+		xm_file=mips/xm-iris3.h
 		broken_install=yes
-		xmake_file=x-iris
-		use_collect2=yes
+		xmake_file=mips/x-iris3
+		if [ x$gas = xyes ]
+		then
+			tmake_file=mips/t-mips-gas
+		else
+			extra_passes="mips-tfile mips-tdump"
+		fi
+		if [ x$gnu_ld != xyes ]
+		then
+			use_collect2=yes
+		fi
 		;;
-	mips-dec-ultrix*)		# Decstation.
+	mips-*-ultrix*)		# Decstation.
 		if [ x$stabs = xyes ]; then
-		    tm_file=decstabs.h
+			tm_file=mips/ultrix-gdb.h
 		else
-		    tm_file=decstatn.h
+			tm_file=mips/ultrix.h
+		fi
+		xmake_file=mips/x-ultrix
+		if [ x$gas = xyes ]
+		then
+			tmake_file=mips/t-mips-gas
+		else
+			tmake_file=mips/t-ultrix
+			extra_passes="mips-tfile mips-tdump"
+		fi
+		if [ x$gnu_ld != xyes ]
+		then
+			use_collect2=yes
 		fi
-		tmake_file=t-decstatn
-		xmake_file=x-decstatn
-		use_collect2=yes
 	        ;;
 	mips-dec-osfrose*)		# Decstation running OSF/1 reference port with OSF/rose.
-		tm_file=decrose.h
-		xmake_file=x-decrose
-		tmake_file=t-decrose
+		tm_file=mips/osfrose.h
+		xmake_file=mips/x-osfrose
+		tmake_file=mips/t-osfrose
 		use_collect2=yes
 		;;
 	mips-dec-osf*)			# Decstation running OSF/1 as shipped by DIGITAL
 		if [ x$stabs = xyes ]; then
-		    tm_file=dec-gosf1.h
+			tm_file=mips/dec-gosf1.h
 		else
-		    tm_file=dec-osf1.h
+			tm_file=mips/dec-osf1.h
+		fi
+		xmake_file=mips/x-dec-osf1
+		if [ x$gas = xyes ]
+		then
+			tmake_file=mips/t-mips-gas
+		else
+			tmake_file=mips/t-ultrix
+			extra_passes="mips-tfile mips-tdump"
+		fi
+		if [ x$gnu_ld != xyes ]
+		then
+			use_collect2=yes
 		fi
-		xmake_file=x-dec-osf1
-		tmake_file=t-decstatn
-		use_collect2=yes
 		;;
+      mips-dec-bsd*)                  # Decstation running 4.4 BSD
+              tm_file=mips/dec-bsd.h
+              xmake_file=
+              tmake_file=
+              fixincludes=
+	      if [ x$gas = xyes ]
+	      then
+		   	tmake_file=mips/t-mips-gas
+	      else
+			tmake_file=mips/t-ultrix
+			extra_passes="mips-tfile mips-tdump"
+	      fi
+	      if [ x$gnu_ld != xyes ]
+	      then
+			use_collect2=yes
+	      fi
+	      ;;
 	mips-sony-bsd* | mips-sony-newsos*)	# Sony NEWS 3600 or risc/news.
 		if [ x$stabs = xyes ]; then
-		    tm_file=mips-gnews.h
+			tm_file=mips/news4-gdb.h
 		else
-		    tm_file=mips-news.h
+			tm_file=mips/news4.h
 		fi
-		xm_file=xm-mips.h
-		use_collect2=yes
+		if [ x$gas = xyes ]
+		then
+			tmake_file=mips/t-mips-gas
+		else
+			extra_passes="mips-tfile mips-tdump"
+		fi
+		if [ x$gnu_ld != xyes ]
+		then
+			use_collect2=yes
+		fi
+		xmake_file=mips/x-sony
 		;;
 	mips-sony-sysv*)		# Sony NEWS 3800 with NEWSOS5.0.
 					# That is based on svr4.
 		# t-svr4 is not right because this system doesn't use ELF.
 		if [ x$stabs = xyes ]; then
-		    tm_file=mips-gn5.h
+			tm_file=mips/news5-gdb.h
 		else
-		    tm_file=mips-n5.h
+			tm_file=mips/news5.h
+		fi
+		xm_file=mips/xm-news.h
+		if [ x$gas = xyes ]
+		then
+			tmake_file=mips/t-mips-gas
+		else
+			extra_passes="mips-tfile mips-tdump"
+		fi
+		if [ x$gnu_ld != xyes ]
+		then
+			use_collect2=yes
 		fi
-		xm_file=xm-mipsnews.h
-		use_collect2=yes
 		;;
-	mips-*riscos[56789]bsd* | mips-*riscos[56789]-bsd*)
+	mips-*-riscos[56789]bsd* | mips-*-riscos[56789]-bsd*)
 		if [ x$stabs = xyes ]; then	# MIPS BSD 4.3, RISC-OS 5.0
-		    tm_file=mips-5gbsd.h
