--- gcc/gcc.info-10 2018/04/24 17:55:51 1.1.1.3 +++ gcc/gcc.info-10 2018/04/24 18:00:53 1.1.1.4 @@ -1,4 +1,4 @@ -This is Info file gcc.info, produced by Makeinfo-1.47 from the input +This is Info file gcc.info, produced by Makeinfo-1.49 from the input file gcc.texi. This file documents the use and the internals of the GNU compiler. @@ -11,867 +11,1071 @@ preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also -that the sections entitled "GNU General Public License" and "Boycott" -are included exactly as in the original, and provided that the entire -resulting derived work is distributed under the terms of a permission -notice identical to this one. +that the sections entitled "GNU General Public License" and "Protect +Your Freedom--Fight `Look And Feel'" are included exactly as in the +original, and provided that the entire resulting derived work is +distributed under the terms of a permission notice identical to this +one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the sections entitled "GNU General Public -License" and "Boycott", and this permission notice, may be included in -translations approved by the Free Software Foundation instead of in the -original English. +License" and "Protect Your Freedom--Fight `Look And Feel'", and this +permission notice, may be included in translations approved by the Free +Software Foundation instead of in the original English.  -File: gcc.info, Node: RTL Template, Next: Output Template, Prev: Example, Up: Machine Desc +File: gcc.info, Node: Conversions, Next: RTL Declarations, Prev: Bit Fields, Up: RTL -RTL Template for Generating and Recognizing Insns -================================================= +Conversions +=========== - The RTL template is used to define which insns match the particular -pattern and how to find their operands. For named patterns, the RTL -template also says how to construct an insn from specified operands. - - Construction involves substituting specified operands into a copy of -the template. Matching involves determining the values that serve as -the operands in the insn being matched. Both of these activities are -controlled by special expression types that direct matching and -substitution of the operands. - -`(match_operand:M N PREDICATE CONSTRAINT)' - This expression is a placeholder for operand number N of the insn. - When constructing an insn, operand number N will be substituted - at this point. When matching an insn, whatever appears at this - position in the insn will be taken as operand number N; but it - must satisfy PREDICATE or this instruction pattern will not match - at all. - - Operand numbers must be chosen consecutively counting from zero in - each instruction pattern. There may be only one `match_operand' - expression in the pattern for each operand number. Usually - operands are numbered in the order of appearance in `match_operand' - expressions. - - PREDICATE is a string that is the name of a C function that - accepts two arguments, an expression and a machine mode. During - matching, the function will be called with the putative operand as - the expression and M as the mode argument (if M is not specified, - `VOIDmode' will be used, which normally causes PREDICATE to accept - any mode). If it returns zero, this instruction pattern fails to - match. PREDICATE may be an empty string; then it means no test is - to be done on the operand, so anything which occurs in this - position is valid. - - Most of the time, PREDICATE will reject modes other than M--but - not always. For example, the predicate `address_operand' uses M - as the mode of memory ref that the address should be valid for. - Many predicates accept `const_int' nodes even though their mode is - `VOIDmode'. - - CONSTRAINT controls reloading and the choice of the best register - class to use for a value, as explained later (*note - Constraints::.). - - People are often unclear on the difference between the constraint - and the predicate. The predicate helps decide whether a given - insn matches the pattern. The constraint plays no role in this - decision; instead, it controls various decisions in the case of an - insn which does match. - - On CISC machines, PREDICATE is most often `"general_operand"'. - This function checks that the putative operand is either a - constant, a register or a memory reference, and that it is valid - for mode M. - - For an operand that must be a register, PREDICATE should be - `"register_operand"'. It would be valid to use - `"general_operand"', since the reload pass would copy any - non-register operands through registers, but this would make GNU - CC do extra work, it would prevent invariant operands (such as - constant) from being removed from loops, and it would prevent the - register allocator from doing the best possible job. On RISC - machines, it is usually most efficient to allow PREDICATE to - accept only objects that the constraints allow. - - For an operand that must be a constant, either use - `"immediate_operand"' for PREDICATE, or make the instruction - pattern's extra condition require a constant, or both. You cannot - expect the constraints to do this work! If the constraints allow - only constants, but the predicate allows something else, the - compiler will crash when that case arises. - -`(match_scratch:M N CONSTRAINT)' - This expression is also a placeholder for operand number N and - indicates that operand must be a `scratch' or `reg' expression. - - When matching patterns, this is completely equivalent to - - (match_operand:M N "scratch_operand" PRED) - - but, when generating RTL, it produces a (`scratch':M) expression. - - If the last few expressions in a `parallel' are `clobber' - expressions whose operands are either a hard register or - `match_scratch', the combiner can add them when necessary. *Note - Side Effects::. - -`(match_dup N)' - This expression is also a placeholder for operand number N. It is - used when the operand needs to appear more than once in the insn. - - In construction, `match_dup' behaves exactly like `match_operand': - the operand is substituted into the insn being constructed. But - in matching, `match_dup' behaves differently. It assumes that - operand number N has already been determined by a `match_operand' - appearing earlier in the recognition template, and it matches only - an identical-looking expression. - -`(match_operator:M N PREDICATE [OPERANDS...])' - This pattern is a kind of placeholder for a variable RTL expression - code. - - When constructing an insn, it stands for an RTL expression whose - expression code is taken from that of operand N, and whose - operands are constructed from the patterns OPERANDS. - - When matching an expression, it matches an expression if the - function PREDICATE returns nonzero on that expression *and* the - patterns OPERANDS match the operands of the expression. - - Suppose that the function `commutative_operator' is defined as - follows, to match any expression whose operator is one of the - commutative arithmetic operators of RTL and whose mode is MODE: - - int - commutative_operator (x, mode) - rtx x; - enum machine_mode mode; - { - enum rtx_code code = GET_CODE (x); - if (GET_MODE (x) != mode) - return 0; - return GET_RTX_CLASS (code) == 'c' || code == EQ || code == NE; - } - - Then the following pattern will match any RTL expression consisting - of a commutative operator applied to two general operands: - - (match_operator:SI 3 "commutative_operator" - [(match_operand:SI 1 "general_operand" "g") - (match_operand:SI 2 "general_operand" "g")]) - - Here the vector `[OPERANDS...]' contains two patterns because the - expressions to be matched all contain two operands. - - When this pattern does match, the two operands of the commutative - operator are recorded as operands 1 and 2 of the insn. (This is - done by the two instances of `match_operand'.) Operand 3 of the - insn will be the entire commutative expression: use `GET_CODE - (operands[3])' to see which commutative operator was used. - - The machine mode M of `match_operator' works like that of - `match_operand': it is passed as the second argument to the - predicate function, and that function is solely responsible for - deciding whether the expression to be matched "has" that mode. - - When constructing an insn, argument 3 of the gen-function will - specify the operation (i.e. the expression code) for the - expression to be made. It should be an RTL expression, whose - expression code is copied into a new expression whose operands are - arguments 1 and 2 of the gen-function. The subexpressions of - argument 3 are not used; only its expression code matters. - - When `match_operator' is used in a pattern for matching an insn, - it usually best if the operand number of the `match_operator' is - higher than that of the actual operands of the insn. This improves - register allocation because the register allocator often looks at - operands 1 and 2 of insns to see if it can do register tying. - - There is no way to specify constraints in `match_operator'. The - operand of the insn which corresponds to the `match_operator' - never has any constraints because it is never reloaded as a whole. - However, if parts of its OPERANDS are matched by `match_operand' - patterns, those parts may have constraints of their own. - -`(match_parallel N PREDICATE [SUBPAT...])' - This pattern is a placeholder for an insn that consists of a - `parallel' expression with a variable number of elements. This - expression should only appear at the top level of an insn pattern. - - When constructing an insn, operand number N will be substituted at - this point. When matching an insn, it matches if the body of the - insn is a `parallel' expression with at least as many elements as - the vector of SUBPAT expressions in the `match_parallel', if each - SUBPAT matches the corresponding element of the `parallel', *and* - the function PREDICATE returns nonzero on the `parallel' that is - the body of the insn. It is the responsibility of the predicate - to validate elements of the `parallel' beyond those listed in the - `match_parallel'. - - A typical use of `match_parallel' is to match load and store - multiple expressions, which can contains a variable number of - elements in a `parallel'. For example, - - (define_insn "" - [(match_parallel 0 "load_multiple_operation" - [(set (match_operand:SI 1 "gen_reg_operand" "=r") - (match_operand:SI 2 "memory_operand" "m")) - (use (reg:SI 179)) - (clobber (reg:SI 179))])] - "" - "loadm 0,0,%1,%2") - - This example comes from `a29k.md'. The function - `load_multiple_operations' is defined in `a29k.c' and checks that - subsequent elements in the `parallel' are the same as the `set' in - the pattern, except that they are referencing subsequent registers - and memory locations. - - An insn that matches this pattern might look like: - - (parallel [(set (reg:SI 20) (mem:SI (reg:SI 100))) - (use (reg:SI 179)) - (clobber (reg:SI 179)) - (set (reg:SI 21) (mem:SI (plus:SI (reg:SI 100) (const_int 4)))) - (set (reg:SI 22) (mem:SI (plus:SI (reg:SI 100) (const_int 8))))]) - -`(address (match_operand:M N "address_operand" ""))' - This complex of expressions is a placeholder for an operand number - N in a "load address" instruction: an operand which specifies a - memory location in the usual way, but for which the actual operand - value used is the address of the location, not the contents of the - location. - - `address' expressions never appear in RTL code, only in machine - descriptions. And they are used only in machine descriptions that - do not use the operand constraint feature. When operand - constraints are in use, the letter `p' in the constraint serves - this purpose. - - M is the machine mode of the *memory location being addressed*, - not the machine mode of the address itself. That mode is always - the same on a given target machine (it is `Pmode', which normally - is `SImode'), so there is no point in mentioning it; thus, no - machine mode is written in the `address' expression. If some day - support is added for machines in which addresses of different - kinds of objects appear differently or are used differently (such - as the PDP-10), different formats would perhaps need different - machine modes and these modes might be written in the `address' - expression. + All conversions between machine modes must be represented by +explicit conversion operations. For example, an expression which is +the sum of a byte and a full word cannot be written as `(plus:SI +(reg:QI 34) (reg:SI 80))' because the `plus' operation requires two +operands of the same machine mode. Therefore, the byte-sized operand is +enclosed in a conversion operation, as in + + (plus:SI (sign_extend:SI (reg:QI 34)) (reg:SI 80)) + + The conversion operation is not a mere placeholder, because there +may be more than one way of converting from a given starting mode to +the desired final mode. The conversion operation code says how to do +it. + + For all conversion operations, X must not be `VOIDmode' because the +mode in which to do the conversion would not be known. The conversion +must either be done at compile-time or X must be placed into a register. + +`(sign_extend:M X)' + Represents the result of sign-extending the value X to machine + mode M. M must be a fixed-point mode and X a fixed-point value of + a mode narrower than M. + +`(zero_extend:M X)' + Represents the result of zero-extending the value X to machine + mode M. M must be a fixed-point mode and X a fixed-point value of + a mode narrower than M. + +`(float_extend:M X)' + Represents the result of extending the value X to machine mode M. + M must be a floating point mode and X a floating point value of a + mode narrower than M. + +`(truncate:M X)' + Represents the result of truncating the value X to machine mode M. + M must be a fixed-point mode and X a fixed-point value of a mode + wider than M. + +`(float_truncate:M X)' + Represents the result of truncating the value X to machine mode M. + M must be a floating point mode and X a floating point value of a + mode wider than M. + +`(float:M X)' + Represents the result of converting fixed point value X, regarded + as signed, to floating point mode M. + +`(unsigned_float:M X)' + Represents the result of converting fixed point value X, regarded + as unsigned, to floating point mode M. + +`(fix:M X)' + When M is a fixed point mode, represents the result of converting + floating point value X to mode M, regarded as signed. How + rounding is done is not specified, so this operation may be used + validly in compiling C code only for integer-valued operands. + +`(unsigned_fix:M X)' + Represents the result of converting floating point value X to + fixed point mode M, regarded as unsigned. How rounding is done is + not specified. + +`(fix:M X)' + When M is a floating point mode, represents the result of + converting floating point value X (valid for mode M) to an + integer, still represented in floating point mode M, by rounding + towards zero.  -File: gcc.info, Node: Output Template, Next: Output Statement, Prev: RTL Template, Up: Machine Desc +File: gcc.info, Node: RTL Declarations, Next: Side Effects, Prev: Conversions, Up: RTL -Output Templates and Operand Substitution -========================================= +Declarations +============ - The "output template" is a string which specifies how to output the -assembler code for an instruction pattern. Most of the template is a -fixed string which is output literally. The character `%' is used to -specify where to substitute an operand; it can also be used to identify -places where different variants of the assembler require different -syntax. - - In the simplest case, a `%' followed by a digit N says to output -operand N at that point in the string. - - `%' followed by a letter and a digit says to output an operand in an -alternate fashion. Four letters have standard, built-in meanings -described below. The machine description macro `PRINT_OPERAND' can -define additional letters with nonstandard meanings. - - `%cDIGIT' can be used to substitute an operand that is a constant -value without the syntax that normally indicates an immediate operand. - - `%nDIGIT' is like `%cDIGIT' except that the value of the constant is -negated before printing. - - `%aDIGIT' can be used to substitute an operand as if it were a -memory reference, with the actual operand treated as the address. This -may be useful when outputting a "load address" instruction, because -often the assembler syntax for such an instruction requires you to -write the operand as if it were a memory reference. - - `%lDIGIT' is used to substitute a `label_ref' into a jump -instruction. - - `%' followed by a punctuation character specifies a substitution that -does not use an operand. Only one case is standard: `%%' outputs a `%' -into the assembler code. Other nonstandard cases can be defined in the -`PRINT_OPERAND' macro. You must also define which punctuation -characters are valid with the `PRINT_OPERAND_PUNCT_VALID_P' macro. - - The template may generate multiple assembler instructions. Write -the text for the instructions, with `\;' between them. - - When the RTL contains two operands which are required by constraint -to match each other, the output template must refer only to the -lower-numbered operand. Matching operands are not always identical, and -the rest of the compiler arranges to put the proper RTL expression for -printing into the lower-numbered operand. - - One use of nonstandard letters or punctuation following `%' is to -distinguish between different assembler languages for the same machine; -for example, Motorola syntax versus MIT syntax for the 68000. Motorola -syntax requires periods in most opcode names, while MIT syntax does -not. For example, the opcode `movel' in MIT syntax is `move.l' in -Motorola syntax. The same file of patterns is used for both kinds of -output syntax, but the character sequence `%.' is used in each place -where Motorola syntax wants a period. The `PRINT_OPERAND' macro for -Motorola syntax defines the sequence to output a period; the macro for -MIT syntax defines it to do nothing. + Declaration expression codes do not represent arithmetic operations +but rather state assertions about their operands. - -File: gcc.info, Node: Output Statement, Next: Constraints, Prev: Output Template, Up: Machine Desc - -C Statements for Generating Assembler Output -============================================ +`(strict_low_part (subreg:M (reg:N R) 0))' + This expression code is used in only one context: as the + destination operand of a `set' expression. In addition, the + operand of this expression must be a non-paradoxical `subreg' + expression. - Often a single fixed template string cannot produce correct and -efficient assembler code for all the cases that are recognized by a -single instruction pattern. For example, the opcodes may depend on the -kinds of operands; or some unfortunate combinations of operands may -require extra machine instructions. - - If the output control string starts with a `@', then it is actually -a series of templates, each on a separate line. (Blank lines and -leading spaces and tabs are ignored.) The templates correspond to the -pattern's constraint alternatives (*note Multi-Alternative::.). For -example, if a target machine has a two-address add instruction `addr' -to add into a register and another `addm' to add a register to memory, -you might write this pattern: - - (define_insn "addsi3" - [(set (match_operand:SI 0 "general_operand" "=r,m") - (plus:SI (match_operand:SI 1 "general_operand" "0,0") - (match_operand:SI 2 "general_operand" "g,r")))] - "" - "@ - addr %1,%0 - addm %1,%0") - - If the output control string starts with a `*', then it is not an -output template but rather a piece of C program that should compute a -template. It should execute a `return' statement to return the -template-string you want. Most such templates use C string literals, -which require doublequote characters to delimit them. To include these -doublequote characters in the string, prefix each one with `\'. - - The operands may be found in the array `operands', whose C data type -is `rtx []'. - - It is very common to select different ways of generating assembler -code based on whether an immediate operand is within a certain range. -Be careful when doing this, because the result of `INTVAL' is an -integer on the host machine. If the host machine has more bits in an -`int' than the target machine has in the mode in which the constant -will be used, then some of the bits you get from `INTVAL' will be -superfluous. For proper results, you must carefully disregard the -values of those bits. - - It is possible to output an assembler instruction and then go on to -output or compute more of them, using the subroutine `output_asm_insn'. - This receives two arguments: a template-string and a vector of -operands. The vector may be `operands', or it may be another array of -`rtx' that you declare locally and initialize yourself. - - When an insn pattern has multiple alternatives in its constraints, -often the appearance of the assembler code is determined mostly by -which alternative was matched. When this is so, the C code can test -the variable `which_alternative', which is the ordinal number of the -alternative that was actually satisfied (0 for the first, 1 for the -second alternative, etc.). - - For example, suppose there are two opcodes for storing zero, `clrreg' -for registers and `clrmem' for memory locations. Here is how a pattern -could use `which_alternative' to choose between them: - - (define_insn "" - [(set (match_operand:SI 0 "general_operand" "=r,m") - (const_int 0))] - "" - "* - return (which_alternative == 0 - ? \"clrreg %0\" : \"clrmem %0\"); - ") - - The example above, where the assembler code to generate was *solely* -determined by the alternative, could also have been specified as -follows, having the output control string start with a `@': - - (define_insn "" - [(set (match_operand:SI 0 "general_operand" "=r,m") - (const_int 0))] - "" - "@ - clrreg %0 - clrmem %0") + The presence of `strict_low_part' says that the part of the + register which is meaningful in mode N, but is not part of mode M, + is not to be altered. Normally, an assignment to such a subreg is + allowed to have undefined effects on the rest of the register when + M is less than a word.  -File: gcc.info, Node: Constraints, Next: Standard Names, Prev: Output Statement, Up: Machine Desc +File: gcc.info, Node: Side Effects, Next: Incdec, Prev: RTL Declarations, Up: RTL -Operand Constraints -=================== +Side Effect Expressions +======================= - Each `match_operand' in an instruction pattern can specify a -constraint for the type of operands allowed. Constraints can say -whether an operand may be in a register, and which kinds of register; -whether the operand can be a memory reference, and which kinds of -address; whether the operand may be an immediate constant, and which -possible values it may have. Constraints can also require two operands -to match. + The expression codes described so far represent values, not actions. +But machine instructions never produce values; they are meaningful only +for their side effects on the state of the machine. Special expression +codes are used to represent side effects. + + The body of an instruction is always one of these side effect codes; +the codes described above, which represent values, appear only as the +operands of these. + +`(set LVAL X)' + Represents the action of storing the value of X into the place + represented by LVAL. LVAL must be an expression representing a + place that can be stored in: `reg' (or `subreg' or + `strict_low_part'), `mem', `pc' or `cc0'. + + If LVAL is a `reg', `subreg' or `mem', it has a machine mode; then + X must be valid for that mode. + + If LVAL is a `reg' whose machine mode is less than the full width + of the register, then it means that the part of the register + specified by the machine mode is given the specified value and the + rest of the register receives an undefined value. Likewise, if + LVAL is a `subreg' whose machine mode is narrower than the mode of + the register, the rest of the register can be changed in an + undefined way. + + If LVAL is a `strict_low_part' of a `subreg', then the part of the + register specified by the machine mode of the `subreg' is given + the value X and the rest of the register is not changed. + + If LVAL is `(cc0)', it has no machine mode, and X may be either a + `compare' expression or a value that may have any mode. The latter + case represents a "test" instruction. The expression `(set (cc0) + (reg:M N))' is equivalent to `(set (cc0) (compare (reg:M N) + (const_int 0)))'. Use the former expression to save space during + the compilation. + + If LVAL is `(pc)', we have a jump instruction, and the + possibilities for X are very limited. It may be a `label_ref' + expression (unconditional jump). It may be an `if_then_else' + (conditional jump), in which case either the second or the third + operand must be `(pc)' (for the case which does not jump) and the + other of the two must be a `label_ref' (for the case which does + jump). X may also be a `mem' or `(plus:SI (pc) Y)', where Y may + be a `reg' or a `mem'; these unusual patterns are used to + represent jumps through branch tables. + + If LVAL is neither `(cc0)' nor `(pc)', the mode of LVAL must not + be `VOIDmode' and the mode of X must be valid for the mode of LVAL. + + LVAL is customarily accessed with the `SET_DEST' macro and X with + the `SET_SRC' macro. + +`(return)' + As the sole expression in a pattern, represents a return from the + current function, on machines where this can be done with one + instruction, such as Vaxes. On machines where a multi-instruction + "epilogue" must be executed in order to return from the function, + returning is done by jumping to a label which precedes the + epilogue, and the `return' expression code is never used. + + Inside an `if_then_else' expression, represents the value to be + placed in `pc' to return to the caller. + + Note that an insn pattern of `(return)' is logically equivalent to + `(set (pc) (return))', but the latter form is never used. + +`(call FUNCTION NARGS)' + Represents a function call. FUNCTION is a `mem' expression whose + address is the address of the function to be called. NARGS is an + expression which can be used for two purposes: on some machines it + represents the number of bytes of stack argument; on others, it + represents the number of argument registers. + + Each machine has a standard machine mode which FUNCTION must have. + The machine description defines macro `FUNCTION_MODE' to expand + into the requisite mode name. The purpose of this mode is to + specify what kind of addressing is allowed, on machines where the + allowed kinds of addressing depend on the machine mode being + addressed. + +`(clobber X)' + Represents the storing or possible storing of an unpredictable, + undescribed value into X, which must be a `reg', `scratch' or + `mem' expression. + + One place this is used is in string instructions that store + standard values into particular hard registers. It may not be + worth the trouble to describe the values that are stored, but it + is essential to inform the compiler that the registers will be + altered, lest it attempt to keep data in them across the string + instruction. -* Menu: + If X is `(mem:BLK (const_int 0))', it means that all memory + locations must be presumed clobbered. -* Simple Constraints:: Basic use of constraints. -* Multi-Alternative:: When an insn has two alternative constraint-patterns. -* Class Preferences:: Constraints guide which hard register to put things in. -* Modifiers:: More precise control over effects of constraints. -* No Constraints:: Describing a clean machine without constraints. + Note that the machine description classifies certain hard + registers as "call-clobbered". All function call instructions are + assumed by default to clobber these registers, so there is no need + to use `clobber' expressions to indicate this fact. Also, each + function call is assumed to have the potential to alter any memory + location, unless the function is declared `const'. + + If the last group of expressions in a `parallel' are each a + `clobber' expression whose arguments are `reg' or `match_scratch' + (*note RTL Template::.) expressions, the combiner phase can add + the appropriate `clobber' expressions to an insn it has + constructed when doing so will cause a pattern to be matched. + + This feature can be used, for example, on a machine that whose + multiply and add instructions don't use an MQ register but which + has an add-accumulate instruction that does clobber the MQ + register. Similarly, a combined instruction might require a + temporary register while the constituent instructions might not. + + When a `clobber' expression for a register appears inside a + `parallel' with other side effects, the register allocator + guarantees that the register is unoccupied both before and after + that insn. However, the reload phase may allocate a register used + for one of the inputs unless the `&' constraint is specified for + the selected alternative (*note Modifiers::.). You can clobber + either a specific hard register, a pseudo register, or a `scratch' + expression; in the latter two cases, GNU CC will allocate a hard + register that is available there for use as a temporary. + + For instructions that require a temporary register, you should use + `scratch' instead of a pseudo-register because this will allow the + combiner phase to add the `clobber' when required. You do this by + coding (`clobber' (`match_scratch' ...)). If you do clobber a + pseudo register, use one which appears nowhere else--generate a + new one each time. Otherwise, you may confuse CSE. + + There is one other known use for clobbering a pseudo register in a + `parallel': when one of the input operands of the insn is also + clobbered by the insn. In this case, using the same pseudo + register in the clobber and elsewhere in the insn produces the + expected results. + +`(use X)' + Represents the use of the value of X. It indicates that the value + in X at this point in the program is needed, even though it may + not be apparent why this is so. Therefore, the compiler will not + attempt to delete previous instructions whose only effect is to + store a value in X. X must be a `reg' expression. + + During the delayed branch scheduling phase, X may be an insn. This + indicates that X previously was located at this place in the code + and its data dependencies need to be taken into account. These + `use' insns will be deleted before the delayed branch scheduling + phase exits. + +`(parallel [X0 X1 ...])' + Represents several side effects performed in parallel. The square + brackets stand for a vector; the operand of `parallel' is a vector + of expressions. X0, X1 and so on are individual side effect + expressions--expressions of code `set', `call', `return', + `clobber' or `use'. + + "In parallel" means that first all the values used in the + individual side-effects are computed, and second all the actual + side-effects are performed. For example, + + (parallel [(set (reg:SI 1) (mem:SI (reg:SI 1))) + (set (mem:SI (reg:SI 1)) (reg:SI 1))]) + + says unambiguously that the values of hard register 1 and the + memory location addressed by it are interchanged. In both places + where `(reg:SI 1)' appears as a memory address it refers to the + value in register 1 *before* the execution of the insn. + + It follows that it is *incorrect* to use `parallel' and expect the + result of one `set' to be available for the next one. For example, + people sometimes attempt to represent a jump-if-zero instruction + this way: + + (parallel [(set (cc0) (reg:SI 34)) + (set (pc) (if_then_else + (eq (cc0) (const_int 0)) + (label_ref ...) + (pc)))]) + + But this is incorrect, because it says that the jump condition + depends on the condition code value *before* this instruction, not + on the new value that is set by this instruction. + + Peephole optimization, which takes place together with final + assembly code output, can produce insns whose patterns consist of + a `parallel' whose elements are the operands needed to output the + resulting assembler code--often `reg', `mem' or constant + expressions. This would not be well-formed RTL at any other stage + in compilation, but it is ok then because no further optimization + remains to be done. However, the definition of the macro + `NOTICE_UPDATE_CC', if any, must deal with such insns if you + define any peephole optimizations. + +`(sequence [INSNS ...])' + Represents a sequence of insns. Each of the INSNS that appears in + the vector is suitable for appearing in the chain of insns, so it + must be an `insn', `jump_insn', `call_insn', `code_label', + `barrier' or `note'. + + A `sequence' RTX is never placed in an actual insn during RTL + generation. It represents the sequence of insns that result from a + `define_expand' *before* those insns are passed to `emit_insn' to + insert them in the chain of insns. When actually inserted, the + individual sub-insns are separated out and the `sequence' is + forgotten. + + After delay-slot scheduling is completed, an insn and all the + insns that reside in its delay slots are grouped together into a + `sequence'. The insn requiring the delay slot is the first insn in + the vector; subsequent insns are to be placed in the delay slot. + + `INSN_ANNULLED_BRANCH_P' is set on an insn in a delay slot to + indicate that a branch insn should be used that will conditionally + annul the effect of the insns in the delay slots. In such a case, + `INSN_FROM_TARGET_P' indicates that the insn is from the target of + the branch and should be executed only if the branch is taken; + otherwise the insn should be executed only if the branch is not + taken. *Note Delay Slots::. + + These expression codes appear in place of a side effect, as the body +of an insn, though strictly speaking they do not always describe side +effects as such: + +`(asm_input S)' + Represents literal assembler code as described by the string S. + +`(unspec [OPERANDS ...] INDEX)' +`(unspec_volatile [OPERANDS ...] INDEX)' + Represents a machine-specific operation on OPERANDS. INDEX + selects between multiple machine-specific operations. + `unspec_volatile' is used for volatile operations and operations + that may trap; `unspec' is used for other operations. + + These codes may appear inside a `pattern' of an insn, inside a + `parallel', or inside an expression. + +`(addr_vec:M [LR0 LR1 ...])' + Represents a table of jump addresses. The vector elements LR0, + etc., are `label_ref' expressions. The mode M specifies how much + space is given to each address; normally M would be `Pmode'. + +`(addr_diff_vec:M BASE [LR0 LR1 ...])' + Represents a table of jump addresses expressed as offsets from + BASE. The vector elements LR0, etc., are `label_ref' expressions + and so is BASE. The mode M specifies how much space is given to + each address-difference.  -File: gcc.info, Node: Simple Constraints, Next: Multi-Alternative, Prev: Constraints, Up: Constraints +File: gcc.info, Node: Incdec, Next: Assembler, Prev: Side Effects, Up: RTL -Simple Constraints ------------------- +Embedded Side-Effects on Addresses +================================== - The simplest kind of constraint is a string full of letters, each of -which describes one kind of operand that is permitted. Here are the -letters that are allowed: - -`m' - A memory operand is allowed, with any kind of address that the - machine supports in general. - -`o' - A memory operand is allowed, but only if the address is - "offsettable". This means that adding a small integer (actually, - the width in bytes of the operand, as determined by its machine - mode) may be added to the address and the result is also a valid - memory address. - - For example, an address which is constant is offsettable; so is an - address that is the sum of a register and a constant (as long as a - slightly larger constant is also within the range of - address-offsets supported by the machine); but an autoincrement or - autodecrement address is not offsettable. More complicated - indirect/indexed addresses may or may not be offsettable depending - on the other addressing modes that the machine supports. - - Note that in an output operand which can be matched by another - operand, the constraint letter `o' is valid only when accompanied - by both `<' (if the target machine has predecrement addressing) - and `>' (if the target machine has preincrement addressing). - -`V' - A memory operand that is not offsettable. In other words, - anything that would fit the `m' constraint but not the `o' - constraint. - -`<' - A memory operand with autodecrement addressing (either - predecrement or postdecrement) is allowed. - -`>' - A memory operand with autoincrement addressing (either - preincrement or postincrement) is allowed. + Four special side-effect expression codes appear as memory addresses. -`r' - A register operand is allowed provided that it is in a general - register. - -`d', `a', `f', ... - Other letters can be defined in machine-dependent fashion to stand - for particular classes of registers. `d', `a' and `f' are defined - on the 68000/68020 to stand for data, address and floating point - registers. - -`i' - An immediate integer operand (one with constant value) is allowed. - This includes symbolic constants whose values will be known only at - assembly time. - -`n' - An immediate integer operand with a known numeric value is allowed. - Many systems cannot support assembly-time constants for operands - less than a word wide. Constraints for these operands should use - `n' rather than `i'. - -`I', `J', `K', ... `P' - Other letters in the range `I' through `P' may be defined in a - machine-dependent fashion to permit immediate integer operands with - explicit integer values in specified ranges. For example, on the - 68000, `I' is defined to stand for the range of values 1 to 8. - This is the range permitted as a shift count in the shift - instructions. - -`E' - An immediate floating operand (expression code `const_double') is - allowed, but only if the target floating point format is the same - as that of the host machine (on which the compiler is running). - -`F' - An immediate floating operand (expression code `const_double') is - allowed. - -`G', `H' - `G' and `H' may be defined in a machine-dependent fashion to - permit immediate floating operands in particular ranges of values. - -`s' - An immediate integer operand whose value is not an explicit - integer is allowed. - - This might appear strange; if an insn allows a constant operand - with a value not known at compile time, it certainly must allow - any known value. So why use `s' instead of `i'? Sometimes it - allows better code to be generated. - - For example, on the 68000 in a fullword instruction it is possible - to use an immediate operand; but if the immediate value is between - -128 and 127, better code results from loading the value into a - register and using the register. This is because the load into - the register can be done with a `moveq' instruction. We arrange - for this to happen by defining the letter `K' to mean "any integer - outside the range -128 to 127", and then specifying `Ks' in the - operand constraints. - -`g' - Any register, memory or immediate integer operand is allowed, - except for registers that are not general registers. - -`X' - Any operand whatsoever is allowed, even if it does not satisfy - `general_operand'. This is normally used in the constraint of a - `match_scratch' when certain alternatives will not actually - require a scratch register. - -`0', `1', `2', ... `9' - An operand that matches the specified operand number is allowed. - If a digit is used together with letters within the same - alternative, the digit should come last. - - This is called a "matching constraint" and what it really means is - that the assembler has only a single operand that fills two roles - considered separate in the RTL insn. For example, an add insn has - two input operands and one output operand in the RTL, but on most - CISC machines an add instruction really has only two operands, one - of them an input-output operand: - - addl #35,r12 - - Matching constraints are used in these circumstances. More - precisely, the two operands that match must include one input-only - operand and one output-only operand. Moreover, the digit must be a - smaller number than the number of the operand that uses it in the - constraint. - - For operands to match in a particular case usually means that they - are identical-looking RTL expressions. But in a few special cases - specific kinds of dissimilarity are allowed. For example, `*x' as - an input operand will match `*x++' as an output operand. For - proper results in such cases, the output template should always - use the output-operand's number when printing the operand. - -`p' - An operand that is a valid memory address is allowed. This is for - "load address" and "push address" instructions. - - `p' in the constraint must be accompanied by `address_operand' as - the predicate in the `match_operand'. This predicate interprets - the mode specified in the `match_operand' as the mode of the memory - reference for which the address would be valid. - -`Q', `R', `S', ... `U' - Letters in the range `Q' through `U' may be defined in a - machine-dependent fashion to stand for arbitrary operand types. - The machine description macro `EXTRA_CONSTRAINT' is passed the - operand as its first argument and the constraint letter as its - second operand. - - A typical use for this would be to distinguish certain types of - memory references that affect other insn operands. - - Do not define these constraint letters to accept register - references (`reg'); the reload pass does not expect this and would - not handle it properly. - - In order to have valid assembler code, each operand must satisfy its -constraint. But a failure to do so does not prevent the pattern from -applying to an insn. Instead, it directs the compiler to modify the -code so that the constraint will be satisfied. Usually this is done by -copying an operand into a register. - - Contrast, therefore, the two instruction patterns that follow: - - (define_insn "" - [(set (match_operand:SI 0 "general_operand" "=r") - (plus:SI (match_dup 0) - (match_operand:SI 1 "general_operand" "r")))] - "" - "...") - -which has two operands, one of which must appear in two places, and - - (define_insn "" - [(set (match_operand:SI 0 "general_operand" "=r") - (plus:SI (match_operand:SI 1 "general_operand" "0") - (match_operand:SI 2 "general_operand" "r")))] - "" - "...") - -which has three operands, two of which are required by a constraint to -be identical. If we are considering an insn of the form - - (insn N PREV NEXT - (set (reg:SI 3) - (plus:SI (reg:SI 6) (reg:SI 109))) - ...) - -the first pattern would not apply at all, because this insn does not -contain two identical subexpressions in the right place. The pattern -would say, "That does not look like an add instruction; try other -patterns." The second pattern would say, "Yes, that's an add -instruction, but there is something wrong with it." It would direct -the reload pass of the compiler to generate additional insns to make -the constraint true. The results might look like this: - - (insn N2 PREV N - (set (reg:SI 3) (reg:SI 6)) - ...) - - (insn N N2 NEXT - (set (reg:SI 3) - (plus:SI (reg:SI 3) (reg:SI 109))) - ...) - - It is up to you to make sure that each operand, in each pattern, has -constraints that can handle any RTL expression that could be present for -that operand. (When multiple alternatives are in use, each pattern -must, for each possible combination of operand expressions, have at -least one alternative which can handle that combination of operands.) -The constraints don't need to *allow* any possible operand--when this is -the case, they do not constrain--but they must at least point the way to -reloading any possible operand so that it will fit. - - * If the constraint accepts whatever operands the predicate permits, - there is no problem: reloading is never necessary for this operand. - - For example, an operand whose constraints permit everything except - registers is safe provided its predicate rejects registers. - - An operand whose predicate accepts only constant values is safe - provided its constraints include the letter `i'. If any possible - constant value is accepted, then nothing less than `i' will do; if - the predicate is more selective, then the constraints may also be - more selective. - - * Any operand expression can be reloaded by copying it into a - register. So if an operand's constraints allow some kind of - register, it is certain to be safe. It need not permit all - classes of registers; the compiler knows how to copy a register - into another register of the proper class in order to make an - instruction valid. - - * A nonoffsettable memory reference can be reloaded by copying the - address into a register. So if the constraint uses the letter - `o', all memory references are taken care of. - - * A constant operand can be reloaded by allocating space in memory to - hold it as preinitialized data. Then the memory reference can be - used in place of the constant. So if the constraint uses the - letters `o' or `m', constant operands are not a problem. - - * If the constraint permits a constant and a pseudo register used in - an insn was not allocated to a hard register and is equivalent to - a constant, the register will be replaced with the constant. If - the predicate does not permit a constant and the insn is - re-recognized for some reason, the compiler will crash. Thus the - predicate must always recognize any objects allowed by the - constraint. - - If the operand's predicate can recognize registers, but the -constraint does not permit them, it can make the compiler crash. When -this operand happens to be a register, the reload pass will be stymied, -because it does not know how to copy a register temporarily into memory. +`(pre_dec:M X)' + Represents the side effect of decrementing X by a standard amount + and represents also the value that X has after being decremented. + X must be a `reg' or `mem', but most machines allow only a `reg'. + M must be the machine mode for pointers on the machine in use. + The amount X is decremented by is the length in bytes of the + machine mode of the containing memory reference of which this + expression serves as the address. Here is an example of its use: + + (mem:DF (pre_dec:SI (reg:SI 39))) + + This says to decrement pseudo register 39 by the length of a + `DFmode' value and use the result to address a `DFmode' value. + +`(pre_inc:M X)' + Similar, but specifies incrementing X instead of decrementing it. + +`(post_dec:M X)' + Represents the same side effect as `pre_dec' but a different + value. The value represented here is the value X has before being + decremented. + +`(post_inc:M X)' + Similar, but specifies incrementing X instead of decrementing it. + + These embedded side effect expressions must be used with care. +Instruction patterns may not use them. Until the `flow' pass of the +compiler, they may occur only to represent pushes onto the stack. The +`flow' pass finds cases where registers are incremented or decremented +in one instruction and used as an address shortly before or after; +these cases are then transformed to use pre- or post-increment or +-decrement. + + If a register used as the operand of these expressions is used in +another address in an insn, the original value of the register is used. +Uses of the register outside of an address are not permitted within the +same insn as a use in an embedded side effect expression because such +insns behave differently on different machines and hence must be treated +as ambiguous and disallowed. + + An instruction that can be represented with an embedded side effect +could also be represented using `parallel' containing an additional +`set' to describe how the address register is altered. This is not +done because machines that allow these operations at all typically +allow them wherever a memory address is called for. Describing them as +additional parallel stores would require doubling the number of entries +in the machine description.  -File: gcc.info, Node: Multi-Alternative, Next: Class Preferences, Prev: Simple Constraints, Up: Constraints +File: gcc.info, Node: Assembler, Next: Insns, Prev: IncDec, Up: RTL -Multiple Alternative Constraints --------------------------------- +Assembler Instructions as Expressions +===================================== - Sometimes a single instruction has multiple alternative sets of -possible operands. For example, on the 68000, a logical-or instruction -can combine register or an immediate value into memory, or it can -combine any kind of operand into a register; but it cannot combine one -memory location into another. - - These constraints are represented as multiple alternatives. An -alternative can be described by a series of letters for each operand. -The overall constraint for an operand is made from the letters for this -operand from the first alternative, a comma, the letters for this -operand from the second alternative, a comma, and so on until the last -alternative. Here is how it is done for fullword logical-or on the -68000: - - (define_insn "iorsi3" - [(set (match_operand:SI 0 "general_operand" "=m,d") - (ior:SI (match_operand:SI 1 "general_operand" "%0,0") - (match_operand:SI 2 "general_operand" "dKs,dmKs")))] - ...) - - The first alternative has `m' (memory) for operand 0, `0' for -operand 1 (meaning it must match operand 0), and `dKs' for operand 2. -The second alternative has `d' (data register) for operand 0, `0' for -operand 1, and `dmKs' for operand 2. The `=' and `%' in the -constraints apply to all the alternatives; their meaning is explained -in the next section (*note Class Preferences::.). - - If all the operands fit any one alternative, the instruction is -valid. Otherwise, for each alternative, the compiler counts how many -instructions must be added to copy the operands so that that -alternative applies. The alternative requiring the least copying is -chosen. If two alternatives need the same amount of copying, the one -that comes first is chosen. These choices can be altered with the `?' -and `!' characters: - -`?' - Disparage slightly the alternative that the `?' appears in, as a - choice when no alternative applies exactly. The compiler regards - this alternative as one unit more costly for each `?' that appears - in it. - -`!' - Disparage severely the alternative that the `!' appears in. This - alternative can still be used if it fits without reloading, but if - reloading is needed, some other alternative will be used. - - When an insn pattern has multiple alternatives in its constraints, -often the appearance of the assembler code is determined mostly by which -alternative was matched. When this is so, the C code for writing the -assembler code can use the variable `which_alternative', which is the -ordinal number of the alternative that was actually satisfied (0 for -the first, 1 for the second alternative, etc.). *Note Output -Statement::. + The RTX code `asm_operands' represents a value produced by a +user-specified assembler instruction. It is used to represent an `asm' +statement with arguments. An `asm' statement with a single output +operand, like this: + + asm ("foo %1,%2,%0" : "=a" (outputvar) : "g" (x + y), "di" (*z)); + +is represented using a single `asm_operands' RTX which represents the +value that is stored in `outputvar': + + (set RTX-FOR-OUTPUTVAR + (asm_operands "foo %1,%2,%0" "a" 0 + [RTX-FOR-ADDITION-RESULT RTX-FOR-*Z] + [(asm_input:M1 "g") + (asm_input:M2 "di")])) + +Here the operands of the `asm_operands' RTX are the assembler template +string, the output-operand's constraint, the index-number of the output +operand among the output operands specified, a vector of input operand +RTX's, and a vector of input-operand modes and constraints. The mode +M1 is the mode of the sum `x+y'; M2 is that of `*z'. + + When an `asm' statement has multiple output values, its insn has +several such `set' RTX's inside of a `parallel'. Each `set' contains a +`asm_operands'; all of these share the same assembler template and +vectors, but each contains the constraint for the respective output +operand. They are also distinguished by the output-operand index +number, which is 0, 1, ... for successive output operands.  -File: gcc.info, Node: Class Preferences, Next: Modifiers, Prev: Multi-Alternative, Up: Constraints +File: gcc.info, Node: Insns, Next: Calls, Prev: Assembler, Up: RTL -Register Class Preferences --------------------------- +Insns +===== - The operand constraints have another function: they enable the -compiler to decide which kind of hardware register a pseudo register is -best allocated to. The compiler examines the constraints that apply to -the insns that use the pseudo register, looking for the -machine-dependent letters such as `d' and `a' that specify classes of -registers. The pseudo register is put in whichever class gets the most -"votes". The constraint letters `g' and `r' also vote: they vote in -favor of a general register. The machine description says which -registers are considered general. + The RTL representation of the code for a function is a doubly-linked +chain of objects called "insns". Insns are expressions with special +codes that are used for no other purpose. Some insns are actual +instructions; others represent dispatch tables for `switch' statements; +others represent labels to jump to or various sorts of declarative +information. + + In addition to its own specific data, each insn must have a unique +id-number that distinguishes it from all other insns in the current +function (after delayed branch scheduling, copies of an insn with the +same id-number may be present in multiple places in a function, but +these copies will always be identical and will only appear inside a +`sequence'), and chain pointers to the preceding and following insns. +These three fields occupy the same position in every insn, independent +of the expression code of the insn. They could be accessed with `XEXP' +and `XINT', but instead three special macros are always used: + +`INSN_UID (I)' + Accesses the unique id of insn I. + +`PREV_INSN (I)' + Accesses the chain pointer to the insn preceding I. If I is the + first insn, this is a null pointer. + +`NEXT_INSN (I)' + Accesses the chain pointer to the insn following I. If I is the + last insn, this is a null pointer. + + The first insn in the chain is obtained by calling `get_insns'; the +last insn is the result of calling `get_last_insn'. Within the chain +delimited by these insns, the `NEXT_INSN' and `PREV_INSN' pointers must +always correspond: if INSN is not the first insn, + + NEXT_INSN (PREV_INSN (INSN)) == INSN + +is always true and if INSN is not the last insn, + + PREV_INSN (NEXT_INSN (INSN)) == INSN + +is always true. + + After delay slot scheduling, some of the insns in the chain might be +`sequence' expressions, which contain a vector of insns. The value of +`NEXT_INSN' in all but the last of these insns is the next insn in the +vector; the value of `NEXT_INSN' of the last insn in the vector is the +same as the value of `NEXT_INSN' for the `sequence' in which it is +contained. Similar rules apply for `PREV_INSN'. + + This means that the above invariants are not necessarily true for +insns inside `sequence' expressions. Specifically, if INSN is the +first insn in a `sequence', `NEXT_INSN (PREV_INSN (INSN))' is the insn +containing the `sequence' expression, as is the value of `PREV_INSN +(NEXT_INSN (INSN))' is INSN is the last insn in the `sequence' +expression. You can use these expressions to find the containing +`sequence' expression. + + Every insn has one of the following six expression codes: + +`insn' + The expression code `insn' is used for instructions that do not + jump and do not do function calls. `sequence' expressions are + always contained in insns with code `insn' even if one of those + insns should jump or do function calls. + + Insns with code `insn' have four additional fields beyond the three + mandatory ones listed above. These four are described in a table + below. + +`jump_insn' + The expression code `jump_insn' is used for instructions that may + jump (or, more generally, may contain `label_ref' expressions). If + there is an instruction to return from the current function, it is + recorded as a `jump_insn'. + + `jump_insn' insns have the same extra fields as `insn' insns, + accessed in the same way and in addition contains a field + `JUMP_LABEL' which is defined once jump optimization has completed. + + For simple conditional and unconditional jumps, this field + contains the `code_label' to which this insn will (possibly + conditionally) branch. In a more complex jump, `JUMP_LABEL' + records one of the labels that the insn refers to; the only way to + find the others is to scan the entire body of the insn. + + Return insns count as jumps, but since they do not refer to any + labels, they have zero in the `JUMP_LABEL' field. + +`call_insn' + The expression code `call_insn' is used for instructions that may + do function calls. It is important to distinguish these + instructions because they imply that certain registers and memory + locations may be altered unpredictably. + + A `call_insn' insn may be preceded by insns that contain a single + `use' expression and be followed by insns the contain a single + `clobber' expression. If so, these `use' and `clobber' + expressions are treated as being part of the function call. There + must not even be a `note' between the `call_insn' and the `use' or + `clobber' insns for this special treatment to take place. This is + somewhat of a kludge and will be removed in a later version of GNU + CC. + + `call_insn' insns have the same extra fields as `insn' insns, + accessed in the same way. + +`code_label' + A `code_label' insn represents a label that a jump insn can jump + to. It contains two special fields of data in addition to the + three standard ones. `CODE_LABEL_NUMBER' is used to hold the + "label number", a number that identifies this label uniquely among + all the labels in the compilation (not just in the current + function). Ultimately, the label is represented in the assembler + output as an assembler label, usually of the form `LN' where N is + the label number. + + When a `code_label' appears in an RTL expression, it normally + appears within a `label_ref' which represents the address of the + label, as a number. + + The field `LABEL_NUSES' is only defined once the jump optimization + phase is completed and contains the number of times this label is + referenced in the current function. + +`barrier' + Barriers are placed in the instruction stream when control cannot + flow past them. They are placed after unconditional jump + instructions to indicate that the jumps are unconditional and + after calls to `volatile' functions, which do not return (e.g., + `exit'). They contain no information beyond the three standard + fields. + +`note' + `note' insns are used to represent additional debugging and + declarative information. They contain two nonstandard fields, an + integer which is accessed with the macro `NOTE_LINE_NUMBER' and a + string accessed with `NOTE_SOURCE_FILE'. + + If `NOTE_LINE_NUMBER' is positive, the note represents the + position of a source line and `NOTE_SOURCE_FILE' is the source + file name that the line came from. These notes control generation + of line number data in the assembler output. + + Otherwise, `NOTE_LINE_NUMBER' is not really a line number but a + code with one of the following values (and `NOTE_SOURCE_FILE' must + contain a null pointer): + + `NOTE_INSN_DELETED' + Such a note is completely ignorable. Some passes of the + compiler delete insns by altering them into notes of this + kind. + + `NOTE_INSN_BLOCK_BEG' + `NOTE_INSN_BLOCK_END' + These types of notes indicate the position of the beginning + and end of a level of scoping of variable names. They + control the output of debugging information. + + `NOTE_INSN_LOOP_BEG' + `NOTE_INSN_LOOP_END' + These types of notes indicate the position of the beginning + and end of a `while' or `for' loop. They enable the loop + optimizer to find loops quickly. + + `NOTE_INSN_LOOP_CONT' + Appears at the place in a loop that `continue' statements + jump to. + + `NOTE_INSN_LOOP_VTOP' + This note indicates the place in a loop where the exit test + begins for those loops in which the exit test has been + duplicated. This position becomes another virtual start of + the loop when considering loop invariants. + + `NOTE_INSN_FUNCTION_END' + Appears near the end of the function body, just before the + label that `return' statements jump to (on machine where a + single instruction does not suffice for returning). This + note may be deleted by jump optimization. + + `NOTE_INSN_SETJMP' + Appears following each call to `setjmp' or a related function. + + These codes are printed symbolically when they appear in debugging + dumps. + + The machine mode of an insn is normally `VOIDmode', but some phases +use the mode for various purposes; for example, the reload pass sets it +to `HImode' if the insn needs reloading but not register elimination +and `QImode' if both are required. The common subexpression +elimination pass sets the mode of an insn to `QImode' when it is the +first insn in a block that has already been processed. + + Here is a table of the extra fields of `insn', `jump_insn' and +`call_insn' insns: + +`PATTERN (I)' + An expression for the side effect performed by this insn. This + must be one of the following codes: `set', `call', `use', + `clobber', `return', `asm_input', `asm_output', `addr_vec', + `addr_diff_vec', `trap_if', `unspec', `unspec_volatile', + `parallel', or `sequence'. If it is a `parallel', each element of + the `parallel' must be one these codes, except that `parallel' + expressions cannot be nested and `addr_vec' and `addr_diff_vec' + are not permitted inside a `parallel' expression. + +`INSN_CODE (I)' + An integer that says which pattern in the machine description + matches this insn, or -1 if the matching has not yet been + attempted. + + Such matching is never attempted and this field remains -1 on an + insn whose pattern consists of a single `use', `clobber', + `asm_input', `addr_vec' or `addr_diff_vec' expression. + + Matching is also never attempted on insns that result from an `asm' + statement. These contain at least one `asm_operands' expression. + The function `asm_noperands' returns a non-negative value for such + insns. + + In the debugging output, this field is printed as a number + followed by a symbolic representation that locates the pattern in + the `md' file as some small positive or negative offset from a + named pattern. + +`LOG_LINKS (I)' + A list (chain of `insn_list' expressions) giving information about + dependencies between instructions within a basic block. Neither a + jump nor a label may come between the related insns. + +`REG_NOTES (I)' + A list (chain of `expr_list' and `insn_list' expressions) giving + miscellaneous information about the insn. It is often information + pertaining to the registers used in this insn. + + The `LOG_LINKS' field of an insn is a chain of `insn_list' +expressions. Each