+			tm_file=mips/bsd-5-gdb.h
 		else
-		    tm_file=mips-5bsd.h
+			tm_file=mips/bsd-5.h
 		fi
-		use_collect2=yes
+		if [ x$gas = xyes ]
+		then
+			tmake_file=mips/t-bsd-gas
+		else
+			tmake_file=mips/t-bsd
+			extra_passes="mips-tfile mips-tdump"
+		fi
+		if [ x$gnu_ld != xyes ]
+		then
+			use_collect2=yes
+		fi
+		fixincludes=fixinc.mips
+		broken_install=yes
 	        ;;
-	mips-*-bsd* | mips-*riscosbsd* | mips-*riscos[1234]bsd* \
-		| mips-*riscos-bsd* | mips-*riscos[1234]-bsd*)
+	mips-*-bsd* | mips-*-riscosbsd* | mips-*-riscos[1234]bsd* \
+		| mips-*-riscos-bsd* | mips-*-riscos[1234]-bsd*)
 		if [ x$stabs = xyes ]; then	# MIPS BSD 4.3, RISC-OS 4.0
-		    tm_file=mips-gbsd.h
+			tm_file=mips/bsd-4-gdb.h
 		else
-		    tm_file=mips-bsd.h
+			tm_file=mips/bsd-4.h
 		fi
-		use_collect2=yes
+		if [ x$gas = xyes ]
+		then
+			tmake_file=mips/t-bsd-gas
+		else
+			tmake_file=mips/t-bsd
+			extra_passes="mips-tfile mips-tdump"
+		fi
+		if [ x$gnu_ld != xyes ]
+		then
+			use_collect2=yes
+		fi
+		broken_install=yes
 	        ;;
-	mips-*riscos[56789]sysv4* | mips-*riscos[56789]-sysv4*)
+	mips-*-riscos[56789]sysv4* | mips-*-riscos[56789]-sysv4*)
 		if [ x$stabs = xyes ]; then	# MIPS System V.4., RISC-OS 5.0
-		    tm_file=mips-5gsvr4.h
+			tm_file=mips/svr4-5-gdb.h
 		else
-		    tm_file=mips-5svr4.h
+			tm_file=mips/svr4-5.h
 		fi
-		xm_file=xm-umips.h
-		xmake_file=x-mipsv
+		xm_file=mips/xm-sysv4.h
+		xmake_file=mips/x-sysv
+		if [ x$gas = xyes ]
+		then
+			tmake_file=mips/t-svr4-gas
+		else
+			tmake_file=mips/t-svr4
+			extra_passes="mips-tfile mips-tdump"
+		fi
+		if [ x$gnu_ld != xyes ]
+		then
+			use_collect2=yes
+		fi
+		fixincludes=fixinc.mips
+		broken_install=yes
 		;;
-	mips-*-sysv4* | mips-*riscos[1234]sysv4* | mips-*riscossysv4* \
-		| mips-*riscos[1234]-sysv4* | mips-*riscos-sysv4*)
+	mips-*-sysv4* | mips-*-riscos[1234]sysv4* | mips-*-riscossysv4* \
+		| mips-*-riscos[1234]-sysv4* | mips-*-riscos-sysv4*)
 		if [ x$stabs = xyes ]; then	# MIPS System V.4. RISC-OS 4.0
-		    tm_file=mips-gsvr4.h
+			tm_file=mips/svr4-4-gdb.h
+		else
+			tm_file=mips/svr4-4.h
+		fi
+		xm_file=mips/xm-sysv.h
+		xmake_file=mips/x-sysv
+		if [ x$gas = xyes ]
+		then
+			tmake_file=mips/t-svr4-gas
 		else
-		    tm_file=mips-svr4.h
+			tmake_file=mips/t-svr4
+			extra_passes="mips-tfile mips-tdump"
 		fi
-		xm_file=xm-umips.h
-		xmake_file=x-mipsv
+		if [ x$gnu_ld != xyes ]
+		then
+			use_collect2=yes
+		fi
+		broken_install=yes
 		;;
-	mips-*riscos[56789]sysv* | mips-*-riscos[56788]-sysv*)
+	mips-*-riscos[56789]sysv* | mips-*-riscos[56788]-sysv*)
 		if [ x$stabs = xyes ]; then	# MIPS System V.3, RISC-OS 5.0
-		    tm_file=mips-5gsysv.h
+			tm_file=mips/svr3-5-gdb.h
 		else
-		    tm_file=mips-5sysv.h
+			tm_file=mips/svr3-5.h
 		fi
-		xm_file=xm-umips.h
-		xmake_file=x-mipsv
-		use_collect2=yes
+		xm_file=mips/xm-sysv.h
+		xmake_file=mips/x-sysv
+		if [ x$gas = xyes ]
+		then
+			tmake_file=mips/t-svr3-gas
+		else
+			tmake_file=mips/t-svr3
+			extra_passes="mips-tfile mips-tdump"
+		fi
+		if [ x$gnu_ld != xyes ]
+		then
+			use_collect2=yes
+		fi
+		fixincludes=fixinc.mips
+		broken_install=yes
 		;;
-	mips-*-sysv* | mips-*riscossysv* | mips-*riscos-sysv*)
+	mips-*-sysv* | mips-*riscos*sysv*)
 		if [ x$stabs = xyes ]; then	# MIPS System V.3, RISC-OS 4.0
-		    tm_file=mips-gsysv.h
+			tm_file=mips/svr3-4-gdb.h
 		else
-		    tm_file=mips-sysv.h
+			tm_file=mips/svr3-4.h
 		fi
-		xm_file=xm-umips.h
-		xmake_file=x-mipsv
-		use_collect2=yes
+		xm_file=mips/xm-sysv.h
+		xmake_file=mips/x-sysv
+		if [ x$gas = xyes ]
+		then
+			tmake_file=mips/t-svr3-gas
+		else
+			tmake_file=mips/t-svr3
+			extra_passes="mips-tfile mips-tdump"
+		fi
+		if [ x$gnu_ld != xyes ]
+		then
+			use_collect2=yes
+		fi
+		broken_install=yes
 		;;
 	mips-*riscos[56789]*)			# Default MIPS RISC-OS 5.0.
 		if [ x$stabs = xyes ]; then
-		    tm_file=mips-5gdb.h
+			tm_file=mips/mips-5-gdb.h
 		else
-		    tm_file=mips-5.h
+			tm_file=mips/mips-5.h
 		fi
-		use_collect2=yes
+		if [ x$gas = xyes ]
+		then
+			tmake_file=mips/t-mips-gas
+		else
+			extra_passes="mips-tfile mips-tdump"
+		fi
+		if [ x$gnu_ld != xyes ]
+		then
+			use_collect2=yes
+		fi
+		fixincludes=fixinc.mips
+		broken_install=yes
 		;;
 	mips-*-*)				# Default MIPS RISC-OS 4.0.
 		if [ x$stabs = xyes ]; then
-		    tm_file=mips-gdb.h
+			tm_file=mips/mips-4-gdb.h
 		else
-		    tm_file=mips.h
+			tm_file=mips/mips.h
+		fi
+		if [ x$gas = xyes ]
+		then
+			tmake_file=mips/t-mips-gas
+		else
+			extra_passes="mips-tfile mips-tdump"
+		fi
+		if [ x$gnu_ld != xyes ]
+		then
+			use_collect2=yes
 		fi
-		use_collect2=yes
 		;;
 	pyramid-*-*)
 		cpu_type=pyr
-		tm_file=pyr.h
+		xmake_file=pyr/x-pyr
 		use_collect2=yes
 		;;
 # This hasn't been upgraded to GCC 2.
 #	tron-*-*)
 #		cpu_type=gmicro
-#		tm_file=gmicro.h
 #		use_collect2=yes
 #		;;
 	a29k-*-bsd*)
-		tm_file=a29kunix.h
-		xm_file=xm-a29kunix.h
-		xmake_file=x-a29kunix
+		tm_file=a29k/unix.h
+		xm_file=a29k/xm-unix.h
+		xmake_file=a29k/x-unix
 		use_collect2=yes
 		;;
 	a29k-*-*)			# Default a29k environment.
 		use_collect2=yes
 		;;
 	romp-*-aos*)
-		xm_file=xm-romp.h
-		tm_file=romp.h
 		use_collect2=yes
 		;;
 	romp-*-mach*)
-		xm_file=xm-romp.h
-		tm_file=romp.h
-		xmake_file=x-romp-mach
+		xmake_file=romp/x-mach
 		use_collect2=yes
 		;;
 	rs6000-*-mach*)
-		xm_file=xm-rs6k-m.h
-		tm_file=rs6000-mach.h
-		xmake_file=x-rs6k-mach
+		xm_file=rs6000/xm-mach.h
+		tm_file=rs6000/mach.h
+		xmake_file=rs6000/x-mach
 		use_collect2=yes
 		;;
-	rs6000-ibm-aix32)
-		xm_file=xm-rs6000.h
-		tm_file=rs6000-aix32.h
+	rs6000-ibm-aix3.[01]*)
+		tm_file=rs6000/aix31.h
+		xmake_file=rs6000/x-aix31
 		use_collect2=yes
 		;;
 	rs6000-ibm-aix*)
-		xm_file=xm-rs6000.h
-		tm_file=rs6000.h
+		use_collect2=yes
+		;;
+	powerpc-ibm-aix*)
+		cpu_type=rs6000
+		tm_file=rs6000/powerpc.h
+		use_collect2=yes
+		;;
+	hppa1.1-*-mach*)
+		cpu_type=pa
+		tm_file=pa/pa1-utahmach.h
+		use_collect2=yes
+		;;
+	hppa1.0-*-mach*)
+		cpu_type=pa
+		tm_file=pa/pa-utahmach.h
 		use_collect2=yes
 		;;
 	hppa1.1-*-bsd*)
 		cpu_type=pa
-		xm_file=xm-pa.h
-		tm_file=pa1.h
-		xmake_file=x-pa
-		tmake_file=t-pa
+		tm_file=pa/pa1.h
 		use_collect2=yes
 		;;
 	hppa1.0-*-bsd*)
 		cpu_type=pa
-		xm_file=xm-pa.h
-		tm_file=pa.h
-		xmake_file=x-pa
-		tmake_file=t-pa
 		use_collect2=yes
 		;;
 	hppa1.0-*-hpux7*)
 		cpu_type=pa
-		xm_file=xm-pahpux.h
-		xmake_file=x-pa-hpux
+		xm_file=pa/xm-pahpux.h
+		xmake_file=pa/x-pa-hpux
+		tmake_file=t-libc-ok
+		if [ x$gas = xyes ]
+		then
+			tm_file=pa/pa-gux7.h
+		else
+			tm_file=pa/pa-hpux7.h