of these has two operands: the first is an insn, and +the second is another `insn_list' expression (the next one in the +chain). The last `insn_list' in the chain has a null pointer as second +operand. The significant thing about the chain is which insns appear +in it (as first operands of `insn_list' expressions). Their order is +not significant. + + This list is originally set up by the flow analysis pass; it is a +null pointer until then. Flow only adds links for those data +dependencies which can be used for instruction combination. For each +insn, the flow analysis pass adds a link to insns which store into +registers values that are used for the first time in this insn. The +instruction scheduling pass adds extra links so that every dependence +will be represented. Links represent data dependencies, +antidependencies and output dependencies; the machine mode of the link +distinguishes these three types: antidependencies have mode +`REG_DEP_ANTI', output dependencies have mode `REG_DEP_OUTPUT', and +data dependencies have mode `VOIDmode'. + + The `REG_NOTES' field of an insn is a chain similar to the +`LOG_LINKS' field but it includes `expr_list' expressions in addition +to `insn_list' expressions. There are several kinds of register notes, +which are distinguished by the machine mode, which in a register note +is really understood as being an `enum reg_note'. The first operand OP +of the note is data whose meaning depends on the kind of note. + + The macro `REG_NOTE_KIND (X)' returns the kind of register note. +Its counterpart, the macro `PUT_REG_NOTE_KIND (X, NEWKIND)' sets the +register note type of X to be NEWKIND. + + Register notes are of three classes: They may say something about an +input to an insn, they may say something about an output of an insn, or +they may create a linkage between two insns. There are also a set of +values that are only used in `LOG_LINKS'. + + These register notes annotate inputs to an insn: + +`REG_DEAD' + The value in OP dies in this insn; that is to say, altering the + value immediately after this insn would not affect the future + behavior of the program. + + This does not necessarily mean that the register OP has no useful + value after this insn since it may also be an output of the insn. + In such a case, however, a `REG_DEAD' note would be redundant and + is usually not present until after the reload pass, but no code + relies on this fact. + +`REG_INC' + The register OP is incremented (or decremented; at this level + there is no distinction) by an embedded side effect inside this + insn. This means it appears in a `post_inc', `pre_inc', `post_dec' + or `pre_dec' expression. + +`REG_NONNEG' + The register OP is known to have a nonnegative value when this + insn is reached. This is used so that decrement and branch until + zero instructions, such as the m68k dbra, can be matched. + + The `REG_NONNEG' note is added to insns only if the machine + description contains a pattern named + `decrement_and_branch_until_zero'. + +`REG_NO_CONFLICT' + This insn does not cause a conflict between OP and the item being + set by this insn even though it might appear that it does. In + other words, if the destination register and OP could otherwise be + assigned the same register, this insn does not prevent that + assignment. + + Insns with this note are usually part of a block that begins with a + `clobber' insn specifying a multi-word pseudo register (which will + be the output of the block), a group of insns that each set one + word of the value and have the `REG_NO_CONFLICT' note attached, + and a final insn that copies the output to itself with an attached + `REG_EQUAL' note giving the expression being computed. This block + is encapsulated with `REG_LIBCALL' and `REG_RETVAL' notes on the + first and last insns, respectively. + +`REG_LABEL' + This insn uses OP, a `code_label', but is not a `jump_insn'. The + presence of this note allows jump optimization to be aware that OP + is, in fact, being used. + + The following notes describe attributes of outputs of an insn: + +`REG_EQUIV' +`REG_EQUAL' + This note is only valid on an insn that sets only one register and + indicates that that register will be equal to OP at run time; the + scope of this equivalence differs between the two types of notes. + The value which the insn explicitly copies into the register may + look different from OP, but they will be equal at run time. If the + output of the single `set' is a `strict_low_part' expression, the + note refers to the register that is contained in `SUBREG_REG' of + the `subreg' expression. + + For `REG_EQUIV', the register is equivalent to OP throughout the + entire function, and could validly be replaced in all its + occurrences by OP. ("Validly" here refers to the data flow of the + program; simple replacement may make some insns invalid.) For + example, when a constant is loaded into a register that is never + assigned any other value, this kind of note is used. + + When a parameter is copied into a pseudo-register at entry to a + function, a note of this kind records that the register is + equivalent to the stack slot where the parameter was passed. + Although in this case the register may be set by other insns, it + is still valid to replace the register by the stack slot + throughout the function. + + In the case of `REG_EQUAL', the register that is set by this insn + will be equal to OP at run time at the end of this insn but not + necessarily elsewhere in the function. In this case, OP is + typically an arithmetic expression. For example, when a sequence + of insns such as a library call is used to perform an arithmetic + operation, this kind of note is attached to the insn that produces + or copies the final value. + + These two notes are used in different ways by the compiler passes. + `REG_EQUAL' is used by passes prior to register allocation (such as + common subexpression elimination and loop optimization) to tell + them how to think of that value. `REG_EQUIV' notes are used by + register allocation to indicate that there is an available + substitute expression (either a constant or a `mem' expression for + the location of a parameter on the stack) that may be used in + place of a register if insufficient registers are available. + + Except for stack homes for parameters, which are indicated by a + `REG_EQUIV' note and are not useful to the early optimization + passes and pseudo registers that are equivalent to a memory + location throughout there entire life, which is not detected until + later in the compilation, all equivalences are initially indicated + by an attached `REG_EQUAL' note. In the early stages of register + allocation, a `REG_EQUAL' note is changed into a `REG_EQUIV' note + if OP is a constant and the insn represents the only set of its + destination register. + + Thus, compiler passes prior to register allocation need only check + for `REG_EQUAL' notes and passes subsequent to register allocation + need only check for `REG_EQUIV' notes. + +`REG_UNUSED' + The register OP being set by this insn will not be used in a + subsequent insn. This differs from a `REG_DEAD' note, which + indicates that the value in an input will not be used subsequently. + These two notes are independent; both may be present for the same + register. - Of course, on some machines all registers are equivalent, and no -register classes are defined. Then none of this complexity is relevant. +`REG_WAS_0' + The single output of this insn contained zero before this insn. OP + is the insn that set it to zero. You can rely on this note if it + is present and OP has not been deleted or turned into a `note'; + its absence implies nothing. + + These notes describe linkages between insns. They occur in pairs: +one insn has one of a pair of notes that points to a second insn, which +has the inverse note pointing back to the first insn. + +`REG_RETVAL' + This insn copies the value of a multi-insn sequence (for example, a + library call), and OP is the first insn of the sequence (for a + library call, the first insn that was generated to set up the + arguments for the library call). + + Loop optimization uses this note to treat such a sequence as a + single operation for code motion purposes and flow analysis uses + this note to delete such sequences whose results are dead. + + A `REG_EQUAL' note will also usually be attached to this insn to + provide the expression being computed by the sequence. + +`REG_LIBCALL' + This is the inverse of `REG_RETVAL': it is placed on the first + insn of a multi-insn sequence, and it points to the last one. + +`REG_CC_SETTER' +`REG_CC_USER' + On machines that use `cc0', the insns which set and use `cc0' set + and use `cc0' are adjacent. However, when branch delay slot + filling is done, this may no longer be true. In this case a + `REG_CC_USER' note will be placed on the insn setting `cc0' to + point to the insn using `cc0' and a `REG_CC_SETTER' note will be + placed on the insn using `cc0' to point to the insn setting `cc0'. + + These values are only used in the `LOG_LINKS' field, and indicate +the type of dependency that each link represents. Links which indicate +a data dependence (a read after write dependence) do not use any code, +they simply have mode `VOIDmode', and are printed without any +descriptive text. + +`REG_DEP_ANTI' + This indicates an anti dependence (a write after read dependence). + +`REG_DEP_OUTPUT' + This indicates an output dependence (a write after write + dependence). + + For convenience, the machine mode in an `insn_list' or `expr_list' +is printed using these symbolic codes in debugging dumps. + + The only difference between the expression codes `insn_list' and +`expr_list' is that the first operand of an `insn_list' is assumed to +be an insn and is printed in debugging dumps as the insn's unique id; +the first operand of an `expr_list' is printed in the ordinary way as +an expression.  -File: gcc.info, Node: Modifiers, Next: No Constraints, Prev: Class Preferences, Up: Constraints +File: gcc.info, Node: Calls, Next: Sharing, Prev: Insns, Up: RTL -Constraint Modifier Characters ------------------------------- +RTL Representation of Function-Call Insns +========================================= -`=' - Means that this operand is write-only for this instruction: the - previous value is discarded and replaced by output data. + Insns that call subroutines have the RTL expression code `call_insn'. +These insns must satisfy special rules, and their bodies must use a +special RTL expression code, `call'. + + A `call' expression has two operands, as follows: + + (call (mem:FM ADDR) NBYTES) + +Here NBYTES is an operand that represents the number of bytes of +argument data being passed to the subroutine, FM is a machine mode +(which must equal as the definition of the `FUNCTION_MODE' macro in the +machine description) and ADDR represents the address of the subroutine. + + For a subroutine that returns no value, the `call' expression as +shown above is the entire body of the insn, except that the insn might +also contain `use' or `clobber' expressions. + + For a subroutine that returns a value whose mode is not `BLKmode', +the value is returned in a hard register. If this register's number is +R, then the body of the call insn looks like this: + + (set (reg:M R) + (call (mem:FM ADDR) NBYTES)) + +This RTL expression makes it clear (to the optimizer passes) that the +appropriate register receives a useful value in this insn. + + When a subroutine returns a `BLKmode' value, it is handled by +passing to the subroutine the address of a place to store the value. So +the call insn itself does not "return" any value, and it has the same +RTL form as a call that returns nothing. + + On some machines, the call instruction itself clobbers some register, +for example to contain the return address. `call_insn' insns on these +machines should have a body which is a `parallel' that contains both +the `call' expression and `clobber' expressions that indicate which +registers are destroyed. Similarly, if the call instruction requires +some register other than the stack pointer that is not explicitly +mentioned it its RTL, a `use' subexpression should mention that +register. + + Functions that are called are assumed to modify all registers listed +in the configuration macro `CALL_USED_REGISTERS' (*note Register +Basics::.) and, with the exception of `const' functions and library +calls, to modify all of memory. + + Insns containing just `use' expressions directly precede the +`call_insn' insn to indicate which registers contain inputs to the +function. Similarly, if registers other than those in +`CALL_USED_REGISTERS' are clobbered by the called function, insns +containing a single `clobber' follow immediately after the call to +indicate which registers. -`+' - Means that this operand is both read and written by the - instruction. + +File: gcc.info, Node: Sharing, Prev: Calls, Up: RTL - When the compiler fixes up the operands to satisfy the constraints, - it needs to know which operands are inputs to the instruction and - which are outputs from it. `=' identifies an output; `+' - identifies an operand that is both input and output; all other - operands are assumed to be input only. - -`&' - Means (in a particular alternative) that this operand is written - before the instruction is finished using the input operands. - Therefore, this operand may not lie in a register that is used as - an input operand or as part of any memory address. - - `&' applies only to the alternative in which it is written. In - constraints with multiple alternatives, sometimes one alternative - requires `&' while others do not. See, for example, the `movdf' - insn of the 68000. - - `&' does not obviate the need to write `='. - -`%' - Declares the instruction to be commutative for this operand and the - following operand. This means that the compiler may interchange - the two operands if that is the cheapest way to make all operands - fit the constraints. This is often used in patterns for addition - instructions that really have only two operands: the result must - go in one of the arguments. Here for example, is how the 68000 - halfword-add instruction is defined: - - (define_insn "addhi3" - [(set (match_operand:HI 0 "general_operand" "=m,r") - (plus:HI (match_operand:HI 1 "general_operand" "%0,0") - (match_operand:HI 2 "general_operand" "di,g")))] - ...) - -`#' - Says that all following characters, up to the next comma, are to be - ignored as a constraint. They are significant only for choosing - register preferences. - -`*' - Says that the following character should be ignored when choosing - register preferences. `*' has no effect on the meaning of the - constraint as a constraint, and no effect on reloading. - - Here is an example: the 68000 has an instruction to sign-extend a - halfword in a data register, and can also sign-extend a value by - copying it into an address register. While either kind of - register is acceptable, the constraints on an address-register - destination are less strict, so it is best if register allocation - makes an address register its goal. Therefore, `*' is used so - that the `d' constraint letter (for data register) is ignored when - computing register preferences. - - (define_insn "extendhisi2" - [(set (match_operand:SI 0 "general_operand" "=*d,a") - (sign_extend:SI - (match_operand:HI 1 "general_operand" "0,g")))] - ...) +Structure Sharing Assumptions +============================= + + The compiler assumes that certain kinds of RTL expressions are +unique; there do not exist two distinct objects representing the same +value. In other cases, it makes an opposite assumption: that no RTL +expression object of a certain kind appears in more than one place in +the containing structure. + + These assumptions refer to a single function; except for the RTL +objects that describe global variables and external functions, and a +few standard objects such as small integer constants, no RTL objects +are common to two functions. + + * Each pseudo-register has only a single `reg' object to represent + it, and therefore only a single machine mode. + + * For any symbolic label, there is only one `symbol_ref' object + referring to it. + + * There is only one `const_int' expression with value 0, only one + with value 1, and only one with value -1. Some other integer + values are also stored uniquely. + + * There is only one `pc' expression. + + * There is only one `cc0' expression. + + * There is only one `const_double' expression with value 0 for each + floating point mode. Likewise for values 1 and 2. + + * No `label_ref' or `scratch' appears in more than one place in the + RTL structure; in other words, it is safe to do a tree-walk of all + the insns in the function and assume that each time a `label_ref' + or `scratch' is seen it is distinct from all others that are seen. + + * Only one `mem' object is normally created for each static variable + or stack slot, so these objects are frequently shared in all the + places they appear. However, separate but equal objects for these + variables are occasionally made. + + * When a single `asm' statement has multiple output operands, a + distinct `asm_operands' expression is made for each output operand. + However, these all share the vector which contains the sequence of + input operands. This sharing is used later on to test whether two + `asm_operands' expressions come from the same statement, so all + optimizations must carefully preserve the sharing if they copy the + vector at all. + + * No RTL object appears in more than one place in the RTL structure + except as described above. Many passes of the compiler rely on + this by assuming that they can modify RTL objects in place without + unwanted side-effects on other insns. + + * During initial RTL generation, shared structure is freely + introduced. After all the RTL for a function has been generated, + all shared structure is copied by `unshare_all_rtl' in + `emit-rtl.c', after which the above rules are guaranteed to be + followed. + + * During the combiner pass, shared structure within an insn can exist + temporarily. However, the shared structure is copied before the + combiner is finished with the insn. This is done by calling + `copy_rtx_if_shared', which is a subroutine of `unshare_all_rtl'.  -File: gcc.info, Node: No Constraints, Prev: Modifiers, Up: Constraints +File: gcc.info, Node: Machine Desc, Next: Target Macros, Prev: RTL, Up: Top + +Machine Descriptions +******************** -Not Using Constraints ---------------------- + A machine description has two parts: a file of instruction patterns +(`.md' file) and a C header file of macro definitions. + + The `.md' file for a target machine contains a pattern for each +instruction that the target machine supports (or at least each +instruction that is worth telling the compiler about). It may also +contain comments. A semicolon causes the rest of the line to be a +comment, unless the semicolon is inside a quoted string. + + See the next chapter for information on the C header file. + +* Menu: - Some machines are so clean that operand constraints are not -required. For example, on the Vax, an operand valid in one context is -valid in any other context. On such a machine, every operand -constraint would be `g', excepting only operands of "load address" -instructions which are written as if they referred to a memory -location's contents but actual refer to its address. They would have -constraint `p'. - - For such machines, instead of writing `g' and `p' for all the -constraints, you can choose to write a description with empty -constraints. Then you write `""' for the constraint in every -`match_operand'. Address operands are identified by writing an -`address' expression around the `match_operand', not by their -constraints. - - When the machine description has just empty constraints, certain -parts of compilation are skipped, making the compiler faster. However, -few machines actually do not need constraints; all machine descriptions -now in existence use constraints. +* Patterns:: How to write instruction patterns. +* Example:: An explained example of a `define_insn' pattern. +* RTL Template:: The RTL template defines what insns match a pattern. +* Output Template:: The output template says how to make assembler code + from such an insn. +* Output Statement:: For more generality, write C code to output + the assembler code. +* Constraints:: When not all operands are general operands. +* Standard Names:: Names mark patterns to use for code generation. +* Pattern Ordering:: When the order of patterns makes a difference. +* Dependent Patterns:: Having one pattern may make you need another. +* Jump Patterns:: Special considerations for patterns for jump insns. +* Insn Canonicalizations::Canonicalization of Instructions +* Peephole Definitions::Defining machine-specific peephole optimizations. +* Expander Definitions::Generating a sequence of several RTL insns + for a standard operation. +* Insn Splitting:: Splitting Instructions into Multiple Instructions +* Insn Attributes:: Specifying the value of attributes for generated insns.  \ No newline at end of file