+		fi
+		broken_install=yes
+		install_headers_dir=install-headers-cpio
+		use_collect2=yes
+		;;
+	hppa1.0-*-hpux8.0[0-2]*)
+		cpu_type=pa
+		xm_file=pa/xm-pahpux.h
+		xmake_file=pa/x-pa-hpux
+		tmake_file=t-libc-ok
+		if [ x$gas = xyes ]
+		then
+			tm_file=pa/pa-ghpux.h
+		else
+			tm_file=pa/pa-oldas.h
+		fi
+		broken_install=yes
+		install_headers_dir=install-headers-cpio
+		use_collect2=yes
+		;;
+	hppa1.1-*-hpux8.0[0-2]*)
+		cpu_type=pa
+		xm_file=pa/xm-pahpux.h
+		xmake_file=pa/x-pa-hpux
 		tmake_file=t-libc-ok
 		if [ x$gas = xyes ]
 		then
-			tm_file=pa-gux7.h
+			tm_file=pa/pa1-ghpux.h
 		else
-			tm_file=pa-hpux7.h
+			tm_file=pa/pa1-oldas.h
 		fi
 		broken_install=yes
+		install_headers_dir=install-headers-cpio
 		use_collect2=yes
 		;;
 	hppa1.1-*-hpux*)
 		cpu_type=pa
-		xm_file=xm-pahpux.h
-		xmake_file=x-pa-hpux
+		xm_file=pa/xm-pahpux.h
+		xmake_file=pa/x-pa-hpux
 		tmake_file=t-libc-ok
 		if [ x$gas = xyes ]
 		then
-			tm_file=pa1-ghpux.h
+			tm_file=pa/pa1-ghpux.h
 		else
-			tm_file=pa1-hpux.h
+			tm_file=pa/pa1-hpux.h
 		fi
 		broken_install=yes
+		install_headers_dir=install-headers-cpio
 		use_collect2=yes
 		;;
 	hppa1.0-*-hpux*)
 		cpu_type=pa
-		xm_file=xm-pahpux.h
-		xmake_file=x-pa-hpux
+		xm_file=pa/xm-pahpux.h
+		xmake_file=pa/x-pa-hpux
+		tmake_file=t-libc-ok
+		if [ x$gas = xyes ]
+		then
+			tm_file=pa/pa-ghpux.h
+		else
+			tm_file=pa/pa-hpux.h
+		fi
+		broken_install=yes
+		install_headers_dir=install-headers-cpio
+		use_collect2=yes
+		;;
+	hppa1.1-*-hiux*)
+		cpu_type=pa
+		xm_file=pa/xm-pahiux.h
+		xmake_file=pa/x-pa-hiux
+		tmake_file=t-libc-ok
+		if [ x$gas = xyes ]
+		then
+			tm_file=pa/pa1-ghiux.h
+		else
+			tm_file=pa/pa1-hiux.h
+		fi
+		broken_install=yes
+		install_headers_dir=install-headers-cpio
+		use_collect2=yes
+		;;
+	hppa1.0-*-hiux*)
+		cpu_type=pa
+		xm_file=pa/xm-pahiux.h
+		xmake_file=pa/x-pa-hiux
 		tmake_file=t-libc-ok
 		if [ x$gas = xyes ]
 		then
-			tm_file=pa-ghpux.h
+			tm_file=pa/pa-ghiux.h
 		else
-			tm_file=pa-hpux.h
+			tm_file=pa/pa-hiux.h
 		fi
 		broken_install=yes
+		install_headers_dir=install-headers-cpio
 		use_collect2=yes
 		;;
 	we32k-att-sysv*)
 		cpu_type=we32k
 		use_collect2=yes
 		;;
+	h8300-*-*)
+		cpu_type=h8300
+		;;
+	sh-*-*)
+		cpu_type=sh
+		;;
+	alpha-dec-osf1.2)
+		extra_passes="mips-tfile mips-tdump"
+		tm_file=alpha/osf12.h
+		broken_install=yes
+		use_collect2=yes
+		;;
 	alpha-*-osf*)
-		cpu_type=alpha
+		if [ x$stabs = xyes ]
+		then
+			tm_file=alpha/alpha-gdb.h
+		fi
+		if [ x$gas != xyes ]
+		then
+			extra_passes="mips-tfile mips-tdump"
+		fi
 		broken_install=yes
 		use_collect2=yes
 		;;
 	i960-*-*)			# Default i960 environment.
 		use_collect2=yes
 		;;
+	clipper-intergraph-clix*)
+		broken_install=yes
+		cpu_type=clipper
+		xm_file=clipper/xm-clix.h
+		tm_file=clipper/clix.h
+		tmake_file=clipper/t-clix
+		xmake_file=clipper/x-clix
+		install_headers_dir=install-headers-cpio
+		;;
 	*)
 		echo "Configuration $machine not supported" 1>&2
 		exit 1
@@ -1068,17 +1593,26 @@ for machine in $canon_build $canon_host
 		fixincludes=fixinc.svr4
 		xmake_try_sysv=x-sysv
 		broken_install=yes
+		install_headers_dir=install-headers-cpio
 		;;
 	*-*-sysv*)
 		broken_install=yes
+		install_headers_dir=install-headers-cpio
 		;;
 	esac
 
 	# Distinguish i386 from i486.
+	# Also, do not run mips-tfile on MIPS if using gas.
 	case $machine in
 	i486-*-*)
 		target_cpu_default=2
 		;;
+	mips-*-*)
+		if [ x$gas = xyes ]
+		then
+			target_cpu_default=16
+		fi
+		;;
 	esac
 
 	# No need for collect2 if we have the GNU linker.
@@ -1097,21 +1631,25 @@ for machine in $canon_build $canon_host
 # Save data on host machine in vars host_xm_file and host_xmake_file.
 	if [ x$pass1done = x ]
 	then
-		if [ x$xm_file = x ]; then build_xm_file=xm-$cpu_type.h
+		if [ x$xm_file = x ]
+		then build_xm_file=$cpu_type/xm-$cpu_type.h
 		else build_xm_file=$xm_file
 		fi
 		pass1done=yes
 	else
 		if [ x$pass2done = x ]
 		then
-			if [ x$xm_file = x ]; then host_xm_file=xm-$cpu_type.h
+			if [ x$xm_file = x ]
+			then host_xm_file=$cpu_type/xm-$cpu_type.h
 			else host_xm_file=$xm_file
 			fi
 			if [ x$xmake_file = x ]
-			then xmake_file=x-$cpu_type
+			then xmake_file=$cpu_type/x-$cpu_type
 			fi
 			host_xmake_file=$xmake_file
 			host_broken_install=$broken_install
+			host_install_headers_dir=$install_headers_dir
+			host_truncate_target=$truncate_target
 			pass2done=yes
 		fi
 	fi
@@ -1119,28 +1657,36 @@ done
 
 # Default the target-machine variables that were not explicitly set.
 if [ x$tm_file = x ]
-then tm_file=$cpu_type.h; fi
+then tm_file=$cpu_type/$cpu_type.h; fi
 
 if [ x$header_files = x ]
 then header_files=; fi
 
 if [ x$xm_file = x ]
-then xm_file=xm-$cpu_type.h; fi
+then xm_file=$cpu_type/xm-$cpu_type.h; fi
 
-md_file=${cpu_type}.md
+md_file=$cpu_type/$cpu_type.md
 
 if [ x$out_file = x ]
-then out_file=$cpu_type.c; fi
+then out_file=$cpu_type/$cpu_type.c; fi
 
 if [ x$tmake_file = x ]
-then tmake_file=t-$cpu_type
+then tmake_file=$cpu_type/t-$cpu_type
 fi
 
-
 # Set up the list of links to be made.
 # $links is the list of link names, and $files is the list of names to link to.
-files="$host_xm_file $tm_file $md_file $out_file $xm_file $build_xm_file"
-links="config.h tm.h md aux-output.c tconfig.h hconfig.h"
+files="$host_xm_file $tm_file $out_file $xm_file $build_xm_file $md_file"
+links="config.h tm.h aux-output.c tconfig.h hconfig.h"
+
+if [ -n "${cpp_md_flags}" ] ; then
+	links="$links md.pre-cpp"
+else
+	links="$links md"
+fi
+
+rm -f config.bak
+if [ -f config.status ]; then mv -f config.status config.bak; fi
 
 # Make the links.
 while [ -n "$files" ]
@@ -1157,7 +1703,6 @@ do
 	fi
 
 	$remove -f $link
-	rm -f config.status
 	# Make a symlink if possible, otherwise try a hard link
 	$symbolic_link ${srcdir}/config/$file $link 2>/dev/null || $hard_link ${srcdir}/config/$file $link || $copy ${srcdir}/config/$file $link
 
@@ -1169,6 +1714,11 @@ do
 	echo "Linked \`$link' to \`${srcdir}/config/$file'"
 done
 
+# Truncate the target if necessary
+if [ x$host_truncate_target != x ]; then
+	target=`echo $target | sed -e 's/\(..............\).*/\1/'`
+fi
+
 # Create Makefile.tem from Makefile.in.
 # Make it set VPATH if necessary so that the sources are found.
 # Also change its value of srcdir.
@@ -1221,7 +1771,7 @@ fi
 
 # Set EXTRA_HEADERS according to header_files.
 # This substitutes for lots of t-* files.
-if [ x$header_files = x ]
+if [ "x$header_files" = x ]
 then true
 else
 	rm -f Makefile.xx
@@ -1230,6 +1780,17 @@ else
 	mv Makefile.xx Makefile.tem
 fi
 
+# Set EXTRA_PASSES according to extra_passes.
+# This substitutes for lots of t-* files.
+if [ "x$extra_passes" = x ]
+then true
+else
+	rm -f Makefile.xx
+	sed "s/^EXTRA_PASSES =/EXTRA_PASSES = $extra_passes/" Makefile.tem > Makefile.xx
+	rm -f Makefile.tem
+	mv Makefile.xx Makefile.tem
+fi
+
 # Add a definition of USE_COLLECT2 if system wants one.
 # Also tell toplev.c what to do.
 # This substitutes for lots of t-* files.
@@ -1249,8 +1810,19 @@ if [ x$target_cpu_default = x ]
 then true
 else
 	rm -f Makefile.xx
-	(echo "MAYBE_TARGET_DEFAULT = -DTARGET_CPU_DEFAULT=$target_cpu_default")\
- 	   | cat - Makefile.tem > Makefile.xx
+# This used cat, but rfg@netcom.com said that ran into NFS bugs.
+	sed -e "/^# Makefile for GNU C compiler./c\\
+MAYBE_TARGET_DEFAULT = -DTARGET_CPU_DEFAULT=$target_cpu_default\\
+\# Makefile for GNU C compiler." Makefile.tem > Makefile.xx
+	rm -f Makefile.tem
+	mv Makefile.xx Makefile.tem
+fi
+
+# Add a CPP_MD dependence if the real md file is in md.pre-cpp.
+if [ -n "${cpp_md_flags}" ] ; then
+	rm -f Makefile.xx
+	(echo "CPP_MD = md.pre-cpp cpp" ; echo "CPP_MD_FLAGS = $cpp_md_flags" ; echo "MD_FILE = md") \
+	  | cat - Makefile.tem > Makefile.xx
 	rm -f Makefile.tem
 	mv Makefile.xx Makefile.tem
 fi
@@ -1270,17 +1842,24 @@ else
 	tmake_file=../Makefile.in
 fi
 
+# Get the version number.
+version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < ${srcdir}/version.c`
+
 # Remove all formfeeds, since some Makes get confused by them.
 # Also arrange to give the variables `target', `host_xmake_file',
-# `tmake_file', `prefix', `exec_prefix' and `FIXINCLUDES'
-# values in the Makefile from the values they have in this script.
+# `tmake_file', `prefix', `local_prefix', `exec_prefix', `FIXINCLUDES'
+# and `INSTALL_HEADERS_DIR' values in the Makefile from the values
+# they have in this script.
 rm -f Makefile.xx
 sed -e "s///" -e "s/^target=.*$/target=${target}/" \
     -e "s|^xmake_file=.*$|xmake_file=${host_xmake_file}|" \
     -e "s|^tmake_file=.*$|tmake_file=${tmake_file}|" \
+    -e "s|^version=.*$|version=${version}|" \
     -e "s|^prefix[ 	]*=.*|prefix = $prefix|" \
+    -e "s|^local_prefix[ 	]*=.*|local_prefix = $local_prefix|" \
     -e "s|^exec_prefix[ 	]*=.*|exec_prefix = $exec_prefix|" \
     -e "s|^FIXINCLUDES[ 	]*=.*|FIXINCLUDES = $fixincludes|" \
+    -e "s|^INSTALL_HEADERS_DIR[ 	]*=.*$|INSTALL_HEADERS_DIR = ${host_install_headers_dir}|" \
     Makefile.tem > Makefile.xx
 rm -f Makefile.tem
 mv Makefile.xx Makefile.tem
@@ -1319,9 +1898,17 @@ fi
 # Make that file a shellscript which will reestablish the same configuration.
 echo "#!/bin/sh
 # GCC was configured as follows:
-${srcdir}/configure" $arguments > config.status
-echo echo host=$canon_host target=$canon_target build=$canon_build >> config.status
-chmod a+x config.status
+${srcdir}/configure" $arguments > config.new
+echo echo host=$canon_host target=$canon_target build=$canon_build >> config.new
+chmod a+x config.new
+if [ -f config.bak ] && cmp config.bak config.new >/dev/null 2>/dev/null;
+then
+	mv -f config.bak config.status
+	rm -f config.new
+else
+	mv -f config.new config.status
+	rm -f config.bak
+fi
 
 if [ x$canon_host = x$canon_target ]
